Benutzeranleitung / Produktwartung FAI34OC des Produzenten First Alert
Zur Seite of 70
FAI34OC/FA134OC-UL Security *stem N5943-5 6195 Previous Menu.
-2-.
TABLE OF CONTENTS SYSTEM OVERVlEW ............................................................... 4 ENTRY/EXIT DELAYS ............................................................. 8 ABOUT THE KEYPADS ...................................................
General Congratulations on your ownership of a First Alert Professional Partitioned Security System. You’ve made a wise decision in choosing it, for it represents the latest in security protection technology today. This system offers you three forms of protection: burglary, fire and emergency.
SYSTEM OVERVIE W Burglary Protection Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and allows you to BYPASS selected zones while leaving the rest of the system armed. You must turn on or “arm” the burglary protection portion of your system before it will sense burglary alarms.
SYSTEM OVERVIE W Fire Protection The fire protection portion of your security system (if used) is always on and will sound an alarm if a fire condition is detected. Refer to the FlRE ALARM SYSTEM section for important information concerning fire protection, smoke detectors and planning emergency exit routes from the premises.
Device Timers The system provides up to 20 “timers” which can be used to control various devices, such as lights or appliances. These timers are similar in concept to the individual appliance timers that might be purchased at a department store. The devices that can be controlled (up to 16) are programmed into the system by the installer.
ENTRY/EXIT DELAYS General Information Your system has preset time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated e.
General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location. ABOUTTHEKEYPADS Your keypads allow you to control all system functions.
ABOUT THE KEYPADS Fixed-Word Keypad Displays AWAY: STAY: INSTANT: BYPASS: All burglary zones, interior & perimeter, are armed. Perimeter burglary zones, such as windows & doors, are armed. Perimeter burglary zones armed and entry delay is turned off.
ABOUT THE KEYPADS FA21 OKP Fixed-Word Keypad FA250KP Fixed-Word Keypad (shown with cover removed) FASSOKP Alpha Keypad (shown with cover removed) - 11 -.
1. 2. 3. 4. 5. FUNCTIONS OF THE KEYPADS ALPHA DISPLAY WINDOW: A 2-line, 32-character Liquid Crystal Display (LCD). Displays protection point identification and system status, messages, and user instructions.
13. 14. 15. 16. 17. 18. KEYS O-9: Used to enter your individual security access code(s). POWER/READY INDICATOR: (GREEN) On some keypads, thii lights when primary power is on. If off, system is operating on its backup battery power. YOUR INSTAUER IMMEDIATELY.
Uslng the q Before arming your system, all protected doors, windows and other protection zones READY Key must be closed or bypassed (see BYPASSING section). Otherwise the keypad will display a “Not Ready’ message. Using the READY key will display all zones that are faulted, making it easier for you to secure any open zones.
DISPLAYING ALL ZONE DESCRIPTORS Using the q The Alpha Keypads can also display all the zone descriptors that are programmed in READY Key your system. The abbreviated instructions for the READY key will appear first, followed by the zone descriptors.
(With Entry Delay ON) Using the 131 Use this key when you are staying home, but might expect someone to use the STAY key entrance door later. When armed in STAY mode, the system sounds an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises.
ARMING PERIMETER ONLY (With Entry Delay OFF) Using the cl Use this key when you are staying home and do not expect anyone to use the 7 INSTANT entrance dwr* Key When armed in INSTANT mode, the system will sound an alarm if a protected door or window is opened, but you may othennrise move freely throughout the premises.
ARMING ALL PROTECTION (With Entry Delay ON) Using the Use this key when no one will be staying on the premises. cl 2 AWAY Key When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises.
ARMING ALL PROTECTION (With Entry Delay OFF) Using the q Use this key when the premises will be vacant for extended periods of time such as 4 MAXIMUM vacations, etc.
Using the The OFF key is used to disarm the system and to silence alarm and trouble sounds. I 1 OFF Key See ‘SUMMARY OF AUDIBLE NOTIFICATION” section for information which will help you to distinguish between FIRE and BURGLARY alarm sounds.
BYPASSING PROTECTION ZONES Using the 1 This key is used when you want to arm your system with one or more zones BYPASS Key intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed.
BYPASSING PROTECTION ZONES Quick Bypass Your system allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually. Note: All bypasses are removed when an OFF sequence (security code plus OFF) is p3fO~ed. 1. 2. 3.
Using the q Your system can be set to alert you to the opening of a door or window while it is Key disarmed by using CHIME mode. When activated, three tones will sound at the Keypad whenever a protected perimeter door or window is opened, and the Not Ready message will be displayed.
VIEWING CENTRAL STATION MESSAGES General Information Users of the system may periodically receive messages on their display screens from their monitoring agency or installer. When a message is waiting to be viewed, the message shown below will appear.
(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS) Using Panic Keys Your system may have been programmed to use special key combinations to manually activate panic functions. The functions that might be programmed are Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
USING THE KEYS WITCH General Your system may be equipped with a keyswitch for use when arming and disarming. A red and green light on the keyswitch plate indicate the status of your system as follows: Green Light: Lights when the system is disarmed and ready to be armed (no open zones).
Using the cl 5 TEST Key TESTING THE SYSTEM (TO BE CONDUCTED WEEKLY) The TEST key puts your system into Test mode, which allows each protection point to be checked for proper operation. Disarm the system and close all protected windows, doors, etc. READY should be displayed.
TESTING THE SYSTEM Testing Your 1. Open and close each protected door and window in turn and listen for three beeps. System The identification of each faulted protection point should appear on the display. 2. Walk in front of any interior motion detectors (if used) and listen for three beeps as movement is detected.
SPECIAL SYSTEM FUNCTIONS The ‘D’ key can be used to activate a string of up 16 keystrokes. These ke strokes are ;,Wdneas a macro and are stored in the system’s memory. Typical Speed x ey functions . . l Seldom used but repeatable sequences. l Arming sequences that involve first bypassing certain zones before arming.
SPECIAL SYSTEM FUNCTIONS Executing Macros Press and hold down (about 2 seconds) the “D” key until the following prompt appears: I[ Enter your user code. The defined speed key sequence will begin automatically. NOTE: When defining speed key sequences, do not use the [#] key to represent Quick Arming.
SPECIAL SYSTEM FUNCTIONS (GOT0 Command and Global Arming) Accessing Another Each keypad is assigned a default partition for display purposes, and will show only Partition that partition’s information. But, if the user is authorized, a keypad in one partition can be used to perform system functions in other partitions by using the GOT0 command.
SPECIAL SYSTEM FUNCTIONS (USING #70 RELAY MENU MODE) 1170 Relay Menu Your system may be set up so that certain lights or other devices can be turned on or off by Mode using the #70 command from either a keypad or a telephone keypad (if voice module is used).
SECURITY CODES & AUTHORITY LEVELS General Information Duress Code Quick Arming At the time of installation, you were assigned an authority level and a personal fourdigit security code, known only to you and yours. The security code must be entered when arming and disarming the system.
SECURITY CODES & AUTHORITY LEVELS Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below.
SECURITY CODES & AUTHORITY LEVELS General Rules on Authority Levels and Changes To Exit User Edit Mode A user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned. A user may only ADD users to a LOWER authority level.
SECURITY CODES & AUTHORITY LEVELS To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones). CODE 1. Enter Master or Manager code and press the q key. 2. Enter the new user’s 2-digit User Number (01-99).
SECURlTi CODES To Add a User (continued) -1 pgfq & AUTHORITY LEVELS Press 1 (YES) if this user will be allowed to am more than one partition. Press 0 if this user will arm only his assigned partition. The keypad now prompts for the user’s access to the next partition (see GOT0 command).
SECURITY CODES & AUTHORITY LEVELS CODE To Change a 1. User’s Code Enter Master or Manager code and press the q key + user number to be changed. 2. Enter the new code for that user. pq The system will recognize that the user number is already in use and will ask whether or not this is a new user.
Delaying the Closing Your system’s programmed schedules may automatically arm the system at a Time predetermined time. In the event a user must stay on the premises later than usual, users with master or manager authority levels can manually delay the automatic arming (dosing) time up to 2 hours.
Temporary Temporary schedules allow you to override the normal schedules programmed by Open/Close the installer. Temporary schedules can be in effect for up to one week, and take Schedules effect as soon as they are programmed. Schedules are comprised of an arming (closing) time window and a disarming (opening) time window.
USING SCHEDULES Programming Temporary schedules only affect the partition from which it is entered. Temporary Temporary Schedules schedules can be reused at later dates simply by scrolling (by pressing #) to the DAYS? prompt (described below) and activating the appropriate days.
USING SCHEDULES After the windows for that day have been completed, the system will prompt for disarm and arm time windows for the next day. Repeat the procedure for all days of the week. When all of the days have been completed, the system will ask which days are to be activated.
General Information Device timers consist of an ON time & an OFF time, and selected days of the week in which they are active. There are up to 20 timers that can be used to control various devices, such as lights or appliances. Your installer will have programmed the appropriate devices into the system (up to 16 devices can be programmed).
PROGRAMMING DEVICE TIMERS I 00 Permanent ? O=NO,l =YESO I Enter the time you want the device turned on using 0O:Ol - 1159 format. When the display shows the desired time, press the * key to move to the AM/PM field. Press any key O-9 to change the AM/PM indication.
Typical “Check” Displays l Note that zone numbers 88-91 represent problems with wireless receivers, which are not user serviceable. CALL FOR SERVICE IMMEDIATELY.
Power Failure Non-Alpha Keypad Displays TROUBLE CONDITIONS 6. A display of “MODEM COMM” indicates that the control is on-line with the central station’s remote computer. The control will not operate while on-line. If the POWER indicator is off, operating power is not present and the system is inoperative.
FIRE ALARM SYSTEM (IF INSTALLED) - m I General Your fire alarm system (if installed) is on 24 hours a day, providing continuous protection. In the event of an emergency, the installed smoke and heat detectors will automatically send signals to your Control/Communicator, triggering a loud, interrupted sound from the Keypad.
NATIONAL FIRE PROTECTION ASSN. RECOMMENDATIONS ON SMOKE DETECTORS With regard to the number and placement of smoke/heat detectors, we subscribe to the recommendations contained in the National Fire Protection Association’s Standard #74 noted below.
Steps to Safety clcl liiiJl cl Cl Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association: 1. 2. 3. 4. 5. 6. 7. a. Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants.
MAINTAINING YOUR SYSTEM Taking Care of Your System Replacing Batteries in Wireless Sensors Wireless sensors may not have been used in your secwit~ system The components of your security system are designed to be as free of maintenance as possible.
MAINTAINING YOUR SYSTEM Silencing Low The keypad’s warning tones can be silenced by performing an OFF sequence (code Battery Warning plus OFF key), but the Keypad’s low battery message display will remain on as a Tones at the reminder that you have a low battery condition in one or more of your sensors.
QUICK GUIDE TO SYSTEM FUNCTIONS Function Check Zones Display All Descriptors Arm System Disarm System Bypass zones Quick Bypass Procedure Press [*] Press and hold [$] for 5 seconds Enter code Press ar.
QUICK GUIDE TO SYSTEM FUNCTlONS Function GOT0 Partition Add a User Change a users Delete a User Using Speed Key D Relay Menu Mode Self-Help Procedure Comments Enter security code. Press [*I Allows a user at one keypad to perform functions in another Enter partition number (l-8) partition, if that user is authorized to do so.
SUMMARY OF AUDIBLE NOTIFICATIONS (ALPHA DISPLAY KEYPADS) ,---- _--- --_- ___ ----- --~ - Sound Cause Display LOUD, INTERRUPTED FIRE ALARM FIRE is displayed; descriptor of zone in alarm is displayed.
GLOSSARY The following terms are used throughout the manual. ARM/DISARM: “Armed” simply means that the burglary portion of your system is turned ON and is in a state of readiness. “Disarmed” means that the burglary system is turned OFF, and must be rearmed to become operational.
UL NOTICE: This is a “GRADE A” svstem. FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use.
FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 NOTICE This equipment complies with Part 63 of the FCC rules. On the front cover of this equipment is a label that contains, among other information, the FCC registration number and ringer equ&lence number.
CANADIAN DEPARTMENT OF COMMUNICATIONS (DOG) STATEMENT NOTICE The Canadian Department of Communicakons label identifies 03rtifiedequiprnemThiscertfkcationmeansthattheequipnlent meets certain telecommunications network protective, opeMonal and safety requiremenfs.
WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of ‘easons.
WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM (continued) l Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors.
OWNER’S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeownet’s insurance taker for possible premium credit.
OWNER’S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS 7 Furnace Room cl Kitchen cl Bedrooms cl Attic 23 Basement 0 Living Room 0 Dining Room cl Hall F.
- INDEX - #84 Command.. .................................................. 37 2-Digit Phone Access Code.. ............................... .32 -A- Abbreviated Users Instructions.. ........................... 7 pc.. .....................................
Duress.. .......................................................... .34 Duress code.. .................................................. .33 -E- Emergency ........................................................ 4 Emergency Evacuation ................
Operator A.. ...................................................... 34 Operator B.. ..................................................... .34 OperatorC ....................................................... .34 -P- Panic Functions ...................
- NOTES - - 66 -.
General Information The system has the ability to record various events in a history log wherein each event is recorded in one of five categories (listed below), with the time and date of its occurrence. The Event Log holds up to 224 events, with the oldest event being replaced by the logging of any new event after the log is full.
4. 5. EVENT LOGGING PROCEDURES (continued) Use the [3] & [l] keys (for next and previous categories respectively) to display the categories of events. Press [8] to select a category and display the first event. Press [8] again for each subsequent event.
ONE YEAR LIMITED WARRANTY %tway Corporation, and its divisions, subsidiaries and affiliates (‘Seller”), 165 Eileen Way, Syosset, New York 11791, WarmIts its %st Alert security equipment (the “product”) to be free from defects in materials and workmanship for one year from date of original )urchase, under normal use and service.
172 Michael Drive Syosset, New York 11791 Copyighto 1995 PIllWAY CORPORATION.
Ein wichtiger Punkt beim Kauf des Geräts First Alert FAI34OC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie First Alert FAI34OC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für First Alert FAI34OC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von First Alert FAI34OC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über First Alert FAI34OC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon First Alert FAI34OC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von First Alert FAI34OC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit First Alert FAI34OC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei First Alert FAI34OC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
