Benutzeranleitung / Produktwartung KP6-LA des Produzenten EPoX Computer
Zur Seite of 41
TRADEMARK All products and company names are trademarks or registered trademarks of their respective holders. These specifications are subject to change without notice.
KP6-LA.
KP6-LA Technical Support Services If you need additional information, help during installation or normal use of this product, please contact your retailer. If your retailer can not help, you may E-Mail us with any questions at the following address tech@epox.
KP6-LA User Notice No part of this product, including the product and software may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by.
KP6-LA.
KP6-LA.
KP6-LA Table of Contents Section 1 Introduction Components Checklist ................................. 1-1 Overview Pentium II ................................................... 1-2 S.E.C. Cartridge Terminology ..................... 1-3 Accelerated Graphics Port .
KP6-LA Power Management Setup ........................... 4-13 PNP/PCI Configuration ............................... 4-16 Load Setup Defaults .................................... 4-18 Integrated Peripherals .................................. 4-19 Change Supervisor or User Password .
Introduction KP6-LA Page 1-1 Section 1 INTRODUCTION Components Checklist ü A. (1) KP6-LA mainboard ü B. (1) KP6-LA user ’ s manual ü C. (1) Floppy ribbon cable ü D. (2) Hard drive ribbon cables ü E. (1) Retention Module ü F. (1) Heatsink Support Unit ü G.
Introduction KP6-LA Page 1-2 Overview Pentium II The Pentium ® II Processor is the follow-on to the Pentium ® Processor. The Pentium ® II Processor, like the Pentium ® Pro processor, implements a Dynamic Execution micro-architecture -- a unique combination of multiple branch prediction, data flow analysis, and speculative execution.
Introduction KP6-LA Page 1-3 processor. This is the model used in past packaging technologies like PGA, TCP, PQFP, DIP, etc. S.E.C. Cartridge Terminology • Pentium ® II Processor The new enclosed card packaging technology is called a “ Single Edge Contact cartridge.
Introduction KP6-LA Page 1-4 Accelerated Graphics Port (AGP or A.G. P .) Typically, 3D graphics rendering requires a tremendous amount of memory, and demands ever increasing throughput speed as well. As 3D products for the personal computer become more and more popular, these demands will only increase.
Introduction KP6-LA Page 1-5 Page Left Blank.
Introduction KP6-LA Page 1-6 KP6-LA Form-Factor The EPoX KP6-LA is designed with ATX form factor - the latest industry standard of chassis. The ATX form factor is essentially a Baby-AT baseboard rotated 90 degrees within the chassis enclosure and a new mounting configuration for the power supply.
Introduction KP6-LA Page 1-7 I/O Shield Connector The KP6-LA is equipped with an I/O back panel. Please use the appropriate I/O shield (figure 3). ATX POWER SUPPLY KP6-LA Board Power-On/Off (Remote) The KP6-LA has a single 20-pin connector for ATX power supplies.
Introduction KP6-LA Page 1-8 Figure 5: System Block Diagram System Block Diagram.
Features KP6-LA Page 2-1 Section 2 FEATURES KP6-LA Features: • KP6-LA is based on the Pentium ® II Processor operating at 233 ~ 330 MHz on Slot 1. The board is configured by an Easy-Setting-Single-Jumper (E.S.S.J.) to match your CPU clock speed. • Designed with Intel ’ s 82443 LX AGPset.
Features KP6-LA Page 2-2 • KP6-LA utilizes a Lithium battery which provides environmental protection and longer battery life. • Supports the Universal Serial Bus (USB) connector. The onboard PIIX4 chip provides the means for connecting PC peripherals such as; keyboards, joysticks, telephones, and modems.
Installation KP6-LA Page 3-1 Section 3 INS TALLATION Real Picture of Motherboard.
Installation KP6-LA Page 3-2 PCI Slot #1 AGP SLOT CPU Cartridge SLOT 1 PCI Slot #2 PCI Slot #3 PCI Slot #4 ISA Slot #1 ISA Slot #2 ISA Slot #3 SIMM 1 SIMM 3 SIMM 2 SIMM 4 DIMM 2 DIMM 1 DIMM 3 FDD Conn.
Installation KP6-LA Page 3-3 Easy Installation Procedure Easy Installation Procedure The following must be completed before powering on your new system: 3-1. Configure Jumpers to match your hardware 3-2. Install memory chips 3-3. Install Pentium II Processor 3-4.
Installation KP6-LA Page 3-4 CPU Processor Selection JP8: = 1-2 - 200MHz = 3-4 - 233MHz (Default) = 5-6 - 266MHz = 7-8 - 300MHz = 9-10 - 330MHz = 11-12 - Reserved = 13-14 - Reserved = 15-16 - Disable E.
Installation KP6-LA Page 3-5 Section 3-2 System Memory Configuration Memory Layout The KP6-LA supports (3) 168-pin DIMMs (Dual In-line Memory Module) and (4) 72-pin SIMMs (Single In-line Memory Module). The DIMMs can be either EDO (Enhanced Data Out) or SDRAM (Synchronized DRAM).
Installation KP6-LA Page 3-6 * SDRAM only supports 8, 16, 32, 64, 128MB DIMM modules. Table 1 SIMM Module Installation The SIMM memory modules only fit into the sockets one way. There is a notch at one end of the memory that must fit into the SIMM socket.
Installation KP6-LA Page 3-7 Figure 3 To remove the SIMM module: release the clips on both sides of the SIMM socket (figure 4). Figure 4 DIMM Module Installation Figure 5 displays the notch marks and what they should look like on your DIMM memory module.
Installation KP6-LA Page 3-8 Figure 6 DIMM Module clip before installation Figure 7 DIMM Module clip after installation To remove the DIMM module simply press down both of the white clips on either side and the module will be released from the socket.
Installation KP6-LA Page 3-9 Section 3-3 Installing a Pentium II Processor The KP6-LA uses the Single Edge Contact (SEC) slot for a Pentium II processor packaged in an SEC cartridge. The SEC slot is not compatible with other non- Pentium II processors.
Installation KP6-LA Page 3-10 Now we are ready to install the SEC Cartridge (Pentium II Processor) into the Retention Module. The SEC Cartridge is mounted by sliding the SEC Cartridge into the Retention Module and letting it slide all the way down.
Installation KP6-LA Page 3-11 Section 3-4 Device Connectors Please install the motherboard into the chassis. Now that your motherboard is installed you are ready to connect all your connections (figure 12).
Installation KP6-LA Page 3-12 Power On/Off - This is connected to the power button on the case. Using the Soft-Off by Pwr-BTTN feature, you can choose either Instant Off (turns system off immediatly), or 4 sec delay (you need to hold the button down for 4 seconds before the system turns off).
DMI Access KP6-LA Page 5-1 Section 5 DMI ACCESS DMI Access DMI, or desktop Management Interface, is a feature that is able to auto-detect and record information about your computer system. This information is used by com- puting professionals to accurately determine your system configuration and to diagnose and resolve problems.
DMI Access KP6-LA Page 5-2 Page Left Blank.
Appendix KP6-LA A-1 Appendix A: A-1 MEMORY MAP Address Range Size Description [00000-7FFFF] 512K Conventional memory [80000-9FBFF] 127K Extended Conventional memory [9FC00-9FFFF] 1K Extended BIOS data.
Appendix KP6-LA A-2 [3D0-3DF] CGA adapter. [3F0-3F7] FLOPPY DISK controller. [3F8-3FF] SERIAL port 1. A-3 TIMER & DMA CHANNELS MAP TIMER MAP: TIMER Channel 0 System timer interrupt. TIMER Channel 1 DRAM REFRESH request. TIMER Channel 2 SPEAKER tone generator.
Appendix KP6-LA A-3 14 Onboard HARD DISK (IDE1) channel. 15 Onboard HARD DISK (IDE1) channel. A-5 RTC & CMOS RAM MAP RTC & CMOS: 00 Seconds. 01 Second alarm. 02 Minutes. 03 Minutes alarm. 04 Hours. 05 Hours alarm. 06 Day of week. 07 Day of month.
Appendix KP6-LA A-4 Page Left Blank.
Appendix KP6-LA A-5 Appendix B: B-1 POST CODES ISA POST codes are typically output to I/O port address 80h. POST (hex) DESCRIPTION 01-02 Reserved. C0 Turn off OEM specific cache, shadow. 03 1. Initialize EISA registers (EISA BIOS only). 2. Initialize all the standard devices with default values Standard devices includes.
Appendix KP6-LA A-6 0C Initialization of the BIOS Data Area. (40:ON - 40:FF) 0D 1. Program some of the Chipset's value according to Setup. (Early Setup Value Program) 2. Measure CPU speed for display & decide the system clock speed. 3. Video initialization including Monochrome, CGA, EGA/VGA.
Appendix KP6-LA A-7 3E Try to turn on Level 2 cache. Note: Some chipset may need to turn on the L2 cache in this stage. But usually, the cache is turn on later in POST 61h. 3F-40 Reserved. BF 1. Program the rest of the Chipset's value according to Setup.
Appendix KP6-LA A-8 61 1. Try to turn on Level 2 cache. Note: If L2 cache is already turned on in POST 3D, this part will be skipped. 2. Set the boot up speed according to Setup setting. 3. Last chance for Chipset initialization. 4. Last chance for Power Management initialization.
Appendix KP6-LA A-9 Appendix C NOTE: The " LOAD SETUP DEFAULTS " function loads the system default data directly from ROM and initializes the associated hardware properly. This function will be necessary when you accept this mainboard, or the system CMOS data is corrupted.
Ein wichtiger Punkt beim Kauf des Geräts EPoX Computer KP6-LA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie EPoX Computer KP6-LA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EPoX Computer KP6-LA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EPoX Computer KP6-LA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EPoX Computer KP6-LA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EPoX Computer KP6-LA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EPoX Computer KP6-LA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EPoX Computer KP6-LA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EPoX Computer KP6-LA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
