Benutzeranleitung / Produktwartung 110 des Produzenten Garmin
Zur Seite of 110
® 110 2-way radio & personal navigator ® owner’ s manual.
© Copyright 2002–2005 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
Rino ® 1 10 Owner ’s Manual i I NTRODUCTION Thank you for choosing the Garmin ® Rino ® 1 10 ( R adio I ntegrated with N avigation for the O utdoors). T o get the most from your new Rino 1 10, read through the Quick Start Guide first, then this Owner ’ s Manual to understand all of the operating features.
ii Rino ® 1 10 Owner ’s Manual I NTRODUCTION > T ABLE OF C ONTENTS Introduction ............................................................. i Getting to Know Y our Rino 1 10 ............................ 1 Front of the Rino 1 10 ...............
Rino ® 1 10 Owner ’s Manual iii I NTRODUCTION > T ABLE OF C ONTENTS Main Menu Options ..................................................... 34 Page Sequence Setup ............................................. 34 Shortcuts Menu ..................
iv Rino ® 1 10 Owner ’s Manual I NTRODUCTION > T ABLE OF C ONTENTS Area Calculator ....................................................... 78 Games ..................................................................... 79 Memory Race ............
Rino ® 1 10 Owner ’s Manual 1 G ETTING S T ARTED > G ETTING TO K NOW Y OUR R INO 1 10 G ETTING TO K NOW Y OUR R INO 1 10 The Rino 1 10 (Radio Integrated with Navigation for the Outdoors) is a 7.
2 Rino ® 1 10 Owner ’s Manual G ETTING S T ARTED > F RONT OF THE R INO 1 10 Front of the Rino 1 10 Power button: • Pr ess and hold to turn the unit On/Off • Pr ess to adjust contrast and bac.
Rino ® 1 10 Owner ’s Manual 3 G ETTING S T ARTED > B ACK OF THE R INO 1 10 Back of the Rino 1 10 2-way FRS/GMRS Antenna Headset Connector with Weather cap External Power And Data Connector with .
4 Rino ® 1 10 Owner ’s Manual G ETTING S T ARTED > M AIN P AGE S EQUENCE Main Page Sequence All of the information you need to operate the Rino 1 10 can be found on five default main pages (or display screens). Press and release the Page key to cycle through the Radio Page, Map Page, Navigation Page, T rip Computer , and Main Menu Page.
Rino ® 1 10 Owner ’s Manual 5 G ETTING S T ARTED > O PERA TING THE R INO 1 10 Operating the Rino 1 10 For best results, you should initialize the GPS receiver in your Rino 1 10 unit before you use it the first time. Refer to the “Initializing the Rino 1 10” section later in this manual for instructions on initializing the unit.
6 Rino ® 1 10 Owner ’s Manual G ETTING S T ARTED > S T A TUS B AR O VERVIEW Status Bar Overview The Status Bar at the top of the screen displays on all the available Main Pages. As you move around any of the Main Pages, the current page’ s title briefly displays (3 seconds) and then is replaced by the Status Bar .
Rino ® 1 10 Owner ’s Manual 7 U NIT O PERA TION > R ADIO P AGE U NIT O PERA TION Radio Page The Radio Page is the first of the default Main Pages. This page provides the user interface for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations.
8 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R ADIO P AGE Using My ID and Symbol Fields The My ID field allows you to enter a name and symbol that appears on other Rino units as you communicate with them. Y ou may enter a name using a combination of up to 10 letters, numbers, or spaces.
Rino ® 1 10 Owner ’s Manual 9 U NIT O PERA TION > R ADIO P AGE T o change the user symbol: 1. Using the Thumb Stick , highlight the face symbol to the right of the My ID field. Press the Thumb Stick In to show a list of available face symbols (icons).
10 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R ADIO P AGE Setting the Channel and Squelch Code The Rino 1 10 has a total of 22 channels and 38 squelch codes to select from using the Channel and Code fields. Channels 1–14 are FRS channels and 15–22 are GMRS channels (disabled by default in U.
Rino ® 1 10 Owner ’s Manual 1 1 U NIT O PERA TION > R ADIO P AGE Setting the squelch code to 0 (squelch code off) allows you to hear all activity on the selected channel, but you must be set to the same squelch code as the other person(s) to transmit back.
12 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R ADIO P AGE Scanning and Monitoring The Scan option allows you to scan through the available channels for voice activity . As the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning.
Rino ® 1 10 Owner ’s Manual 13 U NIT O PERA TION > R ADIO P AGE T o scan or monitor a channel(s): 1. Using the Thumb Stick , highlight the Scan or Monitor button and then press In. Scan starts searching through the available channels. Monitor opens the channel to listen to any radio transmissions on that channel.
14 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R ADIO P AGE Radio Page Option Menu The Radio Page Option Menu allows you to customize aspects of your Rino 1 10, such as setting up the radio, programming call and ring tones, and setting up a scanlist.
Rino ® 1 10 Owner ’s Manual 15 U NIT O PERA TION > R ADIO P AGE Headset T ype —allows you to choose which accessory headset or microphone you are using with the unit, or have the unit automatically detect the type.
16 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R ADIO P AGE Setup Scanlist Refer to “Scanning and Monitoring” previously in this manual for complete information about this feature and the options in this page. Turn Radio/GPS On/Of f Press the Thumb Stick In on either of these two options to toggle them from on to off.
Rino ® 1 10 Owner ’s Manual 17 U NIT O PERA TION > R ADIO P AGE Mark Waypoint’ s Indicators The Mark W aypoint figure displays several dif ferent icons, depending on what you are doing.
18 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > U SING THE R INO 1 10 R ADIO F EA TURES Using the Rino 1 10 Radio Features Y our Rino 1 10 unit provides many features to enhance your radio experience, such as transmitting locations and receiving contact information.
Rino ® 1 10 Owner ’s Manual 19 U NIT O PERA TION > U SING THE R INO 1 10 R ADIO F EA TURES The Rino 1 10 can manage up to 50 contacts at any time. Each time you receive a signal from a contact, your map is updated showing their new position. A T rack Log of their movement is created and shown on your map (see the “T rack Logs” section).
20 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > U SING THE R INO 1 10 R ADIO F EA TURES T o review a contact and contact details: 1. From the Map Page, highlight the desired contact on the Contact Bar and press the Thumb Stick In.
Rino ® 1 10 Owner ’s Manual 21 U NIT O PERA TION > U SING THE R INO 1 10 R ADIO F EA TURES Sending a Location Another handy feature is the ability to send a specific location to other Rino users. This comes in handy when you are trying to round up the group or you want to meet at a specific location.
22 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > M AP P AGE Map Page The Map Page displays your present position and direction of movement using a triangular Position Icon that is centered on the map. As you travel the map display leaves a “trail” (track log) of your movements.
Rino ® 1 10 Owner ’s Manual 23 U NIT O PERA TION > M AP P AGE T o view a Contact from the Map Page: 1. Highlight the desired Contact icon using the Thumb Stick . As you highlight the contact on the Contact Bar , the Map Page centers the map on that contact and displays its name, direction, and distance near the top of the screen.
24 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > M AP P AGE Map Page Options Map Page options allow a variety of operating and custom features for your Rino 1 10. The Map Page options are listed below . Highlight an option then press the Thumb Stick In to select.
Rino ® 1 10 Owner ’s Manual 25 U NIT O PERA TION > M AP P AGE Using the Pan Map Option The Map Page pan function allows you to display an arrow used to point at and identify items on the map, and to move the map in order to view areas beyond the current viewing area on the display .
26 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > M AP P AGE Programming the Data Fields Select Show ... Data Fields to view four optional Data Fields on the right side of the screen that can be programmed to provide a variety of travel and navigation information.
Rino ® 1 10 Owner ’s Manual 27 U NIT O PERA TION > M AP P AGE Setting up the Map Setup Map displays the five Map Setup Pages, each accessed by an on-screen button. General Setup Sub-Page Buttons Lines Setup Points Setup T ext Setup Map Data Setup Setup Items Options T o use Map Setup options: 1.
28 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > M AP P AGE Tracks Setup Saved T racks and T rack Log —scale options; Of f, Auto, or 20 ft.–500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data display only at certain zoom scales.
Rino ® 1 10 Owner ’s Manual 29 U NIT O PERA TION > N A VIGA TION P AGE Navigation Page The Navigation Page provides active guidance with a rotating compass ring that shows your course (track) while you are moving and a bearing pointer to indicate the current direction to your destination (bearing) relative to the course.
30 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > N A VIGA TION P AGE While you are navigating a route, the pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point when you get within 15 seconds Estimated T ime of Arrival of the current point.
Rino ® 1 10 Owner ’s Manual 31 U NIT O PERA TION > N A VIGA TION P AGE Navigation Page Options Stop Navigation —cancels navigation. “Grayed out” or disabled unless you are navigating on a Goto, T rack, or Route.
32 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > T RIP C OMPUTER P AGE T rip Computer Page The T rip Computer Page by default displays up to seven different types of navigation data.
Rino ® 1 10 Owner ’s Manual 33 U NIT O PERA TION > M AIN M ENU P AGE Main Menu Page The Main Menu provides access to additional Rino 1 10 feature pages. The pages listed below provide enhancements to Rino 1 10 operation. Press the Page key repeatedly to cycle to the Main Menu or select it from the Main Page Menu at the top of each main page.
34 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > M AIN M ENU P AGE Alarm Clock —provides a settable 24-hour alarm clock. Calculator —provides a calculator feature available in two forms: Standard or Scientific. Stopwatch Page —allows you to use the unit as a stopwatch, including a lap timer .
Rino ® 1 10 Owner ’s Manual 35 U NIT O PERA TION > M AIN M ENU P AGE T o insert a new page, highlight the page you wish to insert it before and press In. Select Insert , then choose a page from the list and press the Thumb Stick In. T o remove a page in the order , highlight the page and press In.
36 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > W A YPOINTS W aypoints There are numerous ways to create, edit, and use waypoints. The Mark W aypoint Page and the Find ‘N Go Menu are two common pages for creating and editing waypoint. Y ou can also create a waypoint using the Map Page.
Rino ® 1 10 Owner ’s Manual 37 U NIT O PERA TION > W A YPOINTS Creating W aypoints There are many ways to create a waypoint. Y ou can use any of the methods listed below . T o create a waypoint for a map feature: 1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it.
38 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > W A YPOINTS Projecting a W aypoint Projecting a waypoint from any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected from that map item.
Rino ® 1 10 Owner ’s Manual 39 U NIT O PERA TION > W A YPOINTS T o delete a waypoint or contact: 1. Use the Find ‘N Go feature to display the point. 2. Highlight the Delete button and then press the Thumb Stick In. Confirm the deletion. Deleting a waypoint T o move a waypoint by dragging it: 1.
40 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > F IND 'N G O Find ‘N Go The Find ‘N Go Menu allows you to find stored locations (waypoints) and cities.
Rino ® 1 10 Owner ’s Manual 41 U NIT O PERA TION > F IND 'N G O Finding a W aypoint W aypoints that you have created and stored in the Rino 1 10 can be found by selecting the W aypoint option from the Find ‘N Go Menu.
42 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > F IND 'N G O T o find a waypoint by name: 1. Use the Thumb Stick to select W aypoint from the Find ‘N Go Menu. Press the Thumb Stick In to select By Name from the pop-up menu. Press the Thumb Stick In to display the W aypoints List.
Rino ® 1 10 Owner ’s Manual 43 U NIT O PERA TION > F IND 'N G O Finding a Contact Contacts that you have received in the Rino 1 10 can be found by selecting the Contacts option from the Find ‘N Go Menu. Contact List T o find a contact: 1.
44 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > F IND 'N G O Finding a City Cities can be found by selecting the Cities option of the Find ‘N Go Menu, selecting the city from the list of Nearest or By Name , and then displaying the City Information Page.
Rino ® 1 10 Owner ’s Manual 45 U NIT O PERA TION > F IND 'N G O Finding a Point of Interest Y ou can use the Find Points of Interest option to locate a nearby restaurant, lodging, landmark, public building, park, etc. However , you must have transferred a MapSource Points of Interest (POI) to the unit map database.
46 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > F IND 'N G O T o find a point of interest: 1. Use the Thumb Stick to highlight Points of Interest and then press it In to display the Points of Interest Categories List. 2. Use the Thumb Stick to select the desired category and then press it In to display the T ypes List.
Rino ® 1 10 Owner ’s Manual 47 U NIT O PERA TION > F IND 'N G O Finding a Last Found Place Y ou can use the Recently Found Places option to locate Points of Interest, Cities, W aypoints or Contacts, Intersections, and other locations you have recently retrieved.
48 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > U SING A G OTO Using a Goto The Goto function allows you to create a direct route to a destination (waypoint, city , or point of interest).
Rino ® 1 10 Owner ’s Manual 49 U NIT O PERA TION > R OUTE P AGE Route Page Route navigation allows you to create a sequence of intermediate waypoints that leads you to your final destination. The Rino 1 10 stores 20 routes, each with up to 50 waypoints.
50 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R OUTE P AGE T o add a Find ‘N Go Menu item to a route: 1. Select an item from the Find ‘N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact’s position is updated, or it may be saved as a W aypoint to serve as a stationary point.
Rino ® 1 10 Owner ’s Manual 51 U NIT O PERA TION > R OUTE P AGE T o copy the route: 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu. 2. Highlight the Copy Route option and then press the Thumb Stick In to copy .
52 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R OUTE P AGE Route point r eview options 3. With the new point highlighted, press the Thumb Stick In to display the Information Page for the new point and then select the on-screen OK button to add it the route.
Rino ® 1 10 Owner ’s Manual 53 U NIT O PERA TION > R OUTE P AGE Adding or Editing from the Route Map Page Y ou can use the panning arrow with the Route Map Page displayed to add or edit route waypoints. T o add a point at either end of a route: 1.
54 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > R OUTE P AGE T o review or remove a route point: 1. Select the Route from the list of routes. Press the Thumb Stick In to display the Route Page. 2. Use the Thumb Stick to highlight Map and press In to display the route on the map.
Rino ® 1 10 Owner ’s Manual 55 U NIT O PERA TION > R OUTE P AGE Stopping Navigation T o stop navigation, highlight the Stop Navigation option on either the Navigation or Map Page’ s Option Menu or select the Stop button on the Route Page.
56 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > T RACKS P AGE T racks Page The Rino 1 10 draws an electronic bread crumb trail on the Map Page as you travel along. This bread crumb trail is the T rack Log. The T rack Log contains information about points along its path, including time and position.
Rino ® 1 10 Owner ’s Manual 57 U NIT O PERA TION > T RACKS P AGE Using the T racBack Feature The T racBack feature allows you to return along a traveled path (or another Rino user ’ s path) without marking any waypoints.
58 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > T RACKS P AGE T o use the T racBack feature: 1. Highlight the T racback button on the T racks Page and press the Thumb Stick In. The T racback Menu options ( T o Beginning and T o End ) are displayed.
Rino ® 1 10 Owner ’s Manual 59 U NIT O PERA TION > P ROXIMITY P AGE Proximity Page The Proximity Page lets you define an alarm circle around a stored waypoint/contact position, and can be used to help you avoid dangerous areas or to alert you when you have strayed too far away from other Rino users.
60 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S A TELLITE P AGE Satellite Page The Satellite Page provides a picture of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates. T o access the Satellite Page: 1.
Rino ® 1 10 Owner ’s Manual 61 U NIT O PERA TION > S A TELLITE P AGE W AAS The W ide Area Augmentation System (W AAS) capability produces a more accurate position fix.
62 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S A TELLITE P AGE Satellite Page Options Satellite Page Option Menu T o select the Use With GPS Off option: 1. Use the Thumb Stick to highlight the Option Menu button at the top of the page and then press it In.
Rino ® 1 10 Owner ’s Manual 63 U NIT O PERA TION > S ETUP P AGES Setup Pages The Setup Pages allow you to customize the Rino 1 10 to your personal preferences. Y ou can choose time settings, units of measure, display backlighting and contrast settings, heading measurement, interface options and system operating mode.
64 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S ETUP P AGES Time Zone —can be set to one of the eight US T ime Zones or 24 International T ime Zones (nearest city or geographical region). Select Other so you can enter the UTC T ime Offset.
Rino ® 1 10 Owner ’s Manual 65 U NIT O PERA TION > S ETUP P AGES Position Format —allows you to choose from different grid formats. The default position format, hddd°mm. mmm displays the latitude and longitude in degrees and minutes and is most commonly used.
66 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S ETUP P AGES Map Datum —offers a selection of nearly all map datums in common use. Every map is based on a map datum (a reference model of the earth’ s shape) and is usually listed in the title block of the map.
Rino ® 1 10 Owner ’s Manual 67 U NIT O PERA TION > S ETUP P AGES T o access the Display Setup Page: 1. Press the Page key or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Setup . 3. Select the Display icon to open the Display Setup Page.
68 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S ETUP P AGES Display —allows you to choose from Cardinal Letters, Degrees or Mils. North Reference —you can choose from T rue, Magnetic, Grid or User options. If User is chosen, you must correct for the Magnetic V ariation.
Rino ® 1 10 Owner ’s Manual 69 U NIT O PERA TION > S ETUP P AGES NMEA In/NMEA Out —supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plotting with MapSource or 3rd party programs. T ext Out —allows ASCII text output of location and velocity information without input capabilities.
70 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S ETUP P AGES System Setup Page The System Setup Page allows you to change GPS operation modes, use the W AAS capabilities, turn the Message Beep on or off, and choose the battery type. See the “Appendix” for W AAS capability information.
Rino ® 1 10 Owner ’s Manual 71 U NIT O PERA TION > C ALENDAR Calendar This feature provides you with a monthly calendar with programmable reference notes. Y ou can display one monthly calendar at a time and add reference notes using the data entry keypad.
72 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > C ALENDAR T o edit or delete a note: 1. T o edit or delete a note previously created, highlight the date and press the Thumb Stick In. 2. Select Edit Note , or Delete Note , from the pop-up menu.
Rino ® 1 10 Owner ’s Manual 73 U NIT O PERA TION > A LARM C LOCK Alarm Clock This feature provides an alarm for the system clock. Enter a time in the time field and turn the alarm on and off from the control field menu. Remember to enter alarm times in the same time format (UTC or local) you are using for your system.
74 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > C ALCULA TOR Calculator This feature provides you with all the basic functions of both a standard or scientific calculator . Y ou can perform most calculations identified by the function symbols along the sides of the keypad and can save the results temporarily in the memory .
Rino ® 1 10 Owner ’s Manual 75 U NIT O PERA TION > S TOPWA TCH Stopwatch This feature allows you to use the unit as a stopwatch, including using it as a lap timer . Y ou may also have the unit record the lap time based on distance. For example, if you set the lap distance to one mile, the unit records the time it takes you to travel one mile.
76 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > S UN & M OON Sun & Moon This feature provides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset.
Rino ® 1 10 Owner ’s Manual 77 U NIT O PERA TION > H UNT & F ISH Hunt & Fish This feature provides you with a listing of best times for hunting and fishing for a chosen location and date. T o access the Hunt & Fish Page: 1. Press the Page key or the Menu icon to open the Main Menu.
78 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > A REA C ALCULA TOR Area Calculator This feature provides you an area calculation as you move about a location or view a saved track. The area calculation displays in acres, hectares, and square feet, square yards, square meters, square kilometers, and square miles.
Rino ® 1 10 Owner ’s Manual 79 U NIT O PERA TION > G AMES Games The Games Page includes Memory Race, W aypoint Bomber , Clothesline, and Assimilation. Highlight the appropriate icon and then press the Thumb Stick In to play the desired game. Brief instructions are displayed when you start each game.
80 Rino ® 1 10 Owner ’s Manual U NIT O PERA TION > G AMES Either have a timed game with the winner being the one with the least amount of hits on their radio, or play until someone gets a specified number of hits (that person loses).
Rino ® 1 10 Owner ’s Manual 81 A PPENDIX > S PECIFICA TIONS Specifications Physical Case: Fully-gasketed, high-impact plastic alloy , waterproof to IPX7 standards (waterproof to one meter for 30 minutes) Size: 4.5” H x 2.3” W x 1.6” D; 7” H with antenna (1 1.
82 Rino ® 1 10 Owner ’s Manual A PPENDIX > S PECIFICA TIONS Radio Channels: 1–14 FRS, 15–22 GMRS (requires FCC license in the U.S.) Squelch Codes: 1–38 Range: Up to 2 miles on FRS; up to 5 miles on GMRS Radio Output Power: FRS 0.5 watt; GMRS 1.
Rino ® 1 10 Owner ’s Manual 83 A PPENDIX > A CCESSORIES Accessories T o obtain accessories, see your local dealer or visit the Garmin W eb site at www .garmin.com. 12-V olt Adapter Cable —provides unit power from an automobile cigarette lighter .
84 Rino ® 1 10 Owner ’s Manual A PPENDIX > T RANSFERRING M AP S OURCE D A T A T ransferring MapSource Data If you have purchased a Garmin MapSource CD-ROM mapping program, you may want to transfer detailed data before beginning use to provide your unit with maximum Find features.
Rino ® 1 10 Owner ’s Manual 85 A PPENDIX > W HA T IS FRS? What is FRS? FRS, or Family Radio Service, is a UHF radio frequency band allocated by the FCC for general public use. The operating frequency ranges from 462.5625 to 467.7125 MHz, with a maximum transmitting power of one half watt.
86 Rino ® 1 10 Owner ’s Manual A PPENDIX > W HA T IS FRS? Channel scan allows your FRS radio to scan all FRS frequencies for signals. After scanning briefly to see what channels other users are on, simply set your FRS radios to an unused channel and enjoy less interference.
Rino ® 1 10 Owner ’s Manual 87 A PPENDIX > GPS T ROUBLESHOOTING G UIDE GPS T roubleshooting Guide Symptom Probable Cause Remedy Unit does not turn on. Batteries are exhausted. Replace batteries. Unit does not turn on, even with new batteries. Batteries may be installed backwards.
88 Rino ® 1 10 Owner ’s Manual A PPENDIX > R ADIO T ROUBLESHOOTING G UIDE Radio T roubleshooting Guide Symbol Probable Cause Remedy Radio not transmitting T alk key may not be fully depressed Press and hold T alk key until done talking. FRS/GMRS Radio feature may not be on.
Rino ® 1 10 Owner ’s Manual 89 A PPENDIX > F REQUENCY C HARTS Frequency Charts Channel # T ransmit Frequency (MHz) Channel # T ransmit Frequency 1 462.5625 12 467.6625 2 462.5875 13 467.6875 3 462.6125 14 467.7125 4 462.6375 15 (GMRS) 462.5500 5 462.
90 Rino ® 1 10 Owner ’s Manual A PPENDIX > D A T A F IELD D EFINITIONS Data Field Definitions The following data field options are available on the Map, Navigation, Altimeter, and T rip Computer Pages. Bearing —the direction from your current location to a destination.
Rino ® 1 10 Owner ’s Manual 91 A PPENDIX > D A T A F IELD D EFINITIONS Speed —display rate of travel in miles per hour , kilometers per hour , or nautical miles per hour . Sunrise —the time at which the sun rises on this day . Sunset —the time at which the sun sets on this day .
92 Rino ® 1 10 Owner ’s Manual A PPENDIX > I NTERF ACE I NFORMA TION Interface Information Interface formats are selected in the Setup Interface Page. See also the “T ransferring MapSource Data” section of this Appendix for information on using the Rino 1 10 with MapSource.
Rino ® 1 10 Owner ’s Manual 93 A PPENDIX > S AFETY AND P RODUCT I NFORMA TION Safety and Product Information FCC Compliance Information The Rino 1 10 complies with Part 15 of the FCC regulations and with Canadian RSS-210 and ICES-003 for Class B digital devices.
94 Rino ® 1 10 Owner ’s Manual A PPENDIX > S AFETY AND P RODUCT I NFORMA TION Y ou can file Form 605 online at http://wireless.fcc.gov/uls/. A filing fee, which may change from time to time, is associated with this application. For information on fees, see the FCC fee information W eb page at http://wireless.
Rino ® 1 10 Owner ’s Manual 95 A PPENDIX > S AFETY AND P RODUCT I NFORMA TION T o obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number . The unit should be securely packed with the tracking number clearly written on the outside of the package.
96 Rino ® 1 10 Owner ’s Manual A PPENDIX > S AFETY AND P RODUCT I NFORMA TION Software License Agreement BY USING THE RINO 1 10, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT . PLEASE READ THIS AGREEMENT CAREFULL Y .
Rino ® 1 10 Owner ’s Manual 97 A PPENDIX > S AFETY AND P RODUCT I NFORMA TION W arnings and Cautions The GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment.
98 Rino ® 1 10 Owner ’s Manual A PPENDIX > S AFETY AND P RODUCT I NFORMA TION safety standards previously set by both U.S. and international standards bodies: American National Standards Institute (ANSI) IEEE.
Rino ® 1 10 Owner ’s Manual 99 A PPENDIX > S AFETY AND P RODUCT I NFORMA TION T urn your radio OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy .
100 Rino ® 1 10 Owner ’s Manual I NDEX Symbols 3D Accuracy 7 A Accessories 83 Accuracy 81 Acquisition time 81 Add to Route 41, 42, 44, 46 Alarm 59, 73 Arriving at Destination 48 Arrow 25 Attention .
Rino ® 1 10 Owner ’s Manual 101 I NDEX K Keylock 5, 35 L Lap 75 Last Found Place 47 License Agreement 96 Lock Buttons/Keys 5, 35 LORAN TD Format 65 M Main Display Pages 4 Main Menu 33 MapSource 1, .
102 Rino ® 1 10 Owner ’s Manual I NDEX Use 49 S Satellite Fix 7 Satellite Information 7 Satellite Page 59 GPS Off 61 Options 62 Sky V iew 60 Save as a W aypoint 44, 46 Scales 23 Scanlist 12, 13, 16.
.
F or the latest free software updates (excluding map data) throughout the life of your Garmin products , visit the Garmin web site at www .garmin.com. © Copyright 2002–2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.
Ein wichtiger Punkt beim Kauf des Geräts Garmin 110 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Garmin 110 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Garmin 110 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Garmin 110 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Garmin 110 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Garmin 110 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Garmin 110 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Garmin 110. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Garmin 110 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
