Benutzeranleitung / Produktwartung FGEF3041KF des Produzenten Frigidaire
Zur Seite of 32
All about the Use & Care of your T ABLE OF CONTENTS www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352 Electric R ange 316902239 Rev A (Jan 2013) Important Safety Instructions ........................... 3 -5 Before Setting Surface Controls .
2 Thank you for choosing Frigidaire . This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance.
3 Read all instructions before using this appliance. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
4 IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not store items of interest to children in the cabinets above a range or on the backguard of the range. Children climbing on the range to reach items could be seriously injured.
5 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP • Know which knob controls each surface heating unit . Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. • Use proper pan size —This appliance is equipped with one or more surface units of different sizes.
6 BEFORE SETTING SURFACE CONTROLS Using proper cookware The size and type of cookware used will influence the setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in Figure 2. Fig. 2 Fig.
7 NOTES About the ceramic glass cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Be sure to match the pan size with the diameter of the element outline on the cooktop and only flat-bottomed cookware should be used.
8 SETTING SURFACE CONTROLS Single radiant surface elements (all models) To operate the single radiant element: 1 . Place correctly sized cookware on single radiant surface element. 2 . Push in and turn the surface control knob in either direction (Fig.
9 SETTING SURFACE CONTROLS CAUTION Heating with inner (small) element only Heating with both elements Fig. 1 Fig. 2 Symbols on the backguard will help choose which portion of the dual radiant element to set. The symbol indicates a setting for the inner coil only.
10 SETTING SURFACE CONTROLS Keep warm (some models) The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm feature to keep cooked foods hot such as; vegetables, gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner plates.
11 SETTING SURFACE CONTROLS Home Canning Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for home canning procedures.
12 BEFORE SETTING OVEN CONTROLS The flat oven rack or flat handle oven rack (some models) may be used for most cooking needs. The offset oven rack (some models) is designed to place the base of the rack about 1/2 of a rack position lower than normal. This rack design provides several additional possible positions between the standard postions.
13 OVEN CONTROL FUNCTIONS READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various keypad functions as described below. 1 2 3 4 5 6 1. Oven light key — Use to turn the interior oven light ON or OFF.
14 SETTING OVEN CONTROLS Setting the clock When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance.
15 Setting the minute timer 1 . Press . 2 . Press the to increase the time in one minute increments. Press and hold the to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
16 SETTING OVEN CONTROLS The oven may be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). The factory preset automatic bake temperature is 350°F (177°C). To set bake 1 . Press . "— — —" appears in the display.
17 When the set bake time runs out 1. " End " will appear in the display window and the oven will shut-off automatically. 2 . The control will beep 3 times every 60 seconds as a reminder until is pressed. To change the oven temperature or bake time after baking has started 1 .
18 SETTING OVEN CONTROLS Benefits of speed bake convection cooking: • Cooks more evenly . • Multiple rack baking. • No special pans or bakeware needed. How speed bake works Speed bake uses a convection fan to circulate the oven's heat uniformly and continuously around the oven (See Fig.
19 To set Broil 1 . Arrange the oven rack while oven is still cool. 2. Press . " — — "will appear in display. 3 . Press and hold the or until the desired broil setting level appears in the display. Press the for HI broil or the for LO broil.
20 The interior oven light will automatically turn ON when the oven door is opened. Press to turn the interior oven light ON and OFF whenever the oven door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder.
21 A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth.
22 SELF-CLEANING 2. Press . The " : " in the time of day will flash. 3 . Press and hold the pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed. 4. Press . “---” appears in the display.
23 Surface type Recommendation • Porcelain enamel broiler pan and broiler pan insert (if equipped) • Easy Care™ Stainless Steel (some models) Cleaning recommendation table CARE & CLEANING • Control panel • Control key pad membrane • Decorative trim (some models) For general cleaning, use hot, soapy water and a cloth.
24 Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. To maintain the cooktop appearance DO NOT: • Slide anything metal or glass across the cooktop. • Use cookware with dirt or dirt build up on bottom; replace with clean cookware before using.
25 Aluminum foil and the cooktop - Use of aluminum foil on a hot cooktop can damage the ceramic glass. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the ceramic cooktop under ANY circumstances. Aluminum utensils and the cooktop - Care must be taken when aluminum pots or pans are used on the cooktop.
26 CARE & CLEANING The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove oven door: 1 .
27 Solutions to common problems • BEFORE YOU CALL Surface element does not heat cookware. • Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight quality cookware. Flat pans heat better than warped pans. Cookware materials and weight of the material affect heating.
28 Problem Solution BEFORE YOU CALL • Solutions to common problems Oven smokes excessively when broiling. • Incorrect setting or food preparation. Follow broiling instructions in Setting Oven Controls section. • Make sure oven door is open to broil stop position.
29 Brown streaks or specks on cooktop surface. • Spillovers are cooked onto ceramic surface. Use razor blade scraper to remove soil. See "Cooktop Cleaning" and "Cooktop Maintenance" in the Care & Cleaning section. Metal marks on the cooktop.
30 NOTES.
31 NOTES.
This page is left blank intentionally This page is left blank intentionally Canada 1.800.265.8352 Electrolux Canada Corp. 5855 T erry F ox W ay Mississauga, Ontario, Canada L5V 3E4 Y our appliance is covered by a one year limited w arrant y .
Ein wichtiger Punkt beim Kauf des Geräts Frigidaire FGEF3041KF (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Frigidaire FGEF3041KF noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Frigidaire FGEF3041KF - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Frigidaire FGEF3041KF reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Frigidaire FGEF3041KF erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Frigidaire FGEF3041KF besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Frigidaire FGEF3041KF verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Frigidaire FGEF3041KF. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Frigidaire FGEF3041KF gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
