Benutzeranleitung / Produktwartung is3100z series des Produzenten Ferris Industries
Zur Seite of 104
Parts Rev. Date: 07/02/10 IS3100Z Series Zero-Turn Riding Mower Manual 5100543 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 Briggs and Stratton Yard Power Products Group TP 400-7282-BA.
Not for Reproduction.
Table Of Content s Tor q ue S p ecification Char t ...... .......................... .......... .................... ............ ............. ...... Inside Back Cov er MODEL COMPONENTS PAGE Main Frame & Front Suspension Group - 61" Deck Mode l .
Main Frame & Fr ont Suspensi on Group - 61" Deck Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 4 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Main Frame & Fr ont Suspensi on Group - 61" Deck Model Footn ote s 1 5400486B 1 WELD, MAIN FRAME, IS3000Z (Serial No.
Main Frame & Fr ont Suspensi on Group - 72" Deck Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 6 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Main Frame & Fr ont Suspensi on Group - 72" Deck Model Footn ote s 1 5400486B 1 WELD, MAIN FRAME, IS3000Z (Serial No. : 2013221685 & Below) 2 5025126 2 NUT, 1/4-20 HEX SER R. FLANGE 3 5022673 2 BUMPER, RUBBER 1/4-20 4 5025265X28 4 3/4-16 X 3.
Rear Bumper, Roll Bar & Seat Belt Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Rear Bumper, Roll Bar & Seat Belt Group Footn ote s 1 5100139 1 SEAT BELT RETRACTING 2 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE 3 5025293 6 WASHER 3/8" GD9 4 5.
Seat Mount & Floor Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Seat Mount & Floor Group Footn ote s 1 5400509B 1 FLOOR PAN, 3000 - RED (S/N: 2013102109 & Below) 2 5025155 4 WASHER, 5/16" SAE 3 5025144X6 6 BOLT, 1/4-20.
Fuel Supply Hose & Tank Replacement Parts Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 12 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Fuel Supply Hose & Tank Replacement Parts Group Footn ote s 1 5023358 1 VALVE, FUEL, STR. OUTLET 2 5020835 5 CLAMP, HOSE, EXTERNAL, 1/2 - RED 3 5050831X49 1 HOSE, 1/4" FUEL, 49.00" 4 5022922 1 CLAMP, #4 HOSE, STAINLESS (Kawasaki model only.
Fuel Ta nk & Mount Grou p NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Fuel Ta nk & Mount Grou p Footn ote s 1 5401095B 2 PLATE, TANK BADGE - IS2 000/COBALT - RED 2 5025386 8 SCREW, Allen Head, #10-24 x 3/8" 3 5025155 10 WASHER, .
Instrument Co ntrol Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Instrument Co ntrol Group Footn ote s 1 5025299X4 3 SCREW, ALLEN HEAD, 1/4-20X1/2 2 5025010X6 2 BOLT, 1/4-20 X 3/4" GD5 (S/N: 2012617338 & Below) 3 5021662 1 .
Engine & PTO Gr oup - Briggs & Stratton 30HP (All ) & 32HP (S/N: 2013556395 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 18 © Copyright Briggs and Stratton.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Briggs & Stratton 30HP (All ) & 32HP (S/N: 2013556395 & Below) Footn ote s 1 - 1 ENGINE, 32 HP BRIGGS & STRATTON (32HP Briggs & Stra tton models only.
Engine & PTO Gr oup - Briggs & Stratton 30HP (All ) & 32HP (S/N: 2013556395 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 20 © Copyright Briggs and Stratton.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Briggs & Stratton 30HP (All ) & 32HP (S/N: 2013556395 & Below) Footn ote s 42 842859 1 SCREEN, ARRESTER (Not shown) 43 5025531 1 SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH 44 5101492 1 TIE WRAP, 24" LONG (Not shown.
Engine & PTO Gr oup - Kohle r 30 HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kohle r 30 HP Footn ote s 1 - 1 ENGINE, 30 HP KOHLER 2 5100130X2 1 MUFFLER, 30 HP KOHLER 3 5021144X1 1 OIL FILTER 4 5100517 1 EXHAUST EXTENSION, 3 0 HP 4 5100518 1 CLAMP, EXHAUST EXTENSION (Not show n.
Engine & PTO Gr oup - Kohle r 30 HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kohle r 30 HP Footn ote s 41 5100875 1 CLUTCH, WARNER,# 5218-158 (S/N: 2000496996 - 2000497897) (When replacing 5100875 clutch order 5023233 clutch & 5045475 spacer) 42 5101641 1 SCREEN, SPARK ARRESTER (Not shown.
Engine & PTO Gr oup - Kaw asaki 26 HP Liquid Cooled NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 26 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kaw asaki 26 HP Liquid Cooled Footn ote s 1 5401138B 1 GUARD, RADIATOR SCREEN PROTECTOR - RED 2 5025156 4 WASHER 3/8" SAE 3 5061314 1 MU.
Engine & PTO Gr oup - Kaw asaki 26 HP Liquid Cooled NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 28 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kaw asaki 26 HP Liquid Cooled Footn ote s 42 - 1 SPRING CLIP, KAWI # 92144-2346 (Not illustrated) 43 - 1 SCREEN, BOTTOM, KAWI # 11053-2104-9H.
Engine & PTO Gr oup - Kawasaki 37 HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kawasaki 37 HP Footn ote s 1 5023233 1 CLUTCH,#526105,ELECTRIC, GT3.5-F E05 2 5042945 1 SPACER, 1.13 X 2.00 X .19 3 5043636 1 CLUTCH ANCHOR PAD 4 5045475 1 SPACER, .45 X 1.88 X .38 5 5050407X8 1 KEY, 1/4" SQ.
Engine & PTO Gr oup - Kawasaki 37 HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine & PTO Gr oup - Kawasaki 37 HP Footn ote s 42 5102126X3 1 AIR FILTER, PRIMARY (S/N: 2013855140 & Above) 43 5102126X4 1 AIR FILTER, SECONDARY (S/N: 201385.
Pump Drive Group (S/N: 2014192366 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 34 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Pump Drive Group (S/N: 2014192366 & Below) Footn ote s 1 5025394 4 NUT, 3/8 - 16 HEX NYLOCK FLANGE 2 5022586 2 PULLEY, PUMP DRIVE 3 5023254 2 KEY, 5MM SQ. W/ RADIUS 4 5022587 2 PULLEY, TAPERED HUB 5 5025010X8 4 BOLT, 1/4-20 X 1", GD5 6 5046446 1 SPACER, .
Motion Control Group - Lower NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Motion Control Group - Lower Footn ote s 1 5025354 4 NUT, M8-1.25 Hex Nylon Lock (S/N: 2012617338 & BELOW) 2 5025155 2 WASHER, 5/16" SAE 3 5025057 2 NUT 5/16-18 HEX NYLON LOCK 4 5025011X9 2 BOLT, 5/16-18 X 1-1/8" GD5 5 5025035 2 NUT, HEX 3/8-24 6 5025355 4 NUT, M8-1.
Motion Control Group - Upper NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Motion Control Group - Upper Footn ote s 1 5400984B 1 WELD, MOTION CONT . HANDLE-LH-3000 - RED (Includes Ref. No 3.) 1 5400985B 1 WELD, MOTION CONT .
Hydraulic Group (S/N: 2013257171 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 40 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Hydraulic Group (S/N: 2013257171 & Below) Footn ote s 1 5021164 8 CLAMP, #10 HOSE STAINLESS 2 5023268 4 CLAMP, HOSE 3 5021356 1 FILTER HEAD 4 5021357X1 1 FILTER, H.
Hydraulic Group (S/N: 2013257172 & Above) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 42 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Hydraulic Group (S/N: 2013257172 & Above) Footn ote s 1 5021164 8 CLAMP, #10 HOSE STAINLESS 2 5023268 4 CLAMP, HOSE 3 5021356 1 FILTER HEAD 4 5021357X1 1 FILTER, H.
Reservoir Mount & Battery Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Reservoir Mount & Battery Group Footn ote s 1 5025154 3 WASHER, 1/4" SAE 2 5025010X6 1 BOLT, 1/4-20 X 3/4" GD5 YZ 3 5025391 1 NUT, 1/4-20 HEX NYLOCK FLANGE 4 5025139 2 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 5 5025430 1 CLAMP, 5/16", DOUBLE, WIRE & TUBE 6 5023173 1 CLAMP, HOSE, 1.
Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Parking Brake Group Footn ote s 1 5025301 4 NUT, 1/2-13 HEX JAM 2 5025056 4 NUT, 1/2-13 HEX NYLON LOCK 3 5025017X32 4 BOLT, 1/2-13 X 4" GD5 YZ 4 5025033 2 NUT, 5/16-24 HEX 5 5025155 4 WASHER, 5/16" SAE 6 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 7 5022361 2 SPRING, BRAKE 8 5041930 2 SPACER, .
Rear Suspension Group - (S/N: 2012803266 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 48 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Rear Suspension Group - (S/N: 2012803266 & Below) Footn ote s 1 5025394 4 NUT, 3/8-16 HEX NYLOCK FLANGE 2 5025056 8 NUT, 1/2-13 HEX NYLON LOCK 3 5025017X22 8 BOLT,.
Rear Suspension Group - (S/N: 2012803267 & Above) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 50 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Rear Suspension Group - (S/N: 2012803267 & Above) Footn ote s 1 5025394 4 NUT, 3/8-16 HEX NYLOCK FLANGE 2 5025098 4 NUT, 1/2-20 HEX NYLON LOCK 3 5025017X22 4 BOLT,.
Deck Lift Group (S/N: 2000729893 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 52 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Deck Lift Group (S/N: 2000729893 & Below) Footn ote s 1 5025293 4 WASHER, 3/8" GD.9 FLAT 2 5025156 6 WASHER, 3/8" SAE 3 5025155 2 WASHER, 5/16" SAE 4 5025013X10 6 BOLT, 3/8-16 X 1-1/4" GD5 5 5025394 9 NUT, 3/8-16 HEX NYLOCK FLANGE 6 5025326 2 WASHER, 2.
Deck Lift Group (S/N: 2000729893 & Below) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 54 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Deck Lift Group (S/N: 2000729893 & Below) Footn ote s 41 5061569B 1 PEDAL, FOOT 42 5400479B 1 WELD, DECK LIFT SHAFT 3000 - RED 43 5025441 1 EYEBOLT, 3/8-16 X 2 1/2" 44 5025128 1 NUT, 3/8-16 HEX SERRATED FLANGE 45 5023343 4 BUSHING, 1.
Deck Lift Group (S/N: 2000729894 & Above) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 56 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Deck Lift Group (S/N: 2000729894 & Above) Footn ote s 1 5025293 4 WASHER, 3/8" GD.9 FLAT 2 5025156 6 WASHER, 3/8" SAE 3 5025155 2 WASHER, 5/16" SAE 4 5025013X10 6 BOLT, 3/8-16 X 1-1/4" GD5 5 5025394 9 NUT, 3/8-16 HEX NYLOCK FLANGE 6 5025326 2 WASHER, 2.
Deck Lift Group (S/N: 2000729894 & Above) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 58 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. Deck Lift Group (S/N: 2000729894 & Above) Footn ote s 41 5061569B 1 PEDAL, FOOT 42 5400479B 1 WELD, DECK LIFT SHAFT 3000 - RED (S/N: 2000729894 - 2013102109) 43 5025441 1 EYEBOLT, 3/8-16 X 2 1/2" 44 5025128 1 NUT, 3/8-16 HEX SERRATED FLANGE 45 5023343 4 BUSHING, 1.
Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Wheel & Tire Group Footn ote s 1 5023136 2 TIRE ASSY, 13 X 6.5 SILVER (Includes Ref No. 2 - 5 & 14) 2 5022577 2 TIRE, FRONT, 13 x 6.5 x 6 3 5023136X1 2 WHEEL ASSEMBLY, for 13 x 6.5 x 6 Tires, Complete (Includes Ref No.
Decal Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Decal Group - Brand & Model Footn ote s 1 5100345 1 DECAL, FERRIS, F RONT, 7.25 X 3.50 2 5100498 1 DECAL, BADGE, IS3100Z, LH 3 5100499 1 DECAL, BADGE, IS3100Z, RH 4 5400009 1 DECAL, FERRIS TEXT (2006 Kawasaki and Briggs & Stratton models only.
Decal Group - Safety & Operation NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Decal Group - Safety & Operation Footn ote s 1 5100097 1 DECAL, MAIN SAFET Y 2 5101292 1 DECAL, DANGER, MOWE R DIS CHARGE,8.
61" & 72" Mower Deck - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 66 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 61" & 72" Mower Deck - Hanger Chains Footn ote s 1 5025096 12 NUT, 3/8-16 HEX NYLON LOCK 2 5025084 4 NUT, 3/8-16 HEX JAM 3 5025156 12 WASHER, 3/8" S.
61" Mower Deck - Ho using, Covers, Spindles & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 68 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 61" Mower Deck - Ho using, Covers, Spindles & Blades Footn ote s 1 5600086 1 61" RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No.
61" Mower Deck - Pulleys, Belt & Idler Ar m NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 70 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 61" Mower Deck - Pulleys, Belt & Idler Ar m Footn ote s 1 5022061 1 BELT, #7-4918 2 5025017X36 1 BOLT, 1/2-13 X 4-1/2" GD5 3 5025150 2 WASHER, 1/2" USS 4 5045022 1 SPACER, .
61" Mower Deck - Rollers & Casters NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 61" Mower Deck - Rollers & Casters Footn ote s 1 5020785 1 ROLLER, DECK 2 5041655B 1 WELD, BRACKET, ROLLER PIN 3 5025128 5 NUT, 3/8-16 HEX SERRATED FLANGE 4 5025013X8 2 BOLT, 3/8-16 X 1" GD5 YZ 5 5020655 2 PIN, LYNCH, 7/16 6 5041476 6 SPACER, 1.
61" Mower Deck - Rear Mount Bars NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 61" Mower Deck - Rear Mount Bars Footn ote s 1 5045009 2 DECK PUSHER BAR, Complete (Includes Ref No. 13) 2 5020095 2 GREASE FITTING, 1/4-28 STRAIGHT 3 5025093 2 N.
72" Mower Deck - Ho using, Covers, Spindles & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 76 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 72" Mower Deck - Ho using, Covers, Spindles & Blades Footn ote s 1 5600086 1 61" / 72" RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No.
72" Mower Deck - Pulleys, Belt & Idler Ar m NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 78 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 72" Mower Deck - Pulleys, Belt & Idler Ar m Footn ote s 1 5045023 3 SPACER, .52 X 1.00 X .44 2 5600184 4 KIT, PULLEY & SHIELD (Includes Part Nos 5021976 & 5101103) 3 5045019B 1 WELD, IDLER ARM - RED 4 5025396 5 NUT, 1/2-13 HEX NYLOCK FLANGE 5 5025128 1 NUT, 3/8-16 HEX LG.
72" Mower Deck - Rollers & Casters NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 72" Mower Deck - Rollers & Casters Footn ote s 1 5020785 1 ROLLER, DECK 2 5041655B 1 WELD, BRACKET, ROLLER PIN - RED 3 5025394 5 NUT, 3/8-16 HEX NYLOCK FLANGE 4 5025013X8 6 BOLT, 3/8-16 X 1" GD5 YZ 5 5020655 2 PIN, LYNCH, 7/16 6 5041476 6 SPACER, 1.
72" Mower Deck - Rear Mount Bars NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 72" Mower Deck - Rear Mount Bars Footn ote s 1 5045009 2 DECK PUSHER BAR (Includes Qty. (4) of Ref. 13.) 2 5020095 2 GREASE FITTING, 1/4-28 STRAIGHT 3 5025093 2 N.
61" & 72" Mower Decks - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group ap plies to the following Mfg. Nos.: 2010 84 © Copyright Briggs and Stratton. All Rights Reserve d.
PART NO. DESCRIPTION REF NO QTY. 61" & 72" Mower Decks - Hanger Chains Footn ote s 1 5025096 12 NUT, 3/8-16 HEX NYLON LOCK 2 5025084 4 NUT, 3/8-16 HEX JAM 3 5025156 12 WASHER, 3/8" .
Electrical Schematic - Chargi ng Circuit - Kawasaki 26HP LC 282eswc0 The above parts group ap plies to the following Mfg. Nos.: 2010 86 © Copyright Briggs and Stratton.
Electrical Schematic - Cranki ng Circuit - K awasaki 26HP LC 282eswr0 The above parts group ap plies to the following Mfg. Nos.: 2010 87 © Copyright Briggs and Stratton.
Electrical Schematic - Ignition Grounding Circ ui t/Operator Presence - Kawasaki 26HP LC 282eswi0 The above parts group ap plies to the following Mfg. Nos.
Electrical Schematic - PTO Clut ch Circuit - Kawasaki 26HP LC 282eswp0 The above parts group ap plies to the following Mfg. Nos.: 2010 89 © Copyright Briggs and Stratton.
Electrical Schematic - Char ging Circuit - Kohler 30HP 282eskc0 The above parts group ap plies to the following Mfg. Nos.: 2010 90 © Copyright Briggs and Stratton.
Electrical Schematic - Cran king Circuit - Kohler 30HP 282eskr0 The above parts group ap plies to the following Mfg. Nos.: 2010 91 © Copyright Briggs and Stratton.
Electrical Schematic - Ignition Grounding Ci r cuit/Operator Presence - Kohler 30HP 282eski0 The above parts group ap plies to the following Mfg. Nos.: 2010 92 © Copyright Briggs and Stratton.
Electrical Schematic - PTO Cl utch Circuit - Kohler 30HP 282eskp0 The above parts group ap plies to the following Mfg. Nos.: 2010 93 © Copyright Briggs and Stratton.
Electrical Schematic - Charging Circui t - Brigg s & Stratton 30HP & 32HP 282esbc0 The above parts group ap plies to the following Mfg. Nos.: 2010 94 © Copyright Briggs and Stratton.
Electrical Schematic - Cranking Circui t - B riggs & Stratton 30HP & 32HP 282esbr0 The above parts group ap plies to the following Mfg. Nos.: 2010 95 © Copyright Briggs and Stratton.
Electrical Schematic - Ignition Grounding Circui t/Operator Presence - Briggs & Stratto n 30HP & 32HP 282esbi0 The above parts group ap plies to the following Mfg.
Electrical Schematic - PTO Clutch Ci rcuit - Briggs & Stratton 30HP & 32HP 282esbp0 The above parts group ap plies to the following Mfg. Nos.: 2010 97 © Copyright Briggs and Stratton.
Electrical Schematic - Char ging Circuit - Kawasaki 37HP 5301292C The above parts group ap plies to the following Mfg. Nos.: 2010 98 © Copyright Briggs and Stratton.
Electrical Schematic - Cranki ng Circuit - K awasaki 37HP 5301292R The above parts group ap plies to the following Mfg. Nos.: 2010 99 © Copyright Briggs and Stratton.
Electrical Schematic - Ignition Groundin g/Operator Presence - Kawasaki 37HP 5301292I The above parts group ap plies to the following Mfg. Nos.: 2010 100 © Copyright Briggs and Stratton.
Electrical Schematic - PTO Clut ch Circuit - Kawasaki 37HP 5301292P The above parts group ap plies to the following Mfg. Nos.: 2010 101 © Copyright Briggs and Stratton.
Not for Reproduction.
T or que Specification Char t FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
www.ferrisindustries.com © Copyright Briggs and Stratton Corporation All Rights Reserved. Printed In USA. 2010 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 Briggs and Stratton Ya rd P.
Ein wichtiger Punkt beim Kauf des Geräts Ferris Industries is3100z series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Ferris Industries is3100z series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Ferris Industries is3100z series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Ferris Industries is3100z series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Ferris Industries is3100z series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Ferris Industries is3100z series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Ferris Industries is3100z series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Ferris Industries is3100z series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Ferris Industries is3100z series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
