Benutzeranleitung / Produktwartung DLR3-08N/160CD des Produzenten Eneo
Zur Seite of 64
Operating Instructions Digital V ideo Recorder Models: DLR3-08N/160CD, DLR3-16N/160CD, DLR3-08N/410CD, DLR3-16N/410CD, DLR3-08N/660CD DLR3-16N/660CD.
.
3 DLR3-XXN/XX Safety instructions EMC class This digital video recorder (DVR) is a class A device in accordance with EN 55022. This device may cause interference to other equipment in domestic use. In such cases the persons opera- ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost.
.
5 DLR3-XXN/XX T able of contents Overview 7 Package contents 7 Basic functions 7 Features 7 Requirements for operation 7 Control options 7 Connections on the rear 8 Front panel controls 9 Key to contr.
6 DLR3-XXN/XX T able of contents Devices – Camera 34 Devices – Audio 3 5 Devices – Alarm-Out 3 6 Devices – Display 3 7 Devices – Remote Control 3 8 Record – Record 3 9 Record – Schedule .
7 DLR3-XXN/XX Overview Package contents Digital video recorder (DVR) Mains power cord Operating instructions RAS (Remote Administration System) software on CD Operating instructions for RAS software o.
8 DLR3-XXN/XX Connections on the rear Note: Connections optionally for NTSC or P AL operation. AUDIO IN 1 AUDIO IN 2 AUDIO OUT VIDEO IN 1 LOOP1 VIDEO IN 2 LOOP2 VIDEO IN 3 LOOP3 VIDEO IN 4 LOOP4 VIDEO.
9 DLR3-XXN/XX Front panel controls The following diagram and table shows the controls on the front panel of the DVR: PANIC DISPLAY GROUP MENU SEQUENCE CAMEO ALARM CLIP COPY SPOT ZOOM PLAYBACK PTZ 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16 2 3 4 7 6 5 15 14 13 12 8 9 10 1 1 1 No.
10 DLR3-XXN/XX Key to controls Function buttons Note: The secondary function assignment is accessed by holding down the key . Element Function Spot monitor assignments (secondary assignment) Sequence .
1 1 DLR3-XXN/XX The following diagram shows the menu structure: Display Camera 1. CAM1 2. CAM2 3. CAM3 PIP 2x2 3x3 4x4 Previous Group Next Group Edit Group Camera Spot monitor ... Exit Group Edit Sequence Freeze Zoom... PTZ... Speed Auto Pan T our Pattern Device Menu Light Pump Wiper Power Aux.
12 DLR3-XXN/XX The following diagram shows the menu structure: Setup menu... System Information Date/Time Storage User Shutdown... Log out user1... Network Network Notication Devices Camera Audio A.
13 DLR3-XXN/XX Getting started Checklist for DVR operation Step Action Menu path 1 Connect peripheral devices as per planned setup. 2 Specify menu language.. Setup menu... > System > Information 3 Adjust date and time.. Setup menu... > System > Date/Time 4 Set up user .
14 DLR3-XXN/XX Getting started, continued Switching on the DVR Requirement: The start-up preparations are complete. Step Action 1 Plug in DVR mains plug. 2 Switch on monitor . Result: System starts up automatically and is ready to use.. Accessing the Setup menu Requirement: The DVR is switched on.
15 DLR3-XXN/XX Administration Saving your system setup Y ou can save your DVR’s setup data, including its network conguration. Requirement: USB memory stick Step Action Menu path 1 Insert a USB memory stick into one of the USB ports 2 Export your setup.
16 DLR3-XXN/XX Administration, continued Downloading software updates Y ou can download software updates for your DVR from a USB memory stick. Requirement: USB memory stick with latest software release Step Action Menu path 1 Insert a USB memory stick into one of the USB ports.
17 DLR3-XXN/XX Administration, continued Determining the memory requirement of a recording The amount of memory recorded video sequences will take up depends on the following factors: picture quality .
18 DLR3-XXN/XX Searching for recordings Find rst stored recording Search Go to the First… Find last stored recording Search Go to the Last… Find recording by date and time Search Go to the Date/Time.
19 DLR3-XXN/XX Using calendar search Performing a calendar search Step Action Menu path 1 Open calendar search. Result: Calendar and time line are displayed. Search > Calendar Search... 2 Select day and time 3 Conrm input. Go Search Calendar Search.
20 DLR3-XXN/XX Using event log search Performing an event log search Step Action Menu path 1 Open event log search. Result: The result of the last search is displayed. Search > Event Log Search... 2 Dene criteria. Option... 3 Conrm input. Result: List of search results is displayed.
21 DLR3-XXN/XX Using text-in search Performing a text-in search Step Action Menu path 1 Open text-in search. Result: The result of the last search is displayed. Search > T ext-In Search... 2 Dene text inputs. Option... 3 Conrm input. Result: List of search results is displayed.
22 DLR3-XXN/XX Using motion search Performing a motion search Step Action Menu path 1 Display desired camera in single frame. Display > Camera > ... 2 Open motion search. Search > Motion Search... 3 Enter settings for motion search. Option...
23 DLR3-XXN/XX Copying recordings Copying recordings to CD or USB memory stick Step Action Menu path 1 Find desired recordings. Note: Make a note of the data of the recordings you want to copy . Search > ... 2 Dene settings. Search > Clip-Copy .
24 DLR3-XXN/XX Menu descriptions – Setup menu The Setup menu has the following sub-menus: System menu On the “System” menu the basic settings are made users are administered the system is shut down ● ● ● Network menu On the “Network” menu the network settings are made.
25 DLR3-XXN/XX Setup menu System – Information On the “Information” menu basic information is entered and displayed software updates are installed recorded data are deleted as required Setup menu... System Information T erm Symbol Meaning Site Location of DVR System ID ID for remote keypad The remote keypad and DVR must be set to the same ID.
26 DLR3-XXN/XX Setup menu, continued System – Date/Time On the “Date/Time” menu time and date settings are made dates of public holidays are entered time synchronisation is congured.
27 DLR3-XXN/XX Setup menu, continued System – Storage On the “Storage” menu the status and usage of the available storage media is displayed. Setup menu.
28 DLR3-XXN/XX Setup menu, continued Setup menu... System Storage Status T erm Symbol Meaning T ype Memory type Disk Bad Data carrier status T emperature T emperature status S.
29 DLR3-XXN/XX Setup menu, continued System – User On the “User” menu the user groups and individual users are set up. Setup menu... System User T erm Symbol Meaning Group & User , Group eld Assignment of group access privileges T able of possible group access privileges >> Group & User , User eld Set password + Group.
30 DLR3-XXN/XX Setup menu, continued System – Shutdown Setup menu... System Shutdown... System – Log out USER... Setup menu... System Log out USER... Network – Network On the “Network” menu all settings required to ensure network access are made.
31 DLR3-XXN/XX Setup menu, continued Setup menu... Network Network LAN T erm Symbol Meaning T ype T ype of connection to DVR: Manual Manual connection required input of: IP address Gateway Subnet mask.
32 DLR3-XXN/XX Setup menu, continued Setup menu... Network Network DVRNS T erm Symbol Meaning Use DVR Name Service Enables the DVR name service DVRNS Server IP address or domain name of DVRNS server D.
33 DLR3-XXN/XX Setup menu, continued Network – Notication On the “Notify” menu the method of notication is dened. Setup menu... Network Notication Mail T erm Symbol Meaning Enable Enables notication by e-mail SMTP Server IP address of SMTP server Port Port for SMTP server Default is port 25.
34 DLR3-XXN/XX Setup menu, continued Devices – Camera On the “Camera” menu the cameras are congured. Setup menu... Devices Camera Settings T erm Symbol Meaning No.
35 DLR3-XXN/XX Setup menu, continued Devices – Audio On the “Audio” menu the audio outputs are assigned to the cameras. Setup menu... Devices Audio T erm Symbol Meaning No.
36 DLR3-XXN/XX Setup menu, continued Devices – Alarm-Out On the “Alarm-Out” menu the alarm outputs are congured. “Settings” tab: The alarm outputs are congured. “Schedule” tab: T ime slots are dened in which the alarm outputs respond in specic ways.
37 DLR3-XXN/XX Setup menu, continued Devices – Display On the “Display” menu the mode of on-screen display is congured. “OSD” tab: Specify what additional information is displayed on-screen. “Main Monitor” tab: Specify how the camera images are displayed on the main monitor .
38 DLR3-XXN/XX Setup menu, continued Setup menu... Devices Display Main Monitor T erm Symbol Meaning Mode Modes of sequences in multiple playback: Full Sequence All cameras are switched through sequentially .
39 DLR3-XXN/XX Setup menu, continued Record – Record On the “Record” menu the basic settings for recordings and their quality are made. Setup menu... Record Record T erm Symbol Meaning Recycle Enables automatic overwriting of the oldest recordings when the hard disk is full Note: If not enabled, recording ends when the hard disk is full.
40 DLR3-XXN/XX Setup menu, continued Record – Schedule On the “Schedule” menu the schedule for recording is dened. Setup menu... Record Schedule T erm Symbol Meaning Schedule On Enables schedule entries Note: A recording is made only if schedule entries are enabled.
41 DLR3-XXN/XX Setup menu, continued Record – Pre-Event On the “Pre-Event” menu the settings for recording prior to the event are made. Setup menu.
42 DLR3-XXN/XX Setup menu, continued Event – Alarm-In On the “Alarm-In” menu the alarm inputs and responses to events are congured. Setup menu... Event Alarm-In Settings T erm Symbol Meaning No. Enables the alarm inputs Title Name of alarm input T ype Contact method of alarm input: NO Normally Open NC Normally Closed Setup menu.
43 DLR3-XXN/XX Setup menu, continued Setup menu... Event Alarm-In Actions 2 T erm Symbol Meaning No. Number of alarm input PTZ Select PTZ cameras to record in event of alarm and select the desired set.
44 DLR3-XXN/XX Setup menu, continued Event – Motion Detection On the “Motion Detection” menu the motion-sensitive zones are dened and responses to events congured.
45 DLR3-XXN/XX Setup menu, continued Setup menu... Event Motion Detection Actions 1 T erm Symbol Meaning No. Number of alarm input Record Assignment of cameras to record in event of alarm These camera.
46 DLR3-XXN/XX Setup menu, continued Event – Video Loss On the “Video Loss” menu checking for covert cameras and the responses to events are congured. Setup menu... Event Video Loss Settings T erm Symbol Meaning Check Obscuration Sensitivity of check as to whether camera is covert: Never not checked 15 very sensitive Setup menu.
47 DLR3-XXN/XX Setup menu, continued Setup menu... Event Video Loss Actions 2 T erm Symbol Meaning No. Number of covert camera PTZ Select PTZ cameras to record in event of alarm and select the desired.
48 DLR3-XXN/XX Setup menu, continued Event – T ext-In On the “T ext-In” menu the text input device is dened and the responses to text input are congured.
49 DLR3-XXN/XX Setup menu, continued Setup menu... Event T ext-In Actions 1 T erm Symbol Meaning No. Number of alarm input Record Assignment of cameras to record in event of alarm These cameras must b.
50 DLR3-XXN/XX Setup menu, continued Event – System Event On the “System Event” menu the self-diagnostics and corresponding messages are congured. Setup menu... Event System Event Health Check T erm Symbol Meaning System System self-diagnostics interval Check Recording Setup.
51 DLR3-XXN/XX Setup menu, continued Setup menu... Event System Event Actions T erm Symbol Meaning Event Events (based on checks): System System check failed Panic Record Panic recording in progress C.
52 DLR3-XXN/XX Setup menu, continued Event – Event Status The “Event Status” menu indicates the status of all possible events: Grey text: Event detection not enabled White text: Event detection enabled Flashing border: Message – acute event for 5 sec Y ellow eld: Pending event Setup menu.
53 DLR3-XXN/XX Specications DLR3-08N/XX Model DLR3-08N/160CD DLR3-08N/410CD DLR3-08N/660CD EDP no. 71923 71924 71925 Video standard P AL/NTSC (auto detection) Remark - Event logs Unlimited number o.
54 DLR3-XXN/XX Specications DLR3-08N/XX, continued Model DLR3-08N/160CD DLR3-08N/410CD DLR3-08N/660CD Picture size Basic: 2/2.4 KB; Standard: 4/4.8 KB; High: 8/9.
55 DLR3-XXN/XX Specications DLR3-16N/XX Model DLR3-16N/160CD DLR3-16N/410CD DLR3-16N/660CD EDP No. 71926 71927 71928 Video standard P AL/NTSC (auto detection) Remark - Event logs Unlimited number o.
56 DLR3-XXN/XX Specications DLR3-16N/XX, continued Model DLR3-16N/160CD DLR3-16N/410CD DLR3-16N/660CD Picture size Basic: 2/2.4 KB; Standard: 4/4.8 KB; High: 8/9.
57 DLR3-XXN/XX Accessories EDP No. Short description 71857 250GB hard disk for DLR/DXR/DTR and DCR 71919 500GB hard disk for DLR/DXR/DTR and DCR 74088 System keyboard with 3-axis joystick 74092 System.
58 DLR3-XXN/XX Supported PTZ cameras Manufacturer Designation Costar CDC 2500 Dyna Color CDC2400 Chilsung CRD-J6416 Fine CRR-1660s Pelco D-protocol Dennard Dennard2060 T okina DMP-1223 Dongyang Unitec.
59 DLR3-XXN/XX Index A Accessories 57 Alarm Conguring inputs 42 Conguring outputs 36 Connecting inputs 8 Connecting outputs 8 Motion detection 45 Resetting 9 Setting schedule for outputs 36 Sett.
60 DLR3-XXN/XX Index, continued H Health check 50 I IP address 31, 32 L LAN Network conguration 31 M Memory requirement Archiving 17 Recordings 17 Memory type 27 Menu descriptions Search menu 18 Se.
61 DLR3-XXN/XX Index, continued Storage media Displaying status 27 Displaying usage 27 Setting automatic overwrite 39 Switching off 14 Switching on 14 System Exporting conguration 25 Importing con.
62 DLR3-XXN/XX Notes on disposal Correct disposal of this DVR WEEE (W aste Electrical & Electronic Equipment) Applicable in the member states of the European Union and other European coun- tries w.
.
eneo® is a registered trademark of Videor T echnical E. Hartig GmbH Exclusive distribution through specialised trade channels only . VIDEOR TECHNICAL E. Hartig GmbH Carl-Zeiss-Str . 8 · 63322 Rödermark, Germany T el. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100 www .
Ein wichtiger Punkt beim Kauf des Geräts Eneo DLR3-08N/160CD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eneo DLR3-08N/160CD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eneo DLR3-08N/160CD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eneo DLR3-08N/160CD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eneo DLR3-08N/160CD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eneo DLR3-08N/160CD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eneo DLR3-08N/160CD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eneo DLR3-08N/160CD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eneo DLR3-08N/160CD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
