Benutzeranleitung / Produktwartung 9202 des Produzenten Allworx
Zur Seite of 29
Allworx Phone Guide 9202.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise without the prior written permission of Allworx. © 2008 Allworx, a wholly owned subsidiary of PAETEC.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page i Table of Contents 1 GETTING STARTED ..................
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page ii 6.17 B USY L AMP F IELD (BLF) .......................
Phone Guide - 9202 Congratulations! You’re the proud new owner of an Allworx ® 9202 VoIP phone. This phone will make it easy for you to place and receive calls when using the Allworx System. 1 Getting Started 1.1 What is in the box? Check out the contents of the box your phone came in.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 2 6. After applying power, the phone will initialize itself.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved.
Phone Guide - 9202 3 Introduction to your Allworx Phone Your new Allworx phone supports two modes of operation: PBX (Private Branch Exchange) Mode and Key System Mode. Your System Adminis trator has pre- configured the phone for one of these two modes.
Phone Guide - 9202 4 Button Operation Button Light Purpose KEYPAD None Use the keypad to dial numbers in order to place a call. MESSAGES Solid red if new messages are present. Access the Message Center. TRANSFER Solid red until the call is transferred.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 6 4.1 Messages If the MESSAGES button is red, you have a new message in your voicemail box.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 7 a. Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you wish to put on hold and then press the HOLD button.
Phone Guide - 9202 1. With the handset on hook, press the MUTE/DND button. 2. The light on the MUTE/DND button will appear amber. 3. With Do Not Disturb enabled, your phone will not ring. All calls will follow the next step in your acti ve call route.
Phone Guide - 9202 5 Phone Operation 5.1 Placing a Call • Outbound calls can be placed by pressing the following PFKs: o Call Appearance : can be used to place extension-to-ext ension calls or to obtain an outside line (must dial 9 first). o Line Appearance : seizes the outside line without dialing 9 first.
Phone Guide - 9202 5.5 Redial a Number • You can automatically dial the last number called by selecting the REDIAL soft key on the phone’s display screen. • Select the CALLS soft key. Use the Up / Down navigation arrows to highlight the desired number.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 11 5.8 Programmable Function Keys The following features can be programmed by your System Administrator into the 2 PFKs on the Allworx 9202.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 12 6 System Features 6.1 Operator Dialing (or transferring to) 0 from any phone will initiate a call to the company operator.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 13 6.9 Call Queues Logging in/out of a Queue To log into a Queue: 1.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 14 6.10 Call Forwarding Dialing 45 + an extension will forward any call that come into the phone to that extension.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved. Revised: May 28, 2008 Page 16 When the Parking Orbit PFK light is flashing, you will be able to pick up a call in the Parking Orbit using your handset and pressing the PFK.
Phone Guide - 9202 7 Advanced Topic s 7.1 Phone Configuration Menu The following can be viewed / changed by selecting the CONFIG soft key: • Personal Speed Dial • Preferences • Reboot Phone • Clear Call History • Refresh Directory • Network Settings • Current Status / Info • Statistics • Save Settings • Set Factory Defaults 7.
Phone Guide - 9202 2. Press the Down Arrow button to select Preferences . Press the Select button . 3. Select from the following list using the Up / Down navigation arrows to make the changes: a. LCD Contrast – Controls the contrast of the display. Use the Volume bar or Up / Down Arrow buttons to adjust.
Phone Guide - 9202 ii. Always (Default) iii. On Hook k. Off Hook Answer Mode – Answers incoming calls when the phone is taken “off-hook” i. Off Hook Will Answer (Default) ii. Select to Answer l. Off Hook Ringing – The phone will ring when a new call is received while in use.
Phone Guide - 9202 2. Highlight Reboot Phone . 3. Press the Select button . 4. If you have any unsaved changes, you ’ll be asked if you want to save them before rebooting. Select the YES soft key to save any changes OR select NO to cancel changes made.
Phone Guide - 9202 iii. Disabled (Default) c. Remote Plug ‘n’ Play – Key used to set up a remote phone. See the System Administrator. d. Edit Time Server IP – Option to change the Time Server the phone is logged into. e. Edit Boot Server IP – The WAN IP address the server is using for the setup of a remote phone.
Phone Guide - 9202 • LAN Connection Info • PC Connection Info 5. Use the Up / Down navigation arrows to move through the list. 6. When finished, press the EXIT soft key. 7.9 Check Statistics 1. Select the CONFIG soft key. 2. Highlight Statistics .
Phone Guide - 9202 7.11 Reset the Phone to Its Factory Defaults Warning: Do not reset your phone to its factory defaults unless instructed by your System Administrator. 1. Select the soft key that corresponds to CONFIG on the screen. 2. Highlight Set Factory Defaults .
Phone Guide - 9202 8 Additional Infor mation Your business directory, including the conferenc e schedulin g page, company phone list, distribution lists, phone features chart, and shared folders are a.
Phone Guide - 9202 300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALL WORX • 585-421-3850 • www.allworx.com © 2008 Allworx. All rights reserved.
Ein wichtiger Punkt beim Kauf des Geräts Allworx 9202 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Allworx 9202 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Allworx 9202 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Allworx 9202 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Allworx 9202 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Allworx 9202 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Allworx 9202 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Allworx 9202. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Allworx 9202 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
