Benutzeranleitung / Produktwartung AWAP803 des Produzenten Alfa Network
Zur Seite of 27
Wireless 802.11ag AP User’s Manual Version 1.1 0.
1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interferen ce in a residential installation.
Copyright Statement No part of this publication may be reprodu ced, stored in a retrieval system, or transmitted in any form or by any me ans, whether electronic, mechanical, photocopying, recording, or ot herwise without the prior writ ing of the publisher.
Contents 1.Introduction................ ................................... ................................ .............................. .4 2.SafetyNotification..... ..................................................................................
1. Introduction Thank you for purchasing your Wireless 802.11ag AP. This user guide will assist you with the installation procedure. The package you have received should contain the following items: Wireless 802.
2. Safety Notification Your Wireless AP should be placed in a safe and secure location. To ensure proper operation, please keep the unit aw ay from water and other damaging elements. Please read the user manual tho roughly before you install the device.
3. Hardware Installation Front Panel The front panel provides LED’s for device status. Refer to the following table for the meaning of each feature. Power The Power LED lights up and w ill keep while the AP is powered on. When the AP goes through its self-diagnostic mode during every boot-up, this LED will flash.
Rear Panel The rear panel features 1 Ethernet port, Re set button and Power port. Refer to the following table for th e meaning of each feature. RESET Button The RESET button can restore device to factory default settings by press this button for approx.
8 Ethernet Power Hardware Installation for Connecti on to Your local network 1. Power off your network devices. 2. Locate an optimum location for the AP. The best place for the AP is usually at the center of your wireless network, with line of sight to all of your wireless devices.
9 4. How to Configuring the Dual Band AP TURN ON POWER SUPPLY Quick power cycle would caused syst em corruption. When power on, be careful not to shut down in about 5 seconds, because data is writing to the flash. START UP & LOGIN In order to configure the Wireless 11ag AP, you must use web browser and manually input http://192.
10 4.1 Setup – Network Setup MAKE CORRECT NETWORK SE TTINGS OF YOUR COMPUTER To change the configuration, use Internet Explorer (IE) or Ne tscape Communicator to connect the WEB management 192.168.1.250 This following screen contains all of the AP's basic setup functions.
4.2 Wireless – Wireless Settings Wireless Settings Enable L2 isolation: Enable this checkbox can is olate each wireless c lient which associated this AP. Wireless-A Settings If you are using a Wireless-A netwo rk, then the following settings t hat you may need to configure.
Change these settings as described here and click the Apply button to apply your changes or click Cancel button to cancel your changes. For additional information, click Help .
13 4.3 Wireless – Wireless Mode There are 3 operating modes in each A,B/G band, usi ng the following setting can perform each function. Wireless-A Settings Access Point: This mode provides access for wireless stat ions to wired LANs and from wired LANs to wireless stations.
14 4.4 Wireless MAC Filter This function allows administrator to have access control by enter MAC address of wireless devices which transmitting within your wireless network. Wireless-A Setting Access Control List Mode: This drop-down menu can set Enable/Disable the ACL function.
15 4.5 Wireless – Wireless Security The Wireless Security settings configure the security of your wireless network . There are three wireless security mode options supported by the AP: WEP (Wired E quivalent Privacy), W PA Pre-Shared Key, WPA RADIUS.
16 4.6 Wireless – Advanced Wireless Settings This section provides AP’s advanced wireless settings . These settings should be adjusted carefully. Any improper settings will affect t he AP’s wireless performance.
17 Wireless-B/G Settings Authentication Type : Open System: This is default setting, those wireless client s that NOT use a WEP key for authentication. Shared Key: This option means the wireless clients use a WEP key for authenticatio n. Shared Key is only available if the WEP option is im plemented.
Change these settings as described here and click the Apply button to apply your changes or click Cancel to cancel your changes. For additional information, click Help .
19 4.7 Administration – Management This section allows the network’s administrator to manage specific AP f unctions for access and security. Management UserName: The login username, default value is blank(null). Password: The login password, default value is admin.
20 4.8 Administration – Reboot AP AP Reboot: Click this button to initialize this device..
21 4.9 Administration – Firmware Upgrade This Firmware Upgrade screen allows you to upgrade the AP’s firmware. Do not upgrade the firmware unless you are experiencing problems with the AP or the new firmware has a feature you want to use.
22 4.10 Administration – Factory Defaults This Factory Defaults allows you to restore the AP’s configuration to its factory default settings. Factory Defaults Restore Factory Defaults : Click this button to reset all configuration settings to their default values.
23 4.11 Status – Local Network The Local Network screen on the Status Tab displays the status of your network. Identity Device Name: The device name for user identification. Firmware Version : The current AP firmware version display here. Local Area Network Local MAC Address : This is the AP’s local physical MAC Address.
24 4.12 Status – Wireless Network The Wireless Network screen on the Stat us Tab displays the informati on of your Wireless networks. Wireless Settings Wireless-A Settings MAC Address : This is the AP’s Wireless-A band MAC Address. Mode : This mode is displaying the current status of Wireless-A band network.
25 4.13 Status – Wireless Statistics Wireless Statistics: This displays the AP and stations that are currently pa rt of the BSS..
26 5. Troubleshooting – Q & A 1. I’m trying to log on the AP’s Web confi guration page, but I do not see the login screen. Answer: 1. Please make sure the IP address that you i nput on address field of IE browser is correct. 2. Make sure the physical layer connection is established.
Ein wichtiger Punkt beim Kauf des Geräts Alfa Network AWAP803 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alfa Network AWAP803 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alfa Network AWAP803 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alfa Network AWAP803 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alfa Network AWAP803 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alfa Network AWAP803 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alfa Network AWAP803 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alfa Network AWAP803. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alfa Network AWAP803 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
