Benutzeranleitung / Produktwartung 260203 des Produzenten Aleratec
Zur Seite of 82
® USER GUIDE Aleratec 1:15 Blu-ray/DVD/CD T ower Publisher SLS ™ Part No. 260203.
www .aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice.
www .aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy . If it is not installed in accordance with the manufacturer ’ s instructions, it may cause interference with radio or television reception.
www .aleratec.com Safety Regulations W ARNING T o prevent re or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet.
www .aleratec.com T able of Contents Introduction ................................................................................................... 1 Product Features ..................................................................................
www .aleratec.com ®.
www .aleratec.com 1 Introduction Thank you for purchasing the 1:15 Blu-ray/DVD/CD T ower Publisher SLS. Please read this User Guide thoroughly before using this product.
www .aleratec.com 2 Introduction Key Items – 1:15 Blu-ray/DVD/CD T ower Publisher SLS *No te: Th ere i s curr ently no Li ghtSc ribe B lu-ra y medi a ava ilable .
www .aleratec.com 3 Introduction 1:15 Blu-ray/DVD/CD T ower Publisher SLS: LCD Front Panel (V iew may vary from picture) 1. Display shows all functions and messages 2. ESC button is used to cancel a selected function 3. ENT button is used to execute a selected function 4.
www .aleratec.com 4 Introduction 1:15 Blu-ray/DVD/CD T ower Publisher SLS: Removable Hard Disk Drive Y our T ower Publisher SLS is equipped with a removable hard disk drive (HDD) for storing images of frequently copied discs.
www .aleratec.com 5 Precautions Before you start: Before you start using your 1:15 Blu-ray/DVD/CD T ower Publisher SLS, please read the following to ensure proper operation. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty .
www .aleratec.com 6 Precautions Before you start - continued External Connection W arning: In order to operate the duplicator solely as a standalone unit (no connection to the computer), you have to make sure all of the USB connection(s) are off. If by any chance, the USB connection(s) are on, please refer to “Setup Guide: Setup USB 2.
www .aleratec.com 7 Overview Unpacking the Unit Y our system was shipped in one box and contains the 1:15 Blu-ray/DVD/CD T ower Publisher SLS and cables. Carefully open the box and remove the top protective foam padding. Remove the following: • 1:15 Blu-ray/DVD/CD T ower Publisher SLS • 2 Power Cords • 1 USB 2.
www .aleratec.com 8 Overview LightScribe Software Installation Minimum System Requirements: PC running W indows 2000, XP , V ista or 7 1. Install the Aleratec File System Manager . First write down the key code labeled “Product Key” on the front of the disc and then put the disc into your PC.
www .aleratec.com 9 Overview c. Click Install to complete the installation. 3. Connect the 1:15 to your PC with the USB cable. 4. Make sure the 1:15 is in USB mode. Press the “USB” fastkey on the control panel on the front of the 1:15. If the screensaver is on you may have to press the button twice.
www .aleratec.com 10 Overview 6. After the 1:15 T ower Publisher SLS has rebooted, go to “My Computer” in W indows and look to see if the HDD is there. It will be labeled as “Duplicator”. 7. If you open the drive location you will see three or four folders.
www .aleratec.com 1 1 Overview Using the LightScribe Labeling Software The following procedure demonstrates using the LightScribe T emplate Labeler to generate the label les (.lsi) used by the Stand-Alone T ower Publisher SLS. 1. Launch the LightScribe T emplate Labeler .
www .aleratec.com 12 Overview 3. Insert T ext and/or Pictures into the template. Depending on the template chosen, you may have options to modify text box(es) or picture(s). ▪ T o insert pictures, click on the dedicated area to select the picture you’d like to use.
www .aleratec.com 13 Overview Using the LightScribe Labeling Software - continued A menu will appear prompting you to save your le. Navigate to the “label” folder located on the “Duplicator” drive. Y ou may copy multiple les into this folder .
www .aleratec.com 14 Overview 6. Press the “USB” button on the duplicator and set the USB mode to “Off”. Reboot the duplicator by turning it off and then on again. After the device has completed the start up process, press the “Print” fast key (also menu option 2) on the main menu of the duplicator and push the ENT key .
www .aleratec.com 15 Overview Other Label Printing Related Options There are other label printing related operations available as described below: Menu 3: Copy+Print This function allows you to perform the disc duplication then the disc labeling operation as part of one process.
www .aleratec.com 16 Overview Control Functions For detailed descriptions of each control function and feature see the Menu Overview section beginning on page 59 of this User Guide. Control Functions 1. Copy 2. Print 3. Copy + Print 4. T est 5. Compare 6.
www .aleratec.com 17 Stand-Alone T ower Publisher SLS: T utorials Making Disc-to-Disc Copies This process copies a Master Disc to several blank discs simultaneously . Due to the nature of simultaneous disc duplication, a good quality Master Disc and lower recording speeds maybe necessary to ensure high success and quality duplications rates.
www .aleratec.com 18 Stand-Alone T ower Publisher SLS: T utorials 4. Start the Copy Process. a. Insert your Master Disc and blank discs into their corresponding tray(s) and press the ENT button.
www .aleratec.com 19 Stand-Alone T ower Publisher SLS: T utorials Making Disc-to-Disc Copies - continued Example: T o enter a value of 21 copies, do the following Make sure the cursor is located at the rst position: i. Press DOWN button consecutively until “0” is displayed.
www .aleratec.com 20 Stand-Alone T ower Publisher SLS: T utorials Note: If either one of the PREVIOUS 2 screens are displayed for more than 2 minutes, please check your Master Disc or blank discs for quality . d. Allow 5-10 seconds for the duplicator to detect both your Master Disc and blank discs.
www .aleratec.com 21 Stand-Alone T ower Publisher SLS: T utorials Making Disc-to-Disc Copies - continued e. 2 or 3 seconds after copying begins the following “Copy Progress” screen will appear: Note: It is normal to see the progress indicator stay at 0-10% and at 100% for approximately 30 seconds during CD duplication.
www .aleratec.com 22 Stand-Alone T ower Publisher SLS: T utorials T o continue making additional copies, remove the successfully completed copies from the ejected trays and replace with blank discs. T o terminate your project and return to the main menu, press ESC .
www .aleratec.com 23 Stand-Alone T ower Publisher SLS: T utorials Load Source Files onto the Hard Drive - continued Y ou can create a new partition by either loading it directly from a Master Disc or by copying it directly onto the Hard Drive through the tower publisher ’ s USB connection.
www .aleratec.com 24 Stand-Alone T ower Publisher SLS: T utorials Load Master Disc onto the Hard Drive The following steps will show you how to load your Master Disc into the installed Hard Drive as a partition and copy the stored partition onto blank discs.
www .aleratec.com 25 Stand-Alone T ower Publisher SLS: T utorials Load Master Disc onto the Hard Drive - continued b. Press ENT to enter “Hard Drive Setup” menu and you will see the following display: c. Load your Master Disc on to the Hard Drive.
www .aleratec.com 26 Stand-Alone T ower Publisher SLS: T utorials e. Y ou now have the choice to load your Master Disc into a new (empty) partition or overwrite one of the existing partitions (if any .
www .aleratec.com 27 Stand-Alone T ower Publisher SLS: T utorials Load Master Disc onto the Hard Drive - continued h. Press ENT button to conrm. Once your Master Disc has been recognized. The loading progress indicator will be displayed and you will see the following: i.
www .aleratec.com 28 Stand-Alone T ower Publisher SLS: T utorials Rename Existing Hard Drive Partition Name When you load your Master Disc to a hard drive partition, you are asked to give it a name. Y ou can rename it at anytime afterwards (including the Reserved Partition).
www .aleratec.com 29 Stand-Alone T ower Publisher SLS: T utorials Rename Existing Hard Drive Partition Name - continued 7. Rename the partition you’ve just selected. T o enter a partition name, use the UP or DOWN button to select the character and use ESC or ENT button to move the cursor position.
www .aleratec.com 30 Stand-Alone T ower Publisher SLS: T utorials Delete Existing Hard Drive Partition Permanently If for some reason you need to delete your existing hard drive partition permanently , do the following: 1. Use the UP or DOWN arrow button to navigate to the following screen.
www .aleratec.com 31 Stand-Alone T ower Publisher SLS: T utorials Delete Existing Hard Drive Partition Permanently - continued 7. Y ou will be directed back to the “Hard Drive Setup” menu.
www .aleratec.com 32 Stand-Alone T ower Publisher SLS: T utorials How to Make Copies from the Hard Drive 1. Load a master disc to the HDD if it is not already loaded and make sure Source is set to the Hard Drive. 2. Go back to “COPY” Menu. a. Use UP or DOWN arrow button to navigate to the following screen.
www .aleratec.com 33 Stand-Alone T ower Publisher SLS: T utorials Y ou can select “No Counter” if you prefer to copy continuously with no interruption. (It will still count the number of copies, but it will not notify you when to stop.) T o select the “No Counter”, simply press ENT button when you see the screen above.
www .aleratec.com 34 Stand-Alone T ower Publisher SLS: T utorials How to Make Copies from the Hard Drive - continued vii. Press DOWN button consecutively until “1” is displayed. viii. Now , we have “0021” displayed and then, press ENT once and the cursor is now moved to OK .
www .aleratec.com 35 Stand-Alone T ower Publisher SLS: T utorials Note: If the number of blank discs you inserted doesn’t match the number of discs detected on the screen, please give 10-15 seconds for the duplicator to recognize all of your blank discs.
www .aleratec.com 36 Stand-Alone T ower Publisher SLS: T utorials How to Make Copies from the Hard Drive - continued Next, rell more blank media to continue making more copies, or you can press ESC to terminate your project and go back to the main menu.
www .aleratec.com 37 Stand-Alone T ower Publisher SLS: T utorials Select Burn Speed This process will allow you to adjust the duplication speed subject to your various needs. By default, the duplication speed will be set to the optimal speed. However , under some circumstances, you might want to lower the duplication speed.
www .aleratec.com 38 Stand-Alone T ower Publisher SLS: T utorials Select Burn Speed - continued 3. Select duplication speed type. There are different types of recording speeds: ▪ HDD/BD to BD: Copying to Blu-ray Media from Pre-loaded BD Partition or Original BD Media.
www .aleratec.com 39 Stand-Alone T ower Publisher SLS: T utorials Select the Source drive When making a copy , you will need to specify where the master is. Is it in the Source drive? Or is it an Image inside the Hard Drive? This tutorial will show you how to change the Master Reading Source to satisfy your needs.
www .aleratec.com 40 Stand-Alone T ower Publisher SLS: T utorials Select the Source drive - continued b. Enter “Source Selection” menu. Press ENT to enter into “Source Selection” menu. Y ou will see the following display: Make sure it is located at “Drive 1 Port 0.
www .aleratec.com 41 Stand-Alone T ower Publisher SLS: T utorials Change the SETUP Settings Most of the internal settings and information are stored inside the “Setup” menu. T o explore and modify these settings is simple. In the following example you will be modifying the “Auto Start” setting.
www .aleratec.com 42 Stand-Alone T ower Publisher SLS: T utorials Audio CD Editing This procedure will guide you in using the “Mix Audio T racks” feature. This process allows you to combine audio tracks from various CDs into a single customized audio CD.
www .aleratec.com 43 Stand-Alone T ower Publisher SLS: T utorials 4. Once you made your selection, you will see the following display: OR When you see the above display , insert an audio CD that contains your music track(s) in the Master Reading T ray and a blank CD-R media into one of W riter T rays.
www .aleratec.com 44 Stand-Alone T ower Publisher SLS: T utorials Audio CD Editing - continued 6. Press ENT button to submit your selection. Y ou will see the following display: W arning: If the capac.
www .aleratec.com 45 Stand-Alone T ower Publisher SLS: T utorials 8. Press ENT button to continue. Y our old Master Disc will be ejected and you can insert another audio CD into the Reading T ray .
www .aleratec.com 46 Stand-Alone T ower Publisher SLS: T utorials Audio CD Editing - continued Example of Mixing Audio T racks to the Hard Drive In this example we will be creating a new Audio CD from 2 different discs: ▪ CD1: song 2, and song 4 ▪ CD2: song 3, song 4 and song 5 1.
www .aleratec.com 47 Stand-Alone T ower Publisher SLS: T utorials 8. Use the UP or DOWN arrow button until you see following display: 9. Press ENT to submit your selection. Y ou will see the following display: 10. Once the loading process is complete, you will see the following display: 1 1.
www .aleratec.com 48 Stand-Alone T ower Publisher SLS: T utorials Audio CD Editing - continued 14. Use the UP or DOWN arrow button until you see “T rack 4” on the 2nd line of the display . Press ENT to conrm. A “*” symbol will appear on the left of “T rack 4”.
www .aleratec.com 49 Stand-Alone T ower Publisher SLS: T utorials 20. Press the ENT button again to conrm. Y ou will see the following display: 21. When the process is complete, your mixed copy will be ejected. Y ou will see the following display: Y ou will then be directed back to the main menu: Processing to Disc.
www .aleratec.com 50 Stand-Alone T ower Publisher SLS: T utorials Introduction to Manage Accounts The “Manage Accounts” feature allows the administrator to: • Create user accounts and passwords to prevent unauthorized use of the duplicator . • V iew existing user account lists.
www .aleratec.com 51 Stand-Alone T ower Publisher SLS: T utorials Manage Accounts: Overview T o access the “Manage Accounts” feature, perform the following steps: 1. T urn on the duplicator . After the bootup is complete, you will see the following display: 2.
www .aleratec.com 52 Stand-Alone T ower Publisher SLS: T utorials Manage Accounts Feature Overview - continued View User This menu allows you to view current existing user accounts. 1. Press the ENT button to enter into this menu. Press the ESC button to go back to the main menu or cancel the current selection.
www .aleratec.com 53 Stand-Alone T ower Publisher SLS: T utorials Note: User “Admin” is the administrative account, you can NOT change the user name for this account, but you will be able to change the password for this account. Note: User name consists of maximum 8 alphanumeric letters or numbers.
www .aleratec.com 54 Stand-Alone T ower Publisher SLS: T utorials Introduction to Duplication Mode This feature reduces the “Duplication from Hard Drive” process to a single step. There are three features under “Duplication mode”: 1. On the Fly 2.
www .aleratec.com 55 Stand-Alone T ower Publisher SLS: T utorials Disadvantage: ▪ The loading time may have an impact on overall duplication time for small duplication jobs. ▪ The Master Disc will be loaded to the reserve partition in the Hard Drive temporarily until a new master is loaded and overrides the previous image.
www .aleratec.com 56 Stand-Alone T ower Publisher SLS: T utorials Introduction to Duplication Mode - continued 5. Press the ENT button once. Y ou will see the following display: 6. Press the UP or DOWN button consecutively to select your desired mode.
www .aleratec.com 57 Stand-Alone T ower Publisher SLS: T utorials Using AUTOCOPY The “Autocopy” function allows you to copy from Disc to Disc automatically without pressing any keys. It is the simplest way to make BD/CD/DVD copies. The following tutorial will show you how to use this feature.
www .aleratec.com 58 Stand-Alone T ower Publisher SLS: T utorials Using AUTOCOPY - continued Note: It is normal to see the progress indicator stay at 0-10% and at 100% for approximately 30 seconds during CD duplication. Additionally it is normal to see the progress indicator stay at 0-10% and at 100% for up to 1 minute during DVD duplication.
www .aleratec.com 59 Menu Overview Menu Overview 1. Copy This menu will guide you to make BD/DVD/CD copies. Before you enter this menu to copy , please make sure you have selected the correct Source drive. 2. Print This menu will guide you to burn LightScribe labels.
www .aleratec.com 60 Menu Overview 6. T est+Copy This menu will guide you to perform a simulation of the copying process. If everything passes the simulation, the copying process will be performed. If there’ s an error encountered during the simulation, an error message will be displayed and the copying process will not be initiated.
www .aleratec.com 61 Menu Overview 13. Mix AudioT racks This menu will guide you through the “Mix Audio T racks” feature. This feature helps you combine audio tracks from various CDs into a single customize audio CD. 14. Setup 14.1 Language This setting allows you to choose which language you prefer to navigate this duplicator .
www .aleratec.com 62 Menu Overview 14. Setup - continued 14.4 CD W riting Mode This setting allows you to select which mode you can duplicate a CD with. There are two dif ferent modes, “Disc at Once” and “Track at Once”. Unless you understand completely what they mean, we strongly suggest you to set it as “Disc at Once”.
www .aleratec.com 63 Menu Overview 14.1 1 DVD+R High Compatibility Mode This feature allows you to enable/disable the DVD+R High Compatibility Mode feature by turning this feature ON or OFF . The purpose of this feature is to increase the compatibility of DVD+R media with a broader range of DVD V ideo players.
www .aleratec.com 64 Menu Overview 15. Utilities - continued 15.2 Prescan This feature allows you to scan and detect any bad sectors existing in the Master Disc. It is recommended that you perform a Prescan before starting the duplication task for all Master Discs.
www .aleratec.com 65 Menu Overview 16. Manage Accounts This feature allows the administrator the ability to: ▪ Create user accounts and passwords to prevent unauthorized use of this duplicator . ▪ V iew existing user account lists ▪ Edit existing user account information, including name and password.
www .aleratec.com 66 T roubleshooting 1. NodisplayonLCDortheunitdoesnotoperatewhenthepower ison. ▪ Check the power cable connection and the power outlet. ▪ Make sure the power voltage matches the voltage of your power outlet.
www .aleratec.com 67 T roubleshooting 7. Cannotboot-uporfailstoupgradermwar e. ▪ Contact our T ech Support. 8. CanIloaddatadirectlyfr ommycomputertomyduplicator’sHardDrive? ▪ No, your duplicator’ s Hard Drive has a unique le system that computers will not recognize.
www .aleratec.com 68 T roubleshooting Error Codes T ypically the system will show an error message and error code if a problem occurs. Please reference the below diagram for a description of the error codes and the recommend solution: Error Code Error Message Recommendation 200 Master Disc Empty Blank Disc is in the Source T ray .
www .aleratec.com 69 T roubleshooting Error Code Error Message Recommendation 213 DVD-RAM is not supported! The system does NOT support DVD-RAM format. 230 Not enough HDD space There is not enough hard drive space to create a new partition. Please delete some existing nonimportant partition to free up more spaces.
www .aleratec.com 70 Recommended Media Certied LightScribe media is required for burning direct-to disc LightScribe labels. For best results, Aleratec Duplicator Grade LightScribe media is recommended. CD-R LightScribe V1.2 Duplicator Grade Media 100 Pack™ Part No.
www .aleratec.com 71 T echnical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec T echnical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you.
www .aleratec.com 72 Service and Support Aleratec, Inc., Limited Warranty This Limited W arranty covers defects encountered in the course of normal use of this product and does not apply to damage from improper use, abuse, accidents, unauthorized service, or inadequate packaging when shipping the product to Aleratec, Inc.
www .aleratec.com 73 Service and Support Please Note: This W arranty is valid only within the United States and Puerto Rico, and applies only to products that are new and unopened on the date of purchase.
www .aleratec.com 74 Service and Support T o Obtain W arranty Service: Y ou must ship your subsystem to the authorized dealer where your subsystem was purchased within the one year warranty period and no later than thirty days after discovery of claimed defect, whichever occurs rst.
www .aleratec.com 75 T echnical Support F AX Back Form Aleratec, Inc. T echnical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.
Document Number: 260203_UG_ENG_Rev . A Copyright © 2011 Specifications subject to change without notice. Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.
Ein wichtiger Punkt beim Kauf des Geräts Aleratec 260203 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aleratec 260203 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aleratec 260203 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aleratec 260203 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aleratec 260203 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aleratec 260203 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aleratec 260203 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aleratec 260203. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aleratec 260203 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
