Benutzeranleitung / Produktwartung AP10001B des Produzenten EdgeStar
Zur Seite of 23
Portable Air Conditioner Owner’s Manual For more information on other great EdgeStar products on the w eb, go to http://www.edgestar.com AP10001B.
i Important Safety Information Improper handling can cause serious d amage to the appliance and/ or to the user. Please read the following safety information. Your portable air conditioner is suppli ed with a Leakage-Cu rre nt Detection and Interruption (LCDI) safety plug.
EdgeStar Portable Air Conditioner ii Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ..................................................................................
1 Introduction Thank you for purchasing this EdgeStar portabl e air conditioner. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will prov ide the customer support needed to nurture that relationship.
EdgeStar Portable Air Conditioner 2 Parts Identification Back View Front View Control Panel Front Air Vent/ Louver Handle Caste r Pre-filte r A ir Intake Exhaust Outlet Lower Drain Valve Oval Window K.
3 Installing the Carbon Filter Your EdgeStar portable air conditioner ships with a pre- filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from t he air. It is recommended you replace the carbon filter every two to three months, or as needed.
EdgeStar Portable Air Conditioner 4 Window Kit Installation Instructions You must vent your portable air conditioner when running in it cooling mode. Your unit includes a window exhaust kit that can be used to vent the unit out a window. Before you begin, make sure you have all the parts necessary for installation.
5 Installing the window plates 1. Open your window and pl ace the window kit with grooved side facing outward on t he window sill. Then, slide the window kit plate to fit the width of the window. You can use screws to secure the window kit plate from sliding.
EdgeStar Portable Air Conditioner 6 Attaching the oval adapter to the exhaust hose 3. Attach the oval adapter to the hose: A. Extend the end of the exhaust hose B. Thread the duct connector onto the hose by turning it clockwise until it stops. 2 0 ” 4.
7 After you have installed the ex haust hose and window kit, you can plug in your portable air condi tioner and start using it. Connecting the exhaust hose to the unit Connecting the oval adapter to the window kit 5. Align the slots on the hose connector to the tabs and snap into the back of the unit.
EdgeStar Portable Air Conditioner 8 Your portable air conditioner is designed to exhaust condensate water that is collected from the air. This water, in either gaseous or droplet form, will be expelled out the exhaust port of the unit. Please take this into account when deciding how to vent it.
9 Draining the Unit The unit will need to be drained if set to dehumidify mode. When the portable air conditioner is in cooling mode, it will remove moisture from the air. The condensed water from the air will be collected in an internal reservoir and will be evaporated and exhausted out of the exhaust hose.
EdgeStar Portable Air Conditioner 10 Control Panel Overview Button Function Power Powers the unit on or off. Mode Changes between auto, cool, dehumidify and fan modes. The indicator light will turn on next to the mode you set. Fan Sets the fan speed. The High, Medium, or Low indicator light will turn on next to the fan speed you set.
11 Operating the Control Panel Use the Power button to turn the portable air conditioner on and off. Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used mode/settings once power is restored. The compressor will restart after 3 minutes.
EdgeStar Portable Air Conditioner 12 The Fan button is used to change the fan speed between High Medium, Low and Auto while in Cooling and Fan Only modes. Press the Fan button to select the fan speed. The LED indicator light ne xt to the High, Medium, or Low will light up.
13 Using the Remote Control The remote control can be used instead of the control panel to remotely operate your portable air conditioner. The functions on the remote are the same as on the control panel.
EdgeStar Portable Air Conditioner 14 Normal Sounds Y our new portable air conditioner may make sounds that are not familiar to you. Most of the sounds that are made are normal. Hard surfaces like the floor , walls can make the sounds seem louder than they actually are.
15 Use a soft dry cloth to wipe the body clean. If necessary, use lukewarm water to dampen a cloth to clean the unit. Use a soft bristle brush to clean bet ween the vents.
EdgeStar Portable Air Conditioner 16 Troubleshooting Follow the troubleshooting guide bel ow to resolve common issues. Issue Possible Cause Solution My air conditioner is not functioning at all Unit i.
17 Troubleshooting continued Issue Possible Cause Solution My air conditioner is not cooling at all Unit is not operating in cooling mode Set the unit to be in cooling mode, and lower the set temperature (pg.
EdgeStar Portable Air Conditioner 18 Specifications Description of product: Portable Air Conditioner Model: AP10001B Voltage/Frequency: AC 115V~60Hz Input Power: 1125W Current: 10.
19 EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defecti ve workmanship and materials, subject to any conditions set f.
EdgeStar Products Box 81336 Austin, TX 78708-1336 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download own er’s manuals, access additional troubleshooting resources, and obta in more information on other great EdgeStar products on the web at: http://www.
Ein wichtiger Punkt beim Kauf des Geräts EdgeStar AP10001B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie EdgeStar AP10001B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EdgeStar AP10001B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EdgeStar AP10001B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EdgeStar AP10001B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EdgeStar AP10001B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EdgeStar AP10001B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EdgeStar AP10001B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EdgeStar AP10001B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
