Benutzeranleitung / Produktwartung G4203P des Produzenten Directed Electronics
Zur Seite of 20
Responder One Remote Star t Owner's Guide © 2008 Directed Electronics, Vista, CA G4203P 2008-09.
.
Contents Government Regulations ....................................................................................5 W arning! Safety first .........................................................................................7 What is Included ..
4 © 2008 Directed Electronics. All rights reserved. Government Regulations This device complies with Par t 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may.
5 © 2008 Directed Electronics. All rights reserved. W arning! Safety first The following safety warnings must be obser ved at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer .
6 © 2008 Directed Electronics. All rights reserved. After the remote star t module has been installed, contact your authorized dealer to have him or her test the remote star t module by performing the Safety Check outlined in the product installation guide.
7 © 2008 Directed Electronics. All rights reserved. What is Included The control module • T wo 1-button transmitters • (P/N 7211P) A push-button programming switch • Y our warranty card • A shut-down toggle switch • Important Information Congratulations on the purchase of your remote star t keyless entr y sys- tem.
8 © 2008 Directed Electronics. All rights reserved. ➢ Battery Replacement Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Using a small slotted screw- 1.
9 © 2008 Directed Electronics. All rights reserved. Using Y our System ➢ Unlocking Only after the vehicle is remotely star ted via the transmitter , press and release the transmitter button for 1 second to unlock the vehicle’ s doors. The remote responds with 2 shor t beeps and the green LED on the re- mote flashes once.
10 © 2008 Directed Electronics. All rights reserved. Note: In order for the ignition controlled door locks to work, the feature must be turned on in programming. Note: If the ignition is turned on while the vehicle is remote started the doors do not lock until the remote star t shuts of f.
11 © 2008 Directed Electronics. All rights reserved. T o shut of f the remote start: While the vehicle is remote started press and hold the button on the remote for 3 seconds. The remote plays the remote start shut of f tones and the orange LED flashes 1 time.
12 © 2008 Directed Electronics. All rights reserved. ➢ Valet T ake-Over The V alet T ake-Over feature allows the vehicle to remain running after the key has been removed from the ignition.
13 © 2008 Directed Electronics. All rights reserved. Programming options Programming options control your system's normal operational set-up. Most options do not require additional par ts, but some may require installation labor . The following is a list of the programmable options, with the factor y settings in bold .
.
15 © 2008 Directed Electronics. All rights reserved. Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference. ✂ ✂ Quick Reference Guide T o remote star t the vehicle Press and release the transmitter button for 1-second.
.
17 © 2008 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’ .
18 © 2008 Directed Electronics. All rights reserved. WITHOUT LIMIT A TION, LIABILITY FOR THEFT , DAMAGE AND/OR V ANDALISM. THIS W ARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOV AL OR REINST ALLA TION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
.
G4203P 2008-09 Vista, CA 92081 www .directed.com © 2008 Directed Electronics—All rights reser ved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available.
Ein wichtiger Punkt beim Kauf des Geräts Directed Electronics G4203P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Directed Electronics G4203P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Directed Electronics G4203P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Directed Electronics G4203P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Directed Electronics G4203P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Directed Electronics G4203P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Directed Electronics G4203P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Directed Electronics G4203P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Directed Electronics G4203P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
