Benutzeranleitung / Produktwartung G41T-M6 des Produzenten Elitegroup
Zur Seite of 70
Preface Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author .
ii Preface Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • T.
iii T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface i Chapter 1 1 1 1 1 1 Introducing the Motherboard 1 Introduction................................................................................
iv PCI/PnP Setup...................................................................36 PC Health Status................................................................36 Fr equency/V oltage Control................................................41 Load Default Settings.
1 Introducing the Motherboard Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the G41T -M6 motherboard. This motherboard is a high performance, enhanced function motherboard .
2 Introducing the Motherboard Feature The motherboard uses an LGA775 type of Intel ® Core TM 2 Quad/Core TM 2 Duo/ Pentium ® Dual-Core/Celeron ® 400 series processors that carries the following fea.
3 Introducing the Motherboard Onboard LAN (optional) • PCI Express base 1.1 compliant • Integrated PHY for 10/100/1000 Mbps • IEEE 802.3x compliant flow control support • IEEE 802.
4 Introducing the Motherboard 1.Some hardware specifications and software items are subject to change without prior notice. 2.Due to chipset limitation, we recommend that motherboard be oper- ated in the ambiance between 0 and 50 °C . The firmware can also be used to set parameters for different processor clock speeds.
5 Introducing the Motherboard Motherboard Components T able of Motherboard Components This concludes Chapter 1. The next chapter explains how to install the motherboard. LABE L COMPONENTS LGA775 socket for Intel ® Core TM 2 Q u ad/C ore TM 2 Duo/ Penti um ® Dual -Core/Ce l er on ® 400 series processors 2.
6 Introducing the Motherboard Memo.
7 Installing the Motherboard Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a ground.
8 Installing the Motherboard Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.
9 Installing the Motherboard Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings 1. T o avoid the system instability after clearing CMOS, we recommend users to enter the main BIOS setting page to “Load Default Settings” and then “Save and Exit Setup”.
10 Installing the Motherboard Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sur e that you DO NOT scratch the motherboard or any of the surface- mount resistors with the clip of the cooling fan.
11 Installing the Motherboard A. Read and follow the instructions shown on the sticker on the CPU cap. B. Unload the cap · Use thumb & forefinger to hold the lifting tab of the cap. · Lift the cap up and remove the cap completely from the socket.
12 Installing the Motherboard Installing Memory Modules This motherboard accommodates two memory modules. It can support two 240-pin DDR3 1066. The total memory capacity is 8 GB. Y ou must install at least one module in any of the two slots. The total memory capacity is up to 8 GB.
13 Installing the Motherboard T able A: DDR3 (memory module) QVL (Qualified V endor List) Typ e S ize Ve ndor Mo dule N am e 512 M B E LP I D A P C 3- 8500U - 7- 00- A P A - data M 3OS S3H 3I 3120B 5Z.
14 Installing the Motherboard Typ e S iz e Ve ndor Mod ule N am e A D 31333002GO U ( A D 6 3I 1B16) M 3OAD 6H 3J4130F 1C 5E elix ir M 2F2G 64C B8H A 4N - C G 0903.
15 Installing the Motherboard Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities.
16 Installing the Motherboard Follow these instructions to install an add-on card: 1 Remove a blanking plate from the system case corresponding to the slot you are going to use. 2 Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot.
17 Installing the Motherboard Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: SA T A1~4: Serial A T A connectors These connectors are used to support the new Serial A T A devices for the highest data transfer rates (3.
18 Installing the Motherboard F_USB1~2: Front Panel USB headers The motherboard has four USB ports installed on the rear edge I/O port array . Additionally , some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.
19 Installing the Motherboard Installing a Hard Disk Drive/CD-ROM/SA T A Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD- ROM drive.
20 Installing the Motherboard Refer to the illustration below for proper installation: This motherboard does not support the “Hot-Plug” function. 1 Attach either cable end to the connector on the motherboard. 2 Attach the other cable end to the SA T A hard drive.
21 Installing the Motherboard Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. DVI Port (optional) Use the DVI port to connect the monitor .
22 Installing the Motherboard Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 Connect the CPU cooling fan cable to CPU_F AN . 2 Connect the standard power supply connector to A TX_POWER .
23 Installing the Motherboard Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V . CPU_F AN: CPU Cooling F AN Power Connector 1 GND System Ground 3 Sense Sensor 4 PWM PWM Pi n Signal Name Function 2 +12V Power +12V A TX_POWER: A TX 24-pin Power Connector Pin Signal Name Pin Signal Name 1 +3.
24 Installing the Motherboard Power/Sleep/Message waiting LED Connecting pins 2 and 4 to a single or dual-color, front panel mounted LED provides power on/off, sleep, and message waiting indication. Front Panel Header The front panel header (F_P ANEL) provides a standard set of switch and LED headers commonly found on A TX or micro-A TX cases.
25 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc. ” BIOS with support for Windows Plug and Play . The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS.
26 Using BIOS Press the delete key to access the BIOS Setup Utility . CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. v02.
27 Using BIOS Using BIOS When you start the Setup Utility , the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options.
28 Using BIOS For the purpose of better product maintenance, the manufacture reserves the right to change the BIOS items presented in this manual. The BIOS setup screens shown in this chapter are for reference only and may differ from the actual BIOS.
29 Using BIOS Primary IDE Master/Slave; SA T A1~4 CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Primary IDE Master Help Item Select the type of device connected to the system. Y our computer has one IDE channel and each channel can be installed with one or two devices (Master and Slave).
30 Using BIOS Advanced Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer .
31 Using BIOS 1st/2nd/3rd Boot Device ( Hard Disk Drive/CD/DVD/Removable Dev .) Use this item to determine the device order the computer used to look for an operating system to load at start-up time. The devices showed here will be different depending on the exact devices installed on your motherboard.
32 Using BIOS Advanced Chipset Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer . Configure DRAM Timing by SPD (Enabled) When this item is set to enable, the DDR timing is configured using SPD.
33 Using BIOS Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
34 Using BIOS Press <Esc> to return to the main menu setting page. Power Management Setup This page sets up some parameters for system power management operation. Select the ACPI state used for System Suspend. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
35 Using BIOS Press <Esc> to return to the main menu setting page. Resume By USB (S3) (Disabled) This item allows you to enable/disable the USB device wakeup function from S3/S4 mode. Resume By PS2 KB (S3) (Disabled) This item enables or disables you to allow keyboard activity to awaken the system from power saving mode.
36 Using BIOS Init Display First (PCI) Use this item to select which graphics controller to use as the primary boot devices. PCI/PnP Setup This page sets up some parameters for devices installed on the PCI bus and those utilizing the system plug and play capability .
37 Using BIOS Smart Fan Function (Press Enter) Scroll to this item and press <Enter> to view the following screen: SMART Fan Function (Enabled) This item allows you to enable/disable the control of the CPU fan speed by changing the fan voltage.
38 Using BIOS CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item F10: Save ESC: Exit +/-/: V alue Enter : Select F9: Load Default Settings F1:General Help : Move Press <Esc> to return to the Smart Fan Function page.
39 Using BIOS CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item F10: Save ESC: Exit +/-/: V alue Enter : Select F9: Load Default Settings F1:General Help : Move Press <Esc> to return to the Smart Fan Function page.
40 Using BIOS Press <Esc> to return to the PC Health Status page. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Disabled Enabled Options SM.
41 Using BIOS Frequency/V oltage Control This page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have in- stalled in your system. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
42 Using BIOS Supervisor Password (Not Installed) This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. Press <Esc> to return to the main menu setting page.
43 Using BIOS Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility . When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main menu.
44 Using BIOS Updating the BIOS Y ou can download and install updated BIOS for this motherboard from the manufacturer’s W eb site. New BIOS provides support for new peripherals, improve- ments in performance, or fixes for known bugs. Install new BIOS as follows: This concludes Chapter 3.
45 Using the Motherboard Software Chapter 4 Using the Motherboard Software Auto-installing under Windows Vista/7 The support software DVD-ROM/CD-ROM disc loads automatically under Windows V ista/7. When you insert the DVD-ROM/CD-ROM disc in the DVD-ROM/CD-ROM drive, the autorun feature will automatically bring up the install screen.
46 Using the Motherboard Software Setup T ab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that al- lows you to open Windows Explorer and show the contents of the support disk.
47 Using the Motherboard Software 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recom- mended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5.
48 Using the Motherboard Software Manual Installation Insert the disk in the DVD-ROM/CD-ROM drive and locate the P A TH.DOC file in the root directory .
Setting Up eJIFFY 49 Introduction eJIFFY is a fast boot program under Linux. Instead of waiting Windows O.S to start execution, eJIFFY is ready to provide users the instant enjoyment on web browsing, photo review and online chat just within several seconds after boot up.
Setting Up eJIFFY 50 Installation and BIOS Setup DVD Activation Finish the DVD utility setup, and then set the BIOS to complete eJIFFY activation. 1. Insert ECS software utility DVD and enter below “Utilities” screen. Click eJIFFY feature item to install.
Setting Up eJIFFY 51 3. Press <DEL> or click the BIOS Setup button on the post screen to enter the BIOS setup page after boot up. 4. And then enter the Advanced Setup page to enable the item ECS eJIFFY Func- tion . Press F10 to save the configuration and exit.
Setting Up eJIFFY 52 Y ou need to finish the CD installation first before setting the BIOS. 2. Enter My Computer to find the eJIFFY setup program. 3. Click the setup button to run the eJIFFY software installation program, restart your computer after you finish.
Setting Up eJIFFY 53 4. Press <DEL> or click the BIOS Setup button on the post screen to enter the BIOS setup page after boot up. 5. And then enter the Advanced Setup page to enable the item ECS eJIFFY Func- tion . Press F10 to save the configuration and exit.
Setting Up eJIFFY 54 Entering eJIFFY The post screen appears within several seconds after boot up and it has three buttons on it, Operating system, eJIFFY and BIOS Setup. If you click eJIFFY , the following screen will appear . And If you make no choice it will enter the normal OS automatically after ten seconds.
Setting Up eJIFFY 55 Feature Icons The following illustration shows the main feature icons that eJIFFY provides on the menu. ePix: Photo viewing. eW eb: Fir efo x for web br owsing/webmail and watching flash video . Shows eP al on-line connection status.
Setting Up eJIFFY 56 Usage F AQ Q1: How to download files to hard disk through eW eb? Click on the file link directly . Then select “Save File” in the pop-up window . 3. eW eb supports to open video/audio files online in Flash player format. Due to firefox limitation, the browser does not support files in Real player or Media player formats.
Setting Up eJIFFY 57 Q2: How to switch to different languages settings? Step1. Step2..
Setting Up eJIFFY 58 2. Then the “Save Image” window appears. Y ou may rename the image file in the “Name” column and save the file in a folder as the following picture shows. 1. Select the image you want to save and press the right key of your mouse to show the menu, then click the option “ Save Image As” from the menu.
Setting Up eJIFFY 59 Enter the ePix window , then click the icon “Folder” located in the upper left-hand corner, then follow the path for the files you have saved to view the image files. Q1: How to find image files saved in hard disk through ePix? ePix: Photo viewing.
Setting Up eJIFFY 60 Q2: How to use the fit function under slide show? 1. Click “Edit” and select “Preferences” option from the menu. 2. Click “V iewer” and choose “Keep previous zoom” in “After loading an image”. Close the window and you can use the fit function under slide show now .
Setting Up eJIFFY 61 “Unmount” is to safely remove the storage devices. T o unplug the external storage devices such as USB drives, users need to clik the “Unmount” prompt as the following picture shows, then the icon will change to , you can remove the device now .
Setting Up eJIFFY 62 Memo.
63 Trouble Shooting Chapter 6 Trouble Shooting Start up problems during assembly After assembling the PC for the first time you may experience some start up problems. Before calling for technical support or returning for warranty , this chapter may help to address some of the common questions using some basic troubleshooting tips.
64 Trouble Shooting c) The PC suddenly shuts down while booting up. 1. The CPU may experience overheating so it will shutdown to protect itself. Ensure the CPU fan is working properly . 2. From the BIOS setting, try to disable the Smartfan function to let the fan run at default speed.
u B r e w o P d e s s e r p s i n o i a f C P t u b . t r a t s o t s l s e Y y l p p u S r e w o P f i k c e h C t i n U ( U S P ) n i k r o w s i g o N o N d n u o s p e e B y n A ？ o N k c e h c .
66 Trouble Shooting Memo.
Ein wichtiger Punkt beim Kauf des Geräts Elitegroup G41T-M6 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Elitegroup G41T-M6 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Elitegroup G41T-M6 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Elitegroup G41T-M6 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Elitegroup G41T-M6 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Elitegroup G41T-M6 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Elitegroup G41T-M6 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Elitegroup G41T-M6. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Elitegroup G41T-M6 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
