Benutzeranleitung / Produktwartung GAMETIMETM 750GT-2 des Produzenten Excalibur
Zur Seite of 28
GameTime ™ II INSTRUCTION GUIDE Model 750GT-2.
2 CONGRATULATIONS! The GameTime™, manufactured and designed by Excalibur Electronics, is the best timekeeper for any activity where time is critical in two-player games. It offers a wide variety of preset game options that cover just about every situa - tion you can think of.
TABLE OF CONTENTS 1. Quick Start How about a nice game of Chess? 5 How about a nice crossword game? 6 How about a nice game of Go? 7 2. Introduction Getting acquainted with GameTime™ 8 3. Preset Time Controls The only options you may ever need 12 4.
OK, now that the batteries are in…. The unit will beep when batteries are installed. If it does not beep, please use a pointed object and press the ACL button recessed on the bottom of the unit.
rect the problem, check battery installation. Numbers will appear on the display panel, if they don’t, adjust the brightness control wheel (see diagram, facing page).
7. Slide the PAUSE/PLAY switch PLAY. 8. Black now presses his plunger to start your “White’s clock. This is very impor - tant. Every move, including White’s first, must be counted! (Your clock’s move counter relies on this rule.
front of the time to indicate it is displaying overtime time. Generally, word game tournaments allow 25 minutes per player. This corresponds to PRESET 14 . You need not worry about the DELAY feature, since selecting WORD mode will eliminate the Chess DELAY feature.
Follow this procedure to set your clock for a Go tournament game: 1. Level GameTime’s™ PLUNGERS . 2. Slide the PAUSE/PLAY switch to PAUSE . 3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on.
don’t, adjust the brightness control wheel (see diagram on page 4). Once over quickly Let’s take a quick look at the GameTime’s™ controls, shown on page 4. When you’re playing a game, the display panel shows the time remaining for each player, the number of moves made so far, and similar details.
3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on. 4. Set which player moves first by pressing the WHITE button. Use the + button to switch which side the word FIRST appears in the display.
for example, a tournament director or referee must subtract time from a player’s clock as the result of a penalty.) 1. Slide the PAUSE/PLAY switch to PAUSE . 2. Press SELECT to display the time remaining. You can first adjust the number of seconds remaining for the clock on the left.
GameTime™ offers. Then dip into Chapter 4 for an explanation of the most common options you’ll want to set from day to day. Tackle Chapter 5 and 6 when you’re ready to start selecting your own time controls and want to learn more about the advanced options.
lasts no more than four hours – a three-hour playing session (90 minutes for each player), followed by a one-hour sudden-death session (30 minutes for each player).
CHAPTER 4. ADDITIONAL GAME OPTIONS Getting the most out of GameTime™ This chapter describes the many game options that make the GameTime™ a powerful tool for both casual and tournament games. Here’s what you can do: • Set a count-down delay. • Control how time forfeits are handled.
delay gives a player just enough time to make the routine moves that it would take to ensure a win in such a situation. At this writing, USCF’S rules call for a delay of two seconds for “Speed Chess” time controls up to, but not including G/10. For controls G/10 to G/29 (called “Quick Chess”), the delay is three seconds.
you cannot only save a game, you can play other games while the adjourned game remains in memory. You can keep only one game in memory at a time. Saving a game erases the previously saved game. Changing batteries also erases any saved game. To save a game in progress: 1.
GameTime™ continues to keep track of moves even when the counter is hidden. Ending a game after a specified number of moves GameTime™ can end a game after a specified number of moves. After the specified move number the clock will show a forfeit. 1.
2. Press the SELECT button until you see the word ACCUM on the display. 3. Use the + button to select On or OFF . 4. Press VERIFY or slide the PAUSE/PLAY switch to PLAY . Turning GameTime’s™ beep sound off The GameTime™ beeps when a player loses a game by failing to meet a time control.
To control the DELAY or ACCUM scope: 1. Slide the PAUSE/PLAY switch to PAUSE 2. Press SELECT until you see the words DELAY (or ACCUM) and ALL in the display. 3. Use the + button to SELECT On or OFF . SELECT On to apply the count-down delay (or bonus time) to any primary and secondary time controls you’ve set in addition to sudden-death.
1. Slide the PAUSE/PLAY switch to PAUSE . 2. Press the SELECT button until you see the word SECOND on the display. 3. Use the + button to select OFF or On . 4. Press VERIFY or slide the PAUSE/PLAY switch to PLAY . CHAPTER 5. CUSTOM TIME CONTROLS Setting your own time controls The GameTime’s™ presets offer the most common time controls.
left-hand clock for the PRIMARY time control. 5. Press SELECT and use the + and – buttons to enter the number of minutes on the left-hand clock. Holding the + or – buttons down will make the numbers change rapidly. 6. Press SELECT and use the + and – buttons to enter the number of seconds on the right-hand clock.
added to your opponent’s clock, and vice versa. Customizing Hour Glass time OR Cancelling Hour Glass Preset Once you have selected preset HG , and before you start your game by switching to PLAY mode, you can customize how much time you want to use for the Hour Glass preset.
However, unlike SUDDEN death in Chess, the game does not end when the main time control has ended. Instead when the player uses all of their time, the player enters an overtime time control. GameTime™ turns on a FLAG near the time of the player that enters overtime.
will turn on near their time indicating overtime. For the second time control (overtime), each player receives a number of stones equal to the move count for the second time control. You have a specified amount of time to play those stones. For example, preset 88 is G/30m 30/5m, which gives you 30 minutes of initial thinking time.
3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on. 4. Press the SELECT button to see the word PRESET on the display. 5. Use the + and – buttons to change the preset number to 14 .
26 NOTES.
27 APPENDIX A..
28 EXCALIBUR ELECTRONICS, INC., war - rants to the original consumer that its products are free from any electrical or mechanical defects for a period of ONE YEAR from the date of purchase. If any such defect is dis - covered within the warranty period, EXCAL - IBUR ELECTRONICS, INC.
Ein wichtiger Punkt beim Kauf des Geräts Excalibur GAMETIMETM 750GT-2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Excalibur GAMETIMETM 750GT-2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Excalibur GAMETIMETM 750GT-2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Excalibur GAMETIMETM 750GT-2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Excalibur GAMETIMETM 750GT-2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Excalibur GAMETIMETM 750GT-2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Excalibur GAMETIMETM 750GT-2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Excalibur GAMETIMETM 750GT-2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Excalibur GAMETIMETM 750GT-2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
