Benutzeranleitung / Produktwartung 512 des Produzenten Dish Network
Zur Seite of 135
Page i Content s Safety Instructions ..................................... ..................................... iii Chapter 1 - Introduction ................................................. ................. 1 Welcome! ............... ..............
Content s Page ii Personal Identification Numbers ............... ... ... ... .... ... ... ... .... ... ... ... ....... 81 Using Caller ID ............ ............. ................ ................ ................ .......... 81 Resetting Receiver to Factory Defaul t Settings .
Page iii Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openin gs.
Safety Page iv Safety Tip s • Unplug the receiver from the AC power outlet befor e cleaning. • Always handle the satel lit e receiver carefully . Excessi ve shock and vi bration can damage the hard drive. •D o not place the receiver in an enclosure such as a cabinet without proper ventilation.
Page 1 Chapter 1 Introduction Congratulations on ch oosing DISH Network . Y ou are about to experience the excitement and convenience of Direct Broadcast Satellite (DBS) service, which delivers the very best pictur e and sound quality .
Chapter 1 Page 2 Introduction About this Receiver Y our DISH Network sa te llite receiver has features that make watching TV more exciting. Along with the integrated digital video recording (DVR) functions, you are about to discov er ne w ways to make programming choices.
Page 3 Overview number]-[button name or numb er]-[button name or number]. For Example: Press MENU - 6 - 1 - 3 on your remote control to display the System Information screen. • Connections on the ba ck of the re ceiver are in small capital l etters.
Chapter 1 Page 4 Introduction Getting S t arted After your system has been installe d, order and watch your programming using the following steps: Step 1: Ordering Y our Programming 1. Using a remote control, press SA T and then press the top POWER button to turn on the receiver .
Page 5 Quick T our of Basic Features Step 2: Finding Programs to W atch 1. Press the GUIDE button. 2. When th e Program Guide opens, use the UP or DOWN ARROW to view information on other channels. Press the PAGE UP and PAGE DOWN buttons to move y ou quickly thro ugh the Program Guide .
Chapter 1 Page 6 Introduction information screen opaque (s olid). When you press the INFO button a third time, the information screen is closed. 8. Press the CANCEL button to return to watching the program. 9. Press the BROWSE ( RIGH T ARROW ) button to open the Browse Banner .
Page 7 Quick T our of the Menus Quick T o ur of the Menus This tour guides you quickly through th e basic features available throu gh the Main Menu . See Chapter 3 , Using the System for more information about these and other features.
Chapter 1 Page 8 Introduction 5. Press the MENU button to go back to the Main Menu . 6. Press the 3 button to select the Customer option. This menu provides convenient access to your DISH Network account to review your statement, pay your bill, upgr ade programming, and more.
Page 9 Quick T our of the Menus 9. Press the MENU button to go back to the Main Menu . 10. Press the 5 button to select the Locks op tion on the Main Menu . This menu allows you to apply password-protected locks on programming b ased on rating, or even on a channel- by-channel basis.
Chapter 1 Page 10 Introduction 13. Press MENU to go back to the Main Menu . 14. Press the 7 button to select the Timers option on the Main Menu . This menu is used for creating and changing timers used to trigger automatic channe l changes, reminders, or DVR recordings.
Page 1 1 Quick T our of the Menus 17. Press 3 to open the Favorites menu. This menu allows you to set up lists of your favorite ch annels to make finding what you want to watch easier . 18. Press MENU to go back to the Main Menu . 19. Press the VIEW LIVE TV button to return to watching the program in progress.
Chapter 1 Page 12 Introduction Quick T our of Digit al V ideo Recorder Features DVR features let you have fun with live TV because they put you in co ntrol. Is someone at the door or on the phone? Just press PAUS E on the remote. When you are ready to start watc hing the program again, press PLAY .
Page 13 Quick T our of Digital V ideo Recorder Features 6. Press the PAUSE button and then press the BACK button to reverse the program in slow motio n. Press the BACK button once to reverse the progra m 1/ 4 the speed as normal play . Press the BACK button twice to reverse at normal speed.
Chapter 1 Page 14 Introduction 9. Press the PAUSE button and then press the FWD button to forward the program in slow motio n. When you press th e FWD button once the program advances at 1/15 the speed of normal play . Press the FWD button twice to forward at 1/4 as fast as normal play .
Page 15 Quick T our of Digital V ideo Recorder Features 15. Now , if you want to take the time, use the Pr ogram Guide to find another program set to start in the next few minu tes. Note : Start watching the program when it starts. W atch the program for a few minutes.
Chapter 1 Page 16 Introduction Quick T our of W atching One Progra m While Recording Others The steps below show one of many ways to watch one pr ogram while recording another . 1. Press GUIDE to open the Program Guide . Find a program you want to watch now .
Page 17 Quick T our of Picture-in-Pict ure (PIP) Quick T o ur of Picture-in-Picture (PIP) Y our DISH Network receiver allows you to wat ch two dif ferent programs at the same time using Picture-in-Picture (PIP). 1. Press PIP . The PIP window will op en.
Chapter 1 Page 18 Introduction Satellite T elevision Satellite television uses satellites in a stationary orbit over t he Earth to deliver television and audio p rogramming. This type o f orbit enables the satellites to stay aligned over one place on the surface of the Earth.
Page 19 Chapter 2 Receiver Description and Inst allation Receiver Front Panel Smart Card Door Behind this door is a slot for a future sm art card. No smart card is included with this receiver . Arrow Buttons Y ou can use the ARROW buttons to change satellite ch annels displayed on your TV .
Chapter 2 Page 20 Receiver Description and Installation Receiver Back Panel The receiver connections on the back panel are arranged in three groups: • TV1 Connections - Use these connections with your TV . • TV2 Connections - Do no t try to use these connections with your TV .
Page 21 Remote Controls TV Antenna/Cable In The TV A NTENNA /C ABLE I N is used if you want the satellite receiver to connect the tuner of the nearby TV to an over -the-air antenna or cable-TV distribution system when the satellite receiver is turned off or when using the TV/V IDEO button on the remote co ntrol.
Chapter 2 Page 22 Receiver Description and Installation satellite receiver and as many as three other devic es. These devices can be your TV , a VCR or DVD player , and a third device (an audio system or a second TV). T ypes of Remote Controls Remote Control (IR silver or IR green) uses infrared, line-of-sight signals to control the receiver .
Page 23 Remote Controls Batteries The remote controls come with AAA-size batteries, whic h need to be installed when you first receive your system. When you replace old batteries, you should replace all of the batteries. Use batteries of the same kind, for example alkaline or lithium, and don’t mi x batteries of dif f erent types or kinds.
Chapter 2 Page 24 Receiver Description and Installation Attention : If your optional DISH Network UHF Pro remote control isn’t working very well from far away , you may be experiencing interference from objects near your re ceiver .
Page 25 Connecting the Receiver to Y our Nearby TV 3. Plug in the power cord for the receiver . 4. T urn on the receiver with the front-p anel power button and make sure the green TV1 power indicator is lit. 5. T urn on the nearby TV . 6. T une the TV to channel 3.
Chapter 2 Page 26 Receiver Description and Installation Confirming IR/UHF Pro Re mote Control Operation After any remote TV(s) have been connect ed to the receiver , do the following to make sure an IR/UHF Pro remote can control the receiver from another room: 1.
Page 27 Changing the TV1 Output Channel 3. Press 0-0-0 . 4. Press the POUND ( # ) button. The TV mode b utton flashes three times. Changing the TV1 Output Channel The receiver comes preset to use channel 3 for TV1 coaxial output.
Chapter 2 Page 28 Receiver Description and Installation Note : Y ou may be able to use a wireless modem jack. However , this may not support all the features of this receiver , such as Caller ID. See information on www .dis hnetwork.com for compatible mo de m products.
Page 29 Connecting the Receiver to a Dish Antenna System Connecting the Receiver to a Dish Antenna System Note : Before you can begin connect ing you r receiver to y our d ish antenn a, you must first complete the preceding sec tions on connecting your TVs to the receiver .
Chapter 2 Page 30 Receiver Description and Installation has finished testing yo ur switch, it displays the Installation Summar y screen. 6. Make sure that the information on the Inst allation Summary sc reen identifies your system correctly and sh ows all transponders for all satellites in your system.
Page 31 Optional - Connecting VCRs to the System Optional - Connecting VCRs to the System The diagram below provides examples of how to connect VCRs to your satellite TV system. Y our pa rtic ular installa tion may differ from these examples. Connecting a VCR to the Nearby TV 1.
Chapter 2 Page 32 Receiver Description and Installation TV distribution equipment devices may include coax panels, amplifiers or super home nodes, and are availa ble through many companies.
Page 33 Optimize Y our Remote Controls Att ach a UHF Attenuator (for optional accessory) Stray UHF signals can block signals sent from a remote control to the receiver . Obtain a 10 dB attenuator ( you can b uy on e from a consumer -electronics pa rts store).
Chapter 2 Page 34 Receiver Description and Installation Setting Up TV1 to Operate in UHF Pro Y ou can set your receiver to operate TV1 using an optional IR/UHF Pro remote control (sold separately) by comp leting the following instructions: 1. Perform the following using an existing remote control: a.
Page 35 Setting Up TV1 to Operate in IR (default) Setting Up TV1 to Oper ate in IR (default) The following instructi ons describe how to set up TV1 to operate in IR onl y , which is the default. 1. Perform the following with an existing linked remote control: a.
Chapter 2 Page 36 Receiver Description and Installation.
Page 37 Chapter 3 Using the System Using the T w o Satellite T uners Y our DISH Network satellite receiver incl udes features that gives you greater flexibility in how you watc h TV . These features are enabled by the receiver ’ s use of two satellite TV tuners.
Chapter 3 Page 38 Using the System 3. Press the SWAP button. The channel that was shown in the PIP window will now be shown on the full screen. 4. Press the PIP button again to enlar ge the PIP window . 5. Press the PIP button once more to close the PIP window .
Page 39 Using the Remote Control Power Buttons Press the POWER button to turn your satellite re ceiver ON or OFF . Press the TV POWER button below it to turn your TV on or of f. Note : Y ou must program the remote to contro l your TV for the TV POWER button to work as described.
Chapter 3 Page 40 Using the System TV/Video Button If you connect the receiver using its back panel TV A NTENNA / C ABLE I N and C HANNEL 3-4 connections, use this butto n to switch the receiver C HAN.
Page 41 Using the Remote Control you watch a prog ram, or when you have the Program Guide , Browse Banner , or Themes list open. • Help - Press the INFO button to see help information when a He lp button appears in a menu. View Live TV Button Press the VIEW LIVE TV button to close all menus and go to watching programming.
Chapter 3 Page 42 Using the System • Y ou can use the letters above the NUMBER PAD buttons while within the Search menu. For example, when looking for the channel and event times to watch Rudy Fr em.
Page 43 Using the Menus once and then all four device mode buttons to flash once. 3. If you see the System Info screen, press the SELECT button to close the screen.
Chapter 3 Page 44 Using the System Open and Close Menus Y ou can open the menus in either of two ways: • Press the MENU button to open the Main Menu , then select any of the other menus to open from the Main Menu . • Use the associated buttons on th e remote control, for example: – Open the Program Guide .
Page 45 Using the Menus – Display the Browse Banner on the TV screen. T o c lose a menu and return to watching a program, press either the VIEW LIVE TV or CANCEL button. Note : If you do not do anything in a menu for several minutes, then the menu automatically closes.
Chapter 3 Page 46 Using the System • A single-choice list allows you to select only one choice at a time. If you select another choice, your previous choice is deselec ted for you. • A multiple-choice list allows you to select more than one choice at one time.
Page 47 Using T ext Fields Using T ext Fields There are several sc reens that require yo u to enter information into areas known as fields. Y our receiver has two basi c ways to enter the information: • V irtual Keyboa rd • Remote Control NUMBER P AD Using the Virtual Keyboard Use the virtual keyboard le tters to type the information.
Chapter 3 Page 48 Using the System Changing Channels There are three ways to change channels: • Press the UP or DOWN ARROW buttons. • Use the NUMBER PAD buttons. • Press GUIDE and then select the channel from the Program Guide . See Changing the Channel in the Pr ogram Guide on page 49.
Page 49 Using the Program Guide Changing the Channel in the Pro gram Gu ide 1. Press GUIDE to open the Program Guide . 2. Choose a channel using either of the following: • Use the NUMBER PAD buttons to enter the channe l number . The Program Guide displays a channel block that includes the channel number you just entered.
Chapter 3 Page 50 Using the System Displaying Program Information The Program Banner The Program Banner provides information about the program you are watching. The receiver displays the Program Banner for a few seconds at the top of the scree n ev ery time you change the channel or press the remote control VIEW LIVE TV button.
Page 51 Displaying Program Information Using the Browse Banner 1. Press the BROWSE ( RIGHT ARROW ) button to open the Browse Banner . 2. Change the channel d isplayed on the Browse Banner by doing one of the following: • Enter the channel number for the program or event that you want, using the NUM BER P AD buttons.
Chapter 3 Page 52 Using the System Ordering Pay-Per-View Programs 1. Highlight the desired pay-per -view program in the Program Guide and press the SELECT button. A message like the following displays: 2. T o buy the pay-per-view program or event, select the Ye s option.
Page 53 Using Favorites Lists Creating or Changing a Favorites List Y ou can create, add channels to, and remove channels from a Favorites List . 1. Press MENU-8-2 on your remote control to o pe n Favorites . 2. Select the Favorites Li st that you want to create or change.
Chapter 3 Page 54 Using the System Naming a Favorites List 1. Press MENU-8-2 to open Favorites . 2. Select the Favorites Li st that you want to modify . 3. Select the Edit Name op tion. Note : Y ou cannot change the name of the All Chan or All Sub list.
Page 55 Using Timers recurring), a sports event, a Pay- Per -V iew movie, or anything else that is available on satellite TV . Y ou can set any one of the following: • A one-time event timer with Quick Record . • An automatic event timer for a progra m listed with start and stop times in the Program Guide .
Chapter 3 Page 56 Using the System • Press CANCEL to clear the symbol from the TV screen. This does not affect the timer , which will operate normally .
Page 57 Using Timers – Sto p Recording Manually - The receiver will record until you press ST O P . Note that failing to press ST OP could continue recording and fill the DVR hard drive! – Extend End Time - Y ou can set the stop time for the recording.
Chapter 3 Page 58 Using the System 4. Select a Timer T ype option. See “Event T imer T ypes” on page 55. 5. Select a Timer Fre quency option. See “Event T imer Frequency” on page 55. 6. Select any applicable timer Options. 7. Select a channel by doing one of the following: • Highlight a channel using the UP or DOWN ARROW button.
Page 59 Using Timers • Info - Search for key words in program descr iptions or titles. 4. Optionally , select Exact Match if you want to find exactly what you enter in your selection of either the program Titl e or Info , respectively . 5. Enter your search criteria.
Chapter 3 Page 60 Using the System When the T imer Conflict! screen displays, resolve the conflict by doing the following: 1. Select one of the timers.
Page 61 Using Timers 3. Select the event timer that you want to edit. A mark appears in the box next to the event timer . 4. Select the Edit option. Y ou may change the Timer T ype , T imer Freq uency , or Channel . T o do this, select each option that you want.
Chapter 3 Page 62 Using the System • For All Blacked-Out Programs - If you set a timer for a program or event that is blacked out in your area, when this timer operates the receiver may display only an error or password-entry screen. If you ha ve set an Ext Event Ti me r , the device will record this scr een and not the blacked-out event.
Page 63 Watching One Program While Recording Another 7. Select a program or event that you reco rded earlier (not on e that is recording now), and then select Star t O ve r . 8. Y ou sho uld now be watching a pre-recorded program wh ile your satellite receiver continues recording the other two programs or events.
Chapter 3 Page 64 Using the System Using More DVR Features Y our DVR receiver ’ s fea tures let you decide how to watch TV . Y ou can pause, reverse, or skip back through a program. Then you can return to watching, fast forward, or skip ahead through the program.
Page 65 Using More DVR Features On some TVs, the presence of fi xed images for extended periods of time may cause them to be permanently imprinted on the screen.
Chapter 3 Page 66 Using the System Using Quick Recording T urn the receiver on and tune it to a chan nel with a program you want to record. Note : If you record a locked program or event while you have the receiver locked, then you’ll have to enter the password to play back that recording.
Page 67 Using More DVR Features • If you hide adult ch an nels and lock the receiver , then thi s menu doesn’ t list any programs on adult channels by name. • Y ou can use this menu to review programs or even ts you have recorde d or scheduled to record with the DVR rec eiver ’ s recording features.
Chapter 3 Page 68 Using the System • Press the BACK button once to reverse the program four times as fast as normal pl ayblack speed. Press the BACK button twic e to reverse at 15 times normal speed, three times t o reverse at 60 times normal speed, and four times to reverse at 300 times normal spee d.
Page 69 Using More DVR Features Play Back a Recorded Event and Record Another Event 1. Set up the DVR receiver to ma ke a quick recording. Note : Y ou can press the RECORD button or you can use any kind of event timer except a VCR event timer . 2. Press the DVR button.
Chapter 3 Page 70 Using the System Quick Recording • Quick recording works only when you set it up. • The receiver must have enough room to re cord on your DVR hard drive: – When you make a one-time DVR recording, you can set the rece iver to ask you befor e it records over what you have already recorded.
Page 71 Using Themes and Search Using Themes and Search The Themes and Search feature of your receiver makes it easy to find programs to watch. This me nu allows you to search for programming by themes (movies, sports, etc.) or by key words used within the program’ s information.
Chapter 3 Page 72 Using the System Search 1. Open the Search screen by doing one of the following: • Press the POUND ( # ) button on the remote control. • While watching a program, press the LEFT ARROW button to display the Themes and Se arch menu.
Page 73 Using Themes and Search 5. Select Search . 6. When th e Search Result s are displayed, you have the following options: • Use the UP and DOWN ARROW buttons to scroll through the results. • Use the PAGE UP and PAGE DOWN buttons to scroll a page at a time.
Chapter 3 Page 74 Using the System • Delete - Select one of the items and then select Delete . • Delete All - Select Delete All to clear the Search Hist ory . Using Locks Note : Locks for programming on the TV1 outputs for the nearby TV are set using the receiver ’ s Lo ck menus.
Page 75 Using Locks Note : If you want to unlock the receiver or any specific lock (rating, channel, front panel, or PPV) then use the password. 3. Select the Lock Syst em or Unlock System option. The receiver displays a message prompting you to enter a password to lock the system.
Chapter 3 Page 76 Using the System 4. Select the Ratings Locks op tion. 5. Highlight the lowest rating that you want to block. Press the SELECT button to set a lock at the highlighted rating. Note : All ratings that are more restrictive than the selected rating are also selected.
Page 77 Using Locks 5. Highlight the channel that you wa nt to lock. If necessary , press the UP or DOWN ARROW button to see the channel. Y ou can also jump to a channel by typing the chan nel number using the NUMBER PAD buttons. 6. Press the SELECT button to lock or unlock th e highlighted channel.
Chapter 3 Page 78 Using the System 4. Select the Lock PPV or Unlock PP V option. 5. If the receiver is not lo cked, the you must lock it to put the lock you just created into effect.
Page 79 Using Locks Hiding and Showi ng Adult Channels When you hid e adult chan nels, you keep the Program Guide , Themes lists, and the Browse Banner from displaying adult channe ls. It also keeps anyone from choosing such chann els by using the UP or DOWN ARROW buttons or entering the channel number using the remote control NUMBER PAD buttons.
Chapter 3 Page 80 Using the System 5. Enter the current numeric password using the NUMB ER P AD buttons. As soon as you enter the fourth digit of the password, the receiver highlights the OK option. 6. Press the SELECT button. 7. Enter the new password using the NUMBER PAD buttons.
Page 81 Personal Identification Numbers Personal Identification Numbers Y ou can set up a Personal Identification Nu mber (PIN) for call-in requests only . Anyone calling DISH Network’ s Customer Service Center must provide this PIN to make any changes to your account.
Chapter 3 Page 82 Using the System T urning Caller ID On and Off 1. Press MENU 6-1-2 on the DISH Network remote control. 2. From the Caller ID screen, select either Enable Caller ID (if it is disabled) or the Disable Caller ID option if you wish to disable this feature.
Page 83 Changing Audio Languages for Programs Changing Audio Lang uages for Programs Y ou ma y be able to cha nge the language of some programs ’ audio. An alternate language may not be available for all pr ograms or events. Some programs, such as movies, show at the start whether an alternate language is available.
Chapter 3 Page 84 Using the System Receiver Up dates Y our satellite receiver is set to turn itsel f off at 3:00 a.m. so that it can receive updates to the Program Guide . T o change this upda te time, complete the following: 1. Press the MENU 8-5 to open the Updates screen.
Page 85 Control Other Devices wi th the Remote Contr ol Control Other Devices with the Remote Control This section describes how to use an IR (or optional IR/UHF Pro) remote control to control a TV , a VCR, or other devices . For information on how to use the remote to control the receiver , see Using the Remote Contr ols on page 37.
Chapter 3 Page 86 Using the System Set Up the Remote Control 1. T urn the device on. Use the device’ s front panel buttons or its remote control. 2. Find the brand name of the device in the tables starting on page 109. If the brand isn’t listed, see Scan for Device Codes on page 87.
Page 87 Control Other Devices wi th the Remote Contr ol Scan for Device Codes If the code for your device is not listed in the tables starting on page 109, use this procedure to scan the remote cont rol’ s memory for a working device code. 9. T u rn the device back on and try some other buttons to make sure they work.
Chapter 3 Page 88 Using the System Check the Device Codes Y ou can find out what device code yo u’ve set for each remote- control mode. 6. Press the UP or DOWN ARROW button repeatedly until the device turns of f. As you press the UP or DOWN ARROW button, the remote is trying each code in the memory to see if it can turn of f your device.
Page 89 Control Other Devices wi th the Remote Contr ol Remote Control Buttons Control the Receiver When you get the remote, it’ s already set up to control the receiver . However , you must set up the remote to cont rol the TV before you can use the MUTE and VO L U M E buttons to control TV sound.
Chapter 3 Page 90 Using the System Vo l u m e B u t t o n Press this button to raise (+) or lower (-) the TV sound volume. Up and Down Arrow Buttons Use the UP and DOWN ARROW buttons to change channels on the TV . Note : These buttons do not change the chan nels on the TV if the remote control has been set to operate in limited mode.
Page 91 Control Other Devices wi th the Remote Contr ol Control a VCR (or a Se cond VCR or DVD Player) Only the butto ns described he re control a V CR or DVD play er . Some o f the buttons may not control your specifi c VCR or DVD player . See the user ’ s manual that came with your VCR or DVD player for information about its features.
Chapter 3 Page 92 Using the System Recall Button Press the RECALL button to go back to the last VCR channel you viewed. Press it again to switch between the last two VCR channels yo u viewed. VCR Buttons • Press the BACK button to rewind a videotape.
Page 93 Control Other Devices wi th the Remote Contr ol Control a T uner or Amplifier Only the buttons described here contro l a tuner or audio amplifier . Some of the buttons described here may no t control your tuner or amplifier . Please see the user ’ s manual that came with your tu ner or amplifier for more information.
Chapter 3 Page 94 Using the System amp. Other Remote Control Features Switch Between TV and AU X Device V olume Control When you set up the remote to control a TV , the mute and volume buttons are automatically set to control the TV volu me.
Page 95 T e sting the System 4. Press the 0 number button. 5. Press the POUND ( # ) button. The TV mode button flashes three times. 6. Press the SAT mode button. 7. Press the plus (+) and minus (-) sides of the VOLUME button. The TV’ s volume changes and the TV mode button flashes instead of the AUX mode button.
Chapter 3 Page 96 Using the System Notes.
Page 97 Chapter 4 Reference T roubleshooting T ables Use these tables if you have problems using the system befor e calling the Customer Service Center . Many problems arise from misunderstandings of how the system works, especially when you ar e just becoming familiar with it.
Chapter 4 Page 98 Reference On-Screen Messages This table describes some on-scree n messages in the order of their mes sage numbers . Find the message number in the upper right corner of the message displayed on your TV screen, and then find the matching number in this table.
Page 99 Troubleshooting T ables 013, 014 • You may have tried to tune to a program on a channel which you have not bought. •Y o u must buy a channel be fore you can tune to a program on that channel. Call the Customer Service Center to buy the channel, or if you believe this message was displayed by mistake.
Chapter 4 Page 100 Reference Using the Remote Control 074 • The receiver gives you three chances to ente r the correct password. If you fail to do so, the receiver “times out” and will not allow you to try again for several minutes. • Wait a few minutes and then tr y again to enter the password.
Page 101 Troubleshooting T ables Hearing A Program When you press the remote control Power button to turn the receiver ON, the r eceiver front panel Power light does not light up. • Other lights are too bright. • Remote control not operating properly or the batteries are weak or dead.
Chapter 4 Page 102 Reference Using the Menus W atching A Program What Is Happening Possible Reason What to Do You were using a menu, and it sudd enly closed. The receiver has a time-out feature that closes any menu after several minutes of no activity.
Page 103 Troubleshooting T ables Using the Program Guide or the Browse Banner Using Locks A “black box” fills almost all of the TV screen. • Y ou may have turned on th e Closed Captioned feature on the TV, and put that feature into Text mode.
Chapter 4 Page 104 Reference Changing Channels Using Favorites List s Buying a Pay-Per-View Program What Is Happening Possible Reason What to Do You enter a desired channel number. The channel changes, but the new channel is not exactly the channel you entered.
Page 105 Troubleshooting T ables Using the T elephone for V oice/Data/F AX You find that you are not able to order a pay per view program. • The receiver may not be connected to an active telephone line. • The credit limit may have been exceeded. •Y o u must connect the receiver to an active tel ephone connection at all times.
Chapter 4 Page 106 Reference Using Event Timers What Is Happening Possible Reason What to Do You try to set up an event timer and the receiver displays a message noting that the program is locked. •Y o u must enter the password before you can create an event timer for a locked program.
Page 107 Troubleshooting T ables Using DVR Features What’ s Happening What’s W rong What Y ou Can Do You find you can’t watch part of a program you’ re auto recording. • If the receiver runs out of room to auto record a program, it starts to erase the oldest part of the program to make room for new audio and vide o.
Chapter 4 Page 108 Reference NOTES.
Page 109 TV Codes Programming in AUX mode : Press 0 before entering the TV code. TV Codes Abex 730 Action 662 Admiral 521, 605, 675 Aiko 727 Aiwa 751 Akai 570, 573, 906, 907, 908 A-Mark 620 Amtron 657.
Page 1 10 Reference Chapter 4 VCR Codes Programming in AUX mode : Press 1 before entering the VCR code. MTC 505, 506, 516, 523, 573, 627, 652, 653, 65 4, 680 Multitech 657 NAD 502, 617, 627, 631, 635,.
Page 111 Device Codes American High 678 Amstrad 588 ASA 556 Asha 675 Audio Dynamics 592 Audiovox 676 Beaumark 675 Bell & Howell 581 Broks onic 559 Bush 589 Calix 676 Candle 534, 594, 675, 67 6 Can.
Page 1 12 Reference Chapter 4 TV/VCR Combo Programming for combination d evices : Program the remote control in TV mode and then in VCR mode. DVD Player Codes Programming in AUX mode : Press 1 before entering the DVD code. T uner/Amplifier Codes Programming in AUX mode : Press 2 before entering the tuner/amplifier code.
Page 113 Device Codes TV/DVD Combo Codes Programming for combination d evices : Program the remote control in TV mode using the TV code, and then in VCR mode (or in AUX mode - press 1 before entering the DVD code) using the DVD code.
Page 1 14 Chapter 4 Reference Notes.
Appendix Page 115 Limited W arranty This Limited Warrant y is a legal document. Keep it in a safe place. Remember to retain your Bill of Sale for warranty service! Any items returned without a copy of the Proof of Purchase will be co nsidered out of warranty.
Appendix Page 1 16 If Y ou Need Assist ance 1. Call the Customer Service Center at 1- 800-333-3474. Have the date of purchase and either your customer account number , th e receiver conditional access number , or the rece iver model number ready . Display the Important Sys tem Information me nu to find these numbers.
Page 117 Residential Customer Agreement Page 1 17 For purposes of this Residential Customer Ag reement (the "Agreement") and any cu stomer agreement(s) applicable to the promotion (s) under .
Appendix Page 1 18 Services, we have no obligation to replace or supplement such progra mming, programming packages or other Services. Y ou are not entitled to any refund because of a deletion, rearrangement or cha nge of any programming, programming packages or other Service s.
Page 119 Residential Customer Agreement Page 1 19 In the event billing is provided through a third-party billing agent, the above fees may differ . Service Access Fee $6.00 Y ou do not subscribe to ap plicable required minimu m monthly programm ing. T ransactional Fees T ype of Fee Amou nt Des cription of Whe n Fee Applies Check by Phone Fee $9.
Appendix Page 120 E. Restarting Y our Services. If you do not pay your bill in full by its due date, or you at any time otherwise fail, neglect or refuse to make timely payment for y our Services, we may di sconnect your Services, and in such event we will be wholly relieved from any a nd al l of our duties and obligations under this Agreement.
Page 121 Residential Customer Agreement Page 121 C. Smart Cards. Receiver(s) are e quipped with a conditional access card (" Smart Card") inserted into a slot or otherwise insta lled in such receiver . Not all receivers with a Smart Card slot require a Smar t Card for proper authorization.
Appendix Page 122 B. Return of Leased Equip ment. Upon cancellation or disconnection of y our Services, you mu st contact our custom er service cent er or call the telephone number set forth in any app licable Promotion Ag reement to schedule th e return of your leased Equipment.
Page 123 Residential Customer Agreement Page 123 9. GENERAL A. Notice. Any notice required or permitted to be given by us under this Agreement may be provided via the mail, on your bill, as a bill ins.
Appendix Page 124 S t aying Legal T itle 47, Section 605(e)4, United S tates C ode (U.S.C.) makes it a federal crime to mo dify this receiver to enable it to receive encrypte d (scrambled) television programming without pa yment of required subscrip tions.
Page 125 Compliance Information St atement EchoS t ar T echnologies Corporation, 94 Inverness T errace East, Englewood CO., (303) 706-4000, declares t hat: This device complies with Part 15 of the FCC Rules.
Page 126.
Index Index Page 127 A Arrow Buttons 19 Arrows/Select 19 Attach a UHF Antenna 23 Attach a UHF Attenua tor 33 Auto Recording 64, 69 Automatic Event Timer 57, 63 B Back Panel 20 Channel 3–4 Out 20 Oth.
Index Page 128 H Hiding Adult Channels 79 Highlighting a Choice in a Menu 46 Highlighting Menu Opti ons 45 I Important Information About This Receiver 1 Installation S ummary 30 Installing Batteries 2.
Index Page 129 R Radio Interference 125 RCA Out 20 Receiver Radio Interference 125 Telephone Communication 124 Recording 19 Recover Button 26, 42 Remote Antenna 21 Remote Control Other Features 94 Swi.
Page 130 Index Notes.
176556 Receiver Information Write the following information in the spaces provided below . Y ou ma y need to provide this information if you call the Service Center . T o get the Conditiona l Access Numbers, displ ay the Import ant System Information menu (see Ordering Y our Program Packages on p age 4).
Ein wichtiger Punkt beim Kauf des Geräts Dish Network 512 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dish Network 512 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dish Network 512 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dish Network 512 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dish Network 512 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dish Network 512 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dish Network 512 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dish Network 512. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dish Network 512 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
