Benutzeranleitung / Produktwartung U 86050-4 I des Produzenten Electrolux
Zur Seite of 32
ARCTIS U 86050-4 I Fr eezer Oper ating Instructions PERFEKT IN FORM UND FUNKTION.
2 Dear customer , Before placing your new r efriger ator/freezer into oper ation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e r eference.
Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dis pos al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Appliance P ackaging Information .
Important Safety Instructions These warnings ar e pr ovided in the interest s of your s afety . Ensur e you fully understand them befor e in stalling or us ing the appliance. Y our s afety is of par amount importance. If you ar e unsur e about the meaning of these warnings contact the Cu stomer Car e Department for assi stance.
Important Safety Instructions • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted.
6 • This product should be serviced by an authorised engineer and only genuine spare parts should be used. • Under no circumstances should you attempt to r epair the appliance yourself. Repair s carried out by inexperienced per sons may cause injury or serious malfunctioning.
7 Remove tr ansport packaging The appliance and the interior fittings are pr otected for tr ansport. ☞ 1. Pull off the adhesive tape on the left and right side of the door . 2. Remove all adhesive tape and packing pieces from the interior of the appliance.
Grid pr eparation The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es. Warning! When changing the side at which the door opens, r emove plug from the mains. Left door opening: ☞ 1.
6 8 7 2 Installation Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es.
Installation 10 Installation kit ☞ Building the appliance in under a worktop The dimensions of the recessed installation area must corr espond with those indicated in the figure. ☞ 600 550 min. 600 1 1xA 12 1xB 2xC 2 2 1 1 2 2. To fit these br ackets r emove the two screws at the top left and right hand front corner s of the cabinet.
Installation 11 4. Push the appliance into place. The plug socket nec- essary for connection of the appliance to the elec- tricity supply should be positioned, so that the plug is not placed in the recess. To adjust the height pr o- ceed as follows: 5.
Installation 12 4 11 5 ° 9. To mount the furnitur e door proceed as shown in the fig- ures: 6 a b 10 1 2 3 4 C 8. Push the appliance into place and r etain the cab- inet with screws thr ough the securing brackets into the worktop or adjacent woodwork as necessary .
Installation 13 7 8 ab clic clic c C C.
Installation 14 Upper part of kitchen furniture panel Lower part of kitchen furniture panel 9/a 275 275 max 100 11 = = 10 9 b a = = 1 2 10 1 2 3 45 °.
Installation 15 10. Refit the covering strip. 13 A 12.
Installation 16 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=1 00 mm, the plinth may be fitted without adjustments.
Installation 17 The mains cable may only be changed by a qualified electrician or competent person. If your appliance needs r epairing, please contact your local AEG Service Force Centr e. Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person.
18 Description of the appliance View of the appliance ➁ ➂ ➃ 1 Freezer calendar 2 Control panel 3 Drawer (only for stor age) 4 Drawer (for storing fr ozen food and fr eezing fresh pr oduce) 5 Temper atur e display 6 Magnet holder for door alarm Prior to Initial Start–Up ☞ 1.
19 Oper ating and indicator panel Important! Only use the appliance when built-in! 1 Thermostat control knob 2 ON/OFF switch 3 Pilot light (green) 4 Warning light (r ed) 5 Fast freeze light (yellow) 6 Fast freeze button and used to switch off the warning tone The appliance can be switched ON or OFF by pressing the ON/OFF switch (2) .
Operating and indicator panel 20 – the minimum storage temper atur e is no longer being maintained (fault); – excessive amounts of fresh food ar e placed inside; or – if the appliance door is open for too long. ☞ 1. Turn the thermostat contr ol knob to the desir ed setting with the aid of a coin.
21 Starting up and temper atur e r egulation ☞ 1. Turn the thermostat contr ol knob (1) in the dir ection of “1” . The green light (3) and the r ed light (4) come on, the audible warning sounds (if fitted), and the refriger ation motor starts up.
22 Switching off the appliance To switch off the appliance, turn the thermostat contr ol knob to posi- tion "0". If the appliance is not going to be u sed for an extended period: ☞ 1. Remove all deep-frozen packages as well as ice-tr ays. 2.
Freezing and storing fr ozen food 23 explode! Never store lemonade, juices, beer , wine, sparkling wine etc. in the freezer . ☞ 1. Press the fast fr eeze button for the fr eezing of fresh food.
24 Stor age Goods Symbols/Fr eezing Calendar • The symbols on the dr awer s show different types of fr ozen goods. • The number s indicate stor age times in months for the appropriate types of frozen goods.
25 Warning! • Do not use electrical heating appliances or any other mechanical or artificial devices to speed up the defrosting pr ocess. • Do not use defrosting spr ays, they can be hazardous to your health and/or contain substances that damage plastics.
26 Magnetic door seal After opening and closing the door of your freezer you will not be able to open the door again immediately . This is because a vacuum will have developed inside, keeping the door closed until the pressur es inside and outside the door have equalised.
27 Ener gy Saving Tips • Do not install the appliance near boilers, r adiators or other sour ces of heat. High ambient temperatur es cause longer , more fr equent operation of the compr essor . • Ensure sufficient air cir culation and exhaust at the appliance base and at the back wall of the appliance.
What to do if ... 28 The freezer temper ature is not sufficient, red light illuminates, temperatur e alarm signal sounds. Temper ature is not properly adjusted. A large quantity of warm food placed in the appli- ance within the last 24 hours. Please look in the “Initial Start Up” section.
What to do if ... 29 Symptoms P ossible Cause Remedy The compressor starts after a period of time. This is normal, no error has occurred. The compressor does not start immediately after changing the temperatur e setting.
30 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a r elatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or fr eezer can cause the refriger ant to boil and vaporise.
.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2004 2222 740-27 -00- 0304 Subject to change without notice.
Ein wichtiger Punkt beim Kauf des Geräts Electrolux U 86050-4 I (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Electrolux U 86050-4 I noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Electrolux U 86050-4 I - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Electrolux U 86050-4 I reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Electrolux U 86050-4 I erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Electrolux U 86050-4 I besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Electrolux U 86050-4 I verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Electrolux U 86050-4 I. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Electrolux U 86050-4 I gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
