Benutzeranleitung / Produktwartung XDVD270 des Produzenten Dual
Zur Seite of 24
OWNER ’ S MANUAL Mobile DVD Player with two 7" TFT LCD Monitors XDVD270.
2 XDVD270 PREPARATION Table of Contents 2 3 4-5 6 7 8 9 10 11 12-14 15-17 18 19 20 21 22 DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software products. As this player plays discs according to their intentions, some functions may not work as intended by you.
Please carefully unpack both units, and inspect all contents. The XDVD270 includes the following items: 3 XDVD270 PREPARATION Package Contents Remote Control x 1 Coin Battery x 1 AC Adapter x 1 DC Ada.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1. Read All Instructions - All safety and operating instructions should be read before attempting to operate this product.
1. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
6 12 2 3 4 5 1 Left Speaker Chapter/Track Down Pause Display LCD On/Off Right Speaker IR Sensor 1 2 3 4 5 6 7 Chapter/Track Up Play Stop Power On/Off Open Key Lock On/Off A/V Internal/External 8 9 10 .
Control Locations - External Monitor 7 XDVD270 OPERATION Media Storage Tray Left Speaker Right Speaker Main Unit Connection A/V Internal/External 1 2 3 4 5 Video In Audio In Headphone Out Volume 6 7 8.
8 1 2 4 6 8 10 12 14 16 18 20 21 19 3 5 7 9 11 13 15 17 Power Display Title Zoom Search Slow Audio 4-Way - Up Menu Enter 4-Way - Left 4-Way - Down Cancel 1 2 3 4 5 6 7 8 9 10 11 12 13 Key #2 Key #1 Ke.
1. Connecting the Main Unit to the External Monitor Note: Power off the XDVD270 main unit and any other A/V equipment before connecting the XDVD270 external monitor or making any external Audio or Video connections. Connect the gray end of the supplied communication cable to the right side of the main unit.
Connections - External Audio/Video 10 XDVD270 OPERATION The A/V INT EXT switch selects between internal and external audio/video sources. Select A/V INT on the main unit and A/V INT on the external monitor to watch a DVD playing in the main unit on both monitors.
XDVD270 OPERATION Quick-Start Guide 11 Slide the OPEN button to the right and gently lift the lid. The lid opens to a maximum 90 degrees. Do not open it any further - as severe damage to the unit may occur. Align the center of the disc with the center of the spindle guide.
12 XDVD270 OPERATION General Operation - DVD Setup Menu Using the remote, press SETUP to access DVD setup menu. Press or to select between menu pages and / / / to adjust settings and or levels. When selectable, the menu item will be highlighted in yellow.
13 XDVD270 OPERATION General Operation - DVD Setup Menu Press or to select Audio Setup Page and ENTER to select. Press or to select Speaker Setup Page and ENTER to select. Press or to select LT/RT or Stereo . Press or to select Audio Setup and ENTER to select.
14 XDVD270 OPERATION General Operation - DVD Setup Menu Press or to select Preference Page and ENTER to select. Note: The DVD must be fully stopped before the Preference Page can be accessed. See page 15 for details. Press or to select English, French, German, Spanish, Portuguese, Italian, Danish or Swedish .
15 XDVD270 OPERATION General Operation - DVD Open lid; insert disc making sure it snaps securely on the spindle mount. Close lid. Press POWER on the main unit for more than 2 seconds to turn the unit on. When the unit is on, press POWER for more than 2 seconds to turn the unit off.
XDVD270 OPERATION General Operation - DVD Press I or I from the main unit for more than 2 seconds to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x modes. Press PLAY to cancel fast forward or fast reverse. Press or from the remote control to fast forward or fast reverse in 2x; 4x; 8x; 16x; 32x modes.
17 XDVD270 OPERATION General Operation - DVD Press AUDIO while playing to switch between available languages. Press SUBTITLE while playing to switch between available subtitle languages. Press ANGLE while playing to switch between available viewing angles.
XDVD270 OPERATION General Operation - CD In general, audio discs will play automatically when inserted or the power is turned on. Press STOP momentarily. The unit will return to the start- up logo and display “Press Play Key To Continue”. If PLAY is pressed, the unit will resume operation from the last position in memory.
Close top, making sure that Velcro® closure fits snugly. Loop both belts through buckles. Slip main unit and/or external monitor into either side of the car mount. Place both belts over headrest; position unit so that screen is at comfortable viewing level, then tighten belts.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from def.
21 XDVD270 OPERATION Troubleshooting Problem Action Unit will not turn on (no power) Connect the AC adapter into the wall outlet securely. Connect the DC adapter into the vehicle cigarette outlet securely. Press the POWER button on the main unit for more than 2 seconds.
XDVD270 OPERATION Specifications Signal-to-noise: >94db Dynamic range: >95db Harmonic distortion: <0.008% Frequency response: 10Hz-20kHz Channel separation @1kHz: >68dB D/A converter: 24 Bit Sampling frequencies: 44.1kHz, 48kHz, 96kHz Electronic Shock Protection: 3 seconds (DVD) 20 seconds (CD) Panel size: 7 ” (177.
23 XDVD270 OPERATION Notes Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
www.dualav.com ©2005 Dual Electronics Corp. NSA0805-V01.
Ein wichtiger Punkt beim Kauf des Geräts Dual XDVD270 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dual XDVD270 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dual XDVD270 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dual XDVD270 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dual XDVD270 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dual XDVD270 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dual XDVD270 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dual XDVD270. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dual XDVD270 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
