Benutzeranleitung / Produktwartung TID-725N des Produzenten Farenheit
Zur Seite of 45
Operating Manual 7” W ide T ouch Scr een EXACT Double-Din In-Dash Moto rized TFT Monitor/DVD /AM/ FM.
- 1 - T ABLE OF CONTENTS Safety Information ….…………………………………………………………………….2 Features …………………………… ……………………………… ……………………...3 Accessories………………………… …………………………………………………….
- 2 - SAFETY INFORMA TION Please read the manual carefully before operating this unit and keep it for future reference. CAUTION: This unit is a class 1 laser product. T o prevent direct exposure to the laser system, do not open the unit. The laser beam may hurt your eyes.
- 3 - FEA TURES - Fully Motorized 4 Position Drop Screen With Last Angle Memory - (Optional) Navigation Black Box Module With Navteq Maps Of North America - Electronic T ouch Screen Functions Include .
- 4 - ACCESSORIES Bolt S teel Bar x 1 M5X5 Screws x 8 Connecter Wire x 1 Remote Control x 1 Keys x 2 Operational Manual x 1 Mounting Sleeve x 1 USB Cable x 1 iPod Cable x 1 (option) 1 2 3 4 5 6 7 8 9 .
- 5 - UNIT INST ALLA TI ON Install the Mounting sleeve into the dashboard . Install the unit into the mounting sleeve..
- 6 - 1, connect the power cable with unit. 2, press the [P .ANGLE] button to slide down the front p anel. 3, turn over the unit, loose the screws. 4, press the [P .ANGLE] button to close the front panel. NOTE Screws are useful to protection during shipment.
- 7 - UNIT REMOV AL Insert the keys supplied with the unit on both sides (as il lustrated) as this will release the internal locks so you can slide the unit out.
- 8 - WIRE CONNECTION.
- 9 - NOTE: Brake Control It is necessary to connect the Brake Control wire to the Hand-brake switch of the car. While driving, the TFT monitor will display the alarm picture (see as follows) in ord er to ensure the safety. Under the Rear View Mode, the Brake Control function is no effective.
- 10 - FRONT P ANEL 换新的丝印图，编号 123….. 不变 1. MINI USB 5. RESET 9. MENU 2. P. A N G L E 6. MIC 10. POWER / SOURCE 3. VOLUME - 7. REMOTE 11 . A V IN 2 4. VOLUME + 8. MUTE NOTE ： MIC is not effective for this unit, it is a common panel for Bluetooth function models.
- 1 1 - 12. EJECT 13. SD CARD SLOT 1. MINI USB The unit will be switched to DVD Mode autom atically when USB connected, and play the songs, pictures, videos in USB.
- 12 - 5. [RESET] Press the button to switch back to all the original factory sett ings. Keep in mind this will erase all your preset radio stations and any EQ settings you may have made and saved. 7. REMOTE Infrared Remote Receiver 8. [MUTE] Press the button to switch off the sound; press it again to resume to the previous volume level.
- 13 - REAR P ANEL 14. RADIO ANTENNA, IPOD MINI DIN & IR REPEA TER ADAPTER 15. CDC ADAPTER 16 .16PIN SOCKET 17. VIDEO AUDIO OUTPUT & INPUT.
- 14 - REMOTE CONTROL 待换新遥控器 1. POWER / SOURCE 13. F .FWD 25. SUBTITLE 2. MUTE 14. SLOW 26. PREVIOUS 3. NUMBER BUTTONS 15. RANDOM 27. RIGHT 4. MENU 16. ZOOM 28. NEXT 5. AUDIO 17. SYSTEM 29. ANGLE 6. DISPLA Y 18. OPEN / CLOSE 30. PLA Y / P AUSE 7.
- 15 - 1. [POWER/SOURCE] Same functions as key on front panel. 2. [MUTE] Press the [MUTE] button to switch off the sound; press it again to resu me to the previous volume level. 3. [NUMBERS 0~9] For 1~6, press these buttons to store the current radio station or recall the stored station under the Radio Mode.
- 16 - 14. [SLOW] Press to activate slow motion playback. (DVD Mode only) 15. [RANDOM] Press to turn RAMDOM function on / off when playing CD / VCD disc (PBC OFF). 16. [ZOOM] Press to magnify the picture display when play DVD, VCD disc. 17. [SYSTEM] Press to enter / exit the System Parameter Setup menu.
- 17 - 33. [REPEAT] Press to select the chapter / title / disc to repeat playing. 34. [P/N] Press the button to switch the video output (PAL/NTSC) when playing DVD disc.
- 18 - T OUCH SCREEN OPERA TIONS TOUCH SCREEN CALIBRA TE When “Power Off”, press the buttons 1, 2, 3, 4, 5, [BAND] of remote control to enter the CALIBRA TE page: T o touch the points from 1 to 5 until the point s change to brighter by using a ballpoint pen or pencil .
- 19 - MAIN MENU T ouch the icon “MORE” to enter the 2 nd page of main menu:.
- 20 - RADIO OPERA TIONS T ouch the icon “RADIO” to enter the 1st operation p age of RADIO Mode: 1~6. STORED CHANNEL Manual Store Radio Station Hold on touching the icon, you can store current radio frequency to the stored channel. For example, the current frequency is 98.
- 21 - 1 1. NEXT P AGE T ouch the icon to enter the 2 nd page of RADIO Mode: 1 . DOWN / 2 . UP Touch the icons to adjust the frequency downward / upward by step decreasing / increasing. Hold on touching the icons has same function with [SEEK-] / [SEEK+].
- 22 - 1. ASM Seeking and store the stations 1. Hold on touching the icon to seek stations with t he strongest signal from the lowest frequency point in the entire wave bands; press any button to stop seeking. After seeking, the former stored stations will be instead.
- 23 - DVD OPERA TIONS T ouch the icon “DVD” to enter the DVD Mode if disc inside. The unit will switch to DVD Mode automatically if loading disc. The unit will switch to RADIO Mode automatically if ejecting disc. 1. PREV / 2. NEXT T ouch the icon to go to the pervious / next chapter , track or song.
- 24 - 8. NEXT P AGE T ouch the icon to enter the 2 nd page of DVD Mode: 1~4. DOWN / UP / LEFT / RIGHT T ouch the direction icons (UP / DOWN / LEFT / RIGHT) to move the cursor to the selected item. T o press the direction buttons (UP / DOWN / LEFT / RIGHT arrow) of remote control performs same operation.
- 25 - USB OPERA TIONS T ouch the icon “USB” to enter the USB Mode if USB connected. The unit will switch to USB Mode automatically if connecting USB. When disconnecting USB, the unit will switch to RADIO Mode automatically if there is no disc in the unit; and the unit will switch to DVD Mode automatically if there is a disc inside.
- 26 - IPOD OPERA TIONS T ouch the icon “IPOD” to enter the IPOD Mode if iPod connected. The unit will switch to IPOD Mode automatically if connecting iPod. The unit will switch to RADIO Mode automatically if disconnecting iPod. NOTE: It is available for iPod operations with an additional iPod cable which is optional accessory .
- 27 - 12. VIDEO T ouch the icon to switch to the VIDEO operation. 13. MENU T ouch the icon to return the main menu. 14. EXIT T ouch the icon to exit the T OUCH ICONS display . Video Operation 1. MUTE T ouch the icon to switch off the sound; touch it a gain to resume to the previous volume level.
- 28 - A V IN OPERA TIONS T ouch the icon “A V IN” to enter the A V IN Mode: 1. MUTE T ouch the icon to switch off the sound; touch it a gain to resume to the previous volume level. 2. EQ The user can set to adjust the audio output to your preference: USER – POP – CLASSIC – ROCK – JAZZ – USER 3.
- 29 - 1. MUTE T ouch the icon to switch off the sound; touch it a gain to resume to the previous volume level. 2. EQ The user can set to adjust the audio output to your preference: USER – POP – CLASSIC – ROCK – JAZZ – USER 3. MENU T ouch the icon to return the main menu.
- 30 - CDC OPERA TIONS T ouch the icon “CDC” to enter the CDC Mode if CD/DVD changer connected: 1. The playing DISC number 2. D-DOWN / 3. D-UP T ouch the icon to change the next / previous disc to play . 4. PREV / 5. NEXT T ouch the icon to go to the pervious / next chapter , track or song.
- 31 - NOTE: T ouch the “CDC” icon to enter the following page if the CD/DVD changer not connected. 1, INFORMA TION It indicates that the unit does not connect the CD/DVD changer .
- 32 - SYSTEM SETUP T ouch the icon “SETUP” or press the [SYSTEM] button of panel to enter the SETUP of system parameters: 1. SYSTEM SETUP 2. VIDEO SETUP 3. AUDIO SETUP 4. MORE AUDIO SETUP 5. CLOCK SETUP T ouch the icon 1~5to select the main menus directly .
- 33 - SYSTEM SETUP RADIO AREA: USA – JAP AN – OIR T – EUROPE – ASIA – USA DEF AUL T : the unit will restore all default settings of Sound Parameter , Picture Parameter & T uner Parameter .
- 34 - AUDIO SETUP BASS: - 15 ~ + 15 TREBLE: - 15 ~ + 15 BALANCE: L 15 ~ R 15 F ADER: F 15 ~ R 15 MORE AUDIO SETUP SUB-WOOFER FRQ: 80HZ – 120HZ – 160HZ – OFF – 80HZ SUB-WOOFER VOL: 0 ~ 15.
- 35 - CLOCK SETUP CLOCK: 12H / 24H DISPLA Y : ON / OFF HOUR: 00 ~ 23 MINUTE: 00 ~ 59.
- 36 - DVD SETUP MENU SETUP MENU OPERA TION Press the [SETUP] button of remote control to enter the DVD SETUP Menu. Press the [<] / [>] buttons to switch the main menus as following: SYSTEM – LANGUAGE – AUDIO – VIDEO – SPEAKER – DIGIT AL Press the [ ∧ ] / [ ∨ ] buttons to enter the submenus from main menus.
- 37 - VIDEO Following options are available for the TV Display: INTERLACE-YUV TV -RGB P-SCAN YPBPR S-VIDEO TV TYPE Following options are available for the TV Display: 4 : 3 PS 4 : 3 LB 16 : 9 PA S S W O R D Setup the password for Parent al Ratings change.
- 38 - SUBTITLE LANGUAG E Following options are available for the SUBTITLE LANGUAGE: ENGLISH GERMA N SP ANISH FRENCH PORTUGUESE IT ALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARI AN.
- 39 - VIDEO SETUP BRIGHTNESS Following options are available for the BRIGHTNESS: 0 2 4 6 8 10 12 CONTRAST Following options are available for the CONTRAST : 0 2 4 6 8 10 12 HUE Following options are .
- 40 - DOWNMIX Following options are available for the DOWNMIX : L T / RT S tereo VSS BASS MODE Following options are available for the BASS MODE: ALL LG SP K ALL SM SP K MIXED SPK DIGIT AL SETUP OP M.
- 41 - TROUBLE SHOOTING If any of problem persists after checking the below list, Please consult your nearest service dealer. Never attempt to disassemble and repair unit personally .
- 42 - Problem Cause Corrective Action VCD Cannot insert disc Disc already inside unit Eject current disc and insert new one Disc does not play back Disc is warped or scratched Disc is dirty or wet In.
- 43 - SPECIFICATIONS GENERAL Supply Voltage : 14.4 V DC (10.8-16 V DC Allowable) Load Impedance : 4 Ω Max Power Output : 50 W x 4 Bass 100Hz : ≥ 10dB T reble 10KHz : ≥ 10dB Dimension (approx) : 187 x 188 x 110 mm (d/w/h) Mounting (approx) : 160 x 178 x 100 mm (d/w/h) FM TUNER Frequency Range : 87.
- 44 - DISC NOTES ■ Disc formats supported by this player Handling and Cleaning ● Dirty, dusty, scratched or warped discs will cause misoperation. ● Do not place stickers or make scratches on discs. ● Do not warp discs. ● A disc should always be kept in its case when not in use to prevent from damage.
Ein wichtiger Punkt beim Kauf des Geräts Farenheit TID-725N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Farenheit TID-725N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Farenheit TID-725N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Farenheit TID-725N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Farenheit TID-725N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Farenheit TID-725N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Farenheit TID-725N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Farenheit TID-725N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Farenheit TID-725N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
