Benutzeranleitung / Produktwartung IVA-C801 des Produzenten Alpine
Zur Seite of 68
EN FR ES R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CHM-S620 You cannot connect to IVA-C801/CVA-1006. Il est impossible de se raccorder au IVA-C801 / IV A-1006R. No es posible conectarlo a IVA- C801/CVA-1006. CHA-S624 CD changer for IV A-C801/ CV A-1006. Changeur CD pour IV A-C801/ CV A-1006. Cambiador de CD para IV A-C801/CV A-1006.
ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 3 CA UTION ................................................... 3 PRECA UTIONS ......................................... 4 Basic Operation Using Face Co ver .
Adjusting Listening Position .......................... 31 Adjustment of T ime Correction V alue ............ 32 Adjusting Cross-Over (X-Ov er) Point of 2-W ay Divider ................................ 32 Adjusting Le vels .............................
3 -EN W ARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INST ALL THE PRODUCT CORRECTL Y SO THA T THE DRIVER CANNOT WA TCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
4 -EN PRECAUTIONS T emperature Be sure the temperature inside the vehicle is between +45 ° C (+113 ° F) and 0 ° C (+32 ° F) before turning your unit on.
5 -EN Installation Location Make sure the IV A-C801/CV A-1006 will not be installed in a location subjected to: • Direct sun and heat • High humidity and water • Excessi ve dust • Excessi ve vibrations Correct Handling Do not drop the disc while handling.
6 -EN Remov e the anti-theft cov er when you driv e. This pre vents the cov er from falling of f the unit and interfering with the safe operation of the vehicle. Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen.
7 -EN Basic Operation 1 Press the PWR (P ower) b utton on the unit to tur n the power on to the unit. 2 Press the OPEN/CLOSE button to open the monitor . The unit beeps 3 times and raises the monitor . The opening screen appears on the monitor . 3 Press the SOURCE button.
8 -EN Basic Operation Using F ace Co ver An anti-theft face co ver is provided with the IV A-C801/CV A-1006. Put the f ace cov er onto the IV A-C801/CV A-1006 when you lea ve the v ehicle. Be sure to remov e the anti-theft f ace cov er when you drive .
9 -EN Lowering the Monitor 1 Press the OPEN/CLOSE button. The unit will beep 3 times and lower the monitor automatically . NO TES • The IV A-C801/CV A-1006 is a precision device . With gentle handling, its unique capabilities can be enjoyed for a long time.
10 -EN Basic Operation A udio Mute Function Activating this function will instantly lo wer the volume le vel b y 20 dB. 1 Press the MUTE button to activ ate the MUTE mode.
11 -EN Radio Operation A utomatic Seek T uning 1 Press the B AND button repeatedly to select the desired radio band, FM or AM. 2 Press the 2 (TUNE) b utton to select the desired mode, DX or Local.
12 -EN (IVA-C801) (CVA-1006) 1 FUNC BAND 1 FUNC LIST 33 B AND 55 LIST Radio Operation Man ual Storing of Station Presets 1 T une in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. Press the FUNC (P AGE 1/2) button.
13 -EN Selecting Preset Stations fr om List Displa yed The desired preset station can be selected from the preset station list displa yed. If stations have been titled (named), their titles will also be display ed. (F or Titling Radio stations/CDs, see page 38).
14 -EN Pla yback Only IV A-C801 has a built-in CD pla yer . When an optional Alpine CD pla yer or CD changer is connected, you can control it from the head unit. This section describes operation assuming that an Alpine CD pla yer/Changer is connected to the IV A-C801/ CV A-1006.
15 -EN Music Sensor (Skip) This feature allo ws you to go to the beginning of a trac k. 1 Lightly press the 1 ( g ) b utton dur ing the CD play to return to the beginning of the current trac k. If you wish to return to the beginning of a track fur ther back, repeatedly press the 1 ( g ) button until the desired tr ack is reached.
16 -EN Displa ying List of T rac k Titles/CD Titles If CD titles ha ve been memorized, you can select a CD from the CD title list. When CD te xt discs are inser ted into the CD play er (for IV A-C801 only), you can select a trac k from the display ed list of track titles.
17 -EN Contr olling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to the IV A-C801/CV A-1006 if it is Ai- NET compatible . With a CD Changer connected to the Ai-NET input of the IV A-C801/CV A-1006, the CD Changer will be controllable from the IV A- C801/CV A-1006.
18 -EN Music Sensor (Skip) 1 Momentarily press the 1 ( g ) button once to return to the beginning of the current track. If you wish to access the beginning of a trac k fur ther back, repeatedly press until y ou reach the desired trac k. 2 Press the 3 ( f ) b utton once to adv ance to the beginning of the ne xt trac k.
19 -EN F ast Forwar d and Backwar d 1 Press and hold the 1 ( g ) or 3 ( f ) b utton to quickly mo v e backward or f orward until you reach the desired section of the trac k. When y ou reach the desired section, release the button. The play er star ts playing from that section.
20 -EN Cassette Player Operation (Optional) F ast Forwar d/Rewind/Re ver sing T ape Direction/Pause 1 Press and hold the 3 ( f ) or 1 ( g ) b utton f or at least 2 seconds to f ast forw ard or fast rewind the tape respectiv ely .
21 -EN Pr ogram Sensor 1 Lightly press the 1 ( g ) b utton once during tape pla y to return to the beginning of the program being currently pla yed. If you wish to return to a program fur ther back, press repeatedly until the number of prog rams you would lik e to skip is obtained.
22 -EN DVD/V ideo CD/CD Player/DVD changer Operation (Optional) Pla ying D VD/Video CD/CD If an optional Alpine D VD/video CD/CD play er is connected to the IV A-C801/CV A-1006, you can control it from the IV A-C801/CV A-1006. W ARNING It is dangerous (and illegal in many states) f or the driver to watch the TV/Video while dr iving the vehicle .
23 -EN Chapter (D VD)/T rac k (Video CD) Sensor 1 Lightly press the 1 ( g ) or 3 ( f ) button during D VD/video CD/CD play to return to the beginning of the chapter/trac k being currently play ed or advance to the beginning of the ne xt chapter/trac k respectively .
24 -EN DVD/V ideo CD/CD Player/DVD changer Operation (Optional) Contr olling D VD Changer If an optional Alpine D VD changer is connected to the IV A-C801/CV A-1006, the D VD changer can be controlled from the IV A-C801/CV A-1006. ∗ Y ou can directly select the D VD changer mode by pressing the CHG (IV A-C801) or CHANGER (CV A- 1006) button.
25 -EN Navigation System Operation (Optional) Contr olling Navigation System If an optional Alpine Na vigation System is connected to the IV A-C801/CV A-1006, some of its functions can be controlled from the IV A-C801/ CV A-1006. The functions and displa y indicators av ailable will vary depending upon the Navigation System connected.
26 -EN Auxiliary Device Operation (Optional) Operating A uxiliar y De vices T o operate your de vices connected to the A UX terminals on the rear panel of IV A-C801/CV A-1006, follo w the procedure descr ibed below . W ARNING It is dangerous (and illegal in many states) f or the driver to watch the TV/Video while dr iving the vehicle .
27 -EN Audio Pr ocessor Operation (Optional) Selecting F actory (Maker's) Equalization Presets If an optional Alpine Equalizer is connected to the IV A-C801/CV A-1006, the Equalizer can be controlled from the IV A-C801/CV A-1006. Six equalization cur v es are preset on the Equalizer at the f actor y .
28 -EN Audio Pr ocessor Operation (Optional) Creating P ersonal Equalizer Characteristic Curves Y ou can create your own equaliz er characteristic curves. The f ollowing is the procedure. NO TE The P arking Brake must be engaged to access the Equalizer Adjustment mode scr een.
29 -EN Adjusting Surr ound Levels and Surround Dela y Time If your equaliz er connected is equipped with the surround le vel/time adjustment f eature, y ou can adjust the surround sound le vels and surround delay time to suit to y our preference .
30 -EN Audio Pr ocessor Operation (Optional) Setting DHE P ower or Fine Mode The DHE P ower and Fine modes enhance the DHE eff ects. P ower mak es coarse adjustments to the ov erall balance whereas Fine will make more subtle changes. Listen to how each mode affects the music and select the one most pleasing to your taste .
31 -EN Customizing BBE Mode This function is operativ e only when an audio processor equipped with the BBE lev el (Low and High) adjustment feature is connected. 1 Activate the BBE mode (see the pre vious page), then press the Function button 2 (MODE1) through 4 (MODE3) that has the BBE mode you wish to adjust.
32 -EN Audio Pr ocessor Operation (Optional) Adjustment of Time Correction V alue 1 Press the SOURCE b utton. The main menu appears on the displa y . 2 Press the 4 (A.PR OC) button. The A udio Processor List appears. 3 Rotate the rotary encoder and select the "Time- Corr .
33 -EN → → → → → → Adjusting Levels 1 Press and hold the FUNC (RETURN) button f or at least 2 seconds in the Divider mode. The mode changes to the Divider Adjustment mode. 2 Press the 2 (LEVEL) b utton. The mode changes to the Le vel Adjustment mode .
34 -EN → → → → Audio Pr ocessor Operation (Optional) Adjusting Time-Correction for 2- W ay Speaker System Use this procedure to adjust the sound time difference betw een the speakers. 1 Press and hold the FUNC (RETURN) b utton for at least 2 seconds in the Divider mode.
35 -EN Memorizing Divider Settings Y ou can store your settings of the divider(s) in memor y when you ha ve adjusted them. 1 After adjusting the divider(s), displa y the Divider mode screen. Press and hold any one of the Function b uttons 1 (P .SET1) through 4 (P .
36 -EN Audio Pr ocessor Operation (Optional) Recalling Memorized Characteristic Curves Using Function Buttons 1 Activate the desired mode , DHE, BBE, surround, time correction or equalizer , then press the Function b utton 1 (P .SET1) through 6 (P .SET6) that has y our desired characteristic cur ve .
37 -EN Displa ying Spectrum Analyzer Depending on the e xter nal audio processor connected to the unit, this function ma y not work properly . 1 While the main screen f or a music source is display ed, press the SPE.ANA. button to turn on the spectrum analyzer mode.
38 -EN Other Useful Features T urning Defeat Mode On and Off When the def eat mode is on, the sound signals bypass the BBE and surround circuits and directly go to the line output. The equalizer cur ve , theref ore, becomes flat. 1 Press the SOURCE button.
39 -EN 1 Activate the r adio mode. T une in a radio station you wish to title . 2 Press and hold the INPUT button f or at least 2 seconds. The Title Inputting screen appears in the display . 3 Characters are displa yed at the bottom menu. Rotate the rotary encoder and select the desired character f or the first position.
40 -EN Adjusting Subw oofer Level (when subw oofer is used with other speaker s) T o display the initialization mode screen: T o watch a video source, your v ehicle must be parked with the ignition k ey in the A CC or ON position. T o do this, follo w the procedure below .
41 -EN Switching Phase Use the phase-s witching function after connecting your audio-processor , amplifier and subwoof er to the IV A-C801/CV A-1006. NO TE After carrying out the steps 1 to 3 of "T o display the Setup mode scr een" described on page 40, perform the operation show below .
42 -EN Other Useful Features Setting Interrupt Icon Displa y (IN-INT) The unit can displa y the icon of the external device such as a telephone whene ver a phone call comes in to tell you there is a phone call.
43 -EN Setting Visual Mode For direct access to the diff erent visual screens, preset the Navigation or the V . SEL mode. Y ou can then displa y the screen of the preset item by just pressing the V .
44 -EN Selecting Rear Monitor If a rear-seat monitor and a navigation system are connected to the IV A-C801/CV A-1006, you can s witch the picture/sound of the rear-seat monitor from the IV A-C801/CV A-1006.
45 -EN Displa ying Time NO TE After carrying out the steps 1 to 3 of "T o display the Setup mode scr een" described on page 40, perform the operation show below .
46 -EN Other Useful Features Sound (Beep) Guide Function This function will give audib le feedbac k with varying tones depending upon the button pressed. NO TE After carrying out the steps 1 to 3 of "T o display the Setup mode scr een" described on page 40, perform the operation show below .
47 -EN Setting A utomatic Opening/ Closing of Monitor When the Automatic Opening/Closing mode is "ON," the monitor automatically opens when the ignition ke y is turned to the "ACC" or "ON" position. The monitor automatically closes when the ignition ke y is tur ned OFF .
48 -EN Other Useful Features Adjusting Tint of Picture Tint adjustment can be made only in the navigation, D VD , A UX1 and A UX2 modes. Tint adjustment cannot be made if a Navigation system with the RGB f eature is connected.
49 -EN Illumination Contr ol Setting the illumination control to A UTO , decreases the illumination brightness of the IV A- C801/CV A-1006, whene v er the parking lamps of the v ehicle are ON. Use this function if you f eel the unit's illumination is too bright at night.
50 -EN MODE1 MODE2 Other Useful Features Setting A utomatic Backgr ound T exture/Color Scr oll T ur n on the Automatic Bac kground T exture/color Scroll to automatically change backg round te xture/colors. The background te xture/color will change each time the ignition ke y is tur ned off and turned back on again (12 te xtures/colors).
51 -EN MODE3 MODE4 →→ → ←← →→ → ← Picture NA V NA V NA V V oice NA V RADIO T APE NA V NA V NA V A UX2 A UX1 ∗ CHG Picture RADIO NA V A UX1 ∗ V oice RADIO RADIO RADIO A UX2 RADIO In the Mode 3 (Cinema), the monitor displa ys a nor mal picture b y stretching out the picture horizontally and vertically .
52 -EN Remote Contr ol Operation 7 8 Button Radio mode: Pressing the button will select, in ascending order , stations programed into the radio's presets as sho wn below . → 1 → 2 ... 6 CD Changer mode: DISC Select (UP) Button Press the button to select a disc in ascending order .
53 -EN Battery Replacement Applicable battery: Use two "AAA" siz ed dr y batteries or equivalent. • Point the remote control transmitter toward the remote sensor on the IVA-C801/CVA-1006 and use the remote control within 2 meters from the IVA-C801/CVA-1006.
54 -EN Information Unclear picture displa y . • Fluorescent tube is exhausted. - Replace the fluorescent tube*. * The fluorescent tube replacement is not free of charge e ven within the warranty period, for the tube is an article of consumption. Radio Unable to receive stations.
55 -EN CD (IV A-C801 only) CD pla yback sound is wa vering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to e vaporate (about 1 hour). CD insertion not possible. • A CD is already in the CD player . - Eject the CD and remove it.
56 -EN Information Indications f or CD Changer (Optional) • T emperature in the vehicle is too high. - Allow the vehicle's interior temperature to cool. The indicator will disappear when the temperature returns to within operation range. • No CD magazine is loaded into the CD Changer .
57 -EN MONIT OR SECTION Screen Size 6.5" LCD T ype T ransparent type TN LCD Operation System TFT activ e matrix Number of Picture Elements 336,960 pcs. (1,440 × 234) Effecti ve Number of Picture Elements 99.99% or more Illumination System U-shaped cold cathode fluorescent tube FM TUNER SECTION T uning Range 87.
58 -EN Before installing or connecting the unit, please read the f ollowing and pages 3 to 6 of this manual thor oughly f or proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to mak e the proper connections may result in fire or product damage.
59 -EN Installation Installing the Monitor • Place of installation Before determining the position of installation, check that the displa y will not hamper gear shifting when it is opened and closed in that position. NO TE Install at an angle of within 30 de gr ees fr om the horizontal.
60 -EN Installation and Connections Installing the T uner When mounting with V elcro fasteners When mounting the tuner with the V elcro fasteners , be sure to choose a flat location. Do not hang the unit from the bottom of the dashboard or rear deck with the V elcro fasteners .
61 -EN P arking Brake Lead Connection If necessar y , use a pinch connector to connect the foot brak e lead, par king brake lead, etc. Connection Diagram of SPST Switc h (Sold Separately) (If the ACC po wer supply is not av ailable) NO TE If your vehicle has no A CC power supply , add an SPST (Single-P ole, Single-Thr ow) switch (sold separately).
62 -EN Installation and Connections Connections (IV A-C801/CV A-1006 Wiring Diagram) <Monitor> <Tuner> (Orange) (Yellow) (Black) T o the instr ument cluster illumination lead Battery (Whit.
63 -EN 1 Illumination Lead (Orange) This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlight- ing of the IVA-C801/CVA-1006 to dim whenever the vehicle ‘ s lights are turned on. 2 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery.
64 -EN Installation and Connections (White/Brown) (White/Brown) Navigation system (Sold Separately) D VD Video Player (Sold Separately) Equalizer equipped with Ai-NET (Sold Separately) CD Changer (Ai-.
65 -EN 1 Remote Output Terminal 2 System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position. NO TE Be sure to turn the power of f to the unit before changing the switch position.
66 -EN.
Ein wichtiger Punkt beim Kauf des Geräts Alpine IVA-C801 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alpine IVA-C801 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alpine IVA-C801 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alpine IVA-C801 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alpine IVA-C801 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alpine IVA-C801 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alpine IVA-C801 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alpine IVA-C801. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alpine IVA-C801 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
