Benutzeranleitung / Produktwartung ZyAIR G-200 des Produzenten Equinox Systems
Zur Seite of 52
ZyAIR G-200 802.11g Wireless USB Adapter User's Guide Version 1.1 11/2004.
ZyAIR G-200 User’s Guide ii Copyright Copyright Copyright ©2004 by ZyXEL Communications Corporation The contents of this publication may not be re produced in any part or as a whole, transcribed, s.
ZyAIR G-200 User’s Guide ZyXEL Limited Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to on e (1) year from the date of purchase.
ZyAIR G-200 User’s Guide iv Information for Canadian Users Information for Canadian Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operation and safety requirements.
ZyAIR G-200 User’s Guide FCC Statement v Federal Communications Commission (FCC) Interference S t atement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.
.
ZyAIR G-200 User’s Guide Customer Support vii Customer Support When contacting your Customer Support Representative, please have the following inform atio n ready: Product model and serial number. Warranty Information. Date you received your product.
.
ZyAIR G-200 User’s Guide Table of Contents ix T able of Content s Chapter 1 Getting Started ...................................................................................................... ....... 1-1 1.1 ZyAIR Hardware and U tility Installation .
.
ZyAIR G-200 User’s Guide List of Figures xi List of Figures Figure 1-1 W indows XP : System T ray Icon ........................................................................................ ........ 1-1 Figure 1-2 W indows XP : System T ray Icon .
ZyAIR G-200 User’s Guide xii List of Tables List of T ables T able 1-1 ZyAIR Utility: System T ray Icon ...................................................................................... .......... 1-3 T able 2-1 ZyAIR Utility: Li nk Info ......
ZyAIR G-200 User’s Guide Preface xiii Preface Congratulations on the purchase of your new ZyAIR G-200 802.11g Wireless USB Adapter! About This User's Guide This guide provides information about the Zy AIR G-200 802.11g Wireless USB Utility that you use to configure your ZyAIR.
.
ZyAIR G-200 User’s Guide Getting Started 1-1 Chapter 1 Getting Started This chapter prepares you to using the ZyAIR Utility. 1.1 ZyAIR Hardware and Utility Inst allation Follow the instructions in the Quick Installation Guide to install the ZyAIR Utility and driver and make hardware connections.
ZyAIR G-200 User’s Guide 1-2 Getting started 3. Double-click on the icon for wire less network connectio n to display a status window as shown next. Figure 1-3 Windows XP: Wireless Network Connection Status 4. Clic k Properties and click the Wireless Networks tab.
ZyAIR G-200 User’s Guide Getting Started 1-3 6. In the Wireless Network Conn ection Properties windo w, make sure the Use Windows to configu re my wireless network settings check box is not selected. Click OK . Figure 1-5 Windows XP: Wireless Network Connection Properties 1.
.
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-1 Chapter 2 Using the ZyAIR Utility This chapter shows you how to config ure the ZyAIR using the ZyAIR Utility. 2.1 About Wireless LAN Network This section describes the wireless LA N network terms and applications.
ZyAIR G-200 User’s Guide 2-2 Using the ZyAIR Utility T o set up an ad-hoc network, configure all wireless client s in ad-hoc network type and use the same SSID and channel. Infrastructure When a number of wireless clients are connected using a single AP, you have a Basic Service Set (BSS).
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-3 Figure 2-4 Roaming Example 2.2 The Link Info Screen When the ZyAIR Utility starts, the Link Info screen displays, showing the current configuration of your ZyAIR. Figure 2-5 ZyAIR Utility: Link Info The following table describes th e fields in this screen.
ZyAIR G-200 User’s Guide 2-4 Using the ZyAIR Utility Table 2-1 ZyAIR Utility: Link Info LABEL DESCRIPTION Re-Connect Click Re-Connect to re-establish the connection to the wireless network whose SSID is shown in the Current SSID field. Channel This field displays the radio channel the ZyAIR is currently using.
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-5 Figure 2-6 Site Survey The following table describes th e fields in the table. Table 2-2 Site Survey FIELD DESCRIPTION SSID This field displays the SSID (or name) of each wireless device. Signal This field displays the signal strength of eac h wireless device.
ZyAIR G-200 User’s Guide 2-6 Using the ZyAIR Utility 1. Clic k Search to scan for all available wireless networks within range. 2. To join a network, either click an entry in th e table to select a wireless network and then click Connect or double- click an en try.
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-7 Table 2-3 Configuration FIELD DESCRIPTION Configuration Service Set Identifier Enter the SSID (Service Set Identifier) of th e AP or the peer ad-hoc computer to which you want to associate in this field.
ZyAIR G-200 User’s Guide 2-8 Using the ZyAIR Utility If you do not enable any wireless security on your ZyAIR, communication between the ZyAIR and the wired network is accessible to any wirel ess networking device that is in the coverage area.
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-9 Figure 2-9 WEP Authentication Steps Open System authentication involves an unencrypted tw o-message procedure. A wireless station sends an open system authentication request to the AP, which will then automatically accept and connect the wireless station to the network.
ZyAIR G-200 User’s Guide 2-10 Using the ZyAIR Utility Figure 2-10 WEP Authentication Follow the instructions in the tabl e to configure the WEP encryptions. Table 2-4 WEP Authentication FIELD DESCRIPTION Authentication Select WEP from the drop-down list bo x to activate WEP Authentication .
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-11 Table 2-4 WEP Authentication FIELD DESCRIPTION Transmit Key Enter the key number (1 to 4) in this field. Only one key can be en abled at any one time. This key must be the same on t he ZyAIR and the wireless stations to communicate.
ZyAIR G-200 User’s Guide 2-12 Using the ZyAIR Utility Encryption WPA improves data encryption by using Tempor al Key Integrity Protocol (TKIP), Message Integrity Check (MIC) and IEEE 802.1x. Temporal Key Integrity Protocol (TKIP) uses 128- bit keys that are dynamically generated and distributed by the authentication server.
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-13 Table 2-5 WPA Authentication FIELD DESCRIPTION Authentication Select WP A from the drop-down list box. Encryption Status All unicast traffic is automatically encrypted by TKIP when WPA or WP A-PSK Authentication is selected.
ZyAIR G-200 User’s Guide 2-14 Using the ZyAIR Utility WPA-PSK Application Example A WPA-PSK application looks as follows. 1. First enter identical passwords into the AP and all wireless clients. The Pre-Shared Key (PSK) or Passphrase must consist of between 8 and 63 ASCII characters (including spaces and symbols).
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-15 Figure 2-13 WPA with RADI US Appli cation Example Figure 2-14 WPA-PSK Authentication Follow the instructions in the tabl e to configure the WEP encryptions. Table 2-6 WPA-PSK Authentication FIELD DESCRIPTION Authentication Select WP A-PSK from the drop-d own list box.
ZyAIR G-200 User’s Guide 2-16 Using the ZyAIR Utility Table 2-6 WPA-PSK Authentication FIELD DESCRIPTION Encryption Status All unicast traffic is automatically encrypted by TKIP when WPA or WP A-PSK Authentication is selected. See the section on Encr yption for details about Temporal Key Integrity Protoc ol ( TKIP ).
ZyAIR G-200 User’s Guide Using the ZyAIR Utility 2-17 Figure 2-15 802.1x Authentication Follow the instructions in the table to configure 802.1x authentication. Table 2-7 802.1x Authentication FIELD DESCRIPTION Authentication Select 802.1x f rom the drop-do wn list box.
ZyAIR G-200 User’s Guide 2-18 Using the ZyAIR Utility Figure 2-16 About The following table describes the r ead-only fields in this screen. Table 2-8 About FIELD DESCRIPTION Utility Version This field displa ys th e version number of the ZyAIR Utility.
ZyAIR G-200 User’s Guide Maintenance 3-1 Chapter 3 Maintenance This chapter describes how to uninstall or upgrade the ZyAIR Utility. 3.1 Removing the ZyAIR Utility Follow the steps below to remove (or uninsta ll) the ZyAIR Utility from your computer.
ZyAIR G-200 User’s Guide 3-2 Maintenance Figure 3-2 ZyAIR Utility: Exit 2. Double-click the removable device icon in the system tray. Figure 3-3 Removable Device System Tray Icon: Windo w s XP 3. When a Safely Remove Hardware window displays, select the ZyAIR device in the Hardware devices list and click Stop .
ZyAIR G-200 User’s Guide Maintenance 3-3 Figure 3-6 Stop a Hardware device: Windo w s XP 6. After the following notice window displays in the system tray, you can safely disconnect the ZyAIR from your computer.
.
ZyAIR G-200 User’s Guide Troubleshooting 4-1 Chapter 4 Troubleshooting This chapter covers potential problem s and the possible remedies. After each problem description, some instructions are provided to he lp you to diagnose and to solve the problem.
ZyAIR G-200 User’s Guide 4-2 Troubleshooting Table 4-2 Troubleshooting Communi cation Problems PROBLEM CORRECTIVE ACTION B. Ad-Hoc (IBSS) Verify that the peer computer(s) is turned on. Make sure the ZyAIR and the peer computer(s) are usin g the same SS ID and channel.
ZyAIR G-200 User’s Guide Wireless LAN and IEEE 802.11 A Appendix A Wireless LAN and IEEE 802.1 1 A wireless LAN (WLAN) provides a flexible data communications system that you can use to access various services (navigating the Internet, emai l, printer services, etc.
ZyAIR G-200 User’s Guide B Wireless LAN and IEEE 802.11 Diagram 4-1 Peer-to-Peer Communication in an Ad -hoc Network Infrastructure Wireless LAN Configuration For infrastructure WLANs, multiple access points (APs) link the WLAN to the wired network and allow users to efficiently share networ k resources.
ZyAIR G-200 User’s Guide Wireless LAN With IEEE 802.1x C Appendix B Wireless LAN W ith IEEE 802.1x As wireless networks become popular for both portable computing and corporate networks, security is now a priority. Security Flaws wi th IEEE 802.1 1 Wireless networks based on the original IEEE 802 .
ZyAIR G-200 User’s Guide D Wireless LAN With IEEE 802.1x Diagram 4-3 Sequences for EAP MD5–Challenge Authentication Client computer access authorized.
ZyAIR G-200 User’s Guide Types of EAP Authentication E Appendix C T ypes of EAP Authentication This appendix discusses the five popular EAP authentication types: EAP-MD5 , EAP-TLS , EAP- TTLS , PEAP and LEAP . The type of authentication you use depends on the RADIUS server.
ZyAIR G-200 User’s Guide F Types of EAP Authentication Comparison of EAP Authentication T ypes EAP-MD5 EAP-TLS EAP-TTLS PEAP LEAP Mutual Authentication No Yes Yes Yes Yes Certificate – Client No Y.
ZyAIR G-200 User’s Guide Product Specifications G Appendix D Product S pecifications PHYSICAL SPECIFICATIONS Product Name ZyAIR G-200 Wireless LAN USB Adapter Type USB 2.0 Standards IEEE 802.11b IEEE 802.11g Antenna Internal PCB antenna Power 5V DC Dimensions 110.
ZyAIR G-200 User’s Guide H Product Specifications SOFTWARE SPECIFICATIONS Device Drivers Windows 2000, Windo ws XP. 2 Roaming 802.11 compliant WEP Supports 64-bit and 128-bit encr yption ENVIRONMENTAL SPECIFICATIONS Temperature Operating: 0° ~ 55° C Storage: -25° ~ 70° C Relative Humidity 10% to 90% (non-condensing ) 2 At the time of writing.
ZyAIR G-200 User’s Guide Index I Index A About ..................................................... 2-17 Accessing the ZyAIR Utility ................... 1-3 Ad-hoc Configuration................................. A Automatic WEP key generation ......
ZyAIR G-200 User’s Guide J Index Protected EAP .............................. See PEAP R Related Documentation ........................... xiii Remove the ZyAIR Utility ...................... 3-1 RF signals ..........................................
Ein wichtiger Punkt beim Kauf des Geräts Equinox Systems ZyAIR G-200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Equinox Systems ZyAIR G-200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Equinox Systems ZyAIR G-200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Equinox Systems ZyAIR G-200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Equinox Systems ZyAIR G-200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Equinox Systems ZyAIR G-200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Equinox Systems ZyAIR G-200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Equinox Systems ZyAIR G-200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Equinox Systems ZyAIR G-200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
