Benutzeranleitung / Produktwartung SP-12 des Produzenten E-Mu
Zur Seite of 99
SP-12 SAMPLING PERCUSSION SYSTEM OWNERS MANUAL By Craig Anderton Version 2.3 © 1985 E- mu Syst ems, Inc. Scotts Valley , CA . All Right s Reserv ed.
CONTENTS © E-mu Systems, Inc. 1985 Page 2 Enhanced by The Emulator Archive 2002 www.emulator archive.com TA BLE OF CONT ENTS INTRODUCTION ..............................................................................................6 WHAT IS I T? ...
CONTENTS © E-mu Systems, Inc. 1985 Page 3 Enhanced by The Emulator Archive 2002 www.emulator archive.com 1N P LAY ING B ACK SE GM ENTS ..................................................................... 21 1O SE TT ING TEM PO.......................
CONTENTS © E-mu Systems, Inc. 1985 Page 4 Enhanced by The Emulator Archive 2002 www.emulator archive.com 3G CHANGING THE SON G DRUM SOUND MIX.............................................. 47 3H SETTIN G S ONG TEM PO ..................................
CONTENTS © E-mu Systems, Inc. 1985 Page 5 Enhanced by The Emulator Archive 2002 www.emulator archive.com 6C INTER NAL SYN C (SY N C 1) ........................................................................ 73 6D MIDI S YN C (SY NC 2) ..............
INTRODUCTION © E-mu Systems, Inc. 1985 Page 6 Enhanced by The Emulator Archive 2002 www.emulator archive.com INTRODU CTION WHAT IS IT SP-12 GROUND RULES SETTINGS AND VA LUE S THE TR ANSI TO RY N A TU.
INTRODUCTION © E-mu Systems, Inc. 1985 Page 7 Enhanced by The Emulator Archive 2002 www.emulator archive.com WHA T IS IT ? The SP-12 is t he latest member of E-m u’s family of high - technology musical instruments.
INTRODUCTION © E-mu Systems, Inc. 1985 Page 8 Enhanced by The Emulator Archive 2002 www.emulator archive.com SP-12 GROUND RULES Here are all the background terms you will need to know in order t o make sense o f the manual.
INTRODUCTION © E-mu Systems, Inc. 1985 Page 9 Enhanced by The Emulator Archive 2002 www.emulator archive.com SETTINGS A ND VA LUES There are two ways of altering t he SP-12’s parameters. One is to alter a slider setting this is typically done when chang ing levels, pitch, and so on.
INTRODUCTION © E-mu Systems, Inc. 1985 Page 10 Enhanced by The Emulator Archive 2002 www.emulator archive.com THE TRANSITORY NATURE OF SEGMENT MO DE Segment mode is the SP-12’s “scratchpad” where you w ork up rhythmic segments prior to combining them in songs.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 11 Enhanced by The Emulator Archive 2002 www.emulator archive.com P A RT 1: GE TTING RE A DY 1A SETUP 1B INSTA NT GRA TIF ICAT ION! 1C BACKGROUND: THE PE.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 12 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1A SETUP IMPOR TA NT!! Bef ore you tur n on your SP-12: There is a 115/230 Volt selector switch on the back of the SP-12, next to the ON/OFF switch.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 13 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1B IN STANT GRA TIFICA TION! Yes, the SP-12 is an extremely versatile device. But t hat versatility means that in order to learn about all the opt ions, you’ll have to spend a few hours with the SP- 12 and this manual.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 14 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1C BACKGROUND: THE PERFORMANCE MODULE This module is where you select drum sounds, tu ning, drum mix, and so on. All of these adjus tments reset to their de fault values w hen the SP-12 is turned off.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 15 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1E A DJUSTING THE MIX 1. Press the TUNE-MIX-MULTI switch (towards the upper left corner of the Performance module) until the MIX LED lig hts.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 16 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1F TUNING THE DRUMS/ CHANGING DECAY (SET-UP 18) 1.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 17 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1H ACCESSING/E XITING MULTILEVEL (SET-UP 1 2 & 13) 1. Activate the SET-UP module by pressing its button. It s LED will glow, and the displ ay will ask for a func tion from the l ist prin ted to the right of the SET-U P button .
GETTING REA DY © E-mu Systems, Inc. 1985 Page 18 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1I A CCESSING/EXITING M ULTIPITCH (SET-UP 11 & 13) 1. Activate the SET-UP Module by pressing its switch. Its LED will glow, and the displ ay will ask for a func tion from the l ist prin ted to the right of the SET-U P switch.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 19 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1J A CCESSING DYNA M ICS (SET-UP 14) Yes, the harder you hit the but tons the louder the sound.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 20 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1L AUDITIONING (SELECTING) A MIX (SET-UP 16) You may select an already defined dr um mix (see Section 1K) which will assig n the mix levels to the drum sounds in all f our banks.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 21 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1N PLA YING B A CK SEGMENTS You can record and play back 100 rhythm patterns called segments. These are numbered from 00 through 99. Several segments w ere loaded into the SP-12 at the factory; here is how to play them.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 22 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1O SETTING TEMPO The tempo may be v a ried from 40 to 240 B eats Per Minute. Segmen t tempo settings are “ remembered” by the SP-12 only w hile you are in segm ent mode.
GETTING REA DY © E-mu Systems, Inc. 1985 Page 23 Enhanced by The Emulator Archive 2002 www. emulator archive.com 1P PROGRA MMING THE METRONOME W hen play ing back or recording segments, you can program the metronome for a variety of differ ent beats.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 24 Enhanced by The Emulator Archive 2002 www. emulator archive.com P A R T 2: RECORDIN G SEGMENTS 2A OVERVIE W 2B ERASING A SEGM E NT 2C “DIMENSION.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 25 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2A RECORDING A SEGM ENT - OVERVIEW There are two ways to record a segment, r eal time and step time. I n both cases, recording init ially consists of: 1.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 26 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2B ERA SING A SEGMENT Erasing a segment clears out all existing drum sounds, and automatically re- dimensions the segment t o two measures of 4/ 4.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 27 Enhanced by The Emulator Archive 2002 www. emulator archive.com Part 1: Standard Dimensioning 1. Set the time sig nature by pressing TIME SIGNATURE. The display will probably show the 04/4 def ault t ime signature and a cursor will be f lashing under the first digit.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 28 Enhanced by The Emulator Archive 2002 www. emulator archive.com Part 2: Real-Time Dimensioning Real-time dim ensioning mode is useful when you want a segment’s length to be other than some number of whole measures and beats (i.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 29 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2D UNDERST ANDING AUTO CORRECT Auto correct lets you creat e patterns with perfect.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 30 Enhanced by The Emulator Archive 2002 www. emulator archive.com Fig. 2-3 This illustr ates an important point: Use the least amount of resolution needed.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 31 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2E SETTING AUTO CORRECT To set Auto Correct, the SP-12 must be in segment mode. The SP12 can be stopped or running (recording). 1. Press AUTO CORRECT.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 32 Enhanced by The Emulator Archive 2002 www. emulator archive.com b. Chang e tempo by pressing the TEMPO button. c. Chang e Auto Correct by pressing AUTO CORRECT and using the Left and Right Arrow buttons.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 33 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2G RECORDING A SE GM ENT IN STEP TIME Here is an alternat e way to record and edit drum sounds which is particularly helpful with unusual rhythms.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 34 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2H ERASING A SPECIFIC DRUM SOUN D W hen y ou ar e in segm ent mode and editing a segment, you may erase a drum/percussion sound w her ever it appears in the segment.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 35 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2J COPYING A ND APPENDING SEGMENTS You may copy a s e gment t o one or more other segments. F or exampl e, suppose y ou set up a great hi- hat and bass drum pa ttern in segme nt 54.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 36 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2K ADDING SWI NG W hile in segment mode, you may specify that a segm ent have a particular rhythm ic swing to it.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 37 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2L SWA PPI NG DRUM SOUNDS After recording t he segment, you might come to t he realization that a par t would sound better with, say, the Electr ic Snare than the reg ular Snare.
RECORDING SEGMENTS © E-mu Systems, Inc. 1985 Page 38 Enhanced by The Emulator Archive 2002 www. emulator archive.com 2N CLE ARING THE MEMORY If you reach a mem ory FULL condition (as indicat ed by the display), save what you have on cassette or disk.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 39 Enhanced by The Emulator Archive 2002 www. emulator archive.com P A R T 3: CRE ATING A SONG 3A CREAT ING A SONG: OVER VIEW 3B SELECTING A SONG 3C CH .
CREATING A SONG © E-mu Systems, Inc. 1985 Page 40 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3A CRE ATING A SONG: OVERVIEW There are two ways to create songs using segm ents. One way is to simply run the SP-12 and key in each segment just before you want it to appear.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 41 Enhanced by The Emulator Archive 2002 www. emulator archive.com Note: W hen going to song mode from se gment mode, segment level and tempo settings are not transferred over to t he song.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 42 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3C CH A INING SEGM ENTS TOGETHER As mentioned in the overview, it’s best to write out the order of segments you w ant to program into a song.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 43 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3D ENDING A SONG After programming your song, you have several ways to end it.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 44 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3E EDITING SONGS (STEPPING, INSERTING, DELETING) 1. Stepping: To change a song step, locate the step w ith the Rig ht Arrow and Left Arrow buttons.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 45 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3F USING REPEA TS You may enclose a segment, or group of segments, inside repeat instructions t o repeat the segment(s) a selected number of times.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 46 Enhanced by The Emulator Archive 2002 www. emulator archive.com W e can sim plify this by using the repeat function: Song Step # Segment to be Played.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 47 Enhanced by The Emulator Archive 2002 www. emulator archive.com 8. When you reach step 13, press REPEAT to end the repeat, and then press 05 to indicate that you want segments 65, 66, 67, and 68 repeated five times.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 48 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3H SETTING SONG TEMPO Each song can have its own progr ammed tempo from 40 to 240 Beats Per Minute. 1. To change tempo (the SP-12 may be stopped or running and in or out of’ EDIT mode), press TEMPO.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 49 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3I PROGRA MM ING TEMPO CHA NGES WITHIN A SONG The tempo change feature is very handy if you want to program the temp o to speed up or slow down at specific places in the song.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 50 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3J JUMP ING TO A SUB-SONG At any point in a song, you m ay jump to another song. This song will play thr ough in its entiret y, at which point you will ret urn to the first song at the same point at which you left it.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 51 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3. W hen the display shows the desired trigger value, press ENTER.
CREATING A SONG © E-mu Systems, Inc. 1985 Page 52 Enhanced by The Emulator Archive 2002 www. emulator archive.com 3M EFFICIENT USE OF MEMORY The more eff iciently you u se memory, the more sp ace you’ll ha ve available for storing al l those wonderful drum p atterns.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 53 Enhanced by The Emulator Archive 2002 www. emulator archive.com P A R T 4: S AMPLING YOUR OWN SOUNDS 4A SA MPLING: AN OVERVIEW 4B SETTING LE.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 54 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4A S A M PLING: A N OVERVIEW The SP-12’s sampling capabilities are pret ty staggering. Bank 4 has eight sounds (User 1 through User 8) dedicated to sampled sounds.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 55 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4B SETTING LEVELS PRIOR TO SA MPLING There are two Sample module functions involved in level setting: VU Mode (SAMPLE 1) and Level (SAMPLE 3) .
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 56 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4C ASSIGNING THE SA M PLE The SP-12 default assignment places the sampled sound on the lowest available empty user number, with the sound appearing on output channel 7 o r 8.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 57 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4E SETTING THE SAMPLE LENGTH Once sampling starts, the SP-12 will normally sample unt il it runs out of memory or is stopped (Section 4F).
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 58 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4. If you are not satisfied with the sample, try again by keying in 6 to re-sample the sound. 4G DELETING A USE R SOUND Recording over a User Sound will erase the previous User Sound contents.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 59 Enhanced by The Emulator Archive 2002 www. emulator archive.com 4H M ODIFYING A S AMPLE VIA TRUNCATION AND LOOP Truncation shortens a Voice’s length by trimming off parts of the beginning and/or end.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 60 Enhanced by The Emulator Archive 2002 www. emulator archive.com 6. Looping can be set at the same time as t runcation, or you can loop a previously truncated sample. Looping marks off a section (called a loop) of a User Sound.
SAMPLING YOUR OWN SOUNDS © E-mu Systems, Inc. 1985 Page 61 Enhanced by The Emulator Archive 2002 www. emulator archive.com Fig. 4-1 Note: Act ivating SET-UP and selecting SPECIAL FUNCT ION 19 set s a default decay for all sounds (as set by Slider 1).
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 62 Enhanced by The Emulator Archive 2002 www. emulator archive.com PA R T 5: SA VI NG YO UR DA TA 5A BACKGROUND: S AVING DATA 5B GENER AL CARE AND HA.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 63 Enhanced by The Emulator Archive 2002 www. emulator archive.com 5A B ACKGROUND: SAVING DATA Since you spend a lot of time wor king on segments, songs, and sampled sounds, you should spend the small amount of time necessary to save them.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 64 Enhanced by The Emulator Archive 2002 www. emulator archive.com The SP-12 requires double-sided, double-density, 48 tracks per inch (TPI) 5.25” floppy disks. Cassettes should be high-quality data cassettes, not standard audio cassettes.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 65 Enhanced by The Emulator Archive 2002 www. emulator archive.com To write-protect a cassette, knock out the little t abs on the back of the case as shown in Fig. 5-3. These can be covered over with ma sking tape lat er if you want t o “un- write-protect” them.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 66 Enhanced by The Emulator Archive 2002 www. emulator archive.com 5C HOOKING UP THE 1541 DISK DRIVE OR CASSETTE 1. Power off both the SP-12 and t he 1541. 2. Patch t he disk cable from the plug above the 1541’s fuse post to the SP-12’s rear panel disk jack (see Fig.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 67 Enhanced by The Emulator Archive 2002 www. emulator archive.com Gently push the disk all the way in until it can go no f urther, then push the latch downward until, at the end of its travel, it pops f orward somewhat.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 68 Enhanced by The Emulator Archive 2002 www. emulator archive.com 5E DISK AND CA SSETTE OPERA TIONS Cassettes and Disks have nine operations in common, as prin ted in the Cassette/Disk module. Formatt ing applies only to disks.
SAVING YOUR DA T A © E-mu Systems, Inc. 1985 Page 69 Enhanced by The Emulator Archive 2002 www. emulator archive.com Verify Sequences Disk: Key in 2 then 7 Cassette: Key 1 then 7 After saving sequences, run this verify function to make sure that the data w as saved correctly.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 70 Enhanced by The Emulator Archive 2002 www. emulator archive.com PART 6: MIDI, SYNC, & SMPTE 6A MIDI CHANNEL AND MODE SELE CT (SET-UP 22) 6.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 71 Enhanced by The Emulator Archive 2002 www. emulator archive.com OVERVIEW The SP-12 includes several MIDI f unctions and synchronization options. W e will describe MIDI options first, t hen move into synchronization.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 72 Enhanced by The Emulator Archive 2002 www. emulator archive.com The following table shows which Em ulator II keyboard notes trigg er which SP- 12 drum sounds (o f course, other MIDI keyboards may also be used).
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 73 Enhanced by The Emulator Archive 2002 www. emulator archive.com 6B B ACKGROUND: SYNCHRONI ZATION The SP-12 can synchronize to one of several different tempo references: Internal clock, external click track, MIDI timing messages, or SMPTE tim e code.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 74 Enhanced by The Emulator Archive 2002 www. emulator archive.com Note: If for some reason the MIDI device does not send start/stop commands but does provide timing information, you can set the SP-12 to “ready” mode prior to receiving the MDI signal.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 75 Enhanced by The Emulator Archive 2002 www. emulator archive.com Note: The MIDI output “tracks” t he SMPTE output, so if you are driving, say, a MIDI sequencer from the SP-12 MIDI OUT, the sequence w il l “fast-forward” along with the SP-12.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 76 Enhanced by The Emulator Archive 2002 www. emulator archive.com 6G WR ITING SMPTE TIME CODE ON TA PE The SP-12 is a SMPTE tim e code generator that can write SMPTE time code on tape (typically one track of a multitrack recor der), to which the SP-12 can later synchronize.
MIDI, SYNC & SMPTE © E-mu Systems, Inc. 1985 Page 77 Enhanced by The Emulator Archive 2002 www. emulator archive.com 6H WRI TING A 24 PPQN CLICK SYNC TRA CK ON TAPE The SP-12 can write a Click track to tape (typically one track of a multitrack recorder), to which the SP-12 can later sy nchr onize.
MIXING A ND PROCESSING © E-mu Systems, Inc. 1985 Page 78 Enhanced by The Emulator Archive 2002 www. emulator archive.com PA RT 7: M IXING AND PRO CESSING 7A MIXIN G A ND PR OCESSING: OVERVIEW 7B PSE .
MIXING A ND PROCESSING © E-mu Systems, Inc. 1985 Page 79 Enhanced by The Emulator Archive 2002 www. emulator archive.com 7A MIXING AND PROCESSING: OVERV IEW Sure, the SP- 12 sounds astonishingly realistic.. .but it doesn’t necessarily sound like the drum sounds you hear on records.
MIXING A ND PROCESSING © E-mu Systems, Inc. 1985 Page 80 Enhanced by The Emulator Archive 2002 www. emulator archive.com So far, that’s one channel of ambience. You could add a se cond channel, but another approach is to split the mono ambient signal into two feeds.
A PPENDI X © E-mu Systems, Inc. 1985 Page 81 Enhanced by The Emulator Archive 2002 www. emulator archive.com A PPENDIX A PPENDIX A: THE ART OF SA MPLING APPENDIX B: UNDERST ANDING RHYTHMIC NOTATION A.
A PPENDI X © E-mu Systems, Inc. 1985 Page 82 Enhanced by The Emulator Archive 2002 www. emulator archive.com AP P E N D I X A: TH E ART O F S AM PL I N G Recording good samples is not al ways easy; creating a really super s et of User sounds requires patience, pract ice, and skill.
A PPENDI X © E-mu Systems, Inc. 1985 Page 83 Enhanced by The Emulator Archive 2002 www. emulator archive.com Removi ng the gr ound conn ection defeats t he safety advantag e of using a three-w ire plug. Make sure the SP- 12 chassis - some other path to ground (usually via the audio input and outp ut cable s).
A PPENDI X © E-mu Systems, Inc. 1985 Page 84 Enhanced by The Emulator Archive 2002 www. emulator archive.com A udio “exci ters”: To brighten up a sampled si gnal, use a device such a s an Aphex Aural Exciter or EXR Proj ector.
A PPENDI X © E-mu Systems, Inc. 1985 Page 85 Enhanced by The Emulator Archive 2002 www. emulator archive.com SAMPLING FR OM TAPES Maintaining samp le quality via VCR r ecording: One excellent way to sam ple involves using a VCR and digital audio adapter (sucb as the Sony PCM -F1) for recording different sounds.
A PPENDI X © E-mu Systems, Inc. 1985 Page 86 Enhanced by The Emulator Archive 2002 www. emulator archive.com PART 2: MANIPULATING THE S AMPLE Proper use of tr uncation and looping can conserve memory and create novel eff ects; let’s show how it’s done with an example.
A PPENDI X © E-mu Systems, Inc. 1985 Page 87 Enhanced by The Emulator Archive 2002 www. emulator archive.com.
A PPENDI X © E-mu Systems, Inc. 1985 Page 88 Enhanced by The Emulator Archive 2002 www. emulator archive.com APPENDIX B: UNDERST ANDING RHYTHMIC NOTATION This extremely brief overview is intended solely as a refresher and memory jogger; for a detailed description of rhythm notation, see any good book on music theory.
A PPENDI X © E-mu Systems, Inc. 1985 Page 89 Enhanced by The Emulator Archive 2002 www. emulator archive.com APPENDIX C: UNDERST ANDING TIME SIGNATURES A time signat ure (also called metric sig nature) describes the met er of a piece of music. It consist s of two numbers arranged lik e a fraction, such as 3/4, 4/4, et c.
A PPENDI X © E-mu Systems, Inc. 1985 Page 90 Enhanced by The Emulator Archive 2002 www. emulator archive.com APPENDIX D: UNDERST ANDING MIDI/SMPTE MIDI is causing a certain amount of con fusion among musicians. Fear not -- it’s not all that diff icult to understand, and the SP-12 makes it particularly easy to deal w ith MID I.
A PPENDI X © E-mu Systems, Inc. 1985 Page 91 Enhanced by The Emulator Archive 2002 www. emulator archive.com particular momen t, thus letting you de termine the flow of in f ormati on from one MIDI dev ice to an other.
A PPENDI X © E-mu Systems, Inc. 1985 Page 92 Enhanced by The Emulator Archive 2002 www. emulator archive.com The words of greatest interest to the SP-12 r elate to pitch and tempo.
A PPENDI X © E-mu Systems, Inc. 1985 Page 93 Enhanced by The Emulator Archive 2002 www. emulator archive.com APPENDIX E: TIPS ON CRE A TING REALISTIC DRUM P ARTS If you’re a drumm er, you probably don’t need to read this.
A PPENDI X © E-mu Systems, Inc. 1985 Page 94 Enhanced by The Emulator Archive 2002 www. emulator archive.com A PPENDIX F: TIPS ON USING CA SSETTE INTERFACES Here is a collection of backgr ound information and tips concerning cassette interfaces. Not e that it might tak e you some time to set levels properly and get everything working r ight.
A PPENDI X © E-mu Systems, Inc. 1985 Page 95 Enhanced by The Emulator Archive 2002 www. emulator archive.com I dentify data vocally: Since most small cassette machines have built-in mikes, and other decks have mic input j acks, it’s easy to recor d a brief bit of narration describing the nature of the data saved on the c asset te.
A PPENDI X © E-mu Systems, Inc. 1985 Page 96 Enhanced by The Emulator Archive 2002 www. emulator archive.com A PPENDIX G: HOW THE SP-12 WORKS Here’s a brief idea of how the SP-12 does its magic. The drum sounds were recorded at a studio using real drums and a human drummer.
A PPENDI X © E-mu Systems, Inc. 1985 Page 97 Enhanced by The Emulator Archive 2002 www. emulator archive.com A PPENDIX H: SPECIAL FUNCTIONS (SET-UP #23) NOTE: In t he following feature descriptions the abbreviation “RAM ” (Random Access Memory) means all sounds that are not permanently burned into the factory chips.
A PPENDI X © E-mu Systems, Inc. 1985 Page 98 Enhanced by The Emulator Archive 2002 www. emulator archive.com 17. COPY SOUND This f unction allow s you to move any sound in the SP-12 to any location (Banks 1 - 4.). You should think of the front panel instrument names (Bass 1, Rim, User 6, etc.
A PPENDI X © E-mu Systems, Inc. 1985 Page 99 Enhanced by The Emulator Archive 2002 www. emulator archive.com 18. SWAP SOUNDS Please refer to section 2L of the SP-12 owners manual. 19. DEF AULT DECAY This function applies only to RAM sounds in the TUNE mode (Set-up function # 18 – Decay/Tune Select) that need to be decayed as well.
Ein wichtiger Punkt beim Kauf des Geräts E-Mu SP-12 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie E-Mu SP-12 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für E-Mu SP-12 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von E-Mu SP-12 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über E-Mu SP-12 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon E-Mu SP-12 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von E-Mu SP-12 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit E-Mu SP-12. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei E-Mu SP-12 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
