Benutzeranleitung / Produktwartung Eng. 4358-5936 des Produzenten Dorel
Zur Seite of 22
42 Replacement Parts List NOTE: If requested color is not available, similar color will be substituted. Part Cost Quantity Total Cost Crotch Strap/Buckle $5.99 X ____ = $ ____________ Harness Strap ............ $2.99 X ____ = $ ____________ Seat Pad .
Thank you for choosing this car seat, referred to throughout this manual as a child restraint. The DJG family is committed to creating a child restraint with the most comfort and convenience available today. Remember, parents are a child’s first teachers and examples.
WARNING ! According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. Never place a child less than one-year old forward-facing. Check vehicle instructions for more information about air bag/child restraint use.
This restraint is certified for aircraft use only when used with the internal harness. Do not use as a belt-positioning seat because aircraft seats do not have shoulder belts. Use on forward-facing aircraft seats only and in a position where the lap belt can be tightened securely.
6 Your vehicle’s features may be considerably different than those pictured here. Consult your vehicle owner’s manual to help identify your vehicle’s specific features. Understanding Your Vehicle A B C E 7 D A. Anchor Bracket For Top Anchorage Strap (Forward-Facing Only) B.
8 Child Restraint Parts A. Pillow (on select models) B. Shoulder Belt Guide C. Harness Retainer D. Armrests (on select models) E. Buckle Plates F. Buckle G. Harness Release Lever H. Cup Holder (on select models) I. Harness Adjustment Strap Front G H A B C E I 9 J.
10 Choosing Restraint and Position Your child’s height, weight and age determine how your child restraint should be placed in the vehicle and which restraint should be used.
12 5 Place the child’s bottom and back flat against the child restraint. This will increase comfort and allow the harness to properly tighten. 13 Harness Guide 6 Check Harness Height Forward-Facing Position: Harness guide must be even with or just above the shoulders.
14 Push each buckle plate into buckle until you hear a “click”. Remember to always pull up on harness straps to make sure buckle is locked tightly. 2 4 1 Position harness straps over the child’s shoulders. Securing Your Child in the Child Restraint Pull on harness adjustment strap to tighten harness snugly.
17 Removing Your Child From the Child Restraint Press on release button and pull apart. 2 1 Loosen harness by pushing down on the harness release lever while pulling out on the harness. Press red button on buckle to release the buckle plates. Place harness over sides of child restraint.
18 19 Not all vehicle belts will work with this child restraint. You must determine if your vehicles belts are compatible with this child restraint. If you will use the LATCH system, refer to the LATCH section. ELR - Emergency Locking Retractor Belts Definition: These belts only lock in a sudden stop or crash.
20 21 Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year of age. Forward-Facing Use Lap/Shoulder Belt LATCH Belt Lap Belt WARNING: ! Using this child restraint in any veh.
With knee still in child restraint, attach hook to anchor in vehicle. Push down firmly and tighten top anchorage strap. To adjust top anchorage strap: See “Adjusting Top Anchorage Strap” section. NOTE: If your vehicle does not have an anchor bracket, tuck the top anchorage strap’s hook under the child restraint.
25 Forward-Facing Installation with LATCH Belt: Install LATCH Belts 1 2 4 NOTE: Do not use LATCH system along with the adult lap or lap/ shoulder belt. Route LATCH belt through upper slot in side of shell. Pull one LATCH hook across the back and out the other side.
The top anchorage strap is used for the forward-facing position only. Most vehicles made after 9/1/99 already have the anchor hardware for a top anchorage strap. Refer to your owner’s manual or call your dealer. Storage of Top Anchorage Strap: Belt-Positioning Booster position: Place top anchorage strap and anchor hook under the child restraint.
28 29 Belt-Positioning Booster Use Lap/Shoulder Belt Belt-Positioning Booster Use: 40-80 lbs. (18.1-36.3 kg), 43-52” (110.1-132.1 cm), Over 1 year of age. Refer to the “Choosing Restraint and Position” section to make sure your child is at the proper weight and height to use the belt- positioning booster.
30 31 Belt-Positioning Booster Use: 40-80 lbs. (18.1-36.3 kg), 43-52” (110.1-132.1 cm), Over 1 year of age. 4 5 From bottom of seat, locate buckle’s metal clip. Insert metal clip up through the shell and pad. From the front, pull buckle free from shell and pad.
32 33 Secure the shoulder belt through one of the notches in the shoulder belt guide. The belt should cross the base of the child’s neck and across the chest (not the face or neck). Pull up on the shoulder belt to tighten. Check periodically to ensure your child has not moved out of position and loosened the shoulder belt.
34 35 4 Thread the harness down through slot on left side of shell (1) , across bottom of shell (2) and up through slot on right side (3) . Thread one latch plate onto harness from back to front (4) . Thread the harness retainer (5) . Do the same to the other harness end.
36 37 Remove the 6 harness guides (shown in red) by pushing down on one edge with one hand and pulling out from the front side with the other. 3 Pull pad off shell. Clean with warm sudsy water, rinse clean and air dry. Do not use bleach or other harsh cleaners.
38 3 5 Rebuckle belt. Lap belt portion should now be tight. If not, remove locking clip and repeat all steps. Thread both portions of the vehicle belt onto the locking clip. 39 Position locking clip about 1 in. (2.5 cm) from vehicle belt’s buckle plate.
40 Warranty Dorel Juvenile Group, Inc. (DJG) warrants this product to the original retail purchaser as follows: This product is warranted against defective materials or workmanship for one year from the date of original purchase. An original receipt is required to validate your warranty.
Ein wichtiger Punkt beim Kauf des Geräts Dorel Eng. 4358-5936 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dorel Eng. 4358-5936 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dorel Eng. 4358-5936 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dorel Eng. 4358-5936 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dorel Eng. 4358-5936 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dorel Eng. 4358-5936 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dorel Eng. 4358-5936 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dorel Eng. 4358-5936. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dorel Eng. 4358-5936 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
