Benutzeranleitung / Produktwartung 500c (2014) des Produzenten Fiat
Zur Seite of 426
Chrysler Group LLC OWNER’S MANUAL 2014 2014 FIA T 500 14FF500-126-AA First Edition Printed in U.S.A. FIA T 500.
VEHICLES SOLD IN CANAD A With respect to any V ehicles Sold in Cana da, the name Chrysler Group LL C shall be deemed t o be deleted and the name Chr ysler Canada Inc . used in substitution t heref or e . DRIVING AND AL COHOL Drunk en driving is one of the most fr equent causes of a ccidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 HOW TO USE THIS MANUAL .............. 5 䡵 W ARNINGS AND CAUTIONS ..............
INTRODUCTION Congratulations on selecting your new vehicle. Be as- sured that it repr esents precision workmanship, distinc- tive styling, and high quality - all essentials that are traditional to our vehicles.
HOW TO USE THIS MANUAL Consult the T able of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment.
6 INTRODUCTION.
W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedur es that could r esult in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A WORD ABOUT YOUR KEYS ............. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Locking Doors W ith A Key ................ 1 4 ▫ Key-In-Ignition Reminder ................ 1 4 䡵 SENTR Y KEY® .
䡵 POWER WINDOWS ..................... 2 3 ▫ Power W indow Switches ................. 2 3 䡵 LIFTGA TE ............................ 2 5 䡵 OCCUP ANT RESTRAINTS ................ 2 6 ▫ Lap/Shoulder Belts .................... 2 9 ▫ Lap/Shoulder Belt Untwisting Procedure .
▫ Exhaust Gas .......................... 7 8 ▫ Safety Checks Y ou Should Make Inside The V ehicle .......................... 7 9 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .
A WORD ABOUT YOUR KEYS The key fob contains the Remote Keyless Entry (RKE) transmitter with an integrated key . T o use the mechanical key simply press the mechanical key release button.
W ARNING! • Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK and re- move the Key Fob from the ignition. When leaving the vehicle, always lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
W ARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended.
NOTE: A key which has not been programmed is also considered an invalid key , even if it is cut to fit the ignition switch lock cylinder for that vehicle. If the V ehicle Security Light is on after the key is turned to the ON/RUN position, it indicates that there is a problem with the electronics.
General Information The Sentry Key® system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause unde- sired operation.
NOTE: The line of transmission must not be blocked with metal objects. T o Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door or twice, within five seconds, to unlock all doors and the liftgate.
2. Rotate the screw located on the side of the Key Fob using a small screwdriver . 3. T ake out the battery case. Remove and replace the battery observing its polarity .
4. Refit the battery case inside the Key Fob and turn the screw to lock it into place. General Information This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference.
If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. W eak battery in RKE transmitter . The expected life of the battery is from one to two years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios.
W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • For personal security and safety in the event of a collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Power Door Locks A power door lock switch is incorporated into the driver door handle. Push or pull the handle to lock or unlock the doors and liftgate. If the driver ’s door handle is pushed a red lock indicator will show on the driver ’s door handle (indicating locked) when the door is closed, the door will lock.
Autoclose When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). T o change the setting proceed as follows: 1. Briefly pr ess the MENU button “On” or “Off” will flash on the display (according to the previous setting).
Auto-Down The driver’s door window switch have an Auto-Down feature. Pr ess the window switch for approximately one second, release, and the window will go down automati- cally . T o cancel the Auto-Down movement, operate the switch in either the up or down direction and release the switch.
LIFTGA TE T o unlock the liftgate, use the Remote Keyless Entry (RKE) transmitter or activate the power door lock switches located on the driver door handle. T o open the liftgate, squeeze the liftgate release handle and pull the liftgate open with one fluid motion.
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags .
Here are some simple steps you can take to minimize the risk of harm from a deploying air bag: 1. Children 12 years old and under should always ride buckled up in a rear seat. W ARNING! • Never place a rear facing infant seat in front of an air bag.
5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers ar e pr ovided in ⬙ If Y ou Need Consumer Assistance. ⬙ W ARNING! • Relying on the air bags alone could lead to more severe injuries in a collision.
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly . Never use a lap/shoulder belt or lap belt for more than one person, no matter what their size.
W ARNING! • A belt buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you prop- erly .
W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly .
Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
If the passenger seating position is equipped with an ALR and is being used for normal usage: Only pull the belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR. If the ALR is activated, you will hear a ratcheting sound as the belt retracts.
W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
Enhanced Seat Belt Use Reminder System (BeltAlert®) BeltAlert® is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert®) to fasten their seat belts. The feature is active whenever the ignition is on.
Seat Belt Extender If a seat belt is too short even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized studio can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough.
In addition, the vehicle is equipped with a Supplemental Driver Side Knee Air Bag mounted in the instrument panel below the steering column. NOTE: The Driver and Passenger Advanced Front Air Bags are certified to new Federal regulations for Ad- vanced Air Bags.
This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver , front, and rear passengers sitting next to a window . The SABIC are located above the side windows. The trim covering the SABIC is labeled SRS AIRBAG.
• Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system provide.
Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags (SAB) pr ovide enhanced pr otection to help protect an occupant during a side impact. The SAB are marked with an air bag label sewn into the outboard side of the front seats.
NOTE: Air Bag covers may not be obvious in the interior trim, but they will open during air bag deployment. The system includes side impact sensors that are cali- brated to deploy the Seat-Mounted Side Air Bags (SAB) and SABIC during impacts that requir e air bag occupant protection.
W ARNING! • Y our vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC. The area where the SABIC is located should remain free from any obstructions.
Along with seat belts and pretensioners, Advanced Front Air Bags and the Supplemental Driver Side Knee Air Bag work with the knee impact bolsters to provide improved protection for the driver and front passenger .
The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision. Because air bag sensors measur e vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an air bag should have deployed.
W ARNING! Ignoring the Air Bag W arning Light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the .
Supplemental Driver Side Knee Air Bag Inflator Unit The Supplemental Driver Side Knee Air Bag unit is located in the instrument panel trim beneath the steering column. When the ORC detects a collision requiring the Advanced Front Air Bags, it signals the inflator units.
A quantity of non-toxic gas is generated to inflate the side curtain air bag. The inflating side curtain air bag pushes the outside edge of the headliner out of the way and covers the window .
Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine com- partment and fuel tank before resetting the system and starting the engine.
Customer Action Customer Will See 1. T urn ignition OFF . (T urn Signal Switch Must be placed in Neutral State). 2. T urn ignition ON. Left T urn Light is OFF . Right T urn Light BLINKS. 3. T urn Right T urn Signal Switch ON. Right T urn Light is ON SOLID.
If A Deployment Occurs The Advanced Fr ont Air Bags ar e designed to deflate immediately after deployment. NOTE: Front and/or side air bags will not deploy in all collisions.
W ARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retractor assemblies replaced by an authorized studio immedi- ately . Also, have the Occupant Restraint Controller (ORC) system serviced as well.
Air Bag W arning Light Y ou will want to have the air bags ready to inflate for your protection in a collision. The Air Bag W arning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components.
vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to recor d such data as: • How various systems in your vehicle were .
Children 12 years or younger should ride properly buckled up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear seats rather than in the front. W ARNING! In a collision, an unrestrained child can become a projectile inside the vehicle.
Summary Of Recommendations For Restraining Children In V ehicles Child Size, Height, W eight Or Age Recommended T ype Of Child Restraint Infants and T oddlers Children who are two years old or younger.
Infants And Child Restraints Safety experts recommend that children ride rearwar d- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. T wo types of child restraints can be used r earward-facing: infant carriers and convertible child seats.
remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly .
Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs ar e long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.
Lower Anchors And T ethers For Children (LA TCH) Restraint System Y our vehicle is equipped with the child restraint anchor- age system called LA TCH, which stands for Lower Anchors and T ethers for CHildren. The LA TCH system has thr ee vehicle anchor points for installing LA TCH- equipped child seats.
LA TCH Positions For Installing Child Restraints In This V ehicle • Lower Anchorage Symbol 2 anchorages per seating position • T op T ether Anchorage Symbol 2 THINGS TO KNOW BEFORE ST ARTING YOUR .
What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.
Can two child restraints be attached using a common lower LA TCH anchorage? No Never “share” a LA TCH anchorage with two or more child restraints. If the center position does not have dedicated LA.
Locating The LA TCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They ar e just visible when you lean into the rear seat to install the child restraint.
Locating The LA TCH Anchorages In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. LA TCH-compatible child r estraint systems will be equipped with a rigid bar or a flexible strap on each side.
2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can mor e easily attach the hooks or connectors to the vehicle anchorages. 3. Place the child seat between the lower anchorages for that seating position.
How T o Stow An Unused ALR Seatbelt When using the LA TCH attaching system to install a child r estraint, stow all ALR seat belts that are not being used by other occupants or being used to secure child restraints. An unused belt could injure a child if they play with it and accidentally lock the seatbelt retractor .
Installing Child Restraints Using The V ehicle Seat Belt The seat belts in the passenger seating positions are equipped with either a Switchable Automatic Locking Re- tractor (ALR) or a cinching latch plate or both.
What is the weight limit (child’s weight + weight of the child restraint) for using the T ether Anchor with the seat belt to attach a forward facing child restraint? W eight limit of the Child Restr.
Installing A Child Restraint W ith A Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit.
8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the section “Installing Child Restraints Using the T op T ether Anchorage” for directions to attach a tether anchor .
4. Finally , pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat. 5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap.
Installing Child Restraints Using The T op T ether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. Y ou may need to move the seat forward to provide better access to the tether anchorage.
W ARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap.
CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty .
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision.
W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners.
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tir es for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 POWER CONVERTIBLE T OP — IF EQUIPPED . .86 ▫ Lowering The Power T op ................. 8 6 ▫ Raising The Power T op .................. 8 6 ▫ Power Convertible T op Relearn Procedur e ..
▫ EZ Entry Feature ..................... .103 ▫ Memory Feature ..................... .103 ▫ Heated Seats — If Equipped ............ .104 ▫ Head Restraints ...................... .105 䡵 TO OPEN AND CLOSE THE HOOD ........ .107 䡵 LIGHTS ..
▫ T o V ary The Speed Setting .............. .120 ▫ T o Accelerate For Passing ............... .121 䡵 REAR P ARK ASSIST — IF EQUIPPED ....... .122 ▫ Rear Park Assist Sensors ............... .123 ▫ Rear Park Assist Alerts ................. .
POWER CONVERTIBLE TOP — IF EQUIPPED On vehicles equipped with a power convertible top, the power convertible top switch is located on the overhead console. The switch contains two buttons. The passenger side button, is used to open the power top, and the driver side button, is used to close the power top.
NOTE: Rail lubrication is recommended every 2000 cycles, or if scratching noises due to dust are present. Refer to “Fluids, Lubes, and Genuine Part” in “Maintain- ing Y our V ehicle” for information.
Power Convertible T op Relearn Procedure If your power convertible top does not operate in the Auto Opening/Closing mode (automatically opening/ closing to the one-quarter open and three-quarter open comfort stops), or if the trunk lid does not open - the following relearn procedur e may be necessary .
Wind Stop The W ind Stop installs in the backseat area of the vehicle. The W ind Stop will not interfere with power top opera- tion. Therefor e, it can remain installed when the top is up. MIRRORS Inside Day/Night Mirror The mirror can be adjusted up, down, left, and right for various drivers.
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the featur e on or off by pr essing the button at the base of the mirror . A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Power Mirrors The power mirr or contr ols ar e located on the driver ’s door trim panel. The power mirror controls consist of a mirr or select switch and a four-way mirror control switch. T o adjust a mirror , press the mirr or select switch to either the L (left) or R (right) to select the mirror you need to adjust.
Spotter Mirror — If Equipped Some models are equipped with a driver’s side spotter mirror . The spotter mirror allows for a greater range of visibility on the driver’s side of the vehicle. Folding Mirrors The exterior mirrors are hinged to allow the mirror to pivot forward or rearwar d to help avoid damage.
Sun Visors The driver and passenger sun visors are located on the headliner , near the front windshield. The sun visor can be rotated downwar d or up against the door glass.
having to take your eyes off the road or remove your hands from the steering wheel. T o use voice commands you are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.
your mobile phone manually and visually using the steering wheel controls and the instrument panel multi- function display . T o get started with BLUE&ME™ hands-free kit with voice recognition, you have to simply pair your Bluetooth® wir eless technology enabled mobile phone with the system.
• T o interact with BLUE&ME™ you can use either the buttons on the steering wheel or voice commands. W ith voice recognition, you can perform system func- tions by speaking voice commands, also identified as “keywords”. When the system recognizes a keyword, it will respond with the appropriate action.
• Conference Call — you can call another contact while you are engaged in a phone conversation (with Bluetooth® phones supporting this option). • Call W aiting — while engaged in a phone conv.
Message reader functions are managed by the control buttons on the steering wheel or by the BLUE&ME™ voice commands. The BLUE&ME™ message reader enables the following operations: • T o display an indicator on the instrument panel that indicates you have received a new SMS text.
The media player enables the following operations: • Digital Audio Playback — you can play all your digital audio files (.mp3, .wma, .wav , .aac) or play a customized playlist (.m3u or .wpl format). • Audio File Selection By Category — you can play all audio files of a certain category , e.
W ARNING! (Continued) wheel. Y our primary responsibility is the safe op- eration of your vehicle. • Read and Follow Instructions: before using your system, read and follow all instructions and safety information provided in this “Owner ’ s Manual”.
Front Seats Forward/Rearward Adjustment The adjusting bar is located at the fr ont of the seats, near the floor . While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once the desired position is reached.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
EZ Entry Feature The driver and front passenger seats have an EZ entry feature for rear seat passengers. Pull forward on the release lever , located on the outboard side of the seatback, dump the seatback forward, then slide the seat forward to allow access in and out of the rear seat.
Memory Function Option 2 — Seat Back Only Memory: After using the EZ entry function, the seat back may first be returned upright prior to going back to the last fore/aft (memory) position on the tracks. This results in the seat back memory being set only – The track will then be locked forward of its last set fore/aft memory posi- tion.
W ARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat.
T o raise the head restraint, pull upward on the head restraint. T o lower the head restraint, press the push button, located at the base of the head r estraint, and push downward on the head restraint. The Reactive Head Restraints will automatically return to their normal position following a rear impact.
Rear Head Restraints T o raise the head restraint, pull upward on the head r e- straint. T o lower the head restraint, press the push button, located at the base of the head restraint, and push down- ward on the head restraint.
2. Rotate the safety catch under the front edge of the hood, near the center , and raise the hood. Lift the hood prop rod that clips to the right side (left side when standing in front of the hood) of the engine compartment. Place the hood prop r od in the hole of hood hinge to secure the hood in the open position.
LIGHTS Multifunction Lever The multifunction lever , located on the left side of the steering wheel, controls the operation of the headlights, headlight beam selection, passing light and turn signals. NOTE: The external lights can only be turned on with the ignition in the ON/RUN position.
High Beams W ith the low beams activated, push the multi- function lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams.
NOTE: The indicators will automatically turn off when the turn has been completed and the steering wheel is returned to a straight position. Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off.
Deactivation Pull the multifunction lever toward the steering wheel and hold it for more than two seconds. Interior Lights The interior light switches are located in the overhead console. The interior lights can be set to three different positions (Off/Left Position, Center Position, On/Right Position).
• When the doors are unlocked with the Key Fob a 10 second timer is activated. • When the doors are locked with the Key Fob the lights will turn off. Interior Light T iming (On/Right Position) • When all doors are closed a 15 minute timer is activated.
WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer lever is located on the right side of the steering column. NOTE: The windshield wipers/washers will only oper- ate with the ignition in the ON/RUN position. Front Windshield Wiper Operation There are five differ ent modes of operation for the front windshield wipers.
NOTE: The Intermittent function only has one detent but wiper delay will vary with changes in vehicle speed. As vehicle speed increases the delay time will decrease. Low Speed Push the lever downward to the second detent. The wipers will operate at low speed.
CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur .
Rear Windshield W asher Operation Push the windshield wiper/washer lever toward the instrument panel to activate the rear washer . Push and hold the lever for mor e than a half second and the wipers will activate automatically for thr ee cycles after the lever is released.
W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
NOTE: In order to ensure proper operation, the Elec- tronic Speed Control system has been designed to shut down if multiple Speed Contr ol functions are operated at the same time. If this occurs, the Electronic Speed Contr ol system can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
T o Deactivate A soft tap on the brake pedal, pushing the CANC button, or normal brake pressur e while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory . Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory .
Metric Speed (km/h) • Pressing the RES (+) button once will result in a 2 km/h increase in set speed. Each subsequent tap of the button results in an increase of 2 km/h. • If the button is continually pr essed, the set speed will continue to increase until the button is released, then the new set speed will be established.
NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control.
Rear Park Assist Sensors The four Rear Park Assist sensors, located in the r ear fascia/bumper , monitor the area behind the vehicle that is within the sensors’ field of view .
Audible And Visual Signals Supplied By The Rear Park Assist System SIGNAL MEANING INDICA TION Obstacle Distance An obstacle is present within the sensors’ field of view Audible signal (dashboard loudspeaker) • Sound pulses emitted at a rate that increases as the distance decreases.
Failure Indications A malfunction of the Rear Park Assist sensors or system is indicated, during REVERSE gear engagement, by the instrument panel warning icon. The warning icon is illuminated and a message is displayed on the multifunction display (if equipped).
• Clean the Rear Park Assist sensors regularly , taking care not to scratch or damage them. The sensors must not be covered with ice, snow , slush, mud, dirt or debris.
W ARNING! • Drivers must be careful when backing up even when using ParkSense®. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up.
POWER SUNROOF — IF EQUIPPED The power sunroof roof switch is located in the overhead console. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location acces- sible to children.
T o Open Press and hold the power sunroof switch rearwar d for approximately one second and the sunroof will stop at the vented position. Press the switch a second time and hold for approximately one second and release, the sunroof will open fully , then stop automatically .
Emergency Operation In case of electrical failure the sunroof can be operated with the hex wr ench that is located in the glove box. There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof.
Power is available when the ignition switch is in the ON/RUN or ST ART position. Insert the cigar lighter or accessory plug into the outlet for use. T o preserve the heating element, do not hold the lighter in the heating position. CAUTION! • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts.
W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
CUPHOLDERS For the driver and front passenger , cupholders are lo- cated on the floor console between the front seats. For rear passengers, there ar e cupholders located on the floor between the front driver and passenger seats.
STORAGE Glove Compartment The glove compartment is located on the right side of the instrument panel. Pull outward on the glove compart- ment latch to open the glove compartment. Push the glove compartment door upward to close it. CARGO AREA FEA TURES The rear seatbacks have a fold down featur e to allow increased cargo capacity .
Rear Seat Release Buttons Folded Rear Seats 136 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
REAR WINDOW FEA TURES Rear Window Defroster The r ear window defr oster button is located in the center of the instrument panel, below the radio. Press this button to turn on the rear window defroster . An indicator in the instrument cluster will illuminate when the rear window defroster is on.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES ......... .141 䡵 INSTRUMENT CLUSTER — POP , LOUNGE, 500C ............................... .142 䡵 INSTRUMENT CLUSTER — SPORT ......... .143 䡵 INSTRUMENT CLUSTER DESCRIPTIONS .
▫ T echnical Specifications ................ .178 ▫ Quick Guide ........................ .179 ▫ General Information ................... .182 ▫ Functions And Adjustments ............. .183 ▫ Radio ............................. .191 ▫ SiriusXM Satellite Radio — If Equipped .
INSTRUMENT P ANEL FEA TURES 1 — Side V ent 7 — Passenger Air Bag 13 — Storage Compartment 2 — Multifunction Lever – Light Control 8 — Glove Compartment 14 — Shift Lever 3 — Instrument .
INSTRUMENT CLUSTER — POP , LOUNGE, 500C 142 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER — SPORT 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 143.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Glow Plug Light — If Equipped This vehicle will inhibit engine cranking when the ambient temperature is less than –22° F (–30° C) and the oil temperature sensor reading indicates an engine block heater has not been used.
3. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 4. Low Fuel Light When the fuel level reaches appr oximately 1.0 gal- lon (3.8L) this light will turn on, and remain on until fuel is added. 5.
9. Air Bag W arning Light This light will turn on for four seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized studio as soon as possible.
If jump starting is required, r efer to “Jump Starting Procedur es” in “What T o Do In Emergencies”. 13. Power Steering System W arning This light is used to manage the electrical warning of the EPS (Power Steering System). Refer to “Power Steering” in “Starting and Operating” for further information.
As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Certain conditions, such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require towing.
If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied.
If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is r equired. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle.
odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster .
EVIC Displays 1 — T emperature Indicator 6 — Message Display 2 — Fuel Level Gauge 7 — Coolant T emperature Gauge 3 — Clock 8 — Digital Speedometer 4 — Odometer 9 — Ice W arning Indicat.
EVIC Control Buttons Press the MENU button briefly to access the menu and/or go to next scr een or to confirm the required menu option. Press and hold the MENU button (approximately one second) to return to the main screen. Press the UP button to scr oll upward thr ough the displayed menu and the related options or to incr ease the displayed value.
• Set Date • See Radio • Speed Display • Autoclose • Units • Language • Buzzer V olume • Button V olume • Daylights (D.R.L.) • Hill Start • T ir e Pressure • Unlock Driver Door First • Unlock All Doors • Exit Menu Selecting An Option Of The Main Menu W ithout Submenu 1.
Selecting An Option Of The Main Menu W ith Submenu 1. Briefly press the MENU button to display the first submenu option. 2. Press the UP or DOWN button (by single presses) to scroll through all the submenu options. 3. Briefly press the MENU button to select the displayed submenu option and to open the relevant setup menu.
1. T urn the ignition switch to the ON position. (do not start the engine.) 2. Fully depress the accelerator pedal slowly , three times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset.
NOTE: If the reset operation occurs in the presence of the screens concerning T rip A or T rip B, only the infor- mation associated with T rip A or T rip B functions will be reset. Start Of T rip Procedure W ith the ignition on, press and hold the TRIP button for over one second to reset.
• A verage speed B • T ravel time B (driving time) NOTE: “T rip B” functions may be excluded (see “T rip B Data”). “Range” and “Instantaneous consumption” can- not be reset.
A verage Speed This value shows the vehicle’s average speed as a func- tion of the overall time elapsed since the last reset. T ravel T ime This value shows the time elapsed since the last reset.
3. When the function is activated (On), briefly press the MENU button to display the presently set activation speed. Pressing the UP or DOWN buttons selects the speed limit.
For activation / deactivation, proceed as follows: 1. Briefly press the MENU button. “On” or “Off” will flash on the display (according to previous setting).
NOTE: • The setting will incr ease or decr ease by one unit each time the UP or DOWN button is pressed. Press and hold the button to increase/decrease the setting rapidly . Save the setting by briefly pressing the button when you approach the required setting.
NOTE: The setting will increase or decrease by one unit each time the UP or DOWN button is pressed. Press and hold the UP or DOWN button to increase/decr ease the setting rapidly . Save the setting by briefly pressing the button when you approach the requir ed setting.
T o activate (On) or to deactivate (Off) the speed display feature, proceed as follows: 1. Briefly pr ess the MENU button. “MPH”, “km/h”, then “Off” will flash on the display (according to previous setting). 2. Press the UP or DOWN button to select display deactivation “Off”, “MPH” or “km/h”.
T o set the required unit, proceed as follows: 1. Briefly press the MENU button to display the three sub-menus. 2. Press the UP or DOWN button to navigate the three sub-menus. 3. Select the r equired sub-menu and then briefly press the MENU button. 4.
5. Briefly press the MENU button to return to the sub-menu. When you have made the r equired settings, briefly press the MENU button to go back to the sub-menu scr een, or press and hold the MENU button (approximately one second) to go back to the main screen without storing the settings.
3. Briefly press the MENU button to go back to the menu screen, or press and hold the MENU button (appr oxi- mately one second) to go back to the main screen without storing the settings. Button V olume (Button V olume Adjustment) This function may be used to adjust the volume of the beep accompanying the buttons.
4. Briefly press the MENU button to go back to the menu screen, or press and hold the button (approximately one second) to go back to the main screen without storing the settings. GSI (Gear Shift Indicator) This function may be used to set the Gear Shift Indicator in two submenus: “Fuel Econ On” and “Fuel Econ Off.
Hill Start Assist This function is used when starting a vehicle from a stop on a hill. Hill Start Assist maintains the same level of brake pressure the driver applied for a short period of time after the foot has been removed from the brake pedal. Proceed as follows to switch this function on or off: 1.
Drivers Door is selected, you must press the RKE trans- mitter UNLOCK button twice to unlock the passenger door . When All Doors is selected, both of the doors will unlock on the first pr ess of the RKE transmitter UNLOCK button. T o make your selection, press and release the SELECT button until “Unlock Driver Door” or “All Doors” appears.
Introduction The radio has been designed according to the specifica- tions of the passenger compartment, with a personalized design to match the style of the dashboard. If the radio has BLUE&ME™, refer to the appr opriate “BLUE&ME™ User ’s Manual” for further information.
CDs The presence of dirt, scratches or distortions on the CDs could cause skipping and poor sound quality while it is playing. For optimal playback conditions, follow these guidelines: • Only use branded CDs. • Clean every CD thoroughly removing any finger marks or dust using a soft cloth.
where it may be, for example, “COPY CONTROL”, “COPY PROTECTED”, “THIS CD CANNOT BE PLA YED ON A PC/MAC”. • The CD player is capable of reading most compression systems currently in use, following the development of these systems, the reading of all compression formats is not guaranteed.
Quick Guide Radio Controls BUTTON GENERAL FUNCTIONS MODE On Short button press Off Short button press TUNER AM, FM, SA T (if equipped) source selection Short repeated button press A-B-C Cycles A, B, C.
BUTTON GENERAL FUNCTIONS MODE (Mute/Pause Button) V olume activation/deactivation (Mute/Pause) Short button press AUDIO Audio adjustments: low tones (BASS), high tones (TREBLE), left/ right balance (B.
BUTTON RADIO FUNCTIONS MODE Radio Station Search: • Automatic Search • Manual Search Automatic search: press buttons or (long press for fast forward) Manual search: press buttons or (long press fo.
General Information The radio offers the following functions: Radio Section • PLL tuning with FM/AM bands • RBDS (Radio Broadcast Data System) • Automatic/manual station tuning • FM Multipath .
CD/MP3 Section • MP3-Info function (ID3-T AG) • Folder selection (previous/next) • T rack selection (forward/backward) • Fast forward/rewind through tracks • MP3 Display function: display of.
Selecting The Radio Functions By pressing the TUNER button briefly and repeatedly , the following audio sources can be selected cyclically: • AM, FM and Satellite Bands (if equipped) Selecting The CD Function By briefly pressing the MEDIA button, the CD audio source can be selected (only if a CD is loaded).
Use the buttons or to scroll through the Menu functions. T o change the setting of the selected function, use the or buttons. The current status of the selected function appears on the display .
Balance Adjustment Proceed as follows: 1. Press AUDIO button. 2. Press the or button to set “Balance” in the AUDIO menu. 3. Press the button to increase the sound from the left speakers or the button to increase the sound from the right speakers. By pressing the or buttons briefly , the levels will change progressively .
Loudness Function — If Equipped The Loudness function improves the volume of the sound while listening at low volumes, increasing the bass and treble.
User EQ Settings Function — If Equipped T o set a personalized equalizer adjustment: 1. Press AUDIO button. 2. Use the or buttons to set EQ function. 3. Use or buttons to select ⬙ EQ User . ⬙ 4. Press MENU button to start adjusting equalizer . 5.
• SiriusXM T elephone Number • System Reset • Speed V olume • On V olume Limit Press the MENU button again to exit the Menu function. Speed V olume Function — If Equipped This function autom.
• “On volume limit: off” – The radio will come on at the same volume as before it was switched off. The volume level can be between 0 and 40. Use the buttons or to change the setting. NOTE: • Using the Menu it is only possible to adjust the activation/deactivation of the function and not the minimum or maximum volume value.
System Reset Function This function is used to r estore all settings to the factory values. The options are: • NO — No restore intervention. • YES — The default parameters will be restor ed. Dur- ing such operation, the wording “Resetting” appears on the display .
Preset Buttons The buttons numbered from 1 to 5 are used to set the following pre-selections: • 15 in the FM band (5 in FMA, 5 in FMB, 5 in FMC • 10 in the AM band (5 in AMA, 5 in AMB) • 15 in S.
Stereophonic Broadcasters If the incoming signal is weak, the reproduction is automatically switched from Stereo to Mono. SiriusXM Satellite Radio — If Equipped SiriusXM Satellite Radio W ith over 130 channels, SiriusXM Satellite Radio brings you more of what you love.
The Program T ypes available are: All, Pop, Rock, Electronic/Dance, Hip-Hop/R&B, Country , Christian, Jazz/Standards, Classical, Latin/W orld, Sports, Enter- tainment, T alk, News, NPR, Comedy , Family & Health, Religion, T raffic/W eather . Y ou can find the SiriusXM current terms and conditions at http://www .
SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. and its subsidiaries. SiriusXM Radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming ar e provided by SiriusXM and are subject to change.
CD Player Introduction This chapter describes the operation of the CD player only . T o operate the radio, refer to the description in the “Functions and Adjustments” chapter . CD Player Selection T o activate the CD player built into the equipment, proceed as follows: • Load a CD with the equipment switched on.
Press the button with the radio turned on, to activate the motorized CD ejection system. After ejection, the last audio source listened to before playing the CD will be heard.
.
The specifications and operating conditions for playing MP3 files are the following: • The CD-ROMs used should be burned in accordance with ISO standard 9660. • The music files should have the extension “.mp3” or “.wma” files with a different extension will not be repr oduced.
When one of the ID3-T AG pieces of information is chosen to be displayed (T itle, Artist, Album) and this informa- tion has not been recorded for the track played, the text ⬙ UNKNOWN ⬙ will be displayed for that field. Selection Of Next/Previous Folder Press the button to select a next folder or the but- ton to select the previous folder .
Source Can Not Be Selected Nothing has been loaded. Load the CD or the MP3 CD to be listened to. CD Player The CD Does Not Play: The CD is dirty . Clean the CD. The CD is scratched. T ry using another CD. The CD Can Not Be Loaded: A CD is already loaded.
iPod®/USB/MEDIA PLA YER CONTROL — IF EQUIPPED This feature allows an iPod® or external USB device to be plugged into the USB port, located in the glove compartment. Refer to the appr opriate Blue&Me™ radio User ’s Manual for iPod® or external USB device support capability .
The right-hand control is a rocker -type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume.
CD Player Operation Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the pr evious track if it is within one second after the current track begins to play .
NOTE: If you experience dif ficulty in playing a particular disc, it may be damaged (e.g., scratched, reflective coat- ing removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service.
1. T emperature Contr ol Rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to the left into the blue area of the scale indicates cooler temperatures, while rotating to the right into the red area indicates warmer temperatures.
• Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that they ar e directed toward the r ear seat passengers for maximum airflow to the rear .
5. A/C Button Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. MAX A/C For maximum cooling, use the A/C and recir culation modes at the same time. ECONOMY MODE If economy mode is desir ed, press the A/C button to turn OFF the indicator light and the A/C compressor .
1. AUTO T emperatur e Control (A TC) Button Controls airflow , temperatur e, distribution, and air recircu- lation automatically . Press and release to select. Performing this function will cause the A TC to switch between manual mode and automatic modes.
8. Panel Mode Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow . Performing this function will cause the A TC to switch into manual mode. NOTE: The center instrument panel outlets can be aimed so that they ar e directed toward the r ear seat passengers for maximum airflow to the rear .
Automatic Operation 1. Press the AUTO button on the Automatic T emperature Control (A TC) Panel, the indicator will illuminate when on. 2. Next, adjust the temperature you would like the system to maintain by adjusting the temperature con- trol buttons.
Manual Operation This system offers a full complement of manual override features. NOTE: Each of these features operates independently from each other . If any featur e is contr olled manually , temperature control will continue to operate automati- cally .
Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Bi-Level Air is directed thr ough the panel and floor outlets. Press and release the Panel mode button and Floor mode button to enter Bi-Level mode, the indicators illuminate when ON.
NOTE: • If the system is in Mix or Defrost Mode, the A/C can be turned of f, but the A/C system shall r emain active to prevent fogging of the windows. • If fog or mist appears on the windshield or side glass, select Defrost mode and increase blower speed.
As the temperature gets colder , it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the Defrost mode.
V acation Storage Anytime you stor e your vehicle, or keep it out of service (i.e., vacation) for two weeks or mor e, run the air conditioning system at idle for about five minutes in the fresh air using the high blower setting.
ST ARTING AND OPERA TING CONTENTS 䡵 ST AR TING PROCEDURES ............... .221 ▫ Manual T ransmission — If Equipped ...... .221 ▫ Automatic T ransmission — If Equipped .... .221 ▫ Normal Starting ...................... .221 ▫ Cold W eather Operation .
䡵 AUTOSTICK® — IF EQUIPPED ........... .235 ▫ Operation .......................... .235 䡵 DRIVING ON SLIPPER Y SURF ACES ........ .237 ▫ Acceleration ........................ .237 ▫ T raction ........................... .237 䡵 DRIVING THROUGH W A TER .
▫ T ir e T erminology And Definitions ......... .260 ▫ T ir e Loading And T ire Pr essure .......... .261 䡵 TIRES — GENERAL INFORMA TION ....... .265 ▫ T ir e Pressure ....................... .265 ▫ T ir e Inflation Pressur es ............
▫ MMT In Gasoline .................... .287 ▫ Materials Added T o Fuel ............... .288 ▫ Fuel System Cautions .................. .288 ▫ Carbon Monoxide W arnings ............ .289 䡵 ADDING FUEL ....................... .289 ▫ Fuel Filler Cap (Gas Cap) .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
T urn the ignition switch to the A VV (ST AR T) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the ST OP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedur e.
3. If the engine fails to start within 10 seconds, place the ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the Extended Park Starting procedur e. 4. If the engine fails to start after 8 attempts, allow the starter to cool for at least 10 minutes, then repeat the procedur e.
T urbocharger “Cool Down” This vehicle is equipped with an after-run pump to cool the turbocharger after the engine is shut off. Depending on the type of driving and the amount of cargo, the pump will run for up to 10 minutes after the engine has been shut of f to cir culate coolant thr ough the turbocharger .
NOTE: T o shift into REVERSE from NEUTRAL, lift the ring under the knob and, at the same time move the gearshift lever to the right and then backward. Use each gear in numerical order; do not skip a gear . Be sure the transmission is in first gear , not third, when starting from a standing position.
Recommended Shift Speeds T o use your manual transmission for optimal fuel economy , it should be upshifted as listed in the following table. Manual T ransmission Recommended Shift Speeds Units In mph (km/h) Engine Size Accel- era- tion Rate 1t o2 2t o3 3t o4 4t o5 1.
AUTOMA TIC TRANSMISSION — IF EQUIPPED CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
W ARNING! (Continued) locked in P ARK, securing the vehicle against un- wanted movement. • When leaving the vehicle, always remove the igni- tion key and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
Six-Speed Automatic T ransmission The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. Y ou must pr ess the brake pedal to move the shift lever out of P ARK (Refer to “Brake/T ransmission Shift Inter- lock System” in this section).
The transmission shift lever has P ARK, REVERSE, NEU- TRAL, DRIVE, and AutoStick® shift positions. Manual shifts can be made using the AutoStick® shift contr ol (refer to “AutoStick®” in this section for further informa- tion).
W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • Y our vehicle could move and injure you and others if it is not completely in P ARK.
W ARNING! (Continued) warned not to touch the parking brake, brake pedal or the shift lever . • Do not leave the ignition key/Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
NEUTRAL (N) Use this range when the vehicle is standing for pr olonged periods with the engine running. The engine may be started in this range. Apply the parking brake and shift the transmission into P ARK if you must leave the vehicle. NOTE: Do not coast in NEUTRAL and never turn off the ignition to coast down a hill.
If the transmission temperature exceeds normal operat- ing limits, the transmission contr oller will expand the range of torque converter clutch engagement. This is done to prevent transmission damage due to overheat- ing. During cold temperatures, transmission operation may be modified depending on engine coolant temperature.
NOTE: Even if the transmission can be reset, we r ecom- mend that you visit your authorized studio at your earliest possible convenience. Y our authorized studio has diagnostic equipment to determine if the problem could recur . If the transmission cannot be reset, authorized studio service is required.
• The transmission will automatically downshift to first gear when coming to a stop. After a stop, the driver should manually upshift (+) the transmission as the vehicle is accelerated. • W ith six-speed automatic transmission, you can start out (from a stop) in first, second, or thir d gear .
DRIVING ON SLIPPERY SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a differ ence in the surface traction under the front (driving) wheels.
DRIVING THROUGH W A TER Driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-of f).
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water .
POWER STEERING The electric power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will vary its assist to provide light efforts while parking and good feel while driving.
NOTE: • Even if the power steering assistance is no longer operational, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at low speeds and during parking maneuvers.
When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
CAUTION! If the Brake W arning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized studio immediately .
Automatic T ransmission — If Equipped The Sport mode increases steering feedback to the driver with slight increase in effort and changes the transmis- sion shift schedules for more aggressive shifting. This driving mode is useful while driving on twisty r oads where more steering precision is desired in spirited cornering.
BRAKE SYSTEM In the event power assist is lost for any reason (for example; repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be significantly more than that requir ed with the power system operating.
W ARNING! • Pumping the Anti-Lock Brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop.
Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lockup and help avoid skidding on slippery surfaces during braking.
T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability .
HSA Activation Criteria The following criteria must be met in order for HSA to activate: • V ehicle must be stopped. • V ehicle must be on a 2.5% (manual transmission) or 7% grade or greater (automatic transmission) hill. • Gear selection matches vehicle uphill direction (i.
Electronic Stability Control (ESC) This system enhances dir ectional control and stability of the vehicle under various driving conditions. ESC cor- rects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteering or understeering condi- tion.
NOTE: The ESC Off switch is located left of the steering column (Manual T ransmission Only). W ARNING! The Electronic Stability Control (ESC) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
ESC Operating Modes The ESC system has two available operating modes. Full On This is the normal operating mode for ESC. Whenever the vehicle is started, the ESC system will be in On mode. This mode should be used for most driving situations. ESC should only be turned to Partial Off for specific reasons as noted below .
W ARNING! • When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature de- scribed in the TCS section), has been disabled and the “ESC Off Indicator Light” will be illuminated.
NOTE: • The ESC Activation/Malfunction Indicator Light and the ESC OFF Indicator Light come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously .
NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.
EXAMPLE: R = Construction code — ⬙ R ⬙ means radial construction — ⬙ D ⬙ means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index — A num.
EXAMPLE: Load Identification: ⴖ ....blank.... ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinfor ced) tire Light Load .
EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of T ransportation — This symbol certifies that the tire is in compliance with the U.S. Department of T ransportation tire safety standards and is appro.
Tire T erminology And Definitions T erm Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door . Cold T ire Inflation Pressure Cold tire inflation pressur e is defined as the tire pressur e after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.
Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The pr oper cold tire inflation pressur e is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door . T ire And Loading Information Placard This placard tells you important information about the: 1.
3. T ir e size designed for your vehicle. 4. Cold tir e inflation pressur es for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in .
264 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressures can cause uneven wear pat- terns to develop across the tire tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressur e”.
Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important.
Consult an authorized tire dealer for tire repairs and additional information. Damaged Run Flat tires, or Run Flat tir es that have experienced a loss of pressure should be replaced imme- diately with another Run Flat tire of identical size and service description (Load Index and Speed Code).
If you need snow tires, select tir es equivalent in size and type to the original equipment tir es. Use snow tir es only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
Spare Tires — If Equipped NOTE: For vehicles equipped with TIREFIT instead of a spare tire, please refer to “TIREFIT KIT” in “What T o Do In Emergencies” for further information.
Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tir e. Do not install more than one compact spare tire and wheel on the vehicle at any given time.
tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity . W ARNING! Limited-use spares are for emergency use only . In- stallation of this limited-use spare tire affects vehicle handling.
T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators ar e molded into the bottom of the tr ead grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have a collision resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS (TRACTION DEVICES) Use of traction devices r equire sufficient tir e-to-body clearance. Follow these recommendations to guard against damage: • T raction device must be of proper size for the tire, as recommended by the traction device manufacturer .
CAUTION! (Continued) • Observe the traction device manufacturer ’ s instruc- tions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer ’ s if it is less than 30 mph (48 km/h).
TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tir e pr essure based on the vehicle recom- mended cold tire pressure. The tire pr essure will vary with temperature by about 1 psi (7 kPa) for every 12° F (6.
For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressur e of 30 psi (207 kPa). If the ambient temperature is 68° F (20° C) and the measured tire pressure is 27 psi (186 kPa), a tempera- ture drop to 20° F (-7° C) will decrease the tire pr essure to approximately 23 psi (159 kPa).
CAUTION! (Continued) • After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the T ire Pressure Moni- toring Sensor .
Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressur e lev- els. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure r eadings to the Receiver Module.
Check TPMS W arnings The T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and remain on solid when a system fault is detected, an audible chime will be activated and the “T ire Pressur e Monitoring Unavailable” text message will display .
4. This occurs for each subsequent ignition key cycle, a chime will sound and the T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid.
FUEL REQUIREMENTS — 1.4L Engine This engine is designed to meet all emis- sion r egulations and provide satisfactory fuel economy and performance when us- ing high-quality unleaded ⬙ regular ⬙ gaso- line with a minimum octane rating of 87. For optimum performance and fuel economy the use of 91 octane or higher is recommended.
Reformulated Gasoline Many areas of the country requir e the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality .
If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • Operate in a lean mode. • OBD II “Malfunction Indicator Light” on. • Poor engine performance. • Poor cold start and cold drivability .
Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel.
Carbon Monoxide Warnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel (Continued) CAUTION! (Continued) cap (gas cap).
W ARNING! (Continued) • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. NOTE: • When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheels OFF the Ground Manual T ransmission Automatic T ransmission Flat T ow NONE T ransmi.
NOTE: This vehicle may be towed on a flatbed or vehicle trailer provided all four wheels ar e OFF the ground. CAUTION! T owing this vehicle in violation of the above require- ments can cause severe transmission damage. Dam- age from improper towing is not covered under the New V ehicle Limited W arranty .
.
WHA T TO DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .297 䡵 IF YOUR ENGINE OVERHEA TS ........... .297 䡵 TIREFIT KIT — IF EQUIPPED ............ .298 ▫ TIREFIT Storage ..................... .299 ▫ TIREFIT Kit Components And Operation .
䡵 FREEING A STUCK VEHICLE ............ .326 䡵 SHIFT LEVER OVERRIDE ............... .327 䡵 TOWING A DISABLED VEHICLE .......... .329 ▫ Automatic T ransmission ................ .330 ▫ Manual T ransmission .................. .331 䡵 ENHANCED ACCIDENT RESPONSE SYSTEM .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the instrument panel below the radio. Press the switch to turn on the Hazard W arning flashers. When the switch is activated, all direc- tional turn signals will flash on and of f to warn oncoming traffic of an emergency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. T urn of f the air conditioning and wait until the pointer drops back into the normal range.
TIREFIT Storage The TIREFIT kit is located under the front driver’s seat. TIREFIT Kit Components And Operation TIREFIT Kit Location TIREFIT Components 1 — Sealant Bottle 5 — Mode Select Knob 2 .
Using The Mode Select Knob And Hoses Y our TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only . Use the Black Air Pump Hose (7) when selecting this mode.
• The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use and need to be replaced after each use. Always replace these components immediately at your original equipment vehicle studio.
W ARNING! • Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the TIREFIT kit. • Do not use TIREFIT or drive the vehicle under the following circumstances: – If the puncture in the tire tread is approximately 1/4” (6 mm) or larger .
W ARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately . Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water .
5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 V olt power outlet. NOTE: Do not remove foreign objects (e.g., scr ews or nails) from the tire. (C) Injecting TIREFIT Sealant Into The Deflated T ire: • Always start the engine before turning ON the TIRE- FIT kit.
NOTE: If the Mode Select Knob (5) is on Air Mode and the pump is operating, air will dispense from the Air Pump Hose (7) only , not the Sealant Hose (6). If the sealant (white fluid) does flow through the Sealant Hose (6): 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds).
3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly pr oceed to (D) “Drive V e- hicle.” CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully .
(E) After Driving: Pull over to a safe location. Refer to “Whenever Y ou Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2. Uncoil the power plug and insert the plug into the vehicle’s 12 V olt power outlet.
5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized studio as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced, advise the autho- rized studio or service center that the tire has been sealed using the TIREFIT service kit.
T orque Specifications Lug Nut/Bolt T orque **Lug Nut/ Bolt Size Lug Nut/ Bolt Socket Size 66 Ft-Lbs (90 N·m) Steel Wheels Only 75 Ft-Lbs (100 N·m) Aluminum Wheels Only M12 x 1.25 17 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
T ighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel.
W ARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Removal The spare tire is stowed to the underbody below the cargo area. 1. Remove the plug located in the rear cargo area. 2. Fit the wrench tool over the drive nut. Use the wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle.
CAUTION! The winch mechanism is designed for use with the jack wrench tool only . Use of an air wrench or other power tools is not recommended and they can dam- age the winch.
4. T ilt the retainer at the end of the cable and pull it through the center of the wheel. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel.
W ARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
2. Loosen, but do not remove, the wheel bolts by turning them to the left one turn while the wheel is still on the ground. NOTE: There are fr ont and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding).
3. T urn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
NOTE: Before using the swivel wrench to remove the wheel bolts be sure to remove the center cap of the wheel by inserting the angled tab end of the swivel wrench into the notched part of the center cap. 5. Remove the wheel bolts and pull the wheel of f the hub.
W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel bolts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel bolts.
10. Place the deflated (flat) tire in the cargo area. Have the tire repair ed or replaced as soon as possible. W ARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immedi- ately .
W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 V olts or damage to the battery , starter motor , alternator or electrical system may occur .
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
Jump-Starting Procedure W ARNING! Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion. CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle.
5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery . 6. Once the engine is started, remove the jumper cables in the reverse sequence: Disconnecting The Jumper Cables 1.
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved using a rocking motion. T urn the steering wheel right and left to clear the area around the front wheels.
CAUTION! (Continued) • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no trans- mission shifting occurring).
4. Press and maintain firm pressur e on the brake pedal. 5. Insert a small scr ewdriver or similar tool into the access hole, and push and hold the override release lever in. 6. Move the shift lever to the NEUTRAL position. 7. The vehicle may then be started in NEUTRAL.
TOWING A DISABLED VEHICLE This section describes procedur es for towing a disabled vehicle using a commercial wrecker service. T owing Condition Wheels OFF The Ground AUTOMA TIC TRANSMISSION MANUAL TR.
If you must use the accessories (wipers, defr osters, etc.) while being towed, the ignition must be in the ON/RUN position. CAUTION! • DO NOT use sling-type equipment when towing. V ehicle damage may occur . • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components.
Manual T ransmission • V ehicle can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • V ehicle can be towed with the front wheels elevated.
Carefully check the vehicle for fuel leaks in the engine compartment and on the ground near the engine com- partment and fuel tank before resetting the system and starting the engine.
5. T urn Right T urn Signal Switch ON. Right T urn Light is ON SOLID. Left T urn Light BLINKS. 6. T urn Left T urn Signal Switch ON. Left T urn Light is ON SOLID. Right T urn Light is ON SOLID. 7. T urn Left T urn Signal Switch OFF . (T urn Signal Switch Must be placed in Neutral State).
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP AR TMENT — 1.4L ......... .337 䡵 ENGINE COMP AR TMENT — 1.4L TURBO . . . .338 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .339 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS ..................
▫ Automatic T ransmission — Aisin F21-250 HD T ransmission — If Equipped ............ .367 ▫ Appearance Care And Protection From Corrosion .......................... .369 ▫ Convertible T op Care – If Equipped ....... .375 䡵 FUSES .......
ENGINE COMP ARTMENT — 1.4L 1 — Engine Coolant Reservoir 5 — Battery 2 — Engine Oil Dipstick 6 — Air Cleaner Filter 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 — Front Distribution .
ENGINE COMP ARTMENT — 1.4L TURBO 1 — Engine Coolant Reservoir 5 — Battery 2 — Engine Oil Dipstick 6 — Engine Oil Fill 3 — Brake Fluid Reservoir 7 — W asher Fluid Reservoir 4 — Front Di.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems.
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system.
3. Approximately 15 seconds later , one of two things will happen: • The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
STUDIO SERVICE Y our authorized studio has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, or air conditioning.
CAUTION! Do not overfill the engine with oil. Overfilling the engine with oil will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This loss of oil pressure and increased oil temperature could damage your engine.
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Engine Oil V iscosity — 1.4L T urbo Engine (SAE Grade) SAE 5W -40 full synthetic engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy .
Engine Oil Filter Selection This manufacturer’s engines have a full-flow type dispos- able oil filter . Use a filter of this type for replacement. The quality of replacement filters varies considerably . Only high quality filters should be used to assur e most efficient service.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized studio at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving pr oduct.
2. Pull the console closeout cover rearwar d to disengage the front retaining tab and remove the cover . 3. Remove the two 5.5mm screws (1 and 2) that secure the particulate air filter cover to the HV AC housing.
4. Remove the A/C air filter by pulling it straight out of the housing. T ake note of the air filter position indicators. 5. Install the A/C air filter with the air filter position indicators pointing in the same direction as removal. CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter .
Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease, such as MOP AR® Spray White Lube to assur e quiet, easy opera- tion and to protect against rust and wear .
NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor perfor- mance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary .
3. Grab the bottom of the wiper blade and r otate it forward to unsnap the blade pivot pin from the wiper blade holder . 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place.
W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine perfor- mance and cause serious damage to the engine.
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle.
Coolant Checks Check engine coolant (antifreeze) protection every 12 months (befor e the onset of freezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- freeze).
CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive T echnology (OA T) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
Adding Coolant Y our vehicle has been built with an impr oved engine coolant (OA T coolant conforming to MS-12106) that allows extended maintenance intervals. This engine cool- ant (antifreeze) can be used up to ten years or 150,000 miles (240,000 km) before replacement.
NOTE: • Some vehicles requir e special tools to add coolant properly . Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system please contact your local authorized studio.
Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant expansion bottle. • Check the coolant freeze point in the radiator and in the coolant expansion bottle.
W ARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Riding the brakes may also reduce braking capacity in an emergency .
W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its perfor- mance.
Manual T ransmission — If Equipped Lubricant Selection Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Fluid Level Check Check the fluid level by removing the fill plug.
CAUTION! Using a transmission fluid other than the manufac- turer ’ s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Refer to “Fluids, Lubricants, and Genuine Parts” in this section for fluid specifications.
CAUTION! If a transmission fluid leak occurs, visit your autho- rized studio immediately . Severe transmission dam- age may occur . Y our authorized studio has the proper tools to adjust the fluid level accurately .
What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar .
Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, r ocker panels, and tr unk be kept clear and open.
NOTE: If your vehicle is equipped with Dark V apor Chrome wheels DO NOT USE wheel cleaners, abrasives or polishing compounds. They will permanently damage this finish and such damage is not covered by the New V ehicle Limited W arranty . USE ONL Y MILD SOAP AND W A TER WITH A SOFT CLOTH.
Interior Care Use MOP AR® T otal Clean to clean fabric upholstery and carpeting. Use MOP AR® T otal Clean to clean vinyl upholstery . MOP AR® T otal Clean is specifically recommended for leather upholstery . Y our leather upholstery can be best preserved by regular cleaning with a damp soft cloth.
T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
CAUTION! (Continued) • Remove any standing water from the top and dry the surface before opening it. Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicles interior .
General Cleaning Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles. W ash in partial shade instead of direct sun. W et the entire vehicle before washing the top. The top should be washed with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dishwashing soap.
FUSES W ARNING! • When replacing a blown fuse, always use an appro- priate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material.
Cav- ity Ve - hicle Fuse Num- ber Mini Fuse Description 1 F12 7.5 Amp Brown Right Low Beam 2 F32 5 Amp Ta n Front and Rear Ceil- ing Lights T runk and Door Courtesy Lights 3 F53 5 Amp Ta n Instrument .
Cav- ity Ve - hicle Fuse Num- ber Mini Fuse Description 6 F43 20 Amp Y ellow Bi-Directional W asher 7 F48 20 Amp Y ellow Passenger Power W indow 8 F13 7.
Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery . T o access the fuses, press the release tabs and remove the cover . The ID number of the electrical component correspond- ing to each fuse can be found on the back of the cover .
Cavity Maxi Fuse Mini Fuse Description F06 30 Amp Green Radiator Fan - Low Speed F07 40 Amp Orange Radiator Fan - High Speed F08 30 Amp Green Blower Motor F09 10 Amp Red Powertrain F10 10 Amp Red Horn.
Cavity Maxi Fuse Mini Fuse Description F19 7.5 Amp Brown Air Conditioning F20 15 Amp Blue Heated Seats – If Equipped F21 15 Amp Blue Fuel Pump F22 20 Amp Y ellow Powertrain F23 20 Amp Y ellow Anti-Lock Brake V alves F24 7.
VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery . • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (e.
Bulb Number Side Direction Lamps W5W Rear T urn Signal Lamps PY21W Rear Side Marker Lamps W3W Rear T ail and Stop Lamps PY21W/5W Rear Backup Lamps W16W Center High Mounted Stop Lamp W5W License Plate Lamps LED (See Au- thorized studio) NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized studio.
Front T urn Signal, Parking And Daytime Running Lamps 1. T urn the steering wheel completely to the left or right. 2. Open the wheel housing access door . 3. Remove the plastic cap from the back of the lamp housing. 4. Rotate bulb/socket counter-clockwise.
Front/Rear Side Marker Lamps 1. Remove portion of the wheel liner to allow hand access to side marker lamp. 2. Rotate the bulb socket counterclockwise, and remove the bulb and socket assembly from the housing. 3. Pull the bulb from the socket and insert the replace- ment bulb.
3. Remove the four screws (using a T20 driver) and separate the backplate from the lamp housing. 4. Remove the tail, stop, or turn signal bulbs by pushing them slightly and turning counter-clockwise. 5. Remove the backup lamp bulb by pulling straight out.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 10.5 Gallons 40 Liters Engine Oil with Filter 1.4L/1.4L T urbo Engine 4 Quarts 3.8 Liters Cooling System 1.4L/1.4L T urbo Engine (MOP AR® Antifr eeze/Engine Coolant 10 Y ear/150,000 Mile Formula) — with Manual T ransmission 4.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant - 1.4L/1.4L T urbo Engine W e recommend you use MOP AR® Antifreeze/Coolant 10 Y ear/ 150,000 Mile Formula OA T (Organic Additive T echnology) meeting the requir ements of Chrysler Material Standard MS-12106.
Component Fluid, Lubricant, or Genuine Part Spark Plugs - 1.4L T urbo Engine W e recommend you use MOP AR® Spark Plugs (Gap 0.026 in [.65 mm]) Fuel Selection - 1.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .394 ▫ Maintenance Chart ................... .395 8 M A I N T E N A N C E S C H E D U L E S.
MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate.
Required Maintenance Intervals . Refer to the maintenance schedules on the following page for the requir ed maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter . • Rotate the tires.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
** The spark plug change interval is mileage based only , yearly intervals do not apply . W ARNING! • Y ou can be badly injured working on or around a motor vehicle.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE .................. .401 ▫ Prepar e For The Appointment ............ .401 ▫ Prepar e A List ....................... .401 ▫ Be Reasonable W ith Requests .
䡵 DEP ARTMENT OF TRANSPOR T A TION UNIFORM TIRE QUALITY GRADES ....... .406 ▫ T readwear .......................... .407 ▫ T raction Grades .....
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
are most concerned that you get pr ompt and high quality service. The manufacturer’s authorized studio have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner .
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized studio has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Y ou will be pleased with their sincere efforts to r esolve any warranty issues or related concerns.
campaign. However , NHTSA cannot become involved in individual problems between you, your authorized stu- dio, and the manufacturer . T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .
Diagnostic Procedure Manuals Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features.
T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tir e graded 100.
The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor V ehicle Safety Standard No. 109. Grades B and A repr esent higher levels of performance on the laboratory test wheel, than the minimum requir ed by law .
INDEX 10.
Adding Engine Coolant (Antifreeze) ........... .361 Adding Fuel ............................ .289 Adding W asher Fluid ..................... .355 Additives, Fuel .......................... .288 Airbag .................................. 3 8 Airbag Deployment .
Battery ................................ .347 Jump Starting ......................... .321 Keyless T ransmitter Replacement (RKE) ........ 1 7 Belts, Seat ............................... 7 9 Body Mechanism Lubrication ................ .353 B-Pillar Location .
Cleaning Wheels .............................. .371 W indshield W iper Blades ................. .353 Climate Control ......................... .205 Clutch ................................ .365 Clutch Fluid ............................ .365 Compact Disc (CD) Maintenance .
Driving Through Flowing, Rising, or Shallow Standing W ater ............................... .238 Electrical Power Outlets .................... .130 Electric Remote Mirrors ...................... 9 1 Electronic Brake Control System .............. .246 Brake Assist System .
Exhaust System ........................... 7 8 Exterior Lights ............................ 8 1 Filler Location Fuel ....................... .155 Filters Air Cleaner .......................... .347 Air Conditioning ...................... .350 Engine Fuel .
Gasoline, Clean Air ....................... .286 Gasoline (Fuel) .......................... .285 Gasoline, Reformulated .................... .286 Gauges Coolant T emperature .................... .153 Fuel ................................ .155 Odometer .
Interior Lighting .......................... 1 1 2 Introduction .............................. 4 Jacking Instructions ....................... .315 Jack Location ............................ 3 1 1 Jack Operation .......................... .310 Jump Starting .
Service Engine Soon (Malfunction Indicator) . . . .149 T ire Pressure Monitoring (TPMS) ........... .147 T raction Control ....................... .253 T urn Signal ............................ 8 1 V oltage ............................. .146 W ait to Start .
Octane Rating, Gasoline (Fuel) ............... .285 Odometer .............................. .154 T r i p ................................ .154 Oil Change Indicator ...................... .160 Oil Change Indicator , Reset ................. .160 Oil, Engine .
Pretensioners Seat Belts .............................. 3 6 Radial Ply T ires ......................... .268 Radio Operation ......................... .175 Radio Reception ......................... .175 Radio (Sound Systems) .................... .175 Rear Liftgate (Sedan) .
Rear Seat .............................. 2 9 Untwisting Procedure ..................... 3 4 Seat Belts (Sedan) .......................... 2 6 Seats ................................. .100 Adjustment .......................... .100 Heated ..............
Studio Service ........................... .342 Sun Roof .............................. .128 Supplemental Restraint System - Airbag .......... 3 8 Synthetic Engine Oil ...................... .346 T achometer ............................. .155 T emperature Control, Automatic (A TC) .
Recreational .......................... .292 T raction ............................... .237 T raction Control ......................... .248 T railer T owing .......................... .291 T ransaxle Automatic ............................. 1 2 Autostick .
W ind Buffeting ............................ 2 4 W indow Fogging ........................ .214 W indows ................................ 2 3 Power ................................ 2 3 W indshield Defroster ....................... 7 9 W indshield W ashers .
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations ar e incorporated into t his vehicle’ s elec tronic sys tem to pro vide immunity to radio frequency signals. Mobile two-wa y radios and telephone equipment must be inst alled properly by trained personnel.
Ein wichtiger Punkt beim Kauf des Geräts Fiat 500c (2014) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fiat 500c (2014) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fiat 500c (2014) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fiat 500c (2014) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fiat 500c (2014) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fiat 500c (2014) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fiat 500c (2014) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fiat 500c (2014). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fiat 500c (2014) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
