Benutzeranleitung / Produktwartung LC-XC1 des Produzenten Eiki
Zur Seite of 46
MULTIMEDIA PRO JECTOR MODEL LC-XC1 OWNER’S MANUAL.
LC- XC 1 2 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient f eatures and functions. Operating the pro jector properly enables you to manage those fea tures and maintains it in better condition for a considerable time.
LC- XC 1 3 SAFETY INSTRUCTIONS All the saf ety and operating instructions should be read before the product is opera ted. Read all of the instruct ions given here and retain them fo r late r use. U npl ug this p rojecto r from AC power supply before cleaning .
LC- XC 1 4 COMPLIA NCES Federal Commu nicati on Co mmission Not ice This equipment has been t ested and found to co mply with the lim its for a Class A digit al device, purs uant to Part 15 of FCC Rules.
LC- XC 1 5 TABLE OF CONTENTS FEATURES A ND DES IGN 6 PREPARATI ON 7 NAME OF EACH PART OF THE PROJECTO R7 SETTING- UP THE PROJECTOR 8 CONNECTING THE AC POW ER CORD 8 POSITIONING THE PROJECTOR 9 ADJUSTA.
LC- XC 1 6 ♦ Co mpati bility This projector widel y accepts various video and computer input signals including; • Computers IBM-compatible and Macintosh computers up to 1280 x 102 4 reso lution. • 6 Color Systems NTSC, PAL , SECAM, NTSC 4.43, PA L-M or PAL- N color s ystem can be connect ed.
LC- XC 1 7.
LC- XC 1 8 This projector uses nominal input voltages of 100-120 V or 200-240 V AC. T he projector automatically selects the correct input voltag e. It is designed t o work with sing le- phase power systems hav ing a grounded neutr al conductor. To reduce the risk of electrical shock, do not plug into any other type of power sy stem.
LC- XC 1 9 POSITIONING THE PROJ ECTOR LENS SHIFT ADJUSTMENT The projecti on l ens can be moved up an d dow n wi th the mo tor-d rive n lens shift functio n. Th is fu nctio n makes it easy to provide the projected i mage where you want. The U/D ratio can be adjusted 10 : 0 1: 3 (refe r to th e fi gure b elow .
LC- XC 1 10 ADJUSTABL E FE ET Picture tilt and projection angle can be adjusted b y rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 9.0 degrees. 1 Lift the f ront of the projec tor and pull t he F EET LO CK LATCHES on both sides of th e projector.
LC- XC 1 11 This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side f or connecting computers and video equipment. Refer to the f igur e on pages 11 to 14 and connect properly.
LC- XC 1 12 OUTPUT TERMINALS RESET BUTTON R/C JACK Th is pro j ec t or u s es a m icr o pr o c es sor to co ntr o l t he W hen u si ng t h e W ire d / W ire le s s unit. Oc casiona lly, the m icr o proces sor m a y Rem ote Control Un it as t he W ired malfunc tion and need t o be res et.
LC- XC 1 13.
LC- XC 1 14.
LC- XC 1 15 INDICATORS TOP CONTROL.
LC- XC 1 16 LASER POINTER FUNCTION This remote c ontrol em its a laser b eam as the Laser Point er f rom the Las er Lig ht W indow, W hen the LASER button is pressed, the laser light goes on. And when the button is press ed m ore than 1 m inute or the but ton is release d, lig ht goes off .
LC- XC 1 17 Remote Control Batteries Installation • • • Do not us e a ne w batte ry with a us ed batt ery. • Avoid contact with wate r or liqui d. • Do not ex pose the Rem ote C ontrol Un it to m oistur e, or heat. • Do not dr op the rem ote control unit.
LC- XC 1 18 OPERATING ON-SCREE N MENU HOW TO OPERATE ON-SCREEN MENU You can c ontrol and adj ust this projec tor thr ough t he O N- SCREEN MENU. R efer to t he foll owing pag es to operate eac h adjustm ent in th e ON-SC REEN MENU. Move the p ointer (s ee the NOT E below) b y press ing PO INT button(s) on the T OP CON TRO L or the REMO TE CONT ROL.
LC- XC 1 19 MENU BAR MENU BAR IN COMPUT ER MODE Press MENU BUTTON while in Computer mode. MENU BAR IN VIDEO MO DE Pr ess MENU BUTTON while in Video Mode .
LC- XC 1 20 TURNING ON THE PROJEC TOR 1. Complete the p eripher al connec tions ( with Com pute r, VCR, etc.) bef ore turn ing on th e projector . (Refer to “CONN ECTIN G T O THE PROJ ECT OR” on Pag es 11- ~14 f or connecting t hat equ ipm ent.
LC- XC 1 21 ZOOM ADJUSTMENT 1 Press the Z OOM ! / " button (s) on the Top Con trol or on the Remote Contro l Unit. T he m ess age “Zoom ” is displa yed.
LC- XC 1 22 KE Y STO NE ADJU S TME NT If the picture has keystone distortion, correct image with KEYSTO NE adjustm e nt. 1. Press the KEYSTONE ! / " button on t he R emote Contr ol Unit or sele ct the Keys tone o n the S CREEN MENU . (Refe r to page 31, 35.
LC- XC 1 23 DIRECT OPERAT ION Press the VOLU ME (+1 —) button(s) on the Top Control or on the Remote Contro l Uni t to adjus t the v olum e. The Vol um e dialog box app ears on t he sc reen for a few secon ds. (+) button to inc reas e the v olum e, and (—) button decrea sing.
LC- XC 1 24 DIRECT OPERAT ION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit. MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POIN T LEFT /RIGHT butto ns to s elect Computer and press the SELECT but ton.
LC- XC 1 25 COMPATIB LE COMPU TER SPEC IFICATIO NS Basically this projector can accept the signal from all computers w ith the V, H-Frequency mentioned below and less than 180 M Hz of Dot Clock. W hen the input si gn al is from the COMPUTER I NPUT- i (DIGIT AL) terminal, refer to the chart below.
LC- XC 1 26 This Projector can automatically tune t o the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from th e standard ones and may not be tuned by the M ulti-Scan system of this projector.
LC- XC 1 27 The num ber of the total ver tical lines. Adjust th e num ber to m atc h the im age of your persona l c om puter . The num ber of the total d ots in one h orizon tal per iod. Adjus t the num ber to m atch the im age of your com puter. Adjustm ent of the hor izonta l or ver tical p icture posit ion.
LC- XC 1 28 1 Press the MENU bu tton an d the O N-SCREE N MENU will appear. Pres s th e POINT LEFT /RIGHT buttons to se lec t IMAGE an d press the SEL ECT butto n. Anot her dia log box IMAGE MENU wil l appear . 2 Press the POINT DOWN butt on and a red-arr ow ic on wil l appear.
LC- XC 1 29 NORMAL FU NCTION The normal picture level is preset on this projector at the factor y and can b e restore d an ytim e you press the NO RMAL button (located on the Top Control or on the Remote Control Unit). The “Stand ard” d ispla y will be d ispla yed on th e scr een f or a few seconds.
LC- XC 1 30 The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. 1 Press the MENU button and the ON-SCREEN MENU appear. Press the POINT LEFT/RIGHT buttons to select POSIT ION and pr ess the SELECT button .
LC- XC 1 31 This projector has a picture screen resize fu nction, which enables you to display the desirable image size. 1 Press the MENU button and th e ON-SC REEN ME NU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN ~ and press the SELECT button.
LC- XC 1 32 DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO butto n on th e Rem ote Cont rol Unit. ME NU OPER AT ION Press the MENU button and the ON-SCREEN MENU will appear. Pres s th e POINT LEFT /RIGHT buttons to s ele ct Video and press the SELECT but t on.
LC- XC 1 33 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELEC T button. Anot her dialog box VIDEO SYSTEM MENU will appear. 2 Press the POINT DO W N button and a red-arrow icon w ill appear.
LC- XC 1 34 1 Press the MEN U button and the ON-SCR EEN M ENU will appear. Pres s th e POINT LEFT /RIGHT buttons to se lec t IMAGE an d press the SEL ECT butto n. Anot her dia log box IMAGE MENU wil l appear . 2 Press the PO INT DOW N button and a re d-arro w icon will appear.
LC- XC 1 35 NORMAL FU NCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit) . The “Standard” display will be displayed on the screen for a few seconds.
LC- XC 1 36 1. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING MENU will appear. 2 Press the POINT DOW N button an d a red- arro w icon will appear.
LC- XC 1 37 Cei ling W hen this func tion is “ On, ” the top / bottom and the left / r ight re versed picture is pro vided to pr ojec t the im age f rom a ceiling m ounted projec tor. Rear W hen this func tion is “On,” the lef t / right reversed picture is provided to pro ject th e ima ge to a rear proje ction screen.
LC- XC 1 38 The W ire less R emote C ontrol Unit is no t only able to opera te th e proje ctor b ut also usab le as a wi reless mouse for most Personal Computers. T he POINT butt ons and the two CLICK buttons are used for the wireless mouse operation.
LC- XC 1 39 TEMPERATURE WARNING INDICATOR WARNIN G TEM P. Ind icator flash es red wh en the interna l temp eratu re of the p rojecto r exce eds th e nor mal temper ature. T he Indicator stops flashin g when t he te m perature of the projec tor r eturns to norm al.
LC- XC 1 40 LAMP REP LACEME NT When the li fe of the La mp of th is p rojecto r draw s to an end, the LA MP R EPLACEM ENT indi cator ligh ts yel lo w. W hen the im age b ecom es dark or the c olor of the im age bec om es unnatur al, repl acem ent of the Lam p is required.
LC- XC 1 41 CLEANING ThE PROJEC TIO N LENS Follow these steps to clean the projection lens: 1 Apply a non-abrasive camera lens cleaner to a s oft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh che micals might scratch the lens.
LC- XC 1 42 Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you hav e connected the projector to your equipment as descri bed in the section “CONNECTI NG THE PROJECTO R” on pages ii 14.
LC- XC 1 43 Problem: Tr y these Solution Remote Co ntrol Un it d oes no t wor k Check the batte ries. Check the ALL- OFF sw itch on th e Remo te Con trol Unit is se t to “ON.”. Make sure nothing is between the Remote Receiv er and the Remote Control Unit.
LC- XC 1 44 Projector Type Multi-m edia Pr ojec tor Dimensions (W x H x D ) 12.44” x 6.46” x 18.9” (31 6 mm x 164mm x 480mm) Net Weight 20.3 lbs (9.2 kg) LCD Panel System 1 3” T FT Active Ma trix t ype, 3 p anels Pane l Resolu tion 1024 x 768 dots Number of Pixels 2,359,296 ( 1024 x 768 x 3 pane ls) Color System PAL, SECAM, NTSC, NTSC4.
LC- XC 1 45 CONFIGUR ATIONS OF THE TER MINAL S COMPUTER I NPUT-1 TERMINAL (ANALO G) Terminal : HDB1 5-PI N Connect the disp la y output ter m inal of the c om puter to this term inal wit h the VG A Cable (supp lied) . W hen connec ting the Macint osh com puter , the MAC A dapter ( suppli ed) is requir ed.
46 EIKI INTERNATIONAL, INC. 26794 Vista Terrace Dri ve, Lake F orest, CA. 92630- 8113, U.S.A . TEL (949) 4 57-0200 FA X (949) 457-7878 ElKI CANADA 865 Heritage Dri ve P.
Ein wichtiger Punkt beim Kauf des Geräts Eiki LC-XC1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eiki LC-XC1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eiki LC-XC1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eiki LC-XC1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eiki LC-XC1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eiki LC-XC1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eiki LC-XC1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eiki LC-XC1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eiki LC-XC1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
