Benutzeranleitung / Produktwartung 350I des Produzenten Alcatel Carrier Internetworking Solutions
Zur Seite of 138
3EC 16982 AGAA T CZZA Ed. 01 SPEED T OUCH 350i CLI R eference Guide ADSL Modem for ISDN.
3EC 16982 AGAA T CZZA Ed. 01 2 / 138 Status Released Change Note BD F aa 39813 Short Title CD-RG AST350 CLI All rights reserved. P assing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
Contents 3EC 16982 AGAA T CZZA Ed. 01 3 / 138 Contents Preface 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Bridge Commands 21 . . . . . . . . . . . . . . . . .
Contents 3EC 16982 AGAA T CZZA Ed. 01 4 / 138.
Preface 5 / 138 3EC 16982 AGAA T CZZA Ed. 01 P reface W elcome to the Alcatel SpeedT ouch 350i Command Line Interface Reference Guide ! This Reference Guide aims to give the fastidious user a concise, practical and easy to use document for configuring the SpeedT ouch 350i via its character based Command Line Interface.
Preface 6 / 138 3EC 16982 AGAA T CZZA Ed. 01 T rademarks The following trademarks are used in this document: Speed T ouch is a trademark of the Alcatel Company Netscape and Netscap.
7 / 138 3EC 16982 AGAA T CZZA Ed. 01 Alcatel SpeedT ouch 350i CLI Navigation.
8 / 138 3EC 16982 AGAA T CZZA Ed. 01.
9 / 138 3EC 16982 AGAA T CZZA Ed. 01 Accessing the Command Line Interface Endusers can access the Command Line Interface via a T elnet session. However , this requires that T CP/IP connectivity exists between the host from which the T elnet session is opened and the SpeedT ouch 350i .
10 / 138 3EC 16982 A GAA TCZZA Ed. 01 Navigation and Manipulation Manipulation commands are commands that manipulate operations on the command line, for example changing the command group, go to the beginning of the command line, go to the end of the command line, etc.
11 / 138 3EC 16982 AGAA T CZZA Ed. 01 The Help Command Execute help from top level to list all available command groups for the SpeedT ouch 350i . EXAMPLE ( SpeedT ouch Pr o ): =>help Follo.
12 / 138 3EC 16982 A GAA TCZZA Ed. 01 Entering help followed by a specific command, e.g. help phonebook add (starting from top level) or help add (e.g.
13 / 138 3EC 16982 AGAA T CZZA Ed. 01 Y ou can break off a command by pressing Ctrl+G" . This can be useful in a situation where a user is prompted to enter a value which it does not know and wants to abort the command. Instead of being prompted over and over again for the same value, this allows to break of the command.
14 / 138 3EC 16982 A GAA TCZZA Ed. 01 Command Line Interface T op Level Structure The following command groups are available: bridge config dhcp dns ip phonebook pptp s.
15 / 138 3EC 16982 AGAA T CZZA Ed. 01 Command Line Interface Commands All CLI commands are commands that operate on, or configure, the SpeedT ouch 350i . Y ou can execute these commands from top level, preceded by the name of the command group from which the command should be executed (e.
16 / 138 3EC 16982 A GAA TCZZA Ed. 01 Direct FTP Access The SpeedT ouch 350i File System The SpeedT ouch 350i permanent storage, further referred to as 'file system ', exists of nonvolatile memory responsible for storing, retrieving and maintaining the SpeedT ouch 350i software image(s) and configuration files.
17 / 138 3EC 16982 AGAA T CZZA Ed. 01 SpeedT ouch 350i File System Access Rights F ollowing access rights apply on the file system: 'root ' Directory Listing of 'root' dire.
18 / 138 3EC 16982 A GAA TCZZA Ed. 01.
19 / 138 3EC 16982 AGAA T CZZA Ed. 01 Alcatel SpeedT ouch 350i CLI Command Description.
20 / 138 3EC 16982 A GAA TCZZA Ed. 01.
1 Bridge Commands 21 / 138 3EC 16982 AGAA T CZZA Ed. 01 1 Bridge Commands bridge (to access the Bridge level) bridge config bridge flush bridge load bridge macadd bridge macdelete bridge maclist bridg.
1 Bridge Commands 22 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge config Show/set bridge aging policy . SYNT AX: bridge config [age = <number {10 100000}>] [age] A number between 10 and 100000 (seconds). Represents the lifetime of a dynamically learned MAC address.
1 Bridge Commands 23 / 138 3EC 16982 AGAA T CZZA Ed. 01 bridge flush Flush complete bridging configuration. The flush command does not impact previously saved configurations.
1 Bridge Commands 24 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge load Load saved (or default) bridge configuration. SYNT AX: bridge load [{saved|defaults}] bridge load Load saved bridge configuration. bridge load saved Load saved bridge configuration. bridge load defaults Load default bridge configuration.
1 Bridge Commands 25 / 138 3EC 16982 AGAA T CZZA Ed. 01 bridge macadd Add a static MAC address to the filtering database. Allows to manually add static addresses, which should normally be dynamically discovered by the bridge itself .
1 Bridge Commands 26 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge macdelete Remove a MAC address from the filtering database. SYNT AX: bridge macdelete hwaddr = <hardwareaddress> hwaddr The MA C address of the entry to delete.
1 Bridge Commands 27 / 138 3EC 16982 AGAA T CZZA Ed. 01 bridge maclist Show current MAC address filtering database. SYNT AX: bridge maclist EXAMPLE: =>bridge maclist 00:90:d0:01:02:03 –– static, OBC ff:ff:ff:ff:ff:ff –– static, OBC 01:80:c2:00:00:00 –– static, OBC 01:80:c2:00:00:01 –– static, OBC .
1 Bridge Commands 28 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge portadd Create a bridge interface. SYNT AX: bridge portadd dest = <vp*vc|name> [proto = {vcmux|llc}] [vc_mux_fcs = {off|on}] dest The destination address for the new interface. T ypically a phonebook entry .
1 Bridge Commands 29 / 138 3EC 16982 AGAA T CZZA Ed. 01 bridge portconfig Configure a bridge interface. SYNT AX: bridge portconfig port = <name> [state = <{disabled|learning|forwarding}>] port The name of the bridge interface to configure.
1 Bridge Commands 30 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge portdelete Delete a bridge interface. bridge portdelete port = <name> port The name of the interface name to delete.
1 Bridge Commands 31 / 138 3EC 16982 AGAA T CZZA Ed. 01 bridge portlist Show all current bridge interfaces. SYNT AX: bridge portlist EXAMPLE: =>bridge portlist 0 OBC state: forwarding RX bytes: 757.
1 Bridge Commands 32 / 138 3EC 16982 A GAA TCZZA Ed. 01 bridge save Save current bridge configuration. SYNT AX: bridge save RELA TED COMMANDS : bridge flush Flush complete bridge configuration.
2 Config Commands 33 / 138 3EC 16982 AGAA T CZZA Ed. 01 2 Config Commands config (to access the Config level) config erase config flush config load config reset config save.
2 Config Commands 34 / 138 3EC 16982 A GAA TCZZA Ed. 01 config erase Physically remove all saved configurations. SYNT AX: config erase RELA TED COMMANDS : config flush Flush complete runtime configuration. config load Load complete saved or default configuration.
2 Config Commands 35 / 138 3EC 16982 AGAA T CZZA Ed. 01 config flush Flush complete current configuration without affecting saved configurations. This combines all flush commands: bridge flush, dhcp flush, dns flush, phonebook flush, pptp flush, system flush and optionally ip flush .
2 Config Commands 36 / 138 3EC 16982 A GAA TCZZA Ed. 01 config load Load complete saved or default configuration. Execute config flush prior to config load . In case the saved configuration is loaded (defaults=no) this combines all load commands: bridge load, dhcp load, dns load, phonebook load, pptp load, system load and optionally ip load .
2 Config Commands 37 / 138 3EC 16982 AGAA T CZZA Ed. 01 config reset Flush current runtime configuration and restore factory default configuration. Optionally the runtime, saved IP configuration can be preserved. SYNT AX: config reset [keep_ip = <{no|yes}>] [keep_ip] Keep IP settings (yes) or not (no).
2 Config Commands 38 / 138 3EC 16982 A GAA TCZZA Ed. 01 config save Save all existing configurations and modifications entered by the user . This combines all save commands: bridge save, config save, dhcp save, dns save, ip save, phonebook save, pptp save, and system save .
3 DHCP Commands 39 / 138 3EC 16982 AGAA T CZZA Ed. 01 3 DHCP Commands dhcp add dhcp client dhcp clrstats dhcp config dhcp delete dhcp flush dhcp list dhcp load dhcp policy dhcp save dhcp start dhcp st.
3 DHCP Commands 40 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp add Assign a static IP address to a host in the local network. This address is allocated on a permanent basis, and is excluded from the pool of addresses used by the SpeedT ouch 350i DHCP server .
3 DHCP Commands 41 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp client Set the AutoDHCP client time out in startup phase. Only applicable in AutoDHCP mode (See dhcp policy command). SYNT AX: dhcp client timeout = <number> timeout A number between 0 and 1814400 (seconds).
3 DHCP Commands 42 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp clrstats Clear SpeedT ouch 350i DHCP server statistics. SYNT AX: dhcp clrstats EXAMPLE: =>dhcp stats DHCP server statistics: Corrupted.
3 DHCP Commands 43 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp config Set SpeedT ouch 350i DHCP server configuration. Execute dhcp status to see the actual status and configuration.
3 DHCP Commands 44 / 138 3EC 16982 A GAA TCZZA Ed. 01 EXAMPLE: =>dhcp status DHCP Server Status: Running Current configuration: Address Range: 10.0.0.1 ... 10.255.255.254 Netmask: 255.0.0.0 Lease time: 10800 seconds Gateway (default router): 10.0.0.
3 DHCP Commands 45 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp delete Delete a DHCP lease. SYNT AX: dhcp delete index = <number> index The index number of the entry to be deleted. Execute dhcp list to see a list of the index numbers of all current DHCP leases.
3 DHCP Commands 46 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp flush Flush complete DHCP server configuration and dynamic leases. The flush command does not impact previously saved configurations. SYNT AX: dhcp flush EXAMPLE: =>dhcp list Leases: Lease 2: 01:52:41:53:20:A0:1B:A7:EB:AD:3C:C0:01:01:00:00:00 ip address: 10.
3 DHCP Commands 47 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp list List current DHCP leases, indicated by their index number . SYNT AX: dhcp list EXAMPLE OUTPUT : =>dhcp list Leases: Lease 2: 01:52:41:53:20:50:6D:C0:40:02:32:C0:01:01:00:00:00 ip address: 10.
3 DHCP Commands 48 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp load Load saved (or default) DHCP server configuration and permanent leases. SYNT AX: dhcp load [{saved|defaults}] dhcp load Load saved DHCP server configuration and permanent leases. dhcp load saved Load saved DHCP server configuration and permanent leases.
3 DHCP Commands 49 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp policy Set SpeedT ouch 350i DHCP server policy . SYNT AX: dhcp policy [verifyfirst = <yes|no>] [trustclient = <yes|no>] [spoo.
3 DHCP Commands 50 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp save Save complete SpeedT ouch 350i DHCP server configuration and permanent DHCP leases. SYNT AX: dhcp save RELA TED COMMANDS : dhcp flush Flush complete DHCP server configuration and dynamic leases dhcp load Load saved or default DHCP server configuration and permanent leases.
3 DHCP Commands 51 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp spoof Do not use this command..
3 DHCP Commands 52 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp start Start SpeedT ouch 350i DHCP server . SYNT AX: dhcp start EXAMPLE: =>dhcp status DHCP Server Status: Stopped Current configuration: ..... =>dhcp start =>dhcp status DHCP Server Status: Searching for server.
3 DHCP Commands 53 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp stats Show SpeedT ouch 350i DHCP server statistics. SYNT AX: dhcp stats EXAMPLE OUTPUT : =>dhcp stats DHCP server statistics: Corrupte.
3 DHCP Commands 54 / 138 3EC 16982 A GAA TCZZA Ed. 01 ACKs sent Indicates the number of ACKnowledgement replies were sent to successfully configured DHCP clients. NAKs sent Indicates the number of NotAcKnowledgement replies were sent to wrongly configured DHCP clients.
3 DHCP Commands 55 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp status Show current DHCP server configuration. SYNT AX: dhcp status EXAMPLE: =>dhcp status DHCP Server Status: Client Current configuration: Address Range: 10.0.0.1 ... 10.255.255.254 Netmask: 255.
3 DHCP Commands 56 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp stop Stop SpeedT ouch 350i DHCP server . SYNT AX: dhcp stop EXAMPLE: =>dhcp status DHCP Server Status: Running Current configuration: ..... =>dhcp stop =>dhcp status DHCP Server Status: Stopped Current configuration: .
3 DHCP Commands 57 / 138 3EC 16982 AGAA T CZZA Ed. 01 dhcp troff Disable verbose console logging. No debug traces are generated anymore. SYNT AX: dhcp troff EXAMPLE: =>dhcp status DHCP Server Status: Running Current configuration: ..... Tracing: on .
3 DHCP Commands 58 / 138 3EC 16982 A GAA TCZZA Ed. 01 dhcp tron Enable verbose console logging. Debug traces are generated. SYNT AX: dhcp tron EXAMPLE: =>dhcp status DHCP Server Status: Running Current configuration: ..... Tracing: off ..... =>dhcp tron =>dhcp status DHCP Server Status: Running Current configuration: .
4 DNS Commands 59 / 138 3EC 16982 AGAA T CZZA Ed. 01 4 DNS Commands dns (to access the DNS level) dns add dns clear dns clrstats dns delete dns domain dns flush dns fwdadd dns fwddelete dns fwdlist dn.
4 DNS Commands 60 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns add Add a static DNS entry for IP hosts who do not reveal their hostname in the DHCP request, or even worse, not support DHCP . SYNT AX: dns add hostname = <string> [addr = <ipaddress>] hostname The name of the IP host (without the (sub)domain name).
4 DNS Commands 61 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns clear Delete current DNS entries. SYNT AX: dns clear EXAMPLE: =>dns list Domain: business.lan Nr. Hostname IP Address 0 SpeedTouch *.*.*.* 1 TestHost 10.0.0.140 2 HTTP_Server 10.0.0.8 3 FTP_Server 10.
4 DNS Commands 62 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns clrstats Clear DNS statistics. SYNT AX: dns clrstats EXAMPLE: =>dns stats DNS Statistics: Corrupted packets recv : 0 Local questions resolve.
4 DNS Commands 63 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns delete Delete a DNS entry . SYNT AX: dns delete index = <number> index The index number of the entry to be deleted. Execute dns list to see a list of the index numbers of all current DNS entries.
4 DNS Commands 64 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns domain Set local DNS (sub)domain name. SYNT AX: dns domain domain = <string> domain The local DNS (sub)domain name. REQUIRED EXAMPLE: =>dns list Domain: business.lan Nr. Hostname IP Address 0 SpeedTouch *.
4 DNS Commands 65 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns flush Flush complete SpeedT ouch 350i DNS server configuration and static entries. The flush command does not impact previously saved configurations. SYNT AX: dns flush EXAMPLE: =>dns list Domain: office.
4 DNS Commands 66 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns fwdadd Add a DNS forwarding entry . Normally this command should not be used. SYNT AX: dns fwdadd dns = <ipaddress> src = <ipaddress> mask = <ipmask (dotted or cidr)> [direct = <number>] dns The IP address of the (remote) DNS server .
4 DNS Commands 67 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns fwddelete Delete a DNS forwarding entry . Normally this command should not be used. SYNT AX: dns fwddelete src = <ipaddress> mask = <ipmask (dotted or cidr)> [dns = <ipaddress>] src The source IP address (pool) of the hosts to remove the entry for .
4 DNS Commands 68 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns fwdlist Show current DNS forwarding entries. Normally this command should not be used. SYNT AX: dns fwdlist RELA TED COMMANDS : dns fwdadd Add a DNS forwarding entry . dns fwddelete Delete a DNS forwarding entry .
4 DNS Commands 69 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns fwdtable Show DNS forwarding table. Normally this command should not be used. SYNT AX: dns fwdtable RELA TED COMMANDS : dns fwdlist Show current DNS forwarding entries.
4 DNS Commands 70 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns list Show current DNS entries. SYNT AX: dns list EXAMPLE OUTPUT : =>dns list Domain: office.home.lan Nr. Hostname IP Address 4* Z7V1D8 10.0.0.29 0 SpeedTouch *.*.*.* 1 TestHost 10.0.0.140 2 Default 10.
4 DNS Commands 71 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns load Load saved or default SpeedT ouch 350i DNS server configuration and static DNS entries. Execute dns flush prior to dns load . SYNT AX: dns load [{saved|defaults}] dns load Load saved bridge configuration.
4 DNS Commands 72 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns nslookup Search the hostname (via a known IP address) or the IP address (via a known hostname) of a DNS host. SYNT AX: dns nslookup lookup = <string> lookup The DNS hostname or IP address to query .
4 DNS Commands 73 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns save Save current SpeedT ouch 350i DNS server configuration and static entries. SYNT AX: dns save RELA TED COMMANDS : dns flush Flush complete DNS server configuration and dynamic entries. dns load Load saved or default DNS server configuration and static entries.
4 DNS Commands 74 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns start Start SpeedT ouch 350i DNS server . SYNT AX: dns start EXAMPLE: =>dns status DNS server status: Stopped DNS table size : 73, in use: 4, free: 94 % DNS forwarding table size : 10, in use: 0, free:100 % DNS forwarding dns servers table size : 25, in use: 4, free:84 % No dns cache.
4 DNS Commands 75 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns stats Show SpeedT ouch 350i DNS server statistics. SYNT AX: dns stats EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT : The SpeedT ouch 350i is configured as DNS server . =>dns list Domain: SpeedLAN.
4 DNS Commands 76 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns status Show SpeedT ouch 350i DNS server configuration. SYNT AX: dns status EXAMPLE OUTPUT : =>dns status DNS server status: Stopped DNS .
4 DNS Commands 77 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns stop Stop SpeedT ouch 350i DNS server . SYNT AX: dns stop EXAMPLE: =>dns status DNS server status: Started DNS table size : 73, in use: 4, free: 94 % DNS forwarding table size : 10, in use: 0, free:100 % DNS forwarding dns servers table size : 25, in use: 0, free:100 % No dns cache.
4 DNS Commands 78 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns toutfwd Set DNS forwarding timeout. SYNT AX: dns toutfwd timeout = <number> timeout A number (seconds).
4 DNS Commands 79 / 138 3EC 16982 AGAA T CZZA Ed. 01 dns troff Disable verbose console messaging. No debug traces are generated. SYNT AX: dns troff EXAMPLE: =>dns status DNS server status: Started .
4 DNS Commands 80 / 138 3EC 16982 A GAA TCZZA Ed. 01 dns tron Enable verbose console messaging. Debug traces are generated. SYNT AX: dns tron EXAMPLE: =>dns status DNS server status: Started DNS ta.
5 IP Commands 81 / 138 3EC 16982 AGAA T CZZA Ed. 01 5 IP Commands ip (to access the IP level) ip apadd ip apdelete ip aplist ip arpadd ip arpdelete ip arplist ip config ip flush ip ifconfig ip iflist .
5 IP Commands 82 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip apadd Assign an IP address to an interface. SYNT AX: ip apadd addr = <ipaddress> [netmask = <ipmask (dotted or cidr)>] intf = &.
5 IP Commands 83 / 138 3EC 16982 AGAA T CZZA Ed. 01 EXAMPLE: =>ip aplist 1 eth0 Type:Ethernet HWaddr 00:80:9f:24:ab:cf BRHWaddr ff:ff:ff:ff:ff:ff inet addr: 10.
5 IP Commands 84 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip apdelete Remove an IP address from an interface. SYNT AX: ip apdelete addr = <ipaddress> addr The IP address to delete. REQUIRED EXAMPLE: =>ip aplist 2 eth0 Type:Ethernet HWaddr 00:80:9f:24:ab:cf BRHWaddr ff:ff:ff:ff:ff:ff inet addr: 10.
5 IP Commands 85 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip aplist Show a list of all configured IP addresses. SYNT AX: ip aplist EXAMPLE: =>ip aplist 2 eth0 Type:Ethernet HWaddr 00:80:9f:24:ab:cf BRHWaddr ff:ff:ff:ff:ff:ff inet addr: 10.0.0.2 Bcast: 10.
5 IP Commands 86 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip arpadd Add a static entry to the SpeedT ouch 350i ARP cache. SYNT AX: ip arpadd intf = <interface name> ip = <ipaddress> [hwaddr = <hardwareaddress>] intf Always specify eth0 .
5 IP Commands 87 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip arpdelete Remove an entry from the SpeedT ouch 350i ARP cache. SYNT AX: ip arpdelete intf = <interface name> ip = <ipaddress> [hwaddr = <hardwareaddress>] intf Always specify eth0 .
5 IP Commands 88 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip arplist Show the SpeedT ouch 350i ARP cache. SYNT AX: ip arplist EXAMPLE OUTPUT : =>ip arplist Intf IP–address HW–address Type eth0 10.0.0.1 00:01:42:5f:7d:81 DYNAMIC eth0 10.0.0.8 00:a0:24:ae:66:e1 DYNAMIC eth0 10.
5 IP Commands 89 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip config Show/set global IP stack configuration options. Normally the IP stack configuration should not be altered.
5 IP Commands 90 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip flush Flush complete IP configuration. Dynamic configurations (e.g. from PPP or CIP links) remain.
5 IP Commands 91 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip ifconfig Configure interface parameters. SYNT AX: ip ifconfig intf = <interface name> [mtu = <number{293-20000}>] [status = <{down|up}>] [hwaddr = <hwaddress>] [group = <number>] intf Always specify eth0 .
5 IP Commands 92 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip iflist Show all current interfaces. SYNT AX: ip iflist EXAMPLE OUTPUT : =>ip iflist Interface GRP MTU RX TX TX–DROP STATUS HWADDR 0 loop 1 1500 116 0 0 UP 1 eth0 2 3000 21045795 1019664 0 UP 00:80:9f:24:ab:c f => RELA TED COMMANDS : ip ifconfig Configure interface parameters.
5 IP Commands 93 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip load Load saved (or default) IP configuration. Execute ip flush prior to ip load . SYNT AX: ip load [{saved|defaults}] ip load Load saved IP configuration. ip load saved Load saved IP configuration.
5 IP Commands 94 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip ping Send ICMP ECHO_REQUEST packets. SYNT AX: ip ping addr = <ip-address> [count = <number{1-1000000}>] [size = <number{1-20000}>] [interval = <number{100-1000000}>] [listen = <{off|on}>] addr The destination IP address.
5 IP Commands 95 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip rtadd Add a route to the SpeedT ouch 350i routing table. SYNT AX: ip rtadd dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)>.
5 IP Commands 96 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip rtdelete Delete a route from the SpeedT ouch 350i routing table. SYNT AX: ip rtdelete dst = <ip-address> [dstmsk = <ip-mask(dotted o.
5 IP Commands 97 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip rtlis t Show current SpeedT ouch 350i routing table. SYNT AX: ip rtlist EXAMPLE OUTPUT : =>ip rtlist Destination Source Gateway Intf Mtrc 10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0 0.0.0.140/32 0.
5 IP Commands 98 / 138 3EC 16982 A GAA TCZZA Ed. 01 ip save Save current IP configuration. SYNT AX: ip save RELA TED COMMANDS : ip flush Flush complete IP configuration.
5 IP Commands 99 / 138 3EC 16982 AGAA T CZZA Ed. 01 ip sendto Send UDP packets. SYNT AX: ip sendto addr = <ip-address> [count = <number{1-1000000}>] [size = <number{1-20000}>] [inter.
5 IP Commands 100 / 138 3EC 16982 AGAA T CZZA Ed. 01.
6 Phonebook Commands 101 / 138 3EC 16982 AGAA T CZZA Ed. 01 6 Phonebook Commands phonebook (to access the Phonebook level) phonebook add phonebook autolist phonebook delete phonebook flush phonebook l.
6 Phonebook Commands 102 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook add Add a phonebook entry . The number of entries is limited to 64. The number of active connections is limited to 12, but more may be configured at the same time.
6 Phonebook Commands 103 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook autolist Show auto PVCs, if supported by the Central Office DSLAM. (Only applicable for Alcatel ASAM DSLAMs). SYNT AX: phonebook autolist EXAMPLE INPUT/OUTPUT : =>phonebook autolist 8.
6 Phonebook Commands 104 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook delete Remove an unused phonebook entry . SYNT AX: phonebook delete name = <string> name the name of the phonebook entry to delete. Only applicable for phonebook entries that are not used, i.
6 Phonebook Commands 105 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook flush Flush complete phonebook. The flush command does not impact previously saved configurations.
6 Phonebook Commands 106 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook list Show current phonebook. SYNT AX: phonebook list [opt = <{long}>] [opt] Do not use this parameter .
6 Phonebook Commands 107 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook load Load saved (or default) phonebook. Execute phonebook flush prior to phonebook load . SYNT AX: phonebook load [{saved|defaults}] phonebook load Load saved phonebook configuration.
6 Phonebook Commands 108 / 138 3EC 16982 AGAA T CZZA Ed. 01 phonebook save Save current phonebook. SYNT AX: phonebook save RELA TED COMMANDS : phonebook flush Flush complete phonebook.
7 PPTP Commands 109 / 138 3EC 16982 AGAA T CZZA Ed. 01 7 PPTP Commands pptp (to access the PPTP level) pptp flush pptp ifadd pptp ifconfig pptp ifdelete pptp iflist pptp load pptp save.
7 PPTP Commands 110 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp flush Flush complete PPTP configuration. The flush command does not impact previously saved configurations.
7 PPTP Commands 111 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp ifadd Add a PPTP interface. SYNT AX: pptp ifadd dest = <vp*vc|name> [rate = <number{10-10000}>] [encaps = <{vcmux|nlpid}>] [ac <{never|always|keep}>] dest The destination for the relayed PPTP tunnel.
7 PPTP Commands 112 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp ifconfig Configure an existing PPTP interface. SYNT AX: pptp ifconfig intf = <vp*vc|name> [rate = <number{10-10000}>] [encaps = <{vcmux|nlpid}>] [ac <{never|always|keep}>] intf The PPTP interface to configure T ypically a phonebook name.
7 PPTP Commands 113 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp ifdelete Delete a PPTP interface. SYNT AX: pptp ifdelete intf = <vp*vc|name> intf The name od the PPTP interface to delete.
7 PPTP Commands 114 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp iflist Show current PPTP configuration. SYNT AX: pptp list EXAMPLE INPUT/OUTPUT : =>pptp iflist C:# Name VP VC Rate Encap AC Usage [by] 0.
7 PPTP Commands 115 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp load Load saved (or default) PPTP configuration. Execute pptp flush prior to pptp load . SYNT AX: pptp load [{saved|defaults}] pptp load Load saved PPTP configuration. pptp load saved Load saved PPTP configuration.
7 PPTP Commands 116 / 138 3EC 16982 AGAA T CZZA Ed. 01 pptp save Save current PPTP configuration. SYNT AX: pptp save RELA TED COMMANDS : pptp flush Flush complete PPTP configuration.
8 Software Commands 117 / 138 3EC 16982 AGAA T CZZA Ed. 01 8 Software Commands software (to access the Software level) software cleanup software deletepassive software setpassive software switch softw.
8 Software Commands 118 / 138 3EC 16982 AGAA T CZZA Ed. 01 software cleanup Remove all unused files from the passive software subdirectory . This command frees the passive software subdirectory from corrupted software files and configuration files. Software marked as passive software is not deleted.
8 Software Commands 119 / 138 3EC 16982 AGAA T CZZA Ed. 01 software deletepassive Delete passive software. SYNT AX: software deletepassive EXAMPLE: =>Software version Active : Sascha3.254 Passive : Bene3.228 =>Software deletepassive =>Software version Active : Sascha3.
8 Software Commands 120 / 138 3EC 16982 AGAA T CZZA Ed. 01 software setpassive Mark a file as passive software version. Only correctly uploaded software, valid for the SpeedT ouch 350i can be marked as passive software. SYNT AX: software setpassive file = <string> file the filename (without directory path) of the software package.
8 Software Commands 121 / 138 3EC 16982 AGAA T CZZA Ed. 01 software switch Switch active and passive versions and reboot the SpeedT ouch 350i . Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save the current configuration if needed, e.
8 Software Commands 122 / 138 3EC 16982 AGAA T CZZA Ed. 01 software version Show active and passive software versions. SYNT AX: software version EXAMPLE: =>Software version Active : Sascha3.280 Passive : Sascha3.254 => RELA TED COMMANDS : software switch Switch active and passive software versions and reboot the SpeedT ouch 350i .
9 System Commands 123 / 138 3EC 16982 AGAA T CZZA Ed. 01 9 System Commands system (to access the System level) system clearpassword system flush system load system reboot system save system setpasswor.
9 System Commands 124 / 138 3EC 16982 AGAA T CZZA Ed. 01 system clearpassword Clear current SpeedT ouch 350i system password. T o avoid unrestricted and unauthorized access to the SpeedT ouch .
9 System Commands 125 / 138 3EC 16982 AGAA T CZZA Ed. 01 system flush Flush current SpeedT ouch 350i system configuration, i.e. the System password.
9 System Commands 126 / 138 3EC 16982 AGAA T CZZA Ed. 01 system load Load saved (or default) system configuration. Execute system flush prior to system load . In most cases loading the default system configuration causes the SpeedT ouch 350i system password to be CLEARED .
9 System Commands 127 / 138 3EC 16982 AGAA T CZZA Ed. 01 system reboot Reboot the SpeedT ouch 350i . Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save the current configuration by executing config save .
9 System Commands 128 / 138 3EC 16982 AGAA T CZZA Ed. 01 system save Save current system configuration, i.e. the System password. T o avoid unrestricted and unauthorized access to the SpeedT ouch .
9 System Commands 129 / 138 3EC 16982 AGAA T CZZA Ed. 01 system setpassword Set/change the current SpeedT ouch 350i system password. Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save the current configuration via the system save command.
9 System Commands 130 / 138 3EC 16982 AGAA T CZZA Ed. 01 EXAMPLE 1: =>system setpassword password=Sascha => EXAMPLE 2: =>system setpassword password=$_BOARD_SERIAL_NBR =>system save .
10 TD Commands 131 / 138 3EC 16982 AGAA T CZZA Ed. 01 10 TD Commands td (to access this level) td call td prompt.
10 TD Commands 132 / 138 3EC 16982 AGAA T CZZA Ed. 01 td call Call a `T race & Debug` command. F or qualified personnel only . SYNT AX: td call cmd = <string> cmd The quoted trace & debug command string.
10 TD Commands 133 / 138 3EC 16982 AGAA T CZZA Ed. 01 td prompt Switch to Alcatelowned ` T race & Debug` prompt (expert mode). F or qualified personnel only . SYNT AX: td prompt Before entering the expert mode a DISCLAIMER is shown stipulating that the `T race & Debug` prompt (expert mode) is intended for qualified personnel only .
10 TD Commands 134 / 138 3EC 16982 AGAA T CZZA Ed. 01.
135 / 138 3EC 16982 AGAA T CZZA Ed. 01 Alcatel SpeedT ouch 350i CLI Command Inde x.
136 / 138 3EC 16982 AGAA T CZZA Ed. 01.
Index 137 / 138 3EC 16982 AGAA T CZZA Ed. 01 Inde x A add dhcp add, 40 dns add, 60 phonebook add, 102 apadd, ip apadd, 82 apdelete, ip apdelete, 84 aplist, ip aplist, 85 arpadd, ip arpadd, 86 arpdelet.
Index 138 / 138 3EC 16982 AGAA T CZZA Ed. 01 load bridge load, 24 config load, 36 dhcp load, 48 dns load, 71 ip load, 93 phonebook load, 107 pptp load, 115 system load, 126 M macadd, bridge macadd, 25.
Ein wichtiger Punkt beim Kauf des Geräts Alcatel Carrier Internetworking Solutions 350I (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alcatel Carrier Internetworking Solutions 350I noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alcatel Carrier Internetworking Solutions 350I - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alcatel Carrier Internetworking Solutions 350I reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alcatel Carrier Internetworking Solutions 350I erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alcatel Carrier Internetworking Solutions 350I besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alcatel Carrier Internetworking Solutions 350I verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alcatel Carrier Internetworking Solutions 350I. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alcatel Carrier Internetworking Solutions 350I gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
