Benutzeranleitung / Produktwartung MVME2500 des Produzenten Emerson
Zur Seite of 146
Embedded Computing f or Busine ss-Critical Con tinuit y TM MVME2500 Installation and U se P/N: 6806800L01H January 2014.
© 2014 Emerson All rights reserved. T rade marks Emerson, Busine ss-Critical Continuity , Emerson Ne t work Po wer an d the Eme rson Network Power logo are trade marks and se r vice marks of Eme rson Electric Co. © 2014 Emerson Electric Co. All o ther product or service names are the propert y of the ir respective owners.
Contents MVME2500 Installation and Use (6806800L01H) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 Introduction . . . . . . . . . .
MVME2500 Installation and Use (6806800L01H) Contents 4 Contents Contents 3.4.1.3 USB Connector (J5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.4.1.4 VMEBus P1 Connector . . . . . . . . . . .
Contents MVME2500 Installation and Use (6806800L01H) 5 4.4.1 Real Time Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 4.4.2 Internal Timer . . . . . . . . . . . . . .
MVME2500 Installation and Use (6806800L01H) Contents 6 Contents Contents 5 Memory Maps and Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 5.1 Overview . . . . . . . . .
Contents MVME2500 Installation and Use (6806800L01H) 7 6.3.2 Booting from an Optional SATA Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 6.3.3 Booting from a USB Drive . . . . . . . . . . . . . . . . . .
MVME2500 Installation and Use (6806800L01H) Contents 8 Contents Contents Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Sicherheitshinweise .
List of T ables MVME2500 Installation and Use (6806800L01H) 9 T able 1-1 K ey Fe atures of the MVME2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 T able 1-2 Board S tandard Compli ances . . . . . .
MVME2500 Installation and Use (6806800L01H) 10 List of Tables T able 5-6 PLD Month R egister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 T able 5-7 PLD Da y Regist er . . . . . .
List of Figure s MVME2500 Installation and Use (6806800L01H) 11 Figure 1-1 Seri al Number L ocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 3-1 Compone nt Lay out . . . . . . . . . .
MVME2500 Installation and Use (6806800L01H) 12 List of Figures.
MVME2500 Installation and Use (6806800L01H) 13 About this Manual Overview of Contents This manu al is divided into the f ollowing chap ters and appendic es. Introduction giv es an ove r view of the f ea tures of the product, standard c omplianc es, mechanical d ata, and ordering in form ation.
MVME2500 Installation and Use (6806800L01H) About this Manual 14 About this Manual DUAR T Dual U ART EEPROM Erasable Programmable R ead-Only Memor y FCC Fede ral Communications C ommission GB GigaBy t.
About this Manual MVME2500 Installation and Use (6806800L01H) 15 Conv entions The follo wing table describes the c onven tions used throughout this manual.
MVME2500 Installation and Use (6806800L01H) About this Manual 16 About this Manual | Logical OR Indicates a h azardous situa tion which, if not a voided, could re sult in death or se rious injur y Ind.
About this Manual MVME2500 Installation and Use (6806800L01H) 17 Summar y of Changes This manu al has bee n revised and replac es all prior editions. Part Number Publication D ate Description 6806800L01A June 2010 First edition 6806800L01B October 2010 This ve rsion includes updat es and revisions for the EA relea se of the MVME2500.
MVME2500 Installation and Use (6806800L01H) About this Manual 18 About this Manual 6806800L01E July 2011 Updat ed T able "Available Boar d Vari ants" on page 22 . Updat ed Appendix B, Re lated Docume nta tion, on pag e 129 . 6806800L01F August 2011 Changed title o f Section 3.
Chapter 1 MVME2500 Installation and Use (6806800L01H) 19 Introduc tion 1.1 Overview The MVME2500 is a VMEbus bo ard ba sed on the F reescale QorlQ P2010 (single-c ore) or P2020 (dual-core) proc essor . It has a 6U f orm-fac tor and h as an expansion slo t for an option al PCI Mezzanine Card (PMC) or PCI eXpress Mezzanine Car d (XMC).
Introduction MVME2500 Installation and Use (6806800L01H ) 20 F ront pane l I/O Micro DB9 RS -232 seri al console por t USB 2.0 T wo RJ45 10/100/1000BASE - T Ethernet Re set/Abor t swit.
Introduction MVME2500 Installation and Use (6806800L01H) 21 1.2 Standard Complianc es The product is designed to meet the f ollowing stan dar ds. Re sults are pending until testing is finished. For Dec laration o f Conf ormit y , refe r MVME2500 Serie s Declara tion of Con formit y .
Introduction MVME2500 Installation and Use (6806800L01H ) 22 1.3 Mechanical D ata The follo wing table provides details ab out the dime nsions and weight o f the board. 1.4 Ordering Information As of the printing da te of this m anual, this guide supports the models listed belo w .
Introduction MVME2500 Installation and Use (6806800L01H) 23 As of the printing da te of this m anual, the f ollowing board acce ssories are a vailable .
Introduction MVME2500 Installation and Use (6806800L01H ) 24 1.5 Produc t Identification The follo wing graphics shows the location of the s eri al number la bel.
Chapter 2 MVME2500 Installation and Use (6806800L01H) 25 Hardware Prep aration and Installation 2.1 Overview This chap ter provide s installation and saf et y instruc tions for this product. Installation instruc tions f or the option al PMC and transition module are also included.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 26 2.2 Unpacking and Inspecting the Board Re ad all notices and cautions prior to unpacking the product. Shipment Inspection 1. V erif y tha t you hav e receiv ed all items o f your shipmen t.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 27 2.3.1 Environmental Requirements Opera ting tempe ratures ref er to the te mpera ture of the air circ ulating around the boar d and not to the c omponent te mperature .
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 28 2.3.2 Pow er Requirements The board u ses +5.0 V from the VMEbus backpl ane. On bo ard powe r supply genera tes the required voltages f or the various ICs. The MVME2500 connects the +12 V and -12 V supplies from the backplane to the PMC sit es, while the +3.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 29 The follo wing table shows the powe r available whe n the MVME2500 is installed in eithe r a three row or five ro w cha ssis and when PMCs are prese nt.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 30 2.5 Installing Acc essories 2.5.1 Rear T ransition Module The MVME2500 does not support hot swap . R emov e power t o the rear slo t or system be fore installing the module.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 31 4. Install the top and bott om edge of the transiti on module into the re ar guides of the cha ssis. 5. Ensure tha t the leve r s of the two injector/ejectors are in the out ward position.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 32 1. Attach an ESD strap t o your wrist. A ttach the othe r end of the strap to the c ha ssis as a ground. Mak e sure that it is secure ly f aste ned throughout the procedure.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 33 1. Attach an ESD strap to y our wrist. Attach the othe r end o f the strap to an electrical ground. Mak e sure that it is securely f aste ned throughout the procedure.
Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 34 2.7 Completing the Installation The board is de signed to opera te as an application-specific c omputer bl ade or an inte lligent I/O board/carrie r . It can be used in any slo t in a VME chas sis.
Chapter 3 MVME2500 Installation and Use (6806800L01H) 35 Controls, LEDs, and Connectors 3.1 Board Lay out The follo wing figure shows the compone nts and connectors on the MVME2500.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 36 3.2 F ront Panel The follo wing compone nts are f ound on the MVME2500 front pane l.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 37 3.2.1 Re set S witch The MVME2500 ha s a single push butt on switch th at ha s both the abor t and reset functions. Pressing the swit ch for le ss than three seconds ge nerate s an abor t inte rr up t to the P20x0 QorIQ PIC.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 38 T ab le 3-1 Fron t Panel LEDs Label Function Loca tion Color Description USER 1 User Defined F ront pane l Off Y ellow Red By default Use r Soft ware Con trollable. R efe r to the "Use r LED Registe r .
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 39 3.3.2 Onboard LEDs The onboard LEDs are list ed below . T o view its loca tion on the board, see Figure 3-1 on page 35 . 3.4 Connector s This section describes the pin a ssignmen ts and signals for the c onnectors on the MVME2500.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 40 3.4.1 Front P anel Connec tors The follo wing connectors are found on the outside o f the MVME2500. These c onnectors are divided between the front pane l connectors and the backplane connectors.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 41 3.4.1.2 Front Panel Serial Port (J4) There is one fron t acces s asynchronou s serial port interface tha t is routed to the micro mini DB - 9 front pane l connector .
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 42 3.4.1.3 USB Connector (J5) The MVME2500 use s upright USB rec ep t able mounted in the fron t panel. 3.4.1.4 VMEBus P1 Connector The VME P1 connector is a 160-pin DIN. The P1 c onnec tor provides po wer and VME signals f or 24-bit address and 16-bit d ata.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 43 10 SYSCLK BGIN3 SYSF AIL GA0 GND 11 GND BGOUT3 BERR GA1 NC 12 DS1 BR0 SYSRESE T +3.3V (not u sed) GND 13 DS0 BR1 L WORD GA2 NC 14 WRITE BR2 AM 5 +3.3V (no t used) GND 15 GND BR3 ADD 23 GA3 NC 16 D T ACK AM 0 ADD 24 +3.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 44 3.4.1.5 VMEBus P2 Connector The VME P2 connector is a 160-pin DIN. R ow B of the P2 c onnector provides powe r to the MVME2500 and to the uppe r eight VMEbu s address lines and additional 16 VMEbu s data lines.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 45 3.4.2 O nboard Connector s 3.4.2.1 Flash Program Connector (P7) The Fla sh Program Connector is depopul ated in the production ve rsion of the MVME2500. Howe ve r , eac h pin is exposed f or the 60-pin header c onnec tor f or the JT AG bound ar y scan.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 46 3.4.2.2 SATA Connector (J3) The onboard c ustomi zed S A T A connector is compatible with the Eme r son SA T A kit, name ly VME-64G BS SDKIT and IVME7210-MNTKIT .
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 47 3.4.2.3 PMC Connectors The MVME2500 suppor ts only one PMC site . It utilizes J14 t o suppor t PMC I/O tha t goes to the RTM PMC. The tables be low show the pinout detail of J11, J12, J13 and J14.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 48 18 +5V 50 +5V 19 +3.3V 51 GND 20 AD 31 52 CBE0 21 AD 28 53 AD 6 22 AD 27 54 AD 5 23 AD 25 55 AD 4 24 GND 56 GND 25 GND 57 +3.3V 26 CBE3 58 AD 3 27 AD 22 59 AD 2 28 AD 21 60 AD 1 29 AD 19 61 AD 0 30 +5V 62 +5V 31 +3.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 49 10 NC 42 SERR 11 BUSMODE2 (Pulled UP) 43 CBE1 12 +3.3V 44 GND 13 PCI RESE T 45 AD 14 14 BUSMODE3 (PULLED D WN) 46 AD 13 15 +3.3V 47 M66EN 16 BUSMODE4 (PULLED D WN) 48 AD 10 17 NC 49 AD 8 18 GND 50 +3.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 50 2 GND 34 AD48 3 GND 35 AD 47 4 CBE7 36 AD 52 5 CBE6 37 AD 45 6C B E 5 3 8 G N D 7 CBE4 39 +3.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 51 29 AD 51 61 NC 30 AD 50 62 GND 31 AD 49 63 GND 32 GND 64 NC T ab le 3-13 PMC J14 C onnector Pin Signal Descrip tion Pin Si.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 52 3.4.2.4 JTAG Connector (P6) The JT A G Connec tor can be u sed in conjunction with the JT A G board and ASSET hardw are.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 53 19 GPO0 20 NC 21 NC 22 SC AN 2 TMS 23 NC 24 SC AN 2 TDO 25 SCAN 2 TCK 26 +3.3V FROM +5V 27 GND 28 SCAN 2 TDI 29 NC 30 NC 31 SCAN 3 TMS 32 SCAN 3 TCK1 33 SCAN 3 TDO 34 SCAN 3 TCK 2 35 +2.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 54 3.4.2.5 COP Connector (P6) The C OP heade r is used f or the CPU debug. The pin as signmen t is dic tated b y Freescale and is compa tible with the processor’s de bugging tool.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 55 3.4.2.7 XMC Connector (XJ2) The MVME2500 ha s one XMC connec tor (XJ2) th at suppor ts XMC cards with J15 c onnec tor . It can also suppor t XMC cards with J16 c onnec tor without e ncoun tering an y mechanical int er feren ce.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 56 3.4.2.8 Miscellaneous P2020 Debug Connectors 9 NC NC NC NC NC +3.3V 10 GND GND JT A G TDO GND GND GA 0 11 TX0 TX0 - BIST (PULLED UP) TX1 + TX1 - +3.3V 12 GND GND GA 1 GND G ND PRESENT 13 NC NC NC NC NC +3.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 57 3.5 S witches These switc hes control the c onfiguration of the MVME2500. 3.5.1 Geographical Address S witch (S1) The T si148 VMEbus S t atu s Regist er pro vides the VMEbu s geographical address of the MVM2500.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 58 Note th at this switch is wired in paralle l with the geographical address pins on the 5-row connector . Thes e switches must be in the "OFF" po sition when installed in a 5-row c ha ssis in orde r to get the c orrec t address from the P1 c onnec tor .
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 59 3.5.2 SMT Configuration S witch (S2) This eight po sition SMT configura tion switch c ontrols the flash bank writ e-protect, selects the fla sh boot image , and controls the sa fe star t ENV settings.
Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 60 6 OFF (WP Enabled) MA STER_WP_DIS A BLED Writ e-Protect Disable switch For I2C write-pro tec t only .
Chapter 4 MVME2500 Installation and Use (6806800L01H) 61 F unctional Description 4.1 Block Diagr am The MVME2500 block diagram is illu strated in Figure 4-1 .
Functional Description MVME2500 Installation and Use (6806800L01H ) 62 This section describes the prot ocol and in terf aces pro vided in the QorIQ P20x0 integrated and is utiliz ed by the MVME2500. 4.2.1 e500 Processor Core The QorIQ integra ted proc essors off er dual high pe r form ance e500v2 core (P2020) and a single e500v2 core (P2010).
Functional Description MVME2500 Installation and Use (6806800L01H) 63 Autom atic DRAM initialization s equenc e or soft ware-controlled initi alization sequenc e and automa tic DRAM data initialization. W rite leve ling for DDR3 memorie s and suppor ts up to e ight posted re freshes.
Functional Description MVME2500 Installation and Use (6806800L01H ) 64 4.2.8 DU ART The chipse t provides t wo univ ersal asynchronou s receiv er/transmitt er (U ART), each o f which acts independe ntly of the o ther . Each U ART is clock ed by the CCB clock and is c ompatible with PC16522D.
Functional Description MVME2500 Installation and Use (6806800L01H) 65 4.2.13 Common On-Chip Processor (C OP) The C OP is the debug int erface of the QorIQ P20x0 Proc essor . It allows a remo te compute r syste m to acce ss and c ontrol the int ern al opera tion of the proce ssor .
Functional Description MVME2500 Installation and Use (6806800L01H ) 66 See Re al- Time Clock Batt ery , on page 77 for more inf ormation on the re al time clock back -up batte r y . 4.4.2 Internal Timer The proces sor's intern al timer is compos ed of ei ght global timers divided into two groups of four time r s ea ch.
Functional Description MVME2500 Installation and Use (6806800L01H) 67 4.6 SPI Bus Int er fac e The enh anced seri al periphe ral interface (eSPI) allo ws the device t o exchange d ata with periphe ral devices such a s EEPROMs, R T C, Flash and the lik e.
Functional Description MVME2500 Installation and Use (6806800L01H ) 68 F actor y Pre-Programming - Programming the SPI Fla sh usually take s a while. Ideally , the SPI Fl ash should be pre-programmed in the factor y bef ore shipment. IC T Programming - This programming is done on expos ed test poin ts using a bed of n ails tester .
Functional Description MVME2500 Installation and Use (6806800L01H) 69 The MVME2500 FPGA con trols the chip se lec t to SPI de vices A and B. The FPGA c hip select con trol is based on the S witch Bank (S2-2). At pow er -up, the s election of the SPI boo t devic e is stric tly ba sed upon the Swit ch Bank (S2-2) setting.
Functional Description MVME2500 Installation and Use (6806800L01H ) 70 The MVME2500 suppor ts autom atic switch ov er . If booting one devic e is not succes sful, the watc hdog will trigger the board rese t and it will automatically boo t on the othe r device .
Functional Description MVME2500 Installation and Use (6806800L01H) 71 Only 115200 bps and 9600 bps are supported. The default baud ra te on the front pane l serial is 9600 kbps. 4.8 R ear U ART Control The MVME2500 utiliz es the Exar ST16C554 quad U ART (QUAR T) to provide four addition al por ts to the R TM.
Functional Description MVME2500 Installation and Use (6806800L01H ) 72 PMC/XMC sites are k eyed f or 3.3V PMC signaling. PMC and XMC add-on cards must h ave a hole in the 3.
Functional Description MVME2500 Installation and Use (6806800L01H) 73 The MVME2500 use s Mar ve ll's 88SE6121B2-NA A2C000 SA T A c ontrolle r and suppor ts up to 1.5 Gbps (SA T A Gen 1). F or status indica tors, it ha s an onboard gree n LED, D12 and D13 f or SA T A link and SA T A ac tivit y statu s respective ly .
Functional Description MVME2500 Installation and Use (6806800L01H ) 74 The RTM I2C ad dress can be c onfigured by the u ser and should not c ontain duplicate addresse s to av oid conflict. For more inf ormation, see I2C Bu s Device Addres sing, on pa ge 118 .
Functional Description MVME2500 Installation and Use (6806800L01H) 75 4.15.2 Po wer Up Sequencing R equirements The powe r up sequence des cribes the voltage rail pow er up timing, which is de signed to suppor t all the chip supply v oltage sequencing require m e nt.
Functional Description MVME2500 Installation and Use (6806800L01H ) 76 4.16 Clock S truc ture A total o f three ID T chips, a discre te osc illat or and cr yst al to support all the clock requiremen ts of MVME2500. 4.17 R eset S truc ture MVME2500 rese t will initiat e after the powe r up sequence if the 1.
Functional Description MVME2500 Installation and Use (6806800L01H) 77 4.17.1 Re set Sequence The timing of the rese t sequence supports each chip re set require ments with re spect to the powe r supply .
Functional Description MVME2500 Installation and Use (6806800L01H ) 78 4.20 Debugging Suppor t The follo wing inf ormation sho ws the details of Eme r son de bugging suppor t as applied to the MVME2500. 4.20.1 POST Co de Indicator The follo wing table shows the LED status o f the P OST C odes.
Functional Description MVME2500 Installation and Use (6806800L01H) 79 The JT A G board provides three diff erent c onnec tors for the ASSET hardware , flash programming and the MVME2500 JT A G connector . The board is equipped with T TL buff ers to help impro ve the sign al qualit y as it trav erses ove r the wires.
Functional Description MVME2500 Installation and Use (6806800L01H ) 80.
Chapter 5 MVME2500 Installation and Use (6806800L01H) 81 Memor y Maps and R egisters 5.1 Overview System re sources including syste m control and statu s registers, external time r s, and the QUAR T are mapped into 16 MB a ddress range acc essible from the MVME2500 local bus through the P20x0 QorIQ LBC.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 82 5.3 Flash Memor y Map The table below lists the me mor y range designated t o U -boot and ENV variable s. 5.4 Linux De vice s Memor y Map The table below lists the me mor y ranges designat ed to diffe rent devic es in Linux.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 83 FPGA 0xffdf0000 0xffdf0fff 4 KB ecm local acces s window CCSR 0xffe00000 0xff e00ffff 4 KB ecm (Error Correction Module) CCSR 0.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 84 5.5 Programmable Logic De vice (PLD) R egisters 5.5.1 PLD R evision Regist er The MVME2500 provides a PLD re vision register th at can be read by the syst em so f t ware t o dete rmine the current v ersion of the timers/registers PLD .
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 85 5.5.3 PLD Month Register The MVME2500 PLD provide s an 8-bit register whic h contains the build month of the timers/registe rs PLD. 5.5.4 PLD Da y Register MVME2500 PLD provides an 8-bit regist er which c o ntains the build day o f the timers/registers PLD.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 86 5.5.6 PLD Po wer Good Monit or Regist er The MVME2500 PLD provides an 8-bit regist er which indica tes the instantaneous statu s of the supply’s power good si gnals.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 87 5.5.7 PLD LED Control R egister The MVME2500 PLD provide s an 8-bit registe r which con trols the eight LEDs.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 88 5.5.8 PLD PCI/PMC/XMC Monitor R egister The MVME2500 PLD provides an 8-bit regist er whic h indica tes the status o f the PCI/PMC/XMC inte r face sign als.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 89 5.5.9 PLD U -Boot and TSI Monitor R egister The MVME2500 PLD provide s an 8-bit registe r which indicate s the st atu s of the U -Boot's normal e nvironme nt switc h and TSI in te r face si gnals.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 90 Field SPI_GOODR eg (write 0xA4 int o this reg to indicate succ essful loading of the U- Boot.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 91 5.5.11 PLD W rite Protect and I2C Debug Regist er The MVME2500 PLD provide s an 8-bit register whic h is used to indicat e the status o f I2C and SPI write-pro tec t manu al switches and is us ed to con trol the SPI write-en able.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 92 I2C_DEBUG_EN I2C debug por ts (I2C_1_D and I2C_1_C) en able 1 - Drive En abled 0 - Drive Disabled SERIAL_FLASH_WP SPI devic es.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 93 5.5.12 PLD T est R egister 1 The MVME2500 PLD provide s an 8-bit gene ral purpose read/write regist er which can be u sed by the so f t ware f or PLD testing or gene ral status bit st orage.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 94 5.5.14 PLD GPIO2 Int errupt Registe r The Abor t switch , Tick Timer 0, 1 and 2 inte rr up ts are ORed t ogethe r . The MVME2500 provides an inte rrupt register th at the syste m sof t ware re ads to det ermine whic h device the in terrupt originat ed from.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 95 5.5.15 PLD Shutdo wn and Reset Control and R eset Reason R egister The MVME2500 provides an 8-b it register t o execut e the shutdown and re set commands. The board's re set re ason is also inc luded in this register .
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 96 5.5.16 PLD W atc hdog T imer R efresh R egister The MVME2500 provides a w atchdog time r refresh registe r .
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 97 5.5.17 PLD W atc hdog Control Register The MVME2500 provides a w atchdog c ontrol register . 5.5.18 PLD W atc hdog T imer Count R egister The MVME2500 provides a w atchdog time r count regist er .
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 98 5.6 Ex te rnal Timer Regist ers The MVME2500 provides a s et of tick time r registers to acce ss the three extern al timers impleme nted in the timers/registe rs PLD. These regist ers are 32-bit and are word writable .
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 99 5.6.2 Control R egisters T ab le 5-23 Con trol R egiste rs REG Tick Timer 0 Con trol Regist er - 0xFFC80202 Tick Timer 1 Con tr.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 100 5.6.3 Compare High and Low W ord Regist ers The tick timer c ounter is c ompared to the Compare R egister . Whe n the values are equal, the tick timer in terrup t is asserted and the ove r flow coun te r increme nts.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 101 5.6.4 Counter High and Lo w W ord Regist ers When e nabled, the tick timer c ounte r register incr eme nts eve r y microsec ond. Sof t ware ma y read or writ e the coun ter a t any time.
Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 102.
Chapter 6 MVME2500 Installation and Use (6806800L01H) 103 Boot System 6.1 Overview The MVME2500 use s Das U-Boot, a boot loade r soft ware based on the GNU Public Lic ense . It boots the bl ade and is the first sof t ware t o be execut ed after the syste m is powe red on.
Boot System MVME2500 Installation and Use (6806800L01H ) 104 U -Boot aborts the boot sequenc e and ente r s int o a comm and line inte r face mode . 6.
Boot System MVME2500 Installation and Use (6806800L01H) 105 6.3.2 Booting from an Optional SA T A Drive 1. Mak e sure that the kernel, dtb, and ramdisk are saved in the S A T A drive with ext2 par tition.
Boot System MVME2500 Installation and Use (6806800L01H ) 106 6.3.4 Booting from an SD Card 1. Mak e sure that the kernel, dtb , and ramdisk are sav ed in the SD card with F A T par tition.
Boot System MVME2500 Installation and Use (6806800L01H) 107 3. TF TP the files from the s er ve r to local memor y , then boo t: run vxboot 6.4 Using the P er sistent Memor y F eature Pe rsistent me mor y means that the RAM's me mor y is not delet ed during a reset.
Boot System MVME2500 Installation and Use (6806800L01H ) 108 6.5 MVME2500 Specific U-Boot Commands T ab le 6-1 MVME2500 S pecific U-Boot C ommands Command De scription base Print or set addres s offset bdinf o Print board inf o structure boot Boot def ault, i.
Boot System MVME2500 Installation and Use (6806800L01H) 109 help Print online help i2c I2C sub-system iminf o Print he ader inf ormation f or application image imxtrac t Ex tract a part of a multi-ima.
Boot System MVME2500 Installation and Use (6806800L01H ) 110 6.6 Updating U -Boot T o upd ate the U-Boot, plac e the image in the RAM (addres s 0x1000000 in this example) bef ore cop ying it to the SPI fla sh. The follo wing procedure will re place the im age in SPI bank 0: 1.
Boot System MVME2500 Installation and Use (6806800L01H) 111 sf probe 0 4. Eras e 0x90000 bytes star ting at SPI addres s 0: sf erase 0 0x90000 5. W rite 0x90000 bytes from RAM address 0x1000000 starti.
Boot System MVME2500 Installation and Use (6806800L01H ) 112.
Chapter 7 MVME2500 Installation and Use (6806800L01H) 113 Programming Model 7.1 Overview This chap ter includes addition al pr ogramming inform ation f or the MVME2500. 7.2 R eset Configur ation The MVME2500 suppor ts the pow er -on reset (POR) pin sampling me thod for proc essor reset con figuration.
Programming Model MVME2500 Installation and Use (6806800L01H ) 114 6 Boot Sequenc e LGPL3/LFWP , L GPL5 11 CFG_BOO T_SEQ[1:0] = BOO T SEQUENCE DISABLED 7 Memor y Debug Confi g DMA2_D ACK0 1 De bug inf.
Programming Model MVME2500 Installation and Use (6806800L01H) 115 18 ETSEC2 SG MII Mode L GPL1 1 eTSE C2 Ethernet inte r face opera tes in standard paralle l inte r face mode and use s the TSE C_2’pins (default).
Programming Model MVME2500 Installation and Use (6806800L01H ) 116 24 BOO T ROM Location TSE C1_TXD[6:4], TSE C1_TX_ER 011X On-chip boot ROM-SPI con figuration (x=0), SDHC (x=1) 25 Host/Age nt Confi g L WE1/LBS1, LA[18:19] 111 The processor acts as the host/root c omplex for all PCI-E/Serial Rapid IO inte r faces (def ault).
Programming Model MVME2500 Installation and Use (6806800L01H) 117 7.3 Interrup t Controller The MVME2500 use s the MPC8548E integrated programm able inte rr upt c ontroller (PIC) to man age locally gene rated inte rrupts.
Programming Model MVME2500 Installation and Use (6806800L01H ) 118 7.4 I2C Bus De vice A ddressing The follo wing table contains the I2C devic es used f or the MVME2500 and its assigned devic e address. 1. This is a dual addres s seri al EEPROM. 2. The RTM Bu s address can be manually c hanged through the S1 S witch on RTM.
Programming Model MVME2500 Installation and Use (6806800L01H) 119 7.6 Other Sof t ware Consider ations This section provides programming inf ormation in rel ation to various boar d components. 7.6.1 MRAM The MVME2500 provides 512 K b y tes of fa st, non -vola tile storage in the form of Magne toresistiv e Random Acc ess Me mor y (MRAM).
Programming Model MVME2500 Installation and Use (6806800L01H ) 120 7.6.4 LBC T iming Par ameters The follo wing table defines the timing parame ters for the devic es on the local bus.
Programming Model MVME2500 Installation and Use (6806800L01H) 121 7.7 Clock Distribution The clock function genera tes and distributes all of the c locks required for system ope ration. The ICS9FG108 is us ed to gene rate all the required PCI-E clocks.
Programming Model MVME2500 Installation and Use (6806800L01H ) 122 7.7.1 System Clock The syste m and DDR clock is drive n by ICS840S07I. The following table de fines the clock frequency .
Programming Model MVME2500 Installation and Use (6806800L01H) 123 7.7.2 Real Time Clock Input The RT C clock input is driv en by a 1 MHz clock ge nerated b y the FP GA. This provides a fixed clock ref erenc e for the QorIQ P20x0 PIC timers which the so f t ware can u se as a kno wn time ref ere nce .
Programming Model MVME2500 Installation and Use (6806800L01H ) 124.
Appendix A MVME2500 Installation and Use (6806800L01H) 125 A R eplacing the Batt er y A .1 R eplacing the Batter y The figure belo w shows the location o f the board batte r y .
Replacing the Battery MVME2500 Installation and Use (6806800L01H ) 126 The batte r y provides seve n years of d ata rete ntion, summing up all periods of actual da t a use . Emerson the ref ore assume s that there is u sually no need to repl ace the ba ttery exce pt, for example , in case o f long -term s pare par t handling.
Replacing the Battery MVME2500 Installation and Use (6806800L01H) 127 Replacement Procedure T o re place the batte r y , proceed as f ollows: 1. R emo ve the old batt er y .
Replacing the Battery MVME2500 Installation and Use (6806800L01H ) 128.
Appendix B MVME2500 Installation and Use (6806800L01H) 129 B R elated Documentation B.1 Emer son Net w ork Po we r - Embedded Computing Documents The publications listed be low are refe renc ed in this manual.
Related Documentation MVME2500 Installation and Use (6806800L01H ) 130 B.2 Manu facturer s ’ Documents For ad ditional inf ormation, ref er to the f ollowing table for m anufac turers ’ data sheets or u ser manu als. As an additional help , a source for the list ed documen t is provided.
Related Documentation MVME2500 Installation and Use (6806800L01H) 131 IEEE IEEE 802.3 LAN/MAN CSMA/CD Acces s Method IEEE 802.3-2005 IEEE Stand ard for a C ommon Mezzanine Card (CMC) F amily IEEE Std 1386-2001 IEEE Standar d Physical and Environmen tal Laye rs for PCI Mezzanine Cards (PMC) IEEE St d 1386.
Related Documentation MVME2500 Installation and Use (6806800L01H ) 132.
MVME2500 Installation and Use (6806800L01H) 133 Safe t y Note s This section provides warnings th at precede pot en tially dange rous procedures throughout this manu al. Instruc tions con t ained in the warning s must be f ollowed during all pha ses of opera tion, service, and re pair of this equipment.
MVME2500 Installation and Use (6806800L01H) Safety Notes 134 Opera tion of this equipme nt in a reside nti al area is lik ely to cau se harmful in terfe renc e in which case the u ser will be required to c orrec t the inte r fe rence a t his own expens e.
Safety Notes MVME2500 Installation and Use (6806800L01H) 135 Mak e sure all sof t ware is c omplete ly shut down before re moving powe r from the board or remo ving the board from the c has sis. Product Dam age Only use in jector handles f or board insertion to avoid d amage to the front p anel and/or PCB.
MVME2500 Installation and Use (6806800L01H) Safety Notes 136 Batter y Board/Syst em Dam age Incorrect exch ange of lithium batte ries can result in a h azardou s explosion. When ex changing the on-board lithium batte r y , make sure th at the new and the old batte r y are exac tly the same batte r y models.
MVME2500 Installation and Use (6806800L01H) 137 Sicherheitshinw eise Dieses K apitel e nthält Hinweise , die pote ntiell ge fährlichen Pro zedure n innerhalb diese s Handbuchs v orrangestellt sind.
MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 138 EMV Da s Produkt wurde in einem Eme r son S t andar dsystem ge testet. Es erfüllt die für digitale Gerät e der Kla sse A gültigen Gre nzwe r te in eine m solchen Syste m gemäß den FCC -Richtlinien Abschnitt 15 bzw .
Sicherheitshinweise MVME2500 Installation and Use (6806800L01H) 139 Besc hädigung von Sch altkreisen Elektro statische Entl adung und unsachgemäße r Ein - und Au sbau des Produktes kann Schaltkre ise beschädigen ode r ihre Lebensd auer verkürze n.
MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 140 Kabel und S teck er Besc hädigung des Produkte s Bei de n RJ -45-Steck ern, die sich an de m Produkt befinde n, hande lt es sich e nt weder um T wisted-Pair -Etherne t (TPE) oder um E1/T1/J1-S tecke r .
Sicherheitshinweise MVME2500 Installation and Use (6806800L01H) 141 Datenver lus t W enn die Ba tterie we nig oder unzure iche nd mit Spannung ve r sorgt wir d, wird der RT C initialisie r t. T ausche n Sie die Batterie aus, be vor sie ben Jahre ta tsächliche r Nutzung ve rgangen sind.
MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 142.
MVME2500 Installation and Use (6806800L01H) 143 A abbreviations 13 accessories 30 B block diagram 61 board accessories 23 board configuration 29 C chipset 61 conventions 15 D disposal 26 disposal of p.
Index MVME2500 Installation and Use (6806800L01H) 144.
.
HOW TO R EACH LITERATURE AND T ECHNICAL SUPPORT: For lite rature, training, and tec hni cal as sistance and suppor t programs, visit www .emersonnetworkpower .c om/embeddedc omputing Emerson, Busine ss-Critical Continuity , Emerson Network Powe r and the Emerson Network Powe r logo are trademarks and se r vice mark s of Eme r son Electric Co.
Ein wichtiger Punkt beim Kauf des Geräts Emerson MVME2500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Emerson MVME2500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Emerson MVME2500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Emerson MVME2500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Emerson MVME2500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Emerson MVME2500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Emerson MVME2500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Emerson MVME2500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Emerson MVME2500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.