Benutzeranleitung / Produktwartung TP-S1 0 9DR des Produzenten EverFocus
Zur Seite of 57
INSTRUCTION MANUAL TP-S1016DR TP-S1 0 9DR Digital Video Recorder.
Safety Precautions CAUTION DO NOT REMOVE COVE R. NO USER SERVICEAB LE PARTS INSIDE. REFER SERVICING TO QUA LIFI ED SERVIC E PE RS ONNE L. WARNING TO REDUCE RIS K OF FIRE OR E LECTRIC SHOCK, DO NOT EXPOSE THIS APP LI ANCE TO RAIN OR MOISTURE .
Safety Precautions Safety Precautions Warning: Electrostatic-sensitive device. Use proper CMOS/MOSFET handing precautions to avoid electrostatic discharge. UNPACKING Unpack carefully. This is electronic equipment and should be handled carefully. Check to ensure that the following items are included; •1.
Important Safeguards Important Safeguards Read Instruction ---All the safety and operati ng instructio ns should be read before the init is operated Retain Instructions ---The safety and operating instructions shoul d be retained for future reference.
Table of Contents 1. Product Overv iew …………………………………….………… ……..…..…..Page 1 1.1 Main fe atures……………… …………………………………………… ……. ....…..….1 1.2 Specificatio ns…… ………… ……… ………… ……… ………… ………….
Product Overview 1. Product Overview The TP-S109DR/T P-S1016DR Duplex Di gital Video Recorder (DVR) a fu ll-featured DVR designed specifically for use in security indus try. The DVR inco rporates all the benefits of digital video reco rding, is simple to install, and operates just like a VCR.
Specifications 1.2 Specifications Video Input 9 (TP-S109DR ) / 16 (TP-SI016DR ) camera inputs ( BNC),1Vp-p/75oh m Video Compressio n M-JPEG 2 430mm (W) x 88mm (H) x 300 (D) Dimension AC100~240V Power Source 100W max.
Back Panel Connections 2. Back Panel Connections 1 2 4 3 5 10 12 13 9 11 6 7 8 ON/OFF: Main on/off switch. 1 2 AC100~240V power socket . 3 VIDEO IN: BNC-sockets for composite signa l video inputs, automatic 75 Ohm termination (TP- S109DR: 1 ~ 9, TP-S1016DR-1600 : 1 ~ 16).
Back Panel Connections 9 ALARM I/O: (Refer pin as signment in Appendi x-C, Page 44) ALM-INPUT : Normally Open (N .O) or Norma lly Close (N.C) type alarm sensor input. The Alarm Input can be selected as N.O or N.C input in the setup menu. When an alarm occurs, alarm recording w ill automatically start.
System Connection 3. System Connection The ins tallations descr ibed below should be made by qualified ser vice personnel or system installer s. Before Installation Please refer to the following diagram for the system connections.
Front Panel Keypads 4. Front Panel Keypads SHUTTLE : In Playback mode, turn the shuttle ring to fast forward/rew ind the picture (600X maximum). In Pause mode, turn the shu ttle dial to sl ow for ward/rewi nd the picture (1/32 maximu m). JOG : In Pause mode, turn the jog dia l to step for ward/rew ind the Pictur e.
Front Panel Keypads In Full screen mode this menu allo ws color adjustment for each video channel, all channels are separately adjus table. The selected item will sho w in red color bar. Use JOG to increase or decrease the value. Press ENTER to confirm and move to next item .
Operation 5. Operation (1) Insert a HDD (IDE) for Video Stor age Insert one or t wo HDD (3. 5” IDE) for Vi deo Storage. The HDD sho ul d b e set a s Ca ble S el ect . (Norma lly the default setting of HDD is Master ) Note: After hard disk case is inser ted into the hard disk tray, be s ure to tu rn the tra y key in lock position.
MENU flow 6. MENU FLOW Columns in brackets () only valid forT P-S1016DR CLOCK ( See page 11 ) : 2003/07/04 FRI : 13:01:02 CLOCK SETTING MENU DATE TIME MENU LANGUAGE: ENGLISH VIDEO S YSTEM: NT SC VERSION: 0.
MENU flow Columns in brackets () only valid forT P-S1016DR CH DWELL EVENT 1 0 7 SECS NONE 2 0 7 SECS NONE 3 0 7 SECS NONE 4 0 7 SECS NONE 5 0 7 SECS NONE 6 0 7 SECS NONE 7 0 7 SECS NONE 00 07 SECS NON.
MENU 6.1 CLOCK SETTING MENU CLOCK SETTING MENU DA TE TIME MENU LANGUAGE VIDEO SYSTEM : 2003/07/04 FRI : 13:01:02 : ENGLISH : NTSC VERSION: 0.79 11/23 In CLOCK/LANGU AG E S ETTING MENU , we define: (1).
MENU 6.2 TIMER SETTING MENU TIMER SETTING MENU WEEK START STOP SPEED SET SUN 00:00 23:59 50 IPS O FF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS OFF SUN 00:00 23:59 50 IPS O FF SUN 00:00 23:59 5.
MENU 6.3 SEQUENCE SETTING MENU SEQUENCE SETTING MENU CH OP DWELL 1 ON 03 SECS 2 ON 03 SECS 3 ON 03 SECS 4 ON 03 SECS 5 ON 03 SECS 6 ON 03 SECS 7 ON 03 SECS 8 ON 03 SECS 9 ON 03 SECS (10 ON 03 SECS) (1.
MENU 6.4 TITLE S ETTING MENU TITLE SETTING MENU CH TITLE 1 CH01:_ _ _ _ _ 2 CH02:_ _ _ _ _ 3 CH03:_ _ _ _ _ 4 CH04:_ _ _ _ _ 5 CH05:_ _ _ _ _ 6 CH06:_ _ _ _ _ 7 CH07:_ _ _ _ _ 8 CH08:_ _ _ _ _ (9 CH09.
MENU 6.5 COVERT SETTING MENU COVERT SETTING MENU CH OP 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF 9 OFF (10 OFF) (11 OFF) (12 OFF) (13 OFF) (14 OFF) (15 OFF) (16 OFF) Columns in brackets () only .
MENU 6.6 ALARM RECORD SETTING MENU ALARM S ETTING MENU CH OP TYPE DUR ATI ON 1 ON N.O 05 SECS 2 ON N.O 05 SECS 3 ON N.O 05 SECS 4 ON N.O 05 SECS 5 ON N.O 05 SECS 6 ON N.O 05 SECS 7 ON N.O 05 SECS 8 ON N.O 05 SECS 9 ON N.O 05 SECS (10 ON N.O 05 SECS) (12 ON N.
MENU 6.7 MOTION SETTING MENU MOTION SETTING MENU CH OP SEN DURATION 1 ON HIGH 05 SECS 2 ON HIGH 05 SECS 3 ON HIGH 05 SECS 4 ON HIGH 05 SECS 5 ON HIGH 05 SECS 6 ON HIGH 05 SECS 7 ON HIGH 05 SECS 8 ON H.
MENU (5) HIT 1-9/1 6 TO MANUAL EDIT: Use the numer ic keys (1 ~9 for TP-S109DR / 1~16 forTP-S1016DR) to select a camer a for setting the detection areas. The selected ca mera appears w ith a 16 x 12 gr id (detection zones): HIT ENTER TO SE LECT MODE USE JOG TO TOGGLE ON/O FF HIT MENU TO EXIT ENTER jumps to the ne xt detection field.
MENU 6.8 RECORD SETTING MENU RECORD SETTING MENU NORMAL RECORD SPEED QUALITY DISK FULL : 50 IPS : STANDARD : REWRITE ALARM RECORD OPERATION SPEED QUALITY ON : 50 IPS : STANDARD PRE-ALARM RECORD OPERATION ON In NORMAL RECORDING MENU, we define (1) NOR MAL RECORD: SPEED : To set the normal r ecording speed.
MENU 6.9 NETWORK SETTI NG MENU IP ADDRESS NET MASK ADDRESS GATEWAY ADDRESS MAC ADDRESS USER-NAME PASSWORD LEVEL NETWORK SETTING MENU : 192.168.010.005 : 255.
MENU 6.10 CONTROL SETTING MENU (1) RS232 BAUD RATE: There are 6 diffe rent speeds that can be used to transmit instruction or informat ion through the RS232 por t on the device, 1200 baud,2400 baud,4800 baud,9600 baud, 19200 baud,and 3840 baud. The default setting from the factory is 9600 baud.
MENU 6.11 BUZZER SETTING MENU BUZZER SETTING MENU BUZZER : ENABLE RECORD-IN : ON ALARM-IN : ON MOTION-IN : ON DISK FULL : ON VIDEO LOSS : ON TIMER : ON In BUZZER SETTING MENU , we define the bu zzer O.
MENU 6.12 ARCHIVE SETTING MENU PICTURE SIZE TIME STAMP TIME STAMP PO S WATER MARK WATER MARK POS ARCHIVE SETTING MENU : 720 X 480 : ON : TOP : ON : TOP In the ARCHIVE SETTI NG MENU, we defin e for pic.
MENU 6.13 MATRIX SETTING MENU CH DWELL EVENT 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE 00 07 SECS NONE MONITOR-0 S.
6.14 DISK DISK SETTING MENU DISK USAGE HDD-1 HDD-2 SIZE ( GB ) : 80 80 RECORD POS : *0.0% 0.0% PLAY POS : *0.0% 0.0% DISK RENEW : NO DISK COPY : NO In the DISK SETTING MENU ， we d e f i n e (1) DISK.
MENU 6.15 SYSTEM SETTING MENU SYSTEM SETTING MENU PLAY WITH AUDIO-1 : O N PLAY WITH AUDIO-2 : O N PLAY SPEED : 50 PIS PASSWORD ENABLE : DISABLE PASSWORD LEVEL-2 : 222222 PASSWORD LEVEL-3 : 333333 MULT.
Recording 7.1 INSTANT RECORDING REC Press REC key to start continuous record ing wi th setting of “NORMAL RECORD”. The recording ra te and recording quality are set in the RECOR D SETTING MENU .
Playing Back 8.1 NORMAL PLAYBACK (1) Play bac k Press the PLAY key to start playing back the stored image/audio from the last SEGMENT. PLAY NOTE: In Duplex mode (simu ltaneous record and playback) the playback speed is limited to 25 IPS. For real time display of 50 IPS records stop recording befo re starting playback.
Search Playback 8.2 SEARCH PLAYBACK (1) Se gment Li st search pla yback SEARCH Press SEARCH key to enter the SEARCH MEN U dialog. SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to selec t BY SEGMENT LIST and p ress ENTER key.
Search Playback (2) A larm List search playback SEARCH Press SEARCH key to enter the SEARCH MEN U dialog. SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY A LARM LI ST a nd press ENTER key.
Search Playback (3) Date/T ime Search Playback SEARCH Press SEARCH key to enter the SEARCH MEN U dialog. SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY DATA TIME and press ENTER key.
DATA EXPORT 9. DATA EXPORT Insert a Compact F lash card into the Compact F lash slot on the front panel of DVR. When inserting the Compac t Flash card, make sure that inser t direction is corre ct. NOTE: COPY function is not possible du ring RECORD . Stop recording to enable COPY function! 9.
DATA EXPORT 9.2 COPY TO MOVIE FILE NOTE: COPY function is not possible dur ing RECORD. Stop recording to enable COPY function! Press the PLAY key to start pl ayi ng bac k.
MONITOR VIEWS / OPERATIO N 10. MONITOR VIEWS / OPERATION The TP-S109DR /TP-1016DR digi tal recorders provide 1 main monitor and 5 matrix mon itors. These monitors have diffe rent functionalities: Main.
DATA EXPORT 9.3 EXPORT EVENT LOG LIST This function a llows to export the event log list to Compac tFlash – Ca rd. The generated text file in in *.txt format.
MONITOR VIEWS / OPERATIO N 10.2. CALL / MATRIX MO NITORS Press CALL to change settings for CALL / MATRIX monitors. The Main monito r shows following dia logue: CALL MATRIX NORMAL STATE SETTING MENU PRESS CALL TO SET CALL MONITOR PRESS 1 -4 TO S ELECT MAT RIX PRESS M ENU TO EXIT Select the mo nitor by pressing CALL or the numeri c keys 1 ~4.
11. REMOTE CONTROL 11.1 RS-485 REMOTE CONTR OL The new standard EverFocus ED SR remote p rotocol allows challenging insta llations wi th DVR remo te control at different installation sites .
IR Remote Controller 11.2 IR Remote Controller (optional) The remote controller (RC -200, Figure 1) is an accessor y to enhance the handy operations of the DVR. You can perfor m all the settings and operations by the remote controlle r. The effective distance is up to 10 meters without any obstac le.
View From Internet/Intranet 12. View From Internet/Intranet Basic Operations and Logi n Di splay: Go to the Internet Explor er, key in the network IP address, for example , http://192.168.10.5 (must be the same IP address as the one assigned to the unit from the Network Setting Menu.
View From Internet/Intranet Main Screen 10 11 12 13 15 16 17 18 1 2 3 4 5 6 7 8 9 14 19 Above diagram is the main sc reen display. The icons on the lo wer corner o f the screen are mainly for control and Configuration, those on the right corne r are for status indi cation.
View From Internet/Intranet 10. The system allows up to 3 ways playback video, by SEGMENT, ALARM LIST and DATE TIME . 40 (Playba c k by Date time) (Playback by ALARM LIST, click Refresh to show list) .
View From Internet/Intranet 11. All available se gments are sh own in t he list. Click to select and hig hlight. 12. Click to p layback selected video segment. 13. Press this icon to show the segment or list. 14. Current connection and playback status is shown a long with date and time.
Appendix-A LAN Functional Specification Specifications : Network In terface: 10Mbits/s Ethernet (10Base T) LAN controller Chip: RealTek 8019 LAN Connector: RJ-45 Protocol: HTTP,TCP/IP.
Appendix-B Time Lapse Mode Recording Time Table When Recording w ith 160GB HDD Lower Low Basic Standard : 27 High Superio : 35 44 r : 15 kB : 19 kB : 23 kB kB : 31 kB kB (Estimated with typical im.
Appendix-B When Recording w ith 320GB HDD Lower Low Basic Standard : 27 High Superio : 35 r : 15 kB : 19 kB : 23 kB kB : 31 kB kB (Estimated with typical image-l ow noise level) NTSC Un i t : Ho ur system st orage(G B) : 320 Rec or di ng Speed LO WER LO W BA SI C STANDA RD HI G H SUPE RI OR ( f p s ) 1 51 92 32 73 13 5 60 98.
Appendix C: Serial In terface Specifications Serial Interface Specifications 1. RS-232 pin assignment The DVR may be controlled by a computer or a termina l via the standard D-SUB 9 -pin RS-232 connector .
Appendix C: Serial In terface Specifications 3. Remote Control Protocol A computer or a terminal can be used to control the unit by sending the packe t as following.
Appendix C: Serial In terface Specifications 2-1. The fo rmat of message packet is as follows: Length Byte (Prefix: 0x 86, 0x87, or 0x88 ..... ) Receiver ID hig h byte Receiver ID low byte Opcode Byte Data B yte1 Data B yte2 Data B yte3 Checksum Byte 2-2.
Appendix C: Serial In terface Specifications 2-3. Receiver ID 2-3. Receiver ID 1). Individual receiv er ID Decima l 14bit binar y value Hbyte Lbyte Receiver ID (EDSR ) 0 0000000 0000000 00 00 ID = 0 1 0000000 0000001 00 01 ID = 1 2 0000000 0000010 00 02 ID = 2 .
Appendix C: Serial In terface Specifications 2-4. Opcode Byte & Data bytes 2-4-1. OPcode OPcode Data1 Function 0x4B Keycode A remote key pressed 0x4D command Matrix command 2-4-2.
Appendix C: Serial In terface Specifications 2-4-3. Matrix comm and (OPco de=0x4D) Data1 Matrix f uncti on 0x00 Matrix mon itor0 - ch01 spot 0x01 Matrix mon itor0 - ch02 spot 0x02 Matrix mon itor0 - c.
Appendix-D Alarm I/O pin assignment The alarm connector, Figure 1 , is used to provide one sensor alarm input fo r each camera input. For eas y operation, an alarm ex tension board, Figure 2 , is p rovided to connect to the alarm connecto r.
Ein wichtiger Punkt beim Kauf des Geräts EverFocus TP-S1 0 9DR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie EverFocus TP-S1 0 9DR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EverFocus TP-S1 0 9DR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EverFocus TP-S1 0 9DR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EverFocus TP-S1 0 9DR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EverFocus TP-S1 0 9DR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EverFocus TP-S1 0 9DR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EverFocus TP-S1 0 9DR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EverFocus TP-S1 0 9DR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
