Benutzeranleitung / Produktwartung 1812 PLUS des Produzenten DKS Enterprises
Zur Seite of 53
Model 1812 Plus Residential Telephone Intercom / Access Control System Owner’s Manual DoorKing, Inc. 120 Glasgow Avenue Inglewood, California 90301 U.S.A. Phone: 310-645-0023 Fax: 310-641-1586 www.doorking.com P/N 1812-161 REV E, 1/10 Copyright 2009 DoorKing, Inc.
Page 2 1812-161-E-1-10.
Use this manual with the following models only . 1812-Plus Residential Tele phone Intercom / Access Control System with circuit board 1971 -0 10. DoorKing, Inc. reserves t he right to make chang es in the products described in thi s manual without notice and without obligation of DoorKing, In c.
Table of Contents Preface Important Notices .............................................................................................................. ........................................6 General Information ..................................
2.4 Devices 2.4.1 Simple Access Code Programming ......................................................................................... 30 2.4.2 Access Code Programming ...............................................................................
Important Notices FCC – United States This equipment has been tested and found to comply with the limits for a cla ss A digital device, pursuant to Part 15 of the FCC Rules and Reg ula tions. These limits are designed to provide reasonable protectio n against harmful interferen ce when the equipment is operated in a commercial environment.
General Information • Prior to beginning the in stallation of the teleph one entry system, we suggest that you become familiar with the instruction s, illustrations, and wiring guidelines in t his manual. This will help insure that you installation is perform ed i n an efficient and professio nal man ner.
Features • Unique telephone commu nication system allows ho meowners to use their tel ephone as an intercom to speak to a guest at a front door or gate, and to control acce ss to their property. • Unique distinctive ring. • Unit connects dire ctly to the homeowners existing telepho ne line.
SECTION 1 - INST ALLA TION Installation of the 1812 Plus Telephone Entry System involves the installation of the hardware and by- pass switch, and the wiring of these components.
1.2 Mount the By-Pass Switch The 1812’s by-pass swit ch provides a method to remove the 1812 from t he telephone line and reconnect the homeo wner’s telephone to the telep hone system. The By -Pass switch IS NOT optional – it must be installed as part of th e 18 12 system.
1.3 Dimensions Surface Mount 1 # 0 * 7 8 9 6 5 4 3 2 10.0 5.25 2.875 6.125 3.0 5.0 2.5 2.5 .875 1.25 1.31 .875 Dia Surface Mount Curved 11.0 6.25 6.75 3.
Flush Mount Rough-in Box 10.25 7.5 4.5 3.5 5.0 2.625 1.25 Dia Flush Mount 123 6 5 4 9 8 7 # 0 * 9.25 12.0 4.25 3.5 .875 Dia 7.25 6.25 10.0 2.5 5.0 Page 12 1812-161-E-1-10.
Wall Mount 10.75 3.5 7.375 1 2 3 6 5 4 9 8 7 # 0 * 2.5 2.5 1.125 1812-161-E-1-10 Page 13.
1.4 Telephone Line Wiring Be sure to observe electrical safety when work ing wit h phon e line s. Phone lines carry electricity and the ring voltage can deliver a substantia l jolt.
TELEPHONE LINE WIRING WIRE SIZE MAX DISTANCE IN FEET 24 AWG 800 22 AWG 1600 20 AWG 2200 18 AWG 3600 1.5 Power Wiring Do not run telephone lines and high voltage lines in the same conduit. Separate high volt age and telephone line conduits by at least six (6) in ches.
1.7 Wiring for a Single Unit – Telephone Mode DOORKING 1875-010 GND ENTRY BY-PASS 12345678 C.O. PH IN PH OUT HOME 16.5 VAC 20 VA Mag Lock Power DOORKING, IN C., INGLEWOOD , CA 903 01 Date: Dwg. No. Rev. Title : 6/09 B M1812P-0 01 1812 Plus – single system.
1.8 Wiring for Multiple Units – Telephone Mode DOORKING 1875-010 GND ENTRY BY-PASS 12345678 C.O. PH IN PH OUT HOME DOORKING, IN C., INGLEWOOD , CA 903 01 Date: Dwg. No. Rev. Title : 6/09 B M1812P-0 02 1812 Plus – multiple system s . Basic wire connections.
1.9 Wiring for Single U nit – Intercom Mode DOORKING, IN C., INGLEWOOD , CA 903 01 Date: Dwg. No. Rev. Title : 2/09 A M1812P-0 03 1812 Plus – single system. Basic wire c onnections intercom m ode . 3 5 A When connected directly to a single telephone or an un- used C.
1.10 Wiring for Multiple Units – Intercom Mode DOORKING, IN C., INGLEWOOD , CA 903 01 Date: Dwg. No. Rev. Title : 2/09 A M1812P-0 04 1812 Plus – multiple system s . Basic wire c onnections intercom m ode . 3 2 A A Connect the PHONE OUT terminals directly to home telephone or an un-used C.
1.11 Main Terminal Description Terminal Description 1 Phone In (Negative) 2 Phone In (Positive) 3 Ground 4 Phone Out (Positive) 5 Phone Out (Negative) 6 Not Used. 7 Switch Input Relay 1. A switch closure ac ross terminals 7 & 9 will activate relay 1 for its programm ed st rike time.
SECTION 2 – PROGRAMMING Before You Start The 1812 has been programmed at the facto ry with m any of the programming parameters alre ady set (default setting) for a typical residential a pplication wit h a single 1812. There is no nee d to re program these parameters unless y ou wa nt to change them.
Programming Guide Table System Parameters Section 2. 2 Description Command Section Default Value Phone / Intercom Mode * 0 6 2.2.1 Phone Single / Multiple Systems * 6 1 2.2.2 Single System Attention Number * 6 2 2.2.3 7 Single or Double Ring * 6 3 2.2.
IMPORTANT! We strongly suggest that you read these programming instructions in their entirety before beginning any programming of this telephone entry system. The DoorKing 1812-Plus Telep hon e Intercom System can be programmed by the followi ng methods.
2.2 System Parameter Progr amming 2.2.1 Phone / Intercom Mode Default setting is 1 (Phone Mode). The 1812 is normally co nnected in series with a re sident’s incoming phone l ine, which supplie s a constant source of DC vo ltage. When the 1812 is con nected in this manner, program the unit for PHONE mode.
2.2.5 Number of Rings to Ring Residence Default setting is 05 (5 Rings) . When the CALL button on the 1812 is push ed, th is programming sequence sets the number of unanswered rings to the house before the 1812 hang s up. 1. Press * 6 4 and then enter the MASTER CODE.
2.2.8 Tone Open Numbers Default setting for Relay 1 is 9876. Default settin g for Relay 2 is 5432. These steps will program the tone open numb er(s) for both relay 1 and relay 2 (each relay is programmed independ ently). You will need to enter a f our-digit number (see chart below) to set each relay.
2.2.10 Hang Up Tone Default setting is 0. These steps set the number that will ha ng-up the 1812 after the conversatio n is completed. The hang up tone is used when a call from the 1812 has been forwarded to an outside number.
2.2.13 Set Call Forwarding Microphone Gain and Speaker Volume Default setting is 71. This adjustment is required only if call forwarding in the 1812 is being use d. This step will adjust the microphone gain (the remo te handset loudness) and the speaker volume (the 1812 loud ness) during call forwarding operation.
2.3 Directory Codes 2.3.1 Directory Codes 24 – 50 Dial Phone Number The 1812 has the capabil ity of operating as an auto-dialer syste m and can store up to 27 phone numbers in its memory. When a visitor enters a di rectory code o n the syst em keypad, the 1812 will call the phone num ber programmed under the specif ic directory code number.
2.4 Devices 2.4.1 Simple Access Code Programming This programming sequen ce programs simpl e access codes into the syst em memory. Simpl e access codes cannot be time zone restricted; they ca n only be assigne d to operate either relay 1 or relay 2 on a 24/7 basis.
2.4.4 Delete All Access Codes This programming sequen ce deletes all access cod es. WARNING: Once started, all access codes will be erased. 1. Press * 7 2 and enter the MASTER CODE. [ * 7 2 _ _ _ _ (beep)] 2. Press 2 *. [ 2 * (beep)] 3. Press 9 9 9 9 then press *.
2.5 Time Functions 2.5.1 Program Calendar Chip This programming sequen ce programs the calendar ch ip in the 18 12 system for the current ti me and date.
2.5.3 Call Forward Phone Number Programming These steps progra m the call forwarding telephone number into the 181 2 memory. Call forwarding can only be used when the 1812 is p ro grammed in p hone mode (see 2.2.1). 1. Press * 1 0 and enter the MASTER CODE.
2.5.5 Relay Hold Schedule Default setting in step 3 is 0 (Hold schedules ar e OFF). This program sequen ce sets up schedules to autom at ically activate and deactivate relays 1 and 2 on the control board. Four schedules can be programmed, ea ch of which ca n be assigned to the desired relay(s).
2.5.6 Time Zones Default setting in step 3 is 0 (Time Zones are OFF). This programming seque nce sets up time zones (up to 4) that can be applie d to the access codes programmed into the 18 12. These time zones can b e turned on or off once they h ave been programmed.
2.6 Miscellaneous 2.6.1 Restore Defaults This step will restore the factory set default s for each of the pr ogramming parameters. WARNING: Once started, this sequence will program all valu es to factory default. 1. Press * 9 0 and enter the MASTER CODE.
SECTION 3 – ADJUSTMENTS Speaker Volume The speaker volume potentiometer is labeled SPEAKER VOL on the cont rol board. The speaker volume should be adjusted for adequat e sound. Adju sting the speaker volum e too loud could cause feedback from the microphone.
Page 38 1812-161-E-1-10.
SECTION 4 – USER INSTRUCTIONS 4.1 Resident Operating Instructions 4.1.1 Granting or Denying a Guest Access To place a call from the 1812 to the re sident’s house, the guest simply presses the PUSH TO CA LL button located on the faceplate.
4.1.3 Dial-Out Phone Numbers To use the dial-out pho ne number feature, the guest simply pre sses a two-digit directory code (24-5 0) on the system keypad. The 1812 w ill automatically dial out t he phone num ber programmed unde r the directory code that was entered on the keypa d (sec tion 2.
4.2 Remote Operation 4.2.1 Remote Programming The 1812 can be programmed and operated from a remote location using a touch-tone telephone. B e sure that the ability for the 1812 to answer an incomin g call ha s not been disable d (see 2.
4.2.3 Relay Activation The 1812 system relays can be activated from th e house. Refer to the to ne open numbers t hat where programmed in section 2.2.8 to determin e each of the activation numbers. • Momentary Activ ation (Relay activates for its programmed strike time) • Hold Open (Relay will activate and remain activated).
SECTION 5 – MAINTENANCE The DoorKing 1812 tel ephone entry sy stem is esse ntially a mai ntenance free device. When the unit is properly installed, it should provide years of trouble free servi c e. Maintenance is limited to updating the access codes and temp orary access codes o n an as needed basis.
5.2 Phone Line Polarity C.O. (Phone Company ) C.O. (Phone Company ) Phone In Phone In Phone Out Phone Out Home Home 8 6 7 3 1 5 4 2 Bypass Switch DC Positive DC Positive DC Positive DC Positive DC Neg.
5.3 Isolating Noise Problems If noise or hum is present on the resident’s pho ne line after installation of the 1812 telephone intercom system, use the pro cedure on the next page to find and correct the source of the noise. This procedure will require the use of a telephone test set (DoorK ing p/n 1800-050 or equi valent).
5.4 Troubleshooting Tables SYMPTOM POSSIBLE SOLUTION(S) Cannot get into programming mode. • Wrong master code entered. Start over. • Waiting too long between pushing bu ttons. Enter information quicker. • Keypad is not plugged into board correctl y.
SYMPTOM POSSIBLE SOLUTION(S) System generates tone when granting access to a visitor, but will not work on regular phone line. • Switch the wires on the PHON IN terminals. System will not answer when called from the resident’s phone. • Using the wrong attention number.
5.5 Wire Diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Mic Vol Master Code 123456789 1 0 1 1 Speaker Vol Keypad 1 2 3 4 5 6 7 8 ON MODEM / TCP ENB SW 1 Red White Green Yell ow Red White White +- Gray Orange Purple White DOORKING, INC., INGLEWOOD, CA 90301 Date: Dwg.
5.6 Accessories Secondary Keypad Allows remote activation of the system relays by use of the access codes. Does not provide a ny voice co m munication to the main unit or to the resident telephone. P/N 1812-082. Surge Suppressers High voltage (115 V) suppresser.
5.7 Tables Complete the information i n the tables on the following p ages to maintain a record of th e information that has been programmed into the 1812 entry system.
Directory Codes / Dial-Out Phone Numbers Directory Code Name Phone Number 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1812-161-E-1-10 Page 51.
Access Code Log Sheet Name Access Code Time Zone Schedule Number Relay Momentary or Hold Page 52 1812-161-E-1-10.
1812-161-E-1-10 Page 53.
Ein wichtiger Punkt beim Kauf des Geräts DKS Enterprises 1812 PLUS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie DKS Enterprises 1812 PLUS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für DKS Enterprises 1812 PLUS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von DKS Enterprises 1812 PLUS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über DKS Enterprises 1812 PLUS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon DKS Enterprises 1812 PLUS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von DKS Enterprises 1812 PLUS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit DKS Enterprises 1812 PLUS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei DKS Enterprises 1812 PLUS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
