Benutzeranleitung / Produktwartung 1EMP-S1 des Produzenten Epson
Zur Seite of 73
1 EMP-S1 User’s Guide User's Guide.
1 EMP-S1 User’s Guide Meaning of Symbols The term s "this u nit" an d "this project or" whi ch appe ar in thi s manua l may a lso ref er to the accessori es suppl ied w ith the p roj e ctor and othe r opti onal pr oduct s.
2 EMP-S1 User’s Guide Features f Auto setup (Computer connections) The projector analyses the signal of the computer to which it is connected and automatica lly makes ad justments to ensure optima l projection resu lts. s "Auto setup (Computer connections)" P .
3 EMP-S1 User’s Guide Contents Meaning of Symbol s .............. .......... ......... ......... .......... .............. ...... 1 Features .. .............. ......... ......... .......... ......... ......... .............. .......... ...... 2 Contents .
4 EMP-S1 User’s Guide Before Usi ng the Projector Part Names and Functions Fron t/To p • remote control infrared re ceiver s P. 9 Receives signals from the remote control. • ventilation outlet • lens cover Attach when not using the projector to prevent the lens from becoming dirty or damaged.
5 EMP-S1 User’s Guide Before Using the Projector > Part Names and Functions Contr ol pane l • [Power] button s P. 2 0 Turns the proj ector on and off. • Power indicator s P .20, P .42 Flashes or lights in different colours to indicate the operating status of the projector.
6 EMP-S1 User’s Guide Before Using the Projector > Part Names and Functions Rear • Computer/Component Vide o port s P .13, P . 18 Inputs analog ue video sig nals from a computer and Component Video g signals from other video sources. • Monitor Out port s P.
7 EMP-S1 User’s Guide Before Using the Projector > Part Names and Functions Base • Ceiling mount fixing points (3 points) Install the optional ceiling mo unt here when suspending the proj ec tor fro m th e ceil i ng. • lamp cover s P. 5 6 Open this cover when replacing the lamp inside the projector.
8 EMP-S1 User’s Guide Remote Control • remote control infra red transmitter Transmits remote control signals. • [Aspect] button s P. 2 9 Changes the aspect ratio of imag es from 4:3 to 16:9. • [Source] buttons s P. 2 6 [Computer]: Switches to the signal source being input to the Computer/Component Video port.
9 EMP-S1 User’s Guide Before Using the Projector > Remote Control f Before using the Re mote Control Remove the insulating tape. f Using the Remote Co ntrol Operate the remote control by aiming it at the remote control infrar ed receiver on the proje ctor.
10 EMP-S1 User’s Guide Installation Install ation method Set up th e proj ector so t hat i t is at r ight an gles to a scree n. Proj ection dista nce and screen size The values should be used as a guide for setting the projector. c Be sure to read the "Safety In structions / W orld-W ide W arranty T erms" gui de before installation.
11 EMP-S1 User’s Guide Before Using the Projector > Installation Other installati on methods f Rear projection (Using a translucent screen) f Ceiling projection f Ceiling/Rear projec tion (Using a translucent screen) * The optional ceiling m ount is required when i nstalling the projector from a ceiling.
12 EMP-S1 User’s Guide Connecting to a Computer Compati ble com puter s Con dit ion 1 : Check that the comp uter ha s an im age outp ut port, such as an RGB port, mo nitor po rt or CR T port. Some computers wi th an in-bu ilt monitor and some l aptop computers may not be compatible.
13 EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer Proj ecting image s from a compu ter Differ ent cabl es are u sed depend ing on w heth er the m onito r por t of your compute r is a Mini D- Sub 1 5Pin, 5BNC g or 13w3 p ort.
14 EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer Play ing so und from a comp uter You can p lay sound from a comp uter thr ough th e proj ector's in-bui lt speaker. f Volume adjustment Press [ a ] or [ b ] on the remote control.
15 EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer Presen tation Remote Con troll er You can u se the Presentation R emote Con troller as a wi reless mouse to contro l the mouse poi nter o n the com puter scr een.
16 EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer C Keeping the defaults, clic k "Next". D Click the check box nex t to "Specify a location" and type "C:WINDO WS". Click "Ne xt" E Click on "Next" to con firm the message which is displayed.
17 EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer f Part Names and Fu nctions Operate t he Prese ntation Remot e Control ler by aiming it a t the Present ation Remote Receiver .
18 EMP-S1 User’s Guide Connecting to Video Equipment Proj ectin g vi deo im ages f For Composite Vide o (DVD, VHS, Vide o games) f For S-Video (DVD, S -VHS, Video gam es) f For Component Vide o (DVD, Video gam es) c When connecting, be sur e to: • Turn of f the pow er for both the projector and the v ideo equi pme nt.
19 EMP-S1 User’s Guide Before Using the Projector > Connecting to Video Equipment f For RGB Video Playing so und from vid eo equipment f Volume adjustmen t Press [ a ] or [ b ] on the remote control. You can also adjust the volume with the configuration menu.
20 EMP-S1 User’s Guide Basic Operat ion Turning on the Projector A Connect the computer/vid eo. s "Connecting to a C omputer" P .12 , "Connecting to V ideo Equipment" P .18 B Remove the lens cover. C Attach the power cable to the projector.
21 EMP-S1 User’s Guide Basic Operation > Turning on the Pr ojector F Press the [Power] button. The projector beeps and the power supply indicator begins to blink green.
22 EMP-S1 User’s Guide Turning off the Projector A Turn off the power to the c omputer/video equ ipment. B Press the [Power] button. A confirmation screen is displayed. C Press the [Power] button again. The power indicator begins to blink. D Wait until the power indic ator lights orange .
23 EMP-S1 User’s Guide Adjusting the Display Adjust ing the projec tion si ze The size o f the pr ojected ima ge is ba sically determin ed by the distance fr om the p rojecto r to the screen. s "Projection distance and screen size " P .10 A Press the [Wide] or [Tele ] buttons on the con trol panel to adjust the projection si ze.
24 EMP-S1 User’s Guide Basic Ope ration > Adju sting the Di splay Adjusting the projection angle Set up th e proj ector so t hat i t is at r ight an gles to a screen. If it is not possible to set up the projector so that it is at right angles to a screen, it can be set up at a slight vertical angle instead.
25 EMP-S1 User’s Guide Basic Ope ration > Adju sting the Di splay Keyst one When th e proj ector is not set at right ang les to a screen, th e displ ay distorts in the shape of a trap ezoid. Th is disto rtion can be corrected. A Press the [ v ] or [ w ] buttons.
26 EMP-S1 User’s Guide Selecting the Input Source When a device is connec ted, pr oject ion com mence s automa ticall y without h aving to select th e input source, h owever when conn ected t o two or more device s, select desired the input source. Projector The input source changes each time [Source ] is pressed.
27 EMP-S1 User’s Guide Advanced Op eration Functions for Enhancing Projection Adjusting computer generate d images f Auto setup (Computer connections) The computer signal is analysed and the following settings are adjusted to ensure the optimum ima ge quality.
28 EMP-S1 User’s Guide Advanced Operation > Funct ions for Enhancing Proje ction A/V Mute Temporar ily stop s the im age a nd sound. A Press the [A/V Mute] button on the remote co ntrol. The sound and image disappear. Projection is resumed when you press the [A/V Mute] button again or press the [Esc] button.
29 EMP-S1 User’s Guide Advanced Operation > Funct ions for Enhancing Proje ction Project ing in widescr een (changin g aspect ratio) This function chan ges the Aspect ra tio g of im ages from 4:3 to 16:9 when co mpon ent vide o imag es (YCbCr and YPbPr ) or vid eo images (S-Vid eo or composi te vide o) are be ing pr ojecte d.
30 EMP-S1 User’s Guide Advanced Operation > Funct ions for Enhancing Proje ction E-Zo om The imag e is enlarg ed or reduced . A Press the [E-Zoom z ] button on the remote control. A target scope is displayed on the screen. B Press the [ u ][ d ][ l ][ r ] buttons to move the target scope to the centre of the part you wish to enlarge/ reduce.
31 EMP-S1 User’s Guide Configuration Menus Variou s adjustme nts and se ttings can be mad e within th e config uratio n menus. Imag e rr Color Mode Image rr Color Mode (Computer Images) (V ideo Images) r Picture Quality rr Brightness r Picture Quality rr Brig tne ss r Contrast r C ontrast r Sharpness r Satura tion r T racking r Ti n t r Sync.
32 EMP-S1 User’s Guide Advanced Operation > Configuration M enus Menu oper atio n A Press the [Menu] button The top configuration menu is displayed.
33 EMP-S1 User’s Guide Advanced Operation > Configuration M enus C Press the [ e ] button. Sub Menu 1 is displayed. D Press the [ u ] or [ d ] buttons to select the Sub Men u 1 items, then press the [ e ] button. E For Sub Menu 2, press th e [ u ] or [ d ] buttons in the same way, then press the [ e ] b utton.
34 EMP-S1 User’s Guide Advanced Operation > Configuration M enus (c)Press the [ l ] or [ r ] buttons to select the value. Then, press the [ e ] button. (d)Press the [ u ] [ d ] [ l ] [ r ] buttons to move the image display position. G Set other items in the sa me way.
35 EMP-S1 User’s Guide Advanced Operation > Configuration M enus Functio n list f Image menu • When no signal is being input, only the settings for " Auto Setup" and "Input Signal" can be adjusted. • The functions in the "Image" Menu will be different according to the type of signal which is being input.
36 EMP-S1 User’s Guide Advanced Operation > Configuration M enus Sub me nu Function Color Mode Corrects the vivi dness of the image colour . The settings can be sa ved separately for each type of source (computer or video). Select from 5 dif ferent quality settings depending on the type of scene.
37 EMP-S1 User’s Guide Advanced Operation > Configuration M enus Pictur e Quality Sync. g (Computer images only) Adjusts the image when flickering, fuzziness or interferenc e occur in the image. Flickering and fuzziness may also occur when the brightness, contrast, sharpness or keystone correction settings are adjusted.
38 EMP-S1 User’s Guide Advanced Operation > Configuration M enus f Setting menu Sub me nu Function Screen K eystone Corrects vertical k eystone distortion in the image .
39 EMP-S1 User’s Guide Advanced Operation > Configuration M enus Display Message When set to "OFF", messages such as "No signal", and the name of the selected input source or colour mode will no longer be dis played. W arning messages such as "Replace the lamp" will conti nue to be displayed.
40 EMP-S1 User’s Guide Advanced Operation > Configuration M enus f Info menu Computer images Video images Sub menu Function Lamp Hours Displays t he cumulati ve lamp ope rating time. • When the accumulated usage time of the lamp reaches about 1900hours, a warning will be displayed in red.
41 EMP-S1 User’s Guide Advanced Operation > Configuration M enus f Reset menu Sub menu Function Lamp-Hours Reset Resets the l amp operating time . When this command is selected, the cumulati v e lamp operat ing time is reset to t he defa ult val u e .
42 EMP-S1 User’s Guide Troubleshooting When You Suspect a Problem First, check th e indicators on the p rojector. There ar e two i ndicat o rs on the p rojecto r un it whi ch not ify you of pr ojec tor cond itio ns. Power indi cato r lit flas hing • If the indicat or is not lit, the power supply is n ot on.
43 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem Warnin g indicator lit flas hing • Not li t und er no rmal oper ating co ndit ions. Condition Cause /Remedy s Red High int er nal temp erat ur e (ov erh eatin g) The lamp turns off automatically and projection stops.
44 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem p • If problems with projection do occu r , b ut the indicators do not show any abnormal conditions, please refer to the section "Whe n the indicators provide no help" on the next page.
45 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem When the indica tors pr ovide no help • No images appear (Nothi ng is displayed) s P. 4 5 • No images appear (Mess ages are displayed 1) s P. 4 6 • No images appear (Mess ages are displayed 2) s P.
46 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f No images appear (Messages are d isplayed 1) f No images appear (Messages are d isplayed 2) "Not supported" • Check the mode which corresponds t o the frequency of the image signal s being output from the c omputer.
47 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f Image is out of focu s (unclear) • The image is fuzzy • Part of the image is out of focus • The whole image is out of focus • Have the " Sync.
48 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f Vertical stripes ap pear in the imag e f Image is distorted / Image contains interference • Has the " Tracking g " setting been a djusted? Set the tracking v alue until the v ertical stripes disappear .
49 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f Only part of the image is displayed (large/small) • Change the resolu tion for the lapt op computer or computer wit h a LCD screen. Change the resolution so that the image is displayed in the whole of the projection area, or set the image signal to external output only .
50 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f Image colours are poor, tinted green or tinted red/purple • Are the image signal for mat settings corr ect? If a componen.
51 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f Image is dark f No sound can be he ard • Does the lamp need replac ement? When the la mp is due for replac ement, colours will we aken a nd the image will become dark. Re place the lamp when this is the case.
52 EMP-S1 User’s Guide Troubleshooting > Whe n You Suspect a Pr oblem f The remote control does not work f The power does no t turn off (after the [P ower] button is pressed) • Is direct sunlight o r strong light from fluores cent lamps s hining onto the remote control infrar ed receiver ? s "Using the Remote Control " P .
53 EMP-S1 User’s Guide Appe ndices Projector Care Clea ning You shoul d clea n the pr ojector if it beco mes dirty or if the project ed image starts to det eriorate . f Cleaning the projec tor case Clean the projector case by wiping it gently with a soft cloth.
54 EMP-S1 User’s Guide Appendices > Projector Care f Cleaning the air filte r If the air filter become s clogged with dust, it can cause overheating and damage the projector. Keeping the projector horizontal, use a vacuum cleaner to clean a way the dust from the air filt er.
55 EMP-S1 User’s Guide Appendices > Projector Care Replac ing co nsuma bles f Changing the battery (Remote Control, Pre sentation Remote Controller) Replacement battery: 1 × CR2025 lithium battery A Remove the battery holde r. While pressing the catch of the battery holder inwards, pull the battery holder out.
56 EMP-S1 User’s Guide Appendices > Projector Care f Lamp replacement period • It is time t o change the l amp when the "R eplace Lamp" m essage appears in the bottom left hand corner of the scree n at the commencement of projection and remains for 30 seconds.
57 EMP-S1 User’s Guide Appendices > Projector Care C Loosen the fixing screws holding the lamp in place. D Remove the old lamp. E Install the new lamp. Press the lamp until it clicks into place, then tight en the two fixing screws. F Replace the lamp cover .
58 EMP-S1 User’s Guide Appendices > Projector Care f Resetting the lamp operating time The projector has a built-in counter whic h keeps track of the lamp operating time and causes the replaceme nt warning message to be displayed when the cumulative operating time reac hes a certain point.
59 EMP-S1 User’s Guide Appendices > Projector Care f Replacing the air fi lter Replacing th e air filter can al so be performed whe n the projec tor is mounted to a ceiling. A Turn off the projector powe r, wait for the coo l-down period to end, then discon nect the power c able.
60 EMP-S1 User’s Guide Optional Accessories The follow ing o ptional a ccessories are ava i lable for purchase if requ ired. Th is l ist of op tional accessori es is cur rent as o f M a y 2003. Details of accessories a re subj ect to change w ithout notice .
61 EMP-S1 User’s Guide Appendices > Optional Accessories * A spec ial m ethod of installation is re quire d in or der to suspe nd the p r ojecto r fr om the ce ilin g. Please conta ct your dealer i f you requ ire this installation meth od. ELPMB11 Ceiling mount* Use when installing th e projector to a ceiling.
62 EMP-S1 User’s Guide Glossary Complex te rms used in thi s book, or ter ms not ex plained i n the body of the text, will be briefl y explained here. For furthe r explanation , please consu lt comm erciall y ava ilable refe rence texts . 5BNC A type of connector used to input analog video signals.
63 EMP-S1 User’s Guide Appendices > Glossary Refresh Rate The light-e mitting elem ent of a display m a intains t he same luminosity and colour for an extremely short time. For this reason, th e image must b e scanned many times per second in order to refresh the light- emitting element.
64 EMP-S1 User’s Guide Appendices > Glossary YCbCr The ca rrier signal contained in the colour bar signal used in modern (NTSC) TV transmissions. The name comes from the Y (luminance) signal and the CbCr (chroma (colour)) signals. YPbPr The ca rrier signal contained in the colour bar signal used in high-definit ion TV (HDTV) transmissions.
65 EMP-S1 User’s Guide Cable Format f Serial connection • Connector type: D-Sub 9 pin(male) • Projector input port type : RS-232C <Proje ctor > <Com puter > <Projector> (PC ser.
66 EMP-S1 User’s Guide Supported Display Resolutions f Computer * Conn ectio n is not po ssib le if the equipme nt doe s not ha ve a VG A outp ut port . f Component Video f Composite Video/S -Video It may be possibl e to pro ject sig nals w hich ar e not listed in the a b ove table.
67 EMP-S1 User’s Guide Specifications Pixelworks ICs are used in this projector. Pr o duct name LCD Projector EMP- S1 Saf ety USA (100-12 0V A C) UL1950 3 rd Edition Canada (1 00-120V A C) CSA C22.2 No.950-95 (cUL) European Comm unity ( 200-240V A C) The Lo w V oltage Directi ve ( 73/23/EEC) IEC60950 2 nd Edition, +Amd.
68 EMP-S1 User’s Guide Appearance 3.4 56.4* 370 87.5 8 106 * Distance from cent re of lens to c eiling mount Centre of projector Centre of lens 114 80 12 265 45.
69 EMP-S1 User’s Guide Index Numerics 13w3 port ... ................... ............. ................... .................... ............. ................... .. 13 5BNC port ........ ............. ................... ............. ...............
70 EMP-S1 User’s Guide > Index J Joystic k ............ ................... ............. .................... ................... ............. ............... 17 K Keystone .......... ................... .................... ............. .....
71 EMP-S1 User’s Guide > Index S-Video port .................. ............. ................... ............. .................... ................... .... 6 Sync Info ....................... ............. ................... ............. .....
72 EMP-S1 User’s Guide We :EPSON AM ERICA, INC. Loc ated at :3840 Kil roy Airp ort W ay MS: 3-13 Long Beac h, CA 9080 6 Tel : 562- 290-525 4 Declare under so le resp onsibil ity tha t the product id entified here in, complies with 47 CFR Part 2 and 15 o f the FCC rules as a Class B digital device.
Ein wichtiger Punkt beim Kauf des Geräts Epson 1EMP-S1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Epson 1EMP-S1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Epson 1EMP-S1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Epson 1EMP-S1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Epson 1EMP-S1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Epson 1EMP-S1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Epson 1EMP-S1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Epson 1EMP-S1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Epson 1EMP-S1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
