Benutzeranleitung / Produktwartung STS75E des Produzenten Dolby Laboratories
Zur Seite of 38
DVD HOME THEATER SYSTEM OWNER'S MANUAL CD -R VCR A V INPUT R 2 VIEWER.
- 1 - Important Safety Instructions W ARNI NG The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.
- 2 - Important Safety Instructions 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 . Retain Instructions - The safety and operating instructions should be retained for future reference.
- 3 - T able of Contents Repeat Playback ........................................ 24 Repeating a title/chapter (DVD) ............................ 24 Repeating a single track/whole disc (CD) ........... 24 Repeating a specific section (DVD) ...........
- 4 - The Unit can playback. Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc.
- 5 - Bef ore Y ou Star t To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the batteries.
- 6 - P arts and Functions (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) Remote Control VO LUM E SE TUP MEN U ENTER SLO W.
- 7 - 1 9 ) FUNCTION button Display the FUNCTION screen where you can check or change various setting. 2 0 ) OPEN / CLOSE button Use to open or close the disc tray. 2 1 ) GOTO button Skip directly to a specific location on a DVD disc. 2 2 ) SOUND button Selects sound balance and tone controls for adjustment with the cursor buttons.
- 8 - Rear Panel 1 ) Disc tray Open or close tray by pushing OPEN/CLOSE button. Place a disc on the disc tray, label side up. 2 ) STANDBY indicator When the Unit is turned on by pressing the STANDBY/ON button, the light will illuminate a few seconds.
- 9 - Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit, "Invalid Region" appears on the TV screen. (The disc cannot be played). If no disc is loaded when the Main Unit is switched on.
- 10 - Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) A. Connecting a TV The Unit can be connected to your TV in several different ways, depending on the design of your TV.
- 11 - Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) or Component video outputs (DVD) Some TVs or monitors are equipped with component video inputs.
- 12 - Setup Notes : • When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connection.
- 13 - Setup (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D . Connecting the speakers & subwoofer The speaker cords have been color-coded to simplify connection.
- 14 - Setup Turning on the Unit and TV 1 )Press the ST ANDBY/ON button to turn the Unit ON, or 2 )Press the ST ANDBY /ON b utton on the remote control or the FUNCTION button or the PLA Y button to turn on the Unit while the Unit is in standby mode. 3 )T urn on the TV by pressing its PO WER button.
- 15 - To adjust the surround sound balance while Dolby Digital and Dolby Pro Logic II decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) • Press the SOUND button repeatedly to display , then press the or CURSOR button to adjust the sound level.
- 16 - Adjusting the Sound Pro Logic Emulation Mode (EMU) The Pro Logic emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content is not of optimum quality, or if there is a desire to hear the program more "as it used to be".
- 17 - (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Pla ying a Disc DV D C D This owner’ s manual explains the basic instructions of this D VD Unit. Some D VD discs are produced in a manner that allo ws specific or limited operation during playbac k.
- 18 - (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Slo w-motion pla y 1.
- 19 - DV D Angle selection Some D VDs contain scenes which hav e been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are pla ying a D VD with different angles recorded, press the ANGLE button to view the number of the current angle.
- 20 - Special Functions DV D DISPLA Y function Using DISPLA Y , you can chec k and change the current settings of the following items: ANGLE, A UDIO and SUBTITLE. • While the disc is playing, press the DISPLA Y button to displa y the screen shown below .
- 21 - Locating a specific title If a D VD disc contains title numbers, you can locate a specific title b y directly selecting a title number . 1. In stop mode, press the GOT O b utton. 2. Press , or button to highlight a specific field and press the corresponding number b utton(s) for the title y ou want.
- 22 - DV D C D Locating a specific time Y ou can mov e to a specific location by entering its corresponding time (hours , minutes, seconds) 1. Press the GOT O button. 2. Press or b utton to highlight time. 3. Press the corresponding number buttons f or the setting point you want.
- 23 - Programmab le memory The two types of prog rammed playbac k provided b y this Unit are title programmed playbac k and chapter programmed pla yback. Title / Chapter programmed pla yback 1. Press the MEMOR Y button while the disc is stopped. 2. Enter the title numbers in - - .
- 24 - Y ou can play a specific title or chapter repeatedly . (Title repeat, chapter repeat, A-B repeat) Repeating a title Y ou can play the same title repeatedly . 1. While the disc is playing, press the REPEA T DISC button until the “ Repeat Title ” indicator displays on the screen.
- 25 - This Unit will play MP3 and Picture files recorded on CD-R discs . Playing a MP3 file disc 1. Press the OPEN /CLOSE b utton, the disc tra y opens. 2. Inser t a MP3 file disc on the disc tra y with the label side up . 3. Press the OPEN/CLOSE b utton, the disc tray closes .
- 26 - Pla ying MP3 and Picture File Disc Playing a Picture file disc 1. Press the OPEN /CLOSE button, the disc tra y opens. 2. Inser t a Picture CD on the disc tra y with the label side up. 3. Press the OPEN/CLOSE b utton, the disc tray closes . 4. The unit will take a short while to load the disc.
- 27 - LANGU A GE setting 1. Press the FUNCTION button until D VD appears on the displa y . 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER b utton.
- 28 - 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be view ed on a conv entional TV screen. • Some wide-screen D VDs that do not per mit P an Scan mode playbac k are automatically played in letterbox mode (black bands top and bottom).
- 29 - Customizing the Function Settings Brightness 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER b utton. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button.
- 30 - A UDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. T o e xit the FUNCTION SETUP MENU and retur n to the nor mal screen, press the RETURN button.
- 31 - (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Subw oofer , and then press the ENTER button.
- 32 - Pink noise 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Pink noise, and then press the ENTER button. 4. Use or button to select the desired setting, and then press the ENTER button.
- 33 - Customizing the Function Settings RA TING setting Password/Parental lock D VD discs equipped with the pass word function are rated according to their content. The contents allowed by a parental lock le vel and the w ay a D VD disc can be controlled may v ar y from disc to disc.
- 34 - Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the F actor y Set, then press the ENTER b utton.
- 35 - Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Code FY GA GB GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO .
- 36 - Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are e xtremely dirty , wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly , then wipe with a dr y cloth.
- 37 - SYMPT OM CA USE (AND REMED Y) • Check that the speak ers and equipment are connected securely . • Make sure that you've selected the correct equipment on the system. • The system is in pause mode or in Slow-motion Pla y mode . Press the PLA Y b utton to return to normal play mode.
Ein wichtiger Punkt beim Kauf des Geräts Dolby Laboratories STS75E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dolby Laboratories STS75E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dolby Laboratories STS75E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dolby Laboratories STS75E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dolby Laboratories STS75E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dolby Laboratories STS75E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dolby Laboratories STS75E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dolby Laboratories STS75E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dolby Laboratories STS75E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
