Benutzeranleitung / Produktwartung 1800 des Produzenten FARGO electronic
Zur Seite of 23
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. GSM GPRS Modem 900 / 1800 V alue Added Feature USER MANUAL.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. Revision history Rev . Date Details Originated by 0.9 22July 2005 First release W allace Lee 0.91 22Feb 2006 - Remove A T command history feature - Remote A T command : when enabled all incoming SMS will be erased W allace Lee 0.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 1 ERAL T able of contents 1. INTRODUCTION ................................................................................................................. ..
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 2 1. INTRODUCTION The Fargo Maestro V alue-Added Feature package is a software solution for Fargo Maestro modem (*see note 1).
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 3 Then enter the following and see the respons es according to the following table: Command Expected response A T#VVERSION #VERSION: "eDsoft-W302_V2.10 1 16686 Dec 10 2003 12:20:17" A T+WOPEN=2 +WOPEN: 2,"A T v02.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 4 e. When you see the dialog box, on the “Filenam e” you choose file according to the modem: Fargo Maestro 20 : F100V AF _0092.dwl Fargo Maestro 100 : F20V AF_0092.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 5 3. AUTO TCP/UDP CONNECTION (Fargo Maestro 100 only) The Auto TCP/UDP connection feature is defined for accessing serial devices over the Internet.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 6 3.2 A T commands for Auto TCP/UDP 3.2.1 A T+AUTOTCP Description: This command controls the Maestro 100 to start TCP socket connection automatically .
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 7 - If the TCP connection is broken the modem will try to reconnect automatically . During re- connection period serial port will go back to command mode, and DSR/DCD signal back to low .
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 8 <mode> Mode of TCP operation. Default value is “S”. “S” Server (Listening) mode. This confi gures Fargo Maestro to open a listening TCP connection on the specified port .
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 9 Command Possible responses: A T+AUTOUDP=0 OK Note : disable AutoUDP A T+AUTOUDP=1 OK Note: Enable AutoUDP.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 10 Command Possible responses: A T+ IPUDP? +IPUDP: 0,"S","",100 OK Note : show current settings A T+ IPUDP =23 OK Note: set the UDP port to 23 A T+ IPUDP =23,”C”,202.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 11 3.2.5 A T+IPGPRS Description: This command is used to setup GPRS network parameters for the AutoTCPUDP feature.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 12 3.2.6 A T+IPBUFF Description: This command specifies the number of bytes of data from remote peer buf fered inside the modem. - If the quantity of buffered data reach this value, the whole buf fered data will be sent out to the serial port.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 13 Defined V alues : <buff> The number of bytes of data to be buffered. Default value is 0 (i.e. no buf fering). V alid range is 0 to 50. Notes: - If the TCP or UDP socket connecti on is broken, buf fered data will be lost.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 14 4. REMOTE AT COMMAND BY SMS This feature is to control the modem to interpret A T command fr om incoming SMS, executing it, and return the result to sender by SMS.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 15 4.2 A T command for configur ing A T command by SMS 4.2.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 16 4. It could be in some case (e.g. network fa ilure) the modem cannot return response SMS. The modem will try sending response SMS for three times max. If still not successful it will abort.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 17 5. I/O TRIGGERED AT COMMAND This feature making use of the Fa rgo Maestro Input/Output port as a sensor . If the signal to the port match the pre-defined condition a stored A T command will be executed .
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 18 When set as high-to-low triggering : * See A T+IOA T command on setting Threshold value T .
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 19 <Threshold> T ime required for the detected state to trigger the A T comm and exestuation. Unit is in millisecond. V alid value from 1 to 50 (0.1 sec to 5 sec).
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 20 6. KNOWN ISSUES The Fargo Maestro V alue Added F eature will affect certain other A T commands’ operation. Pleas e note : 6.1 A T+WIND command 1. A T+WIND command will be disabled (Fargo Maestro 100 only) 6.
Confidential, the whole present docum ent is the sole property of Fargo T elecom (Asia) Ltd. 21 7. QUESTIONS AND ANSWERS 7.1 Installation Q. If my Fargo Maestro cannot matc h with the requirement stated in section 2.1, can I upgrade it? A. No. Older Fargo Maestro cannot be upgraded.
Ein wichtiger Punkt beim Kauf des Geräts FARGO electronic 1800 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie FARGO electronic 1800 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für FARGO electronic 1800 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von FARGO electronic 1800 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über FARGO electronic 1800 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon FARGO electronic 1800 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von FARGO electronic 1800 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit FARGO electronic 1800. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei FARGO electronic 1800 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
