Benutzeranleitung / Produktwartung CD7200 mkII des Produzenten Eclipse
Zur Seite of 119
Owner's Manual / Man uel de I'utilisateur / Manual del propietario Nous vous remercions d'a voir acheté ce récepteur . V euillez lire ce manuel afin d'utiliser v otre appareil correctement. Nous vous recommandons de conserver ce manuel dans un endroit sûr afin de pouvoir le consulter ultérieurement.
2 For your s afety in using t he CD7200 mk II For your safety in using the CD7200 mkII For your safety in using th e CD7200 m k II W arnings and caution signs, illustra ted belo w , are posted throughout th is manual as well as on the CD7200 mkII.
For your safety in using t he CD7200 mkII 3 I ● Air bags are vital safety equipment. Never install the main unit in a way which will alter air bag wiring or interfere with air bag deployment. Air ba gs must function pro perly in the event of an accident.
4 For your s afety in using t he CD7200 mk II CAUTION 1 2 ● Wiring and installing this main unit requires expertise and experience. Professional installation is recommended. Consult with your dealer o r a professional installer . Incorrect wiring may damage the ma in unit or interfere with safe veh icle operation.
For your safety in using t he CD7200 mkII 5 I ● When inserting batteries into the remote control, be careful with the po larity (positive/ negative), and insert them as indicated. If the batt ery polarities are incorrect, injuries and pollution to the surrou ndings may result from b attery ruptures and leakage.
6 For your s afety in using t he CD7200 mk II.
7 I II III IV V VI VII XVI VIII IX X XI XII XIII XIV XV XVII XVIII XIX XX XXI XXII XXIII Table of Contents For your safety in using the CD7200 mkII ............... ................. 2 Operating precautions ........ ....................................
8 Table of Contents For your safety in using the CD72 00 mkII ............. ................ ............... 2 Operating precautions .. ................ ................ ............. ................ .......... 14 Notes on operation .................
9 Table of C ontents SCAN/REPEAT/RANDOM ........................................................................................... 28 FOLDER SCAN/REPEAT/RANDOM ............................... ............................................. 29 DISPLAYING TITLE .
10 Table of Contents The Bluetooth hands-free function .... ................ ................... ............. 48 About the Bluetooth hands-free function ...................................................................... 48 About the Bluetooth specifications .
11 Table of C ontents How to operate the Sound Adjustme nt Mode ............ ............. .......... 66 About Sound Adjustment Mode .................. .................................................................. 66 About parametric EQ .........
12 Table of Contents How to operate the main unit with an optional CD cha nger connected ................ ................................................................ ............. 92 Listening to a CD ........................................ ....
13 Table of C ontents How to operate the main unit with an optional Int erface Adapter for iPod connected.............. ................. ................ ................ .............. 104 Listening to iPod music files (If an iPod is not connected) .
14 Operating pr ecautions Operating precautions Operating p recautions <Y our CD7200 mkII will per form well over a long per iod of time through corr ect handling and care.> Notes on operation • For your safety , play only at volume le vels that allow o utside sounds to be heard.
15.
16 Names of co ntrols and part s Names of controls and p art s Names of contr ols and parts Front view No. Button Name/Working a [ e (OPEN/EJECT)] button Opens/closes front panel and ejects CD. b [VOL] button Adjusts vol ume. c [SELECT] button Selects radio station and CD tracks.
Names of controls and part s 17 III No. Button Name/Working g [Release] button Detach the right end of the front panel from the body of the main unit. h [MUTE] button Activates and deactivates mute. i Buttons [1] to [6] Selects radio preset channels and performs disc mode functions.
18 Names of co ntrols and part s T urning the power on and off When the power is turned on, the state used when the power was turned off such as CD and tuner playback is restored. When the vehicle has no ACC positio n on the ignition switch, care is needed when turning off the main unit.
Names of controls and part s 19 III Switching Rot ary Modes The [VOL] button can be switched to other functions. When the rotary mode is set to ON , you can switch from the volume adjustment function to the following functions b y pressing the [VOL] button.
20 Names of co ntrols and part s Using a shortcut The Menu Selection mode will be activated. The mode for the shortcut created will be displayed. Switching screen The screen's display pattern can be switched. When the button is pressed, the screen pattern changes display type in the following order .
Names of controls and part s 21 III Det aching the front p anel Using the detachable panel The front panel of the main unit can be removed. By removing this panel when you leave the vehicle, you can prevent the theft of the main unit. How to remove the detachable panel The right end of the front panel detaches from the body of the main unit.
22 Operation How to operate the CD/MP3/WMA player Operation About comp act discs • The signal recorded o n a compact disc is read by a laser beam, so nothing touches the d isc surface. A scratch on the recorded surface or a badly wa rped disc may cause deteriorated sound quality or intermittent playbac k.
How to operate the CD/MP3/WMA p layer 23 IV About CD accessories About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels.
24 Operation About MP3/WMA ATTENTION The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited.
How to operate the CD/MP3/WMA p layer 25 IV ID3/WMA tag MP3/WMA files have an “ID3 / WMA T ag” that allows input of information so tha t data such as song title and artist can be saved. This main unit supports ID3v . 1.0, 1.1 and WMA tags. Media Media capable of playing MP3/WMA includes CD-R and CD-RW discs.
26 Operation File names Only files with the MP3/WMA file extension “. mp3”, “.wma” can be r ecognized as MP3/WMA and played. Be sure to save MP3 files with the “.mp3” file extension. Be sure t o WMA files with the “.wma” file extension.
How to operate the CD/MP3/WMA p layer 27 IV Listening to CD The front panel opens. If a disc ha s already been l oaded, the disc will be ejected. The front panel automati cally closes and the CD will immediately start playing. ATTENTION • Pla yback may be intermittent when there is a scratch on a CD or when the recorded side is dirty .
28 Operation ATTENTION For details on how to operate the rotary mode function, refer to page 19. FOLDER UP/DOWN MP3/WMA (Up): Selects the next folder .
How to operate the CD/MP3/WMA p layer 29 IV MP3/WMA : The main unit will play the first 10 seconds of each file loca ted in the same layer as the folder currently being played. Press the button again to cancel thi s operation. : Repeating the same file.
30 Operation MP3/WMA : Each time the butt on is pressed, the text will be displayed in the fo l- lowing or der . Folder Name/File Name * → Ta g *: A maximum of 14 characters can be displayed in the display area. The remaining characters can be displayed by scrolling.
31.
32 Operation How to operate the USB music file player Operation About playable USB memory st andards • Supported File System: F A T 12/16/32 • Playable Audio Format: MP3/WMA • Max.
How to operate the USB music f ile player 33 V • Supported channel modes: monaural, stereo Format of USB memory The USB memory format must be ISO9660 Level 1 or Level 2. S tandards are as follows: • Maximum directory layers: 8 layers • Maximum characters for folder names/file names: 128 (including “.
34 Operation How to operate the USB music file player When a USB memory or a digital audio player with a USB t erminal is connected to a USB co nnector , music files can be played from the USB memory .
How to operate the USB music f ile player 35 V Listening to music files in USB memory For details, refer to "Switching Audio Modes" on page 18. The procedure for play ing music is the same as that are used to play CDs. For details, refer to "How to operate the CD/MP3/WMA player" (page 27 - 29).
36 Operation The Bluetooth audio function Operation About the Bluetooth audio function The use of Bluetooth wireless communicatio n technology enables a Bl uetooth-compatible portable audio player (hereafter called "a portable device" ) to be used as a source for th e main unit.
The Bluetooth aud io function 37 VI What is Bluetooth? Bluetooth is a form of short-range wireless communication technology , used to connect cell phones and personal computers. This technology enables hands-free calling and data transmission between Bluetooth-compatible devices.
38 Operation Selecting the music you want to listen to Right: Advances to the next track. Left: Returns to the beginning of the track being played. ATTENTION Press the [SELECT] (Left) button repeatedly to return to previous tracks. Fast Forward/Rewind Right: Fast forwards.
The Bluetooth aud io function 39 VI The portable device is set as a Bluetooth audio source. ATTENTION • The Bluetooth audio ( BT -Audio) function can only be selected in the audio mode when the BT Audio Set selection mode is set to ON. • The default setting for the Bluetooth audio mode is OFF (BT - Audio selection is disabled).
40 Operation ATTENTION If you do not want to cancel the connection, press the [RTN/BAND] button. The BT Audio Set selection mode is activated again. The main unit is now di sconnected from the portable device. ( and disappear from the display . However , will not disappear while Blutooth hands-free is connected.
41.
42 Operation How to operate the tuner Operation ATTENTION • If stations have been stored in memory , pressing a button from [1] to [6] will enable you to select a station. (Refer to "Manually storing stations into memory" on page 43.) Listening to the tuner For details, refer to "Switching Audio Modes" on page 18.
How to operate the tuner 43 VII Automatically storing st ations into memory . (The automatic preset mode: ASM) The automatic preset mode starts. “ASM ON” will appear on the disp lay , and stations are automatically entered in memory under buttons [1] to [6].
44 Operation Changing the reception sensitivity for automatic scanning The main unit lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitiv ity modes available for this main unit are AUTO mode and DX mode.
45.
46 Operation How to use the remote control Operation Precautions in use of the remote control • Be careful when handling the control, especially bec ause it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.
How to use the remote co ntrol 47 VIII Replacing the battery Use two AAA size batteries. No. Button Name/Working f [ d PRESET CH u ] buttons [ d DISC u ] buttons Selects radio preset channels and performs disc mode functions. g [MODE] button Switches audio source mode.
48 Operation The Bluetooth hands-free function Operation About the Bluetooth hands-free function The use of Bluetooth wireless communicatio n technology enables a Bluet ooth-compatible cell phone to be able to be used with the main unit.
The Bluetooth han ds-free function 49 IX What is Bluetooth? Bluetooth is a form of short-range wireless communication technology used to connect cell phones and personal computers. This technology enables hands-free calling and data transmission between Bluetooth-compatible devices.
50 Operation ATTENTION A maximum of 28 digits can be input per phone number . If you input an incorrect number , move the cursor to that number , and input the correct number by following S tep 3. The input number confirmation screen appears on the display .
The Bluetooth han ds-free function 51 IX Making a call using the phonebook Calls can be made using the phone numbers stored in the phonebook of the main unit. The phone number and name stored in the phonebook appear on the display to confirm the number to be dialed.
52 Operation Adjusting the voic e volume Adjust the voice volume while the call is in progress. T o increase the volume: T urn the [VOL] button to the right .
The Bluetooth han ds-free function 53 IX Registering a cell phone Cell phones can be registered in the main unit. There are two methods that can be used to register a cell phone in the main unit. The cell phone itself can be used or search for cell phones using the main unit.
54 Operation "Searching" will be displaye d. ATTENTION "F AILED" will be displayed if cell phone cannot be registered. Repeat Search procedure. ATTENTION Each time the [SCREEN/TEXT] button is pressed, the display ch anges in the following way , and you can register the cell phone using the device address (BD ADD) as well.
The Bluetooth han ds-free function 55 IX The "W aiting" message ap pears on the display . The cell phone i s now connected to the main unit. ( and appear on the display .) "F AILED" will be di splayed if registration is not successful.
56 Operation ATTENTION • If th ere is no space remaining in the main unit for phonebook data, the "MEMORY FULL" message appears on the display when an attempt is made to transfe r data from the cell phone. • Some cell phones cannot transfer all of th e phonebook data at once.
The Bluetooth han ds-free function 57 IX Displaying device informati on for the main unit The name of the device (ECLIPSE BT), the passcode (default setting - 1234), and the BD ADD (device address) can be displaye d. The name of the d evice and Passcode will be displayed.
58 Operation Outgoing C alls : Outgoing call histo ry Incoming Calls : Incoming call history If Outgoing Calls is selected "DELETE?" and "Outgoing Calls" will be displayed. If Incoming Calls is selected "DELETE?" and "Incoming Calls" will be displayed.
The Bluetooth han ds-free function 59 IX Right : The cursor moves to the right. Left : The cursor moves to the left. "NewPasscode?" will be displayed. 4 Press the [SELECT] (Right/Left) button to move the cursor . 5 Repeat Step s 3 and 4 to input the p asscode to enter the nex t digit.
60 Various Sett ings ESN security operating procedure Various Settings About ESN The main unit is equipped with ESN (ECLIPSE Security Network). A music CD (Key CD) which has been registered in the main unit, is necessary for ESN.
ESN security operating procedur e 61 X "CANCEL" will be displa yed and the CD will be ejected. ESN is now deactivate d. ATTENTION If a CD other than the Key CD is inserted, the registration cannot be cancelled. In this case, the “ERR” message is displayed for tw o seconds, and the CD playback mode is activated.
62 Various Sett ings “DISC” flashes on the display . Y ou will have five more attempts to insert correct disc. "OK" will be displayed fo r two seconds and then the C D will be ej ected.
63.
64 Various Sett ings How to operate the AUDIO CONTROL Various Settings Switching audio control modes V arious audio control modes may be fine-tuned using this procedure. Refer to Speaker Layout Settings for more information. Modes will switch in the order shown be low each time the button is presse d.
How to operate the AUDIO CONTROL 65 XI SVC Setting examples: The volume for the default FM mode (default valu e: 40) is used as a reference for storing th e differences in volume that have been set for each audio mode. *: The vo lume levels ca n only be set from 0 (min) to 8 0 (max).
66 Various Sett ings How to operate the Sound Adjustment Mode Various Settings About Sound Adjustment Mode The system has several features that allow you to adjust the acoustic characteristics inside the cabin.
How to operate the Sound Adju stment Mode 67 XII About parametr ic EQ A variety of materials are used inside a vehicl e to manufacture the seats and windows, and because these materials absorb and ref.
68 Various Sett ings About time alig nment With vehicle audio systems, the installation position of the speak ers and the position of the listener mean that the distances from the listener to the left and right speakers are almost always different.
How to operate the Sound Adju stment Mode 69 XII For example, when adjusting the HPF , frequencies that are lower than the specified frequency ar e progressively dampened, rather than simply not bei ng played back at all. The “ slope” adjustment function is the function that is used to adjust these dampeni ng characteristics.
70 Various Sett ings About E-iSERV Audio Customize The parametric equalizer , time alignment and cros sover setting can be adjusted directly using the main unit settings, or through the ECLIPSE webs ite.
How to operate the Sound Adju stment Mode 71 XII Switching the sound adjustment mode The Menu selection mo de is activated. The sound selection mo de is activated.
72 Various Sett ings When the 4-speaker layout is select ed When the 3 way speaker layout is selected ATTENTION It is not possible to set more than one band in the same channel and median frequency . Either change the median frequency of the current band, or change the median frequency of another band.
How to operate the Sound Adju stment Mode 73 XII The preset value is overwritten by the value set using the above steps. The time alignment and crossove r adjustments will also be sto red at this time. Selecting an equalizer mode from memory Press a preset button t o select the equalizer mode set in memory on the button.
74 Various Sett ings Displaying measurement results and save to USB memory Align the microphone wi th the actual ear position and attach it to the headrest or other appropriate fixture. (Attach the microphone using tape or string.) Connect th e USB memory if data is to be saved.
How to operate the Sound Adju stment Mode 75 XII ATTENTION • Refer to the follow ing for the method of calculating the delay time. A = (B-C) / 34 A:Delay time (ms) B:Distance from the listening posi.
76 Various Sett ings The slope can be set to “Pass”, “6dB/ oct”, “12dB/oct”, “18dB/oct” or “24dB/ oct”. Up: The slope becomes more gentle.
How to operate the Sound Adju stment Mode 77 XII Non-Fader Output settings (Output) Right: Monaural Left: St e r e o Speake r layout settings (SP Layout) Depending upon speaker layout, you can switch between 3-way and 4-speaker systems. (Select a system configuration before adjusting PEQ, time alignment or cross over .
78 Various Sett ings ATTENTION T o load data into the main unit, you have to make a special folder . For detail informatio n about how to make the folder , refer to the E- iSERV website. Reading custom mode Dat a (Custom Mode) V alues (PEQ, time alignment and crossover setting values) can be adjusted in the custom mode on the website.
79.
80 Various Sett ings Making changes with Di splay Adjustment Mode Various Settings This mode lets you adjust the display bright ness, change th e button illumination color , etc. Switching the Display Adjustment Mode The Menu selection mo de is activated.
Making changes with Display Adju stment Mode 81 XIII Changing display type (DISP T ype) Y ou can change the display type ( Background or S pectrum analyzer). The display type setting mode is activated. When the button is pressed, the setting item changes in the following order .
82 Various Sett ings Importing display dat a (DISP Dat a) Screens can be downloaded from the ECLIPSE website (E-iSERV) and used instead of the pre- set motion pictures.
Making changes with Display Adju stment Mode 83 XIII ATTENTION • When pla ying a music file in USB memory , E-iSERV dat a stored in the USB memory cannot be read into the main unit. • T o load data into the main unit, you have to make a special folder .
84 Various Sett ings Making changes with Function Mode Various Settings A variety of settings can be changed. Switching the Function Mode The Menu selection mo de is activated. The function mode is activated. When the button is pressed, the setting item changes in the following order .
Making changes with Function Mode 85 XIV The character will be inserted where the cursor is flashing. Right: Advances the cursor to the right. Left: Returns the cursor to the left. Up: Moves the character forward in its type. Down: Moves the character backward in its type.
86 Various Sett ings ATTENTION The clock display can also be turned on and off by pressing the button [6] while the power is turned off. Setting time (Clock Adjust) This main unit uses the 12-hour display notation. The clock setting mode is activate d.
Making changes with Function Mode 87 XIV The selected settings will take effect. Setting the steering remote function (U.S.A. only) The vehicle’s factory loaded steering remote becomes inoperable when the CD7200 mkII is installed.
88 Various Sett ings ATTENTION • T o load data into the main unit, you have to make a special folder . For detail informatio n about how to make the folder , refer to the E- iSERV website.
Making changes with Function Mode 89 XIV Compatibility with various switches The compatibility of the main unit's various modes and the steering remotes installed on your vehicle are as follows: .
90 Various Sett ings *1: Switch names chang e depending on ve hicle make and mo del. *2: If a SIRIUS/XM satellite radi o tuner (pur chased separately) is conn ected, categories can be switched when in the satellite m ode.
91.
92 About the optio nal unit How to operate th e main unit with an optional CD changer connected About the opti onal unit This section covers the operation of an optional CD changer that is connect ed to the main unit. Listening to a CD For details, refer to "Switching Audio Modes" on page 18.
How to operate the main unit with an optional C D changer connected 93 XV Repeating the same track (REPEA T) Pressing on the button for le ss than one second causes the chang er to repeat the track currently b eing played, until the b utton is pressed again.
94 About the optio nal unit How to operate the tune r with an optional HD Radio tuner connected (U.S.A. only) About the opti onal unit About HD Radio If the optional HD Radio tuner unit is connected, terrestrial digital broadcasts can be received.
How to operate the tuner wit h an optional HD Radio tu ner connected (U.S.A. only) 95 XVI In the [Auto] setting, th e selection is switched between digital and analog reception automati cally . In areas where digital reception is not possible, reception is automatically switched to analog to avoid loss of reception.
96 About the optio nal unit How to operate the tune r with an optional XM satellite radio tuner co nnected (U.S.A./CANADA only) About the opti onal unit About XM satellite radio If the optional XM satellite radio tuner unit is connected, satellite r adio br oadcasts can be received.
How to operate the tuner wit h an optional XM sa tellite radi o tuner connecte d (U.S.A./CANADA only) 97 XVII Operations during rota ry mode T urn to the right: T unes to higher channels. T urn to the left: T unes to lower channe ls. Category selection The channel can be selected from among categories such as ROCK and DANCE.
98 About the optio nal unit Preset channel scan This function enables the reception of all the channels in the preset buttons for five seconds each. [P SCAN] will appear on the display , and channels set in preset buttons [1] through [6] will b e received for five seconds each.
99.
100 About the optio nal unit How to operate the tuner with an optional SIRIUS satellite radio tuner co nnected (U.S.A./CANADA only) About the opti onal unit About SIRIUS satellite radio If the optional SIRIUS satellite radio tuner unit is connected, satellite r adio br oadcasts can be received.
How to operat e the tuner with an opt ional SIRIUS sa tellite radi o tuner connect ed (U.S.A./CANADA only) 101 XVIII Category selection The channel can be selected from among categories such as POP and ROCK. Consult the SIRIUS website for the details of the categories.
102 About the optio nal unit The main unit will stay tuned to the desired channel. Switching displays when using the SIRIUS satellite radio Each time the button is pressed the display item changes in .
103.
104 About the optio nal unit How to operate th e main unit with an optional Interface Adapter for iPod connected About the opti onal unit An iPod can be connected to the main unit using the optional Interface Adapter for iPod (iPC-106), allowing you to listen to iPod music files and opera te some iPod functions from the main unit.
How to operate the main un it with an optional Interface Ad apter for iPod connected 105 XIX Searching for a music file The iPod search mode can be operated from th e main unit. : The search mode is activated. : Search mode items are sele cted in the following order .
106 About the optio nal unit Repeating the same music file (REPEA T) : Pressing this button causes the iPod to repeat the music file cur- rently be ing played , until the bu tton is pressed again.
107.
108 About the optio nal unit Others About the opti onal unit Connecting a port able audio player to the AUX jack Use a commonly available accessory cable with an RCA connector or an optional AUX105 to connect a portable audio player to the AUX (auxiliary) jack of this system.
Others 109 XX Changing auxiliary input sensitivity The sensitivity of the auxiliary mode can be changed. The Menu selection mo de is activated. The function mode is activated.
110 Other informati on If you have a question: Other infor mation Check the items mentioned below before attempting to troublesho ot problems. Displayed information (for troubleshooting) The information listed in the chart below is displayed to show the status of the CD, USB memory , XM Radio, Sirius Radio, iPod, CD changer or Bluetooth, etc.
If you have a question: 111 XXI INFO 7 INTERNAL POWER SUPPL Y F A ILURE IS OCCURRING • Turn the ACC of f, and then turn it on again to resume th e operation. • If this condition persists, please cont act your dealer . LOAD The CD changer is in the process of verifying the presence of CDs after a magazine has been inserted int o the CD changer .
112 Other informati on When you think there is a malfunction A slight difference in operation may be mistaken for a malfunction. Please check the items in the following table first. If the unit does not work, even after the appropriate remedial action has been taken, please cont act your dealer .
If you have a question: 113 XXI Mode Problems Causes Remedial action Refer to page CD The disc cannot be inserted. The disc is ejected as so on as it is inserted. The disc cannot be ejected. The disc cannot be changed. Has an extra label or sticker been applied to the disc? Do not apply labels or stickers to the di sc.
114 Other informati on Sp ecifications Other infor mation <GENERAL> <FM TUNER> <AM TUNER> <CD SECTION> <USB MEMORY SECTION> Power Supply 14.4V DC (1 1-16V) Current Drain 3A Dimensions (W x H x D) In-Dash Main unit 7“ x 2” x 6-1/8“ (178 x 50 x 155 mm) Mass (weight) Approx.
Specifications 115 XXII <Bluetooth Audio> <Bluetooth Handsfree> <AUDIO AMPLIFIER> Bluetooth S pecification Bluetooth S pecification V er.2.0 Output Power class 2 (Max +4dBm) Profile A2DP V er .1.0 AV R C P Ve r . 1 . 0 Bluetooth S pecification Bluetooth S pecification V er.
116 Other informati on How to cont act customer service Other infor mation Should the product require service, please cont act the following Eclipse dealer near yo ur house. <U.S.A/CANADA> <AUSTRALIA> <MALA YSIA> <SINGAPORE> <KOREA> <T AIW AN> <INDONESIA> Fujitsu T en Corp.
How to contact customer se rvice 117 XXIII <THAILAND> Safe-T -Cu t (Thailand) Co., Ltd. 1 14/9 Soi Suwansawadi, Thungmahamek, Rama 4 Rd ., Sathorn, Bangkok 10120, Thailand.
118 Other informati on IMPOR T ANT RECORD YOUR “KEY CD (SECURITY CODE)” HERE... ST ORE YOUR “KEY CD (SECURITY CODE)”ALONG WITH YOUR OWNER'S MANUAL.
How to contact customer se rvice 119 XXIII.
Ein wichtiger Punkt beim Kauf des Geräts Eclipse CD7200 mkII (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eclipse CD7200 mkII noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eclipse CD7200 mkII - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eclipse CD7200 mkII reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eclipse CD7200 mkII erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eclipse CD7200 mkII besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eclipse CD7200 mkII verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eclipse CD7200 mkII. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eclipse CD7200 mkII gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
