Benutzeranleitung / Produktwartung E Spot LED des Produzenten Elation Professional
Zur Seite of 52
R e v . 3 / 1 1 / 2 0 1 0 – v i s a g e V e r s i o n 1 . 0 ! E Spot Led ™ ! ! ! Elati on Prof essional 6122 S Eastern Ave Los Angeles, Ca 90040 www.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 2 www.Elati onLighti ng.com.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 3 www.Elati onLighti ng.com CONTENTS 1. Gene ral I nfo rmat io n……………………………………………………………………… 4 a. Int ro duct io n……………………………………………………………………….
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 4 www.Elati onLighti ng.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and relia.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 5 www.Elati onLighti ng.com rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 6 www.Elati onLighti ng.com 2. SAFETY INSTRUCTIONS The E Spot Led ™ is an extremely sophisticated piece of electronic equipment. To guarantee a trouble free operation, it is important to follow the guidelines in this manual.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 7 www.Elati onLighti ng.com 3. FEATURES • Pan 540° or 630˚ (User selectable) / Tilt 2 70 ° • 15 ˚ Beam Angle • Low Power Consumption .
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 8 www.Elati onLighti ng.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 9 www.Elati onLighti ng.com 5. FIXTURE OVERVIEW 1. LED Assembly 2. LCD Menu Display 3 . Mode/Esc Button 4 . Up Button 5 . Down Button 6 . Enter B utton 7 . Microphone 8 . Carrying Handle 9 . 3-Pin DMX Output 10 .
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 10 www.Elati onLighti ng.com 1. LED– Extremely high optical LED output , Over 2,200 lumens from a sin-gle chip (White) 2. LED Menu Display - 4-segment menu display. Used to display the DMX address as well as all other menu functions.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 11 www.Elati onLighti ng.com 13. Power Switch – Controls main power to the unit. 14. Fuse Holder Assembly – This assembly houses the 4amp GMA safety fuse. Always replace the fuse with an exact match unless otherwise spec ified by an authorized Elation Service Technician.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 12 www.Elati onLighti ng.com 6. MOUNTING AND INSTAL L ATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 13 www.Elati onLighti ng.com Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 14 www.Elati onLighti ng.com The E Spot Led ™ provides a unique mounting bracket assembly that integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one unit (see the illustration below).
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 15 www.Elati onLighti ng.com 7. UNDERSTANDING DMX DMX- 512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 16 www.Elati onLighti ng.com the Elation Opto Branch 4™ or DMX Branch/4™. Be sure to follow the above figure when making your own cables.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 17 www.Elati onLighti ng.com DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your D MX line.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 18 www.Elati onLighti ng.com out from the DMX controller. The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the base of the fixture.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 19 www.Elati onLighti ng.com 8 . FIXTURE M ENU On -Board System Menu: The E Spot Led ™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 20 www.Elati onLighti ng.com GOBO Reset only motors for gobo and rotation OTHR Reset other motor s LIFE 0000~9999 Displ ays the tot al fixt ure.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 21 www.Elati onLighti ng.com 1. Switch on the E S pot L ed ™ and wait for the fixture reset process to finished. 2. Press the Mode/Esc button to access the main menu. Toggle through the menu by pressing the Up and Down buttons until the display shows A001.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 22 www.Elati onLighti ng.com 4. Tap the UP or DOWN button to select either “Master” or “Alone” and press ENTER.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 23 www.Elati onLighti ng.com 4. RESE (RESET) MENU - ALL - Resets all the motors in the unit. SCAN - Resets the Pan and Tilt motors. COLR (Color) - Resets the color motors. GOBO - Resets the gobo motors.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 24 www.Elati onLighti ng.com wheel motor. 1. Access the main menu. 2. Tap the UP button until “RESE” is displayed, press ENTER. 3. Tap the UP button until “COLR” is displayed, then press ENTER to con fi rm.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 25 www.Elati onLighti ng.com CLMP - Clears the lamp running time. LIFE - With this function you can display the total running time of the fixture. 1. Access the main menu. 2. Tap the UP button until ”TIME” is displayed, press ENTER.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 26 www.Elati onLighti ng.com - This menu function will reverse the mirror TILT movements. 1. Access the main menu. 2. Tap the UP button until “RTLT” is displayed, press ENTER. 3. The display will show “ON/OFF”.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 27 www.Elati onLighti ng.com 6. Press MODE/ESC to return to the main menu. 10. MIC MENU - This function allows for electronic control of the internal microphone’s sound sensitivity. 1. Access the main menu.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 28 www.Elati onLighti ng.com two seconds without any menu activity. 5. Press ENTER to confirm. 6. Press MODE/ESC to return to the main menu. FLIP – This function will reverse the display readout buy 180˚.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 29 www.Elati onLighti ng.com 4. The display will show “ON/OFF.” 5. Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function. 6. Press ENTER to confirm.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 30 www.Elati onLighti ng.com DFSE - With this function you can restore the factory default settings of the fixture. All settings will be set back to the default values. Any edited scenes will be lost.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 31 www.Elati onLighti ng.com 3. Tap the UP or DOWN button until “FANS” is displayed, press ENTER. 4. The display will show “HIGH/AUTO”. 5. Press UP or DOWN button to select “ HIGH ” or “ AUTO”.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 32 www.Elati onLighti ng.com 9. Once you reach your desired calibration press ENTER to confirm and lock in your calibration. 14. EDIT MENU - T his menu item allows you to write a program into the fixture’s internal memory (EEPROM) via the control panel or via an external DMX controller.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 33 www.Elati onLighti ng.com SEPR - With this function you can Select program to be edit. 1. Access the main menu. 2. Tap the UP button until “EDIT” is displayed, press ENTER. 3. Tap the UP button until “SEPR” is displayed, press ENTER.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 34 www.Elati onLighti ng.com Editing procedure 1 : Using the control board only. 1. Access the main menu. 2. Tap the UP button until “EDIT” is displayed and press ENTER. 3. The display will show “SC-01”, this stands for the scene number.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 35 www.Elati onLighti ng.com memory. The number of steps can be defined under “EDIT” and the scenes can be called up under “Run.” To run the scenes see page 30. Editing procedure 2: Using an external controller.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 36 www.Elati onLighti ng.com 9 . DMX ADD RESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 37 www.Elati onLighti ng.com 13. Press ENTER to confirm. 14. Press MODE/ESC to return to the main menu. Controller Settings : 6. Set the DMX value of channel 1 to a value of 7. 7. Set the DMX value of channel 2 to a value of 7 or 8.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 38 www.Elati onLighti ng.com 10 . DMX CHA NNEL TRAITS : The chart below details the channel layout for 14 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting t he fixture into a 12-channel DMX fixture.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 39 www.Elati onLighti ng.com DMX channel function and values: DMX channel functions and their val ues (14 DMX channels): Mode/Ch annel Value Fu.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 40 www.Elati onLighti ng.com 160 - 175 Rotating gobo 6 shake 176 - 191 Rotating gobo 7 shake 192 - 255 Rotating gobo wheel cont.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 41 www.Elati onLighti ng.com 32 - 63 No function (shutter open) 64 - 95 Strobe effect slow to fast 96 - 127 No function (shutter open) 128 - 15.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 42 www.Elati onLighti ng.com 11. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 43 www.Elati onLighti ng.com Color - wheel error: The color wheel is not located in the default posit ion after start-up or after a reset command.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 44 www.Elati onLighti ng.com 12 . CLEANING AND MAI NTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 45 www.Elati onLighti ng.com 13 . Photometric Data:.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 46 www.Elati onLighti ng.com 17 . GOBOS:.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 47 www.Elati onLighti ng.com 15 . DIMENSIONAL D RAWI N GS:.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 48 www.Elati onLighti ng.com 16 . CIRCUIT SC HEMATICS.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 49 www.Elati onLighti ng.com 17 . TECHNICA L SPECIFICATION S Please Not e: Sp ec ific at ion s a nd imp ro ve me nts in t he de sig n o f th is u ni t an d t his ma nu al a re su bje ct t o c ha nge without any prior writ ten n otice.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 50 www.Elati onLighti ng.com.
E SPOT LED ™ ©Elation Professi onal, L os Angeles Ca. 51 www.Elati onLighti ng.com.
Rev. 27 / 10 /200 9 – v i s a g e V e r s i o n 1 . 0 Elation Professional ® 6122 S. Eastern Ave. Los Angeles, CA. 90040 323 - 582 - 3322 / 323 - 832 - 9142 fax www.
Ein wichtiger Punkt beim Kauf des Geräts Elation Professional E Spot LED (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Elation Professional E Spot LED noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Elation Professional E Spot LED - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Elation Professional E Spot LED reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Elation Professional E Spot LED erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Elation Professional E Spot LED besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Elation Professional E Spot LED verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Elation Professional E Spot LED. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Elation Professional E Spot LED gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
