Benutzeranleitung / Produktwartung X900-24XS des Produzenten Allied Telesis
Zur Seite of 55
x900 Series Switch and SwitchBlade ® x908 Installation and Safety Guide A T -8948 x900-48FE x900-48FE-N x900-48FS A T -9924T A T -9924SP A T -9924Ts x900-12XT/S x900-24XT x900-24XT -N x900-24XS Switc.
x900 Series Switch and SwitchBlade ® x908 Installation and Safety Guide A T -8948 A T -9924Ts x900-48FE x900-12XT/S x900-48FE-N x900-24XT x900-48FS x900-24XT -N A T -9924T x900-24XS A T -9924SP SwitchBlade ® x908 Download the complete document set fr om www .
x900 Series Switch and SwitchBlade ® x908 2 x900 Series Switch and Switch Blade ® x908 Installation an d Safety Guide Document Number C613-04052-00 REV P © 2011 Allied T elesis, Inc. All rights reserved. No part of this publication ma y be repr oduced without prior written permission fr om Allied T elesis, Inc.
Installation and Safety Guide 3 Contents About this Guide ...................... ..................... ..................... ......................... ..................... 4 Package Contents ..................... ..................... ...............
x900 Series Switch and SwitchBlade ® x908 4 About this Guide This Installation and Saf ety Guide describes ho w to install and log in to the follow ing switches: Y ou can download th e complete document set fo r x900 Series s witches and SwitchBlade x908 fr om www .
Installation and Safety Guide 5 The follo wing items are shipp ed with each switch. Contact y our authorised distributor or r eseller if an y ar e damaged or missing.
x900 Series Switch and SwitchBlade ® x908 6 Selecting a Site Befor e y ou install the s witch, r evie w the f ollowing cons iderations about its location. ■ A T -8948, x900-48FE, x900-48FS, and A T -9900 switches r equir e an ambient temperature fr om 0º C to 50ºC (32º F to 122º F).
Installation and Safety Guide 7 Installing the Switch Po rts on the switch ar e suitable onl y for c onnections within buildings (intra- building) and with cables une xposed to the o utside. Y ou can install the switch on a lev el surface , such as a desktop o r bench, or in a standard 19-inch rack.
x900 Series Switch and SwitchBlade ® x908 8 ■ All bare conductors must be coated w ith an appr opriate antio xidant compound befor e making crimp connections. Wa r n i n g B o t h A C a n d D C v e r s i o n s o f t h i s equipment must be earthed through the pow er cables pro vided.
Installation and Safety Guide 9 In a 19-inch rack 1. Ensure the rack has sufficie nt space for the switch and its c ables. For the switch’ s requir ements, see “Selecting a Site” on page 6 . 2. Install cage nuts at the fr ont of the rack so they ar e ready fo r the rack- mount scr ews i n the foll owing steps.
x900 Series Switch and SwitchBlade ® x908 10 Fitting a bracket on a SwitchBlade x908 s witch Fitting a brack et on all o ther x900 Series s witches 5. Mount the switch into the rack fr om the front, and tighten the rack-mount scre ws. T wo people ar e r equir ed at this point.
Installation and Safety Guide 11 Applying P o wer to the Switch Po we r supply ba ys are in the rear of the s witch. Depending on the model, the switch ma y hav e a PSU , FOM, or blanking plate ove r a pow er suppl y ba y .
x900 Series Switch and SwitchBlade ® x908 12 1. Plug the A C power cord t hat is pr ovided into the pow er inlet on the PSU. 2. Connect the po wer cord to the main po we r sour ce. 3. On the A T -PWR05, set the Run/Standby s witch to Run. 4. Check that the PSU LED on the front panel of the switch is lit gr een.
Installation and Safety Guide 13 Wa r n i n g When SBx908 devices are connected with VCS stacking cables (ei ther HS-STK-CBL or XEM-STK-CBL), each indi vidual stack member chassis must be additionally gr ounded by using the rear gr ounding-terminal on each device.
x900 Series Switch and SwitchBlade ® x908 14 8. Ensure that the cir cuit br eak er is off for the suppl y cir cuit and the Run/ Standby s witch on the PSU . Release the Run/Standb y switch so that it is not pushed in (which is the Off po sition). 9. Connect the supply cable wires to the cir cuit br eak er .
Installation and Safety Guide 15 PWR05 DC PWR05 DC Po w er supply specificatio ns: ■ functional range 40 to 60 V, 4 8 V nominal ■ supports either positive gr ounded or negativ e gr ounded operatio.
x900 Series Switch and SwitchBlade ® x908 16 5. Confirm that the switc h is r eceiving pow er . Check that the PSU LED on the fr ont panel of the s witch corr esponding to the PSU ba y lights green. If the LED does not light gr een, check th e Run/ Standby s witch.
Installation and Safety Guide 17 Connecting to the Switch All x900 Series switches and the SwitchBlade x908 can be configur ed using the Command Line Int erface (CLI) and the Gra phical User Inter face (GUI).
x900 Series Switch and SwitchBlade ® x908 18 When x900-24XT , x900-24XT -N, x900-24XS, or SwitchBlade x908 switches ar e connec ted to form a vi rtual chassis stack (VCS), the ETH0 port has additional operational functions. See the Har dware Ref er ence for more information .
Installation and Safety Guide 19 5. Configure th e switch. Refer to the AlliedW are Plus™ Operating System Sof twar e Refer ence for detailed inf ormation about configuring the softwar e .
x900 Series Switch and SwitchBlade ® x908 20 Using the AlliedW are Plus Operating System GUI Follow this pr ocedur e to establish a con nection to an x900 or x908 series switch, so y ou can use the GUI to configur e the switc h. 1. Select a PC to use and identify its subnet.
Installation and Safety Guide 21 7. Sa v e the configuration. Sa v e the curr ent configuration as the default startup configuration by using the commands: awplus>enable awplus#copy running-config .
x900 Series Switch and SwitchBlade ® x908 22 Using the AlliedW are Operating System CLI Depending on the model, an ASYN0/CONSOLE and/or ETH0 port is on the fr ont of the switch for installation and maintenance. 1. T o use the ETH0 port , ph ysicall y connect it to the terminal or PC, and check that the port’ s LEDs are lit.
Installation and Safety Guide 23 4. Change the passw ord. A manager account with the default pas sw ord is a s erious security risk. Remember the ne w pass wor d because ther e is no wa y to r etrie ve it if you forget it. T o change the account passwor d, use the set passw ord command.
x900 Series Switch and SwitchBlade ® x908 24 Using the AlliedW are Operating System GUI Follo w this pr ocedure to establish a con nection to an A T -9900 series s witch, so you can use the GUI to configur e the switch. 1. Select a PC to use and identify its subnet.
Installation and Safety Guide 25 Checking LEDs The follo wing LEDs r eport operations and faults on x900 Series and SwitchBlade x908 s witches: ■ “System LEDs” on page 25 ■ “Stacking LEDs”.
x900 Series Switch and SwitchBlade ® x908 26 PO WER Green The PSU is o perating and suppl ying pow er to the switch. The v o ltage output is w ithin specification. V alid for the x900-12XT/S swi tch. Fault Red The switch o r management so ftwar e is malfu nctionin g.
Installation and Safety Guide 27 Stacking LEDs The follo wing table describes how LEDs on the SwitchBlade x908 report operations and faul ts on the r ear panel stacking ports. PWR01 LEDs The follo wing table describes LEDs o n the PWR01 pow er supply unit.
x900 Series Switch and SwitchBlade ® x908 28 PWR05 LEDs The followi ng is a diagr am of the LE Ds in the PW R05 power supply units : PWR05 AC LEDs The follo wing table describes LEDs on the PWR05 A C power suppl y unit for the SwitchBlade x908.
Installation and Safety Guide 29 PWR05 DC LEDs The follo wing table describes LEDs on the PWR05 DC pow e r supply unit for the SwitchBlade x908. LED State Description IN Gree n DC input v oltage is within 40 VDC to 60 VD C. Off DC input voltag e is outside the acceptable range.
x900 Series Switch and SwitchBlade ® x908 30 Obtaining Documentation and Resour ces The complete docume nt set for x900 Series switches and SwitchBlade x908 includes: ■ this Installation and Saf et.
Installation and Safety Guide 31 A T -TFTP Ser ver for Windows is a TFTP ( T r ivial File T ransfer Protocol ) server fo r transferrin g softwar e v ersions, configurat ion scripts and other files between a PC and the switc h. Y ou download A T -TFTP Server fr om www .
x900 Series Switch and SwitchBlade ® x908 32 Standards Where applicable, the pr oducts in this docum ent meet the f ollowing standards: Category Appro val Agency and Requir ement Safety UL60950-1 CAN/CSA-C22.
Installation and Safety Guide 33 Safety W ARNING: In a domestic envir onment this pr oduct ma y cause radio interfer ence in which case the user ma y be req uired to ta ke adequate measur es. W ARNING: Class 1 Laser product. W ARNING: Do not stare into the lase r beam.
x900 Series Switch and SwitchBlade ® x908 34 Lithium Battery - Should be changed only by authorised se r vice personne l. CAU TION : Danger of explosion if ba tter y is incorr ectly replaced. Replace o nly with Lithium Battery , type CR2032, and dispose of in a ccordance with th e manufactur er’ s recommendations and all local code s.
Installation and Safety Guide 35 Sicherheit WA R N U N G : Bei V erwendung zu Hause kann dieses Pr odukt Funkstörungen her v orrufen. In diese m Fall müßte der Anw ender angemessene Gegenmaßnahmen ergre ifen. WA R N U N G Laserprodukt der Klasse 1.
x900 Series Switch and SwitchBlade ® x908 36 Lithium-Batterie - Sollte n ur v on einem geschulten qualifizierten T echnik er ausgetauscht we rden. V ORSICHT : Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Nur mit einer gleichen Batterie oder einem gleichw er tigen Batterietyp nach Empfehlung de s Herstellers ersetzen.
Installation and Safety Guide 37 Sikk erhed AD V ARSEL: I et hjemligt miljø kunne dette produkt f orårsage radio forstyrr else . Bliver det ti lfældet, påkræv es bruger en m uligvis at tage tilstrækk elige foranstaltninge r . AD V ARSEL Laserprodukt a v klasse 1.
x900 Series Switch and SwitchBlade ® x908 38 med samme eller e n tilsvar ende type der anbefales af pro ducenten. Kassér brugte batterier i over ensstemmelse med producentens instruk tioner . ALLE LANDE: Installation af p r oduktet skal sk e i over ensstemmelse med lokal og national lovgivning for elektrisk e installationer .
Installation and Safety Guide 39 V eiligheid W AARSCHUWING: Binnenshuis kan dit pr oduct radiostoring ver oorzaken, in welk geval de gebruik er ve rplicht kan w ord en om gepaste maatr egelen te nemen. W AARSHUWING Klasse-1 laser pr odukt. W AARCHUWING Neit in de straal staren .
x900 Series Switch and SwitchBlade ® x908 40 Lithium batterij. Mag alleen wo rden v er vangen door een daartoe opgeleide en bev oegde technicus. OPGELET : Ge vaar vo or ontploffing indien de batterij verk eerd wor dt vergange n. Alleen v ervangen door hetzelfde of een gelijk waardig, door de fabrikant aanbe volen type.
Installation and Safety Guide 41 Sécurité MISE EN GARDE : dans un envir onnement domestique, ce produit peut pro v oquer des interfér ences radioélectriques. Auquel cas, l’utilisateur de vra prendr e les mesur es adéquates. A TTENTION Producit laser di class e 1.
x900 Series Switch and SwitchBlade ® x908 42 A TTENTION : RÉP AR TITION DE LA CHARGE MÉC ANIQUE - Le montage du matériel dans le bâti doit êtr e eff ectué de telle manièr e que la répar tition de la charge mécanique ne pose aucun danger .
Installation and Safety Guide 43 Remar que: Ce système pe ut fonctionner a vec des système s C.C . dotés d’une mise à la ter re po sitive ou négativ e.
x900 Series Switch and SwitchBlade ® x908 44 Litiumparisto - V aihdon vo i suorittaa vain k oulutettu ja pätevä te knikk o . Va r o i t u s : Räjähdysvaara, jos paristo on vaihdet tu väärin. V aihda vain samaan tai vastaa vaan tyyppiin , jota valmistaja suosittelee.
Installation and Safety Guide 45 Norme di Sicur ezza A VVER T ENZA: in ambiente domestico questo pr odotto potr ebbe causar e radio interfe renza. In questo caso potrebb e richiedersi all’utent e di pre ndere gli adeguati pro vv edimenti. A VVER T ENZA Pro dotto laser di Classe 1.
x900 Series Switch and SwitchBlade ® x908 46 Batteria al litio - V a sostituita solo da un tecnico spec ializzato e qualificato . A TTENZIONE: l'errata sostituzione della batteri a può causare pericolo di esplosioni. Sostituir e solamente con lo stesso ti po o con uno equ ivalente raccomandato dal pr oduttor e .
Installation and Safety Guide 47 Sikk erhet AD V ARSEL: Hvis dette pr oduktet ben yttes til p rivat bruk, kan pr oduktet forårsak e radiofo rstyrr else. Hvis dette skjer , må bruker en ta de nødvendige forh olds regler . AD V ARSEL Laserprodukt a v klasse 1.
x900 Series Switch and SwitchBlade ® x908 48 ALLE LAND: Produktet m å installer es i samsvar med de lo kale og nasjonale elektrisk e k oder . Advarsel: VED TILK OP LING TIL ET LIKESTRØMSNETT , SKAL DU BAR E MONTERE UTSTYRET PÅ ET STED HVOR UVEDK OMNE IKKE HAR ADGANG.
Installation and Safety Guide 49 Segurança AV I S O : Num ambiente doméstico este pr oduto pode causar interfe rência na radiorr ecepção e, neste caso , pode ser necessário que o utent e tome as medidas adequada s. AV I S O Produto laser de classe 1 AV I S O Não olhe fixamente para o raio .
x900 Series Switch and SwitchBlade ® x908 50 Bateria de lítio - Só dev e ser troc ada por técnico qualificado e treinado . CUID ADO : Se a bateria não f or devidamente instalada há p erigo de exp losão . Substitua somente pelo mesmo tipo o u equivalente, conforme r ecomendado pelo fabricante.
Installation and Safety Guide 51 Seguridad AD VER TENCIA: en un entorno doméstico , este pr oducto puede causar radiointerfer encias, en cuy o caso , puede requerirse del usuari o que tome las medidas que sean conv enientes al respecto . ¡AD VER TENCIA! Pr oducto láser Clase 1.
x900 Series Switch and SwitchBlade ® x908 52 A TENCION : C ARGA MECANIC A - El montaje del equipo en el bastidor debe realizarse de manera tal que no cause un a condición peligr osa debido a la distribución desigual del peso . Batería de litio - Sólo deb erá ser cambiada por un téc nico entr enado y califi cado .
Installation and Safety Guide 53 Nota: Este sistema funcionará co n sistemas de CC co n conexión positiva o negativa a tier ra. Säk erhet V ARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vil ke t kan tvinga användar en till att vidtaga erford erliga åtgärder .
x900 Series Switch and SwitchBlade ® x908 54 Litium batteri - Får endast bytas a v utbildade och kvalificerade teknik er . VA R N I N G : Risk för explosion om felaktigt bat teri används. Byt endast mot samma eller likvär dig typ batteri, rek ommenderat av tillv erkaren.
Ein wichtiger Punkt beim Kauf des Geräts Allied Telesis X900-24XS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Allied Telesis X900-24XS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Allied Telesis X900-24XS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Allied Telesis X900-24XS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Allied Telesis X900-24XS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Allied Telesis X900-24XS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Allied Telesis X900-24XS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Allied Telesis X900-24XS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Allied Telesis X900-24XS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
