Benutzeranleitung / Produktwartung L0542 des Produzenten Fisher-Price
Zur Seite of 16
www .fi sher -price.co.uk L0542 IMPOR T ANT! KEEP INS TR UCTIONS FOR FUTURE REFERENCE..
2 Prevent serious injur y or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair . • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position.
3 Assembled Parts 2 Bases Footrest 2 Frames Hinge Rod 2 Seat Bottom T ubes Pad Seat Bottom Seat Back Base T ray Food T ray T eether T oy Note: Tighten or loosen all scre ws with a Phillips screw- driver .
4 1 • Place the seat bottom face down on a flat surface. • At an angle, f it the footrest on the seat bottom, as shown. Assembly Seat Bottom Footrest • Slide a seat bottom tube through each set of plastic rings on the seat bottom.
5 Assembly 4 • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. T ighten the screws. This ma y require extra force. Insert Screws Her e 5 Seat Back Pin Slot • T urn the seat bottom assembly upright. • Fit the seat back pins into the slots in the top side of the seat bottom assembly .
6 7 Assembly • Pull the frame leg out on each frame to open. Mak e sure it "clicks" into place. • P osition a frame so that the decorated side is outward. • Fit the end of a base into the back leg of a frame. • Fit a screw retainer ov er the hole in the back leg, as sho wn.
7 Assembly 10 Base • Insert the fr ame front legs onto the remaining base. • Fit a screw retainer ov er a hole in the front leg. • Insert a #10 x 2,2 cm black screw through the screw retainer and front leg.
8 Assembly 12 • Push each seat height adjuster to be sure they are completely on the seat bottom tubes. • Inser t a #8 x 1,9 cm screw through each seat height adjuster and the ends of the seat bottom tube. T ighten the screws. This ma y require extra force.
9 Assembly 16 Clips • Fit the clips on the front edge of the pad onto the seat bottom. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. Shoulder Straps Up Crotch Strap Down Lowest Slot Hint: Do not unbuckle th e restraint system.
10 Assembly Smaller Baby • Insert the ends of the shoulder str aps through the low er slots in the pad. • From behind the product, attach the ends of the shoulder str aps to the peg. 18 Shoulder Straps Larger Baby • From the front of the product, inser t the ends of the shoulder straps through the upper slots in the pad and seat back.
11 Prevent serious injur y or death from falls or sliding out: The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair . W ARNING Secur e Child 1 • Place your child in the seat.
12 4 T o change strap slots: • From behind the product, squeeze the restr aint release tabs and remov e the shoulder straps. • From the front of the high chair , pull the shoulder portions of the restraint system out and then fit them back through the desired shoulder strap slots in the seat pad and in the seat back.
13 Using the T rays 6 Base T ray Armrest • Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place. Hint: Before use, thor ougly wash all parts (the tra ys) that ma y contact food. Th e base tray is not dishwash er safe.
14 T eether T oy Ta b Slot Ta b • Insert and “snap” the teether toy tab into either slot in the tray . Hint: T o remove the teether toy , press the tab and lift the to y . 10 Using the T eether T oy • Fit the food tra y into the base tray , as sho wn.
15 Adjusting the Seat T o adjust the seat angle: • Squeeze the seat back handle and push the seat back forward or , pull it backw ards to the desired position. • Push the seat back to be sure it is latched in position. Semi-Recline Upright Recline Hint: Adjust th e seat angle to an y of three positions: Upr ight, Semi-Recline or Recline.
• With the legs all the w ay open, lower the seat to position 7 the low est position). • Pull the frame release latches forward and push the rear legs toward the front legs. Pull Frame Release Latch Storage 13 • The pad, fr ame and base tray may be wiped clean using a mild cleaning solution and a damp cloth.
Ein wichtiger Punkt beim Kauf des Geräts Fisher-Price L0542 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fisher-Price L0542 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fisher-Price L0542 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fisher-Price L0542 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fisher-Price L0542 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fisher-Price L0542 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fisher-Price L0542 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fisher-Price L0542. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fisher-Price L0542 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.