Benutzeranleitung / Produktwartung ControlWave GFC des Produzenten Emerson
Zur Seite of 23
www.EmersonProcess.com/Bristol Product Information Package PIP-Control Wave LS July, 2006 C ontrol Wave Loo p Power Su pp l y Control Wave LOOP POWER SUPPLY PRODUCT INSTALLATION GUIDE For the followin.
IMPORTANT! READ INSTRUCTIONS BEFORE STARTING! Be sure that these instructions are carefully read and understood before any operation is attempted. Improper use of this device in some applications may result in damage or injury. The user is urged to keep this book filed in a convenient location for future reference.
WARRANTY A. Bristol warrants that goods described he rein and manufactured by Bristol are free from defects in material and workmanship for one year from the date of shipment unless otherwise agreed to by Bristol in writing.
How to return material for Repair or Exchange Before a product can be returned to Bristol for repair, upgrade, exchange, or to verify proper operation, form (GBU 13.01) must be completed in order to obtain a RA (Return Authorization) number and thus ensure an optima l lead time.
Bristol Inc. Repair Authorization Form (off-line completion) (Providing this information will permit Bristol Inc. to effectiv ely and efficiently process you r return. Completion is required to receive optimal lead time. Lack of info rmation may result in increased lead tim es.
Bristol Training GET THE MOST FROM YOUR BRISTOL BABCOCK INSTRUMENT OR SYSTEM • Avoid Delays and problems in getting your system on-line • Minimize installation, start-up and maintenance costs. • Make the most effective use of our hardware and software.
A Few Words About Bristol Inc. For over 100 years, Bristol ® has been providing innovative solutions for the measurement and control industry. Our product lines rang e from simple analog chart recorders, to sophisticated digital remote pr ocess controllers and flow computers, all the way to turnkey SCADA systems.
For technical questions regarding ACCOL products, OpenBSI Utilities , UOI and all other software except for Control Wave and OpenEnterprise products, call (860) 945-2286. For technical questions about Network 3000 hardware, call (860) 945-2502. You can e-mail the Application Support Group at: bsupport@bristolbabcock.
PIP-ControlWaveLS 1 Table Of Contents PIP-ControlWaveLS Control Wave Loop Supply Part Numbers 400095-01-7, 721708-01-3 & 721708-02-1 TABLE OF CONTENTS Section Title Page # Section 1 – LOOP SUPPLY INTRODUCTION 1.1 GENERAL DE SCRIPTI ON ..........
PIP-ControlWaveLS Page - 1 Section 1 LOOP SUPPLY INTRODUCTION 1.1 GENERAL DESCRIPTION Bristol’s Control Wave Loop Power Supply (herein referred to as the “ Loop Supply ” ), provides regulated an.
Page - 2 PIP-ControlWaveLS Figure 1 - Control Wave Loop Supply Board Views & Component Identification Diagram Table 1 - Input/Pass-through Power Connectors – TB1 & TB3 TB1 Pin # TB3 Pin # Si.
PIP-ControlWaveLS Page - 3 8-Pin Connector (TB2) accommodate s distribution of the regulated +24V loop supplies. Table 2 - Regulated 24V Supply Distribution Connector TB2 TB2 Pin # Signal Name Description 1, 3, 5, 7 +24V Regulated +24Vdc 2, 4, 6, 8 24V Return Reg.
Page - 4 PIP-ControlWaveLS Section 2 LOOP SUPPLY INSTALLATION 2.1 LOOP SUPPLY MOUNTING Encapsulated Loop Supply Assemblies are prov ided with the printed circuit board (PCB) secured to a Power Supply Back Plate Bracket and protected by a Power Supply Board Cover.
PIP-ControlWaveLS Page - 5 Figure 3 - Encapsulated ControlWave Loop Supply Mounting Diagram.
Page - 6 PIP-ControlWaveLS 2.2 LOOP SUPPLY WIRING Loop Supply’s utilize Terminal Blocks that ar e equipped with compression-type terminals which accommodate a #16 AWG size wire. A conne ction is made by inserting the wire’s bared end (1/4” Max.) into the clamp beneath the screw and then tightening the screw.
PIP-ControlWaveLS Page - 7 Figure 4 - ControlWave MICRO & EFM Loop Supply to I/O Module Wiring.
Page - 8 PIP-ControlWaveLS Figure 5 - Control Wave Express, ExpressPAC and GFC Loop Supply to Process I/O Board Wiring Diagrams Control Wave EFM – System Controller Module - Connector TB1 TB1-1 = +V.
PIP-ControlWaveLS Page - 9 Control Wave ExpressPAC – CPU/System Controller Board - Connector TB1 TB1-3 = POWER IN+ (from loop Supply Connector TB3-3) TB1-4 = GND (from loop Supply Connector TB3-2) C.
Page - 10 PIP-ControlWaveLS Section 3 SPECIFICATIONS 3.1 OPERATING SPECIFICATIONS Function: Provides four isolated 24Vdc power output terminal pairs to power an RTU , a Transmitter and/or a number of non-isolated I/O (associated with a particular Control Wave RTU.
PIP-ControlWaveLS Page - 11 Vibration: 1g for 10-500 Hz on any axis per SAMA PMC-31-1 without damage or impairment. .5g for 150-2000Hz RFI Susceptibility: 10V/meter – 80MHz to 1000MHz 3.3 CONNECTORS 3.3.1 Terminal Block TB1 3-Pin Terminal Block TB1 accommodates input power from the bulk DC source.
Page - 12 PIP-ControlWaveLS Figure 6 - Loop Supply Dimensions Drawing.
Product Information Package PIP-Control Wave LS July, 2006 ControlWave Loop Power Supply The information in this document is subjec t to change without notice. Every effort has been made to supply complete and accurate information. However, Bristol, Inc.
Return to the T able of Content s Return to the List of Manuals.
Ein wichtiger Punkt beim Kauf des Geräts Emerson ControlWave GFC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Emerson ControlWave GFC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Emerson ControlWave GFC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Emerson ControlWave GFC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Emerson ControlWave GFC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Emerson ControlWave GFC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Emerson ControlWave GFC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Emerson ControlWave GFC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Emerson ControlWave GFC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
