Benutzeranleitung / Produktwartung Lan Adapter des Produzenten Aironet
Zur Seite of 107
Aironet Wireless Communications, Inc. • 3875 Embassy Parkway Akron, Ohio 44333-8357 www.aironet.com User’ s Guide and T ec hnical Ref erence Man ual Air onet WIreless LAN Adapter Products suppor t.
Air onet Wireless Comm unications, Inc. No par t of this document ma y be reproduced or transmitted in any means , elec- tronic or mechanical, f or any purpose, without the written per mission of Aironet. Inf ormation in this document is subject to change without notice.
i T able of Contents About the User’s Guide and Technical Reference Manual ....................................... vii Typographical Conventions ................................... ix Section 1 Welcome to the Aironet 4000 Series Wireless LAN Adapter .
ii ODI Driver Installation ...................................... 3-11 General Information.......................................... 3-12 Driver Keywords and Settings .......................... 3-14 Section 4 Utilities ................................
iii Edit Parameters ......................................................... B-5 System Parameters ............................................ B-6 Network Parameters ........................................... B-9 RF Network Parameters .............
iv.
iv List of Figures Figure 1.1 - Ad Hoc Wireless LAN ............................... 1-11 Figure 1.2 - Wireless Infrastructure .............................. 1-12 Figure 1.3 - Wireless Infrastructure with Workstations Accessing a Wired LAN ............
v.
v List of T ables Table 3.1 - Driver Disk Structure ................................... 3-2 Table 3.2 - Minimum PROTOCOL.INI Driver Settings .. 3-8 Table 3.3 - Minimum AWCPKT.INI Driver Settings ..... 3-10 Table 3.4 - Minimum NET.CFG Driver Settings .
vi.
About the User’s Guide and Technical Reference Manual vii About the User’ s Guide and T echnical Ref erence Manual This guide cov ers the installation, configuration, control, and maintenance of y our Aironet 4000 Series PC Card Wireless LAN Adapter .
About the User’s Guide and Technical Reference Manual viii Appendix A – Specifications – provides r adio and physical specifications. Appendix B – Using the WinDGS Utility – provides detailed descriptions on using the WinDGS utility .
About the User’s Guide and Technical Reference Manual ix T ypographical Con ventions When reading the User’ s Guide and T echnical Ref erence Manual, it is impor tant to understand the symbol and f or matting conv entions used in the documentation.
About the User’s Guide and Technical Reference Manual x.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-1 Section 1 W elcome to the Air onet 4000 Series Wireless LAN Adapter The Aironet 4000 Series Wireless LAN Adapter is a PC Card radio module t.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-2 Safety Inf ormation The FCC with its action in ET Doc k et 96-8 has adopted a saf ety standard f or human e xposure to radio frequency (RF) electromagnetic energy emitted b y FCC cer tified equip- ment.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-3 Snap-On Antenna Alwa ys or ient antenna such that it is at least 5 cm (2 inches) a wa y from your body . Dipole Antenna Alwa ys or ient antenna such that it is at least 15 cm (6 inches) a wa y from your body .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-4 Other Devices in the Wireless Network Ref er to the User’ s Guide and T echnical Ref erence manual f or the Access P oint, Univ ersal Client, or Br idge f or additional inf or mation.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-5 Radio Characteristics The PC Card operates in the 2.4 GHz license-free Industrial Scientific and Medical (ISM) band. Data is transmitted o v er a half-duple x radio channel operating up to 2 Megabits per second (Mbps) f or the PC4500 or up to 11 Mbps f or the PC4800.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-6 Pr otocols Suppor ted The Aironet 4000 Series Wireless LAN Adapter can be used in a v ar iety of infrastructure configurations. Aironet Access P oints (AP4500 and AP4800) provide connections to Ether net or T ok en Ring Networks.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-7 Here are some operating and en vironmental conditions that need to be considered: • Data Rates. Sensitivity and range are in versely propor- tional to data bit rates . The maximum radio r ange is achie v ed at the low est workab le data rate .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-8 Link T est The link test tool is used to deter mine RF cov erage . The test results help the installer eliminate low RF signal le vel area that can result in loss of connection.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-9 T erminology When configuring your system, and when reading this manual, k eep in mind the f ollowing terminology: Association – Each roo.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-10 P ower Sa ving Protocol (PSP) and Non-P ower Saving Pr otocol – The P ow er Sa ving Protocol allows computers (usually por table computers) to po wer up only par t of the time to conser v e energy .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-11 System Configurations The Aironet 4000 Series Wireless LAN Adapter can be used in a v ar iety of network system configurations.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-12 Figure 1.2 - Wireless Infrastructure In a wireless infrastructure, an Aironet Access P oint is used as a stand-alone root unit. The root unit is not attached to any wired LAN (such as an Ethernet or T ok en Ring LAN), b ut functions as a hub linking all stations together .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-13 Figure 1.3 - Wireless Infrastructure with W orkstations Accessing a Wired LAN A Micro-Cellular Network can be created by placing tw o or more Aironet Access P oints on a LAN. The Aironet roaming protocols allow remote w or kstations to mov e from one microcell domain to another .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-14 Figure 1.4 - Extended Infrastructure Using Repeaters An Aironet Access P oint can be configured as a stand- alone repeater to e xtend the r ange of y our infr astructure, or to ov ercome an RF b loc king obstacle.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-15 Co verage Options The system architecture options of the wireless station and Access P oints provide f or a variety of cov erage alternatives and fle xibility . The system can be designed to provide a wide cov erage area with minimal o v er lap (Figure 1.
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-16 Figure 1.6 - Heavy Overlap Co verage Option By arranging the Access P oints so the ov er lap in co v erage area is nearly maximized, a large number of mobile stations can be suppor ted in the same wireless infrastr ucture .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-17 Figure 1.7 - Multiple Overlapping Systems Co verage Option Multiple systems can operate in the same vicinity . The architecture provides m ultiple channels, which can e xist in the same area with vir tually no interference to each other .
Welcome to the Aironet 4000 Series Wireless LAN Adapter 1-18.
Installing the Hardware 2-1 Section 2 Installing the Har d ware This section describes the procedures for installing the Wireless LAN Adapter . Here’ s what you’ll find in this section: • Bef o.
Installing the Hardware 2-2 Bef ore Y ou Star t F or the PC Card to be used with a computing de vice (desk- top personal computer , notebook, laptop computer , por tab le or hand-held de vice), the de vice must be equipped with an inter nal or e xter nal PC Card T ype II or T ype III slot.
Installing the Hardware 2-3 Figure 2.1 - Overview of the 4000 Series PC Car d Antenna Connector s The PC Card has two f emale MicroMate antenna connec- tors on one end. All antennas and cab les attached to the PC Card must be equipped with male MicroMate connec- tors.
Installing the Hardware 2-4 Standar d Antennas The Snap-On Div ersity antenna comes with the PC4500 and PC4800 and attaches directly to the PC Card. Its small size allo ws mobile communication in a small area (ad hoc network) where a larger antenna would be a wkward or interf ere with the use of the PC or ter minal.
Installing the Hardware 2-5 Attaching the Antenna CA UTION: The Snap-On antenna should nev er be placed in contact with metal surf aces while in use. Attaching the Snap-On Antenna NO TE: Wireless LAN Adapter Card comes with the antenna attached.
Installing the Hardware 2-6 Detaching the Antenna CA UTION: The Snap-On antenna should nev er be placed in contact with metal surf aces while in use. Detaching the Snap-On Antenna 1. Remov e the PC Card from the PC Card slot. 2. Grasp the center of the antenna with the thumb and f orefinger .
Installing the Hardware 2-7 Installing the Wireless LAN Adapter Bef ore you begin, e xamine the PC Card. One end is a dual row 68-pin PC Card connector . This side will be inser ted into the PC Card slot with the Aironet logo on the PC Card and the Snap-On antenna f acing up .
Installing the Hardware 2-8.
Installing the Software 3-1 Section 3 Installing the Software The PC Card is supplied with P A CKET , NDIS2, NDIS3 and ODI drivers allo wing operation under DOS, Windows 3.x, Windows f or W orkgroups, Windo ws 95, Windows 98, Windows NT , and Nov ell Netware .
Installing the Software 3-2 The driver disk shipped with the Wireless LAN Adapter is organized as f ollows: T able 3.1 - Driver Disk Structure README.TXT Contains latest inf or mation about the disk contents DIA G Director y containing utilities FLSH3545.
Installing the Software 3-3 NDIS3 (PC4500) Director y containing NDIS3 driver files PC4500.INF WIN95/98 install file PC4500.SYS NDIS3 driver PC4500.DLL NDIS3 librar y VXD4500.VXD Vir tual device driv er for Aironet WinDGS utility OEMSETUP .INF WIN NT install file ODI Directory containing ODI dr iv er files A WCO45C.
Installing the Software 3-4 Windo ws 95 or Windo ws 98 NDIS3 Installation T o complete the installation of the PC Card under Windows 95 or Windows 98, mak e sure that the PC Card dr iv er is installed and PC Card 32-bit suppor t is enabled.
Installing the Software 3-5 Choosing the adapter from the Network Icon and selecting Proper ties will allow the setting of additional parameters . See Driver K eyw ords and Settings f or inf or mation on these settings.
Installing the Software 3-6 Windo ws NT NDIS3 Installation T o complete the installation of the PC Card using Windows NT , verify PCMCIA card and soc k et ser vices are enab led using De vices in the Control P anel. 1. Shutdown the Windows NT w orkstation.
Installing the Software 3-7 13. Select OK . 14. Select Close . 15. Add all other related network inf or mation if applicab le (IP address, DHCP , DNS , GA TEW A Y).
Installing the Software 3-8 Windo ws f or W orkgr oups NDIS2 Installation 1. P ower on y our computer and star t Windows f or W or kgroups . 2. Go to the Network program g roup and clic k on Netw ork Set-Up . 3. Under Network Setup , choose Networks..
Installing the Software 3-9 DOS NDIS2 Installation The Aironet Wireless LAN Adapter can be installed in a NetBIOS compliant DOS en vironment such as MicroSoft LAN Manager or PC LAN. The installation of this driver includes creating or editing a configuration file (PR O T OCOL.
Installing the Software 3-10 4. Modify the CONFIG.SYS file. After the line containing: De vice=PRO TMAN.DOS, add De vice=[dr iv e:] [path] A WC2N45C .DOS . 5. T o modify the PC Card system par ameters, edit the PR O T OCOL.INI file in the network director y .
Installing the Software 3-11 DOS P ac ket Driver Installation The installation of this driver includes creating or editing a configuration file (A WCPKT .INI). It is required that this file contain the f ollowing lines: T able 3.3 - Minim um A WCPKT .
Installing the Software 3-12 4. If y ou would lik e to modify the PC Card system parame- ters, edit the A WCPKT .INI file. For a list of par ameters which can be modified, see T ab le 3.3. 5. Load the driver b y typing A WCP45C [-cinuw] <int_number> at the DOS prompt (i.
Installing the Software 3-13 ODI Driver Installation The PC Card can be installed in an ODI compliant DOS en vironment such as Nov ell NetW are. T able 3.4 - Minim um NET .CFG Driver Settings 1. P ower on y our computer . 2. Cop y the ODIA WCO45C .COM dr iv er from the Aironet Driver disk ette to the director y containing the networ k files.
Installing the Software 3-14 General Inf ormation • A WCPKT .INI file must ha ve a section header of [A WCPKT]. • PR O T OCOL.INI file can ha v e any section header , but the section must contain the k eyw ord and parameter DRIVERNAME=ìA WC2N45C$î.
Installing the Software 3-15 NO TE: PRO T OCOL.INI does not suppor t some of the white space characters in a quoted string. If a str ing begins with an alphabetic character and contains no special characters , the quotes ma y be omitted. • F or P ack et str ing parameters , the string can be enclosed with doub le quotes or single quotes.
Installing the Software 3-16 Driver K e yw or ds and Settings The def ault PC Card configuration is set to: • Constant A wak e Mode • Infrastructure Mode – This allows association with any Airo.
Installing the Software 3-17 The f ollowing tab les contain k eywords and par ameter set- tings common to both the NDIS2 PR O T OCOL.INI, ODI NET .CFG, and the PKT A WCPKT .INI configur ation files. Basic system operation can be adjusted with the f ollowing parameters .
Installing the Software 3-18 Network perf or mance can be optimized with the f ollowing v ar iables . T able 3.6 - Ad v anced Network K eyw ords Ke ywor ds V alue Description LONGRETR YLIMIT 0 – 255.
Installing the Software 3-19 Additional system perf or mance adjustments can be made with the f ollowing group of v ar iab les. T able 3.7 - Fra gmentation Ke ywor ds Ke ywor ds V alue Description FRA GTHRESHOLD 256 – 2312 (must be e v en) Optional – specifies the fragmenta- tion size in b ytes.
Installing the Software 3-20 The Wireless LAN Adapter pow er management can be adjusted with the f ollowing group of v ar iab les. T able 3.8 - P ower Management Ke ywor ds Ke ywor ds V alue Description PO WERSA VEMODE CAM, PSP , F ASTPSP Optional – specifies a par ticular operational mode (def ault is CAM).
Installing the Software 3-21 T able 3.8 - P ower Management Ke ywor ds (Continued) Ke ywor ds V alue Description F ASTLISTENTIME 0 – 0xFFFF Deter mines how often to a waken f or beacons. Note that the PC Card will alwa ys awak en to receive DTIMs when in F astpsp Mode (default is 100 K µ sec).
Installing the Software 3-22 Additional system perf or mance adjustments can be made with the f ollowing group of v ar iab les. T able 3.9 - Scanning K e yw or ds Ke ywor ds V alue Description SCANMODE A CTIVE, P ASSIVE, AD V ANCED Optional – parameter to determine the current scanning mode to be used by the PC Card (def ault is A CTIVE).
Installing the Software 3-23 Additional system perf or mance adjustments can be made with the f ollowing parameters . T able 3.10 - Infrastructure K e yw or ds Ke ywor ds V alue Description SSID 1 to 32 charac- ter string This parameter must match the SSID of the system f or proper infra- structure operation.
Installing the Software 3-24 T able 3.10 - Infrastructure K e yw or ds (Continued) Ke ywor ds V alue Description SPECIFIED APTO 0 – 0xFFFF Optional – time in K µ sec to attempt to associate to a specified Access P oint before searching f or any a v ail- able Access P oints (with matching SSID) (def ault is 10,000 K µ sec [10 sec]).
Installing the Software 3-25 Ad hoc system operation is accomplished with the f ollo wing group of v ar iab les . T able 3.11 - Ad Hoc K e yw or ds Ke ywor ds V alue Description JOINNETT O 0 – 0xFFF.
Installing the Software 3-26 The f ollowing is a list of k e ywords that will control the host system hardware resources the Aironet 4000 Series Wire- less LAN Adapter requires. NO TE: At a minimum, the PC Card requires 64 consecutiv e 16-bit I/O por ts, one non-sharab le Interr upt and one PC Card type II slot.
Installing the Software 3-27 T able 3.12 - PC Car d Keyw ords Ke ywor ds V alue Description POR TBASE 0 – 0xFFFF Optional – specifies the star ting address f or a bloc k of 64 consecu- tiv e 16-bit I/O por ts. Make sure the bloc k of I/O addresses does not ov er lap the address of another de vice in the machine.
Installing the Software 3-28.
Utilities 4-1 Section 4 Utilities This section describes procedures for using utilities and updating fir mware depending on the oper ating system used. See Appendix B f or detailed configuration procedures f or WinDGS using Windows 95 or Windows 98.
Utilities 4-2 The link test tool helps deter mine the RF network cov erage . The results of the link test will help eliminate low RF signal le v el areas that can result in loss of connection between the PC Card and the Aironet Access P oint. It is impor tant to remember the information being displa y ed is from the Aironet Access P oint viewpoint.
Utilities 4-3 8. Star t a telnet session on the mobile station to the Aironet Access P oint. Depending on the system in use, the telnet application ma y hav e logging and note taking capability . If so , enable these modes . 9. Na vigate through the Aironet Access P oint menu to the link test option.
Utilities 4-4 Using Windows 95 or Windo ws 98 to Perf orm a Link T est Y ou ma y use either : • T elnet • The link test or site sur v e y commands in WinDGS • Linkscope.
Utilities 4-5 Link T est Command in WinDGS WinDGS ma y be used to assess the perf or mance of RF links. TCP/IP protocol must be installed to run this link test. See the Help section of Windows 95/98/NT f or more inf or- mation on installing and setting up TCP/IP .
Utilities 4-6 2. Once the parameters ha ve been entered, clic k on the Star t button at the bottom of the dialog bo x to star t the link test. When the link test is running, nec- essar y statistics will be displa yed and updated peri- odically . 3. T o stop the link test, clic k on Stop , OK, or Cancel at the bottom of the dialog bo x.
Utilities 4-7 Signal strength is displa yed along the v er tical axis of the gr aphical displa y . Signal quality is display ed along the horizontal axis. The combined result is represented b y a diagonal line. The Aironet Access P oint associat- ing with the PC Card is indicated along the bottom of the displa y as well as its MA C address.
Utilities 4-8 Loading Ne w Firmware V er sions The fir mware is contained in the card’ s flash memor y . Flash memor y allows f or easy updating of the fir mware as neces- sar y . Upgrading Firmware f or Windows 95 or Windo ws 98 The WinDGS progr am is used to load ne w fir mware .
Utilities 4-9 Loading Firmware f or Windows 3.11 and DOS The FLSH3545.COM progr am is used to load new fir mw are to systems operating under DOS and Windows 3.11. T o load ne w fir mware: 1. Bef ore upgrading the firmware, uninstall the driv er or reboot the computer and do not load the driver during the boot process.
Utilities 4-10.
Error Messages and Trouble Shooting 5-1 Section 5 Err or Messages and T r ouble Shooting The Wireless LAN Adapter provides LED messages and error codes. This section provides the gener al procedures f or correcting common problems encountered when installing the PC Card system.
Error Messages and Trouble Shooting 5-2 T able 5.1 – Green LED Operating Messa ges T able 5.2 – Amber LED Operating Messa ges Green LED Condition Off No pow er or error Flashing Quickly P ow er on.
Error Messages and Trouble Shooting 5-3 If Y our Radio Fails to Estab lish Contact • Change y our location or the location of the antenna b y a f ew f eet and tr y again. • Mak e sure the antenna is securely attached. • Mak e sure the PC Card is securely inser ted in the PC Card slot.
Error Messages and Trouble Shooting 5-4.
PC Card Specifications A-1 Appendix A PC Car d Specifications LAN Driver s Suppor ted T able A.1 – Supported Drivers Pr otocol Operating System ODI DOS based driver f or Novell Netw are NDIS 2 MS DOS, Windows 3.xx NDIS 3 Windows 95, Windows 98, Windows NT P acket MS DOS, Windows 3.
PC Card Specifications A-2 Radio Specifications T able A.2 – Radio Specifications Item Specification Description Radio T ype Direct Sequence 2.4 GHz ISM Band Operating F requency 2400-2497 Nor th.
PC Card Specifications A-3 P o wer Requirements T able A.3 – P ower Requirements Ph ysical Specifications T able A.4 – Ph ysical Characteristics Specification V alue Operational V oltage 5.
PC Card Specifications A-4 Mechanical Description Figure A.1 – Mechanical Outline RF CONN. (2) .196 LED LOC'N (2) J1 and J2 provided for diversity antenna connections. If a special single-coax diversity antenna is required, use J1 exclusively. .
Using the WinDGS Utility B-1 Appendix B Using the WinDGS Utility WinDGS is used to perf or m user le v el diagnostics on your Aironet Wireless LAN Adapter Card in the Windows 95 or Windows NT oper ating system environment.
Commands Menu B-2 Load Ne w Firmware See Section 4 – Utilities f or more inf or mation on loading and upgr ading fir mware v ersions. Edit Pr oper ties WinDGS allows y ou to change the configuration parameters of y our currently installed Aironet 4000 Series Wireless LAN Adapter.
Commands Menu B-3 Link T est See Section 4 – Utilities f or inf or mation on using link test. Site Survey See Section 4 – Utilities f or inf or mation on using site sur v e y . Radio Off/On Radio Off/On allows y ou to selectiv ely tur n off or on the pow er to the radio .
Commands Menu B-4 Options Men u The Options Menu includes: • Pref erences • Screen Update Timer • Sa v e Proper ties Options Preferences The WinDGS Pref erences allow y ou to customiz e v ar ious parameters that control the oper ation of WinDGS .
Edit Parameters B-5 Sa ve Pr oper ties Options Use Sa v e Proper ties Options to select the def ault opera- tions f or saving the current adapter configur ation. Choose either : • Save Pr oper ties to the Registry : This option allows y ou to sa v e the configuration to the Windows Registr y .
Edit Parameters B-6 System P arameter s System parameters include: • Name • SSID • Network T ype (Infrastructure or Ad Hoc) • Constant A wak e Mode (CAM) • P ower Sa ve Mode • F ast P ow er Sa v e Mode • Maximum P ow er Sa ve Mode Name The station name is displa yed in the tab le of connected de vices on the Access P oint.
Edit Parameters B-7 Netw ork type (Ad Hoc Mode) This mode is used to set up a small, temporar y network between tw o or more computers. F or example , you might set up an ad hoc network between computers in a conf erence room so users can share inf or mation in a meeting.
Edit Parameters B-8 Maxim um P ower Sa ve Mode Maximum P ow er Sav e Mode (Max PSP Mode) can only be used in conjunction with PS or F ast PSP Modes .This mode allows the Aironet 4000 Series Wireless LAN Adapter to conser v e the most pow er while still main- taining an infrastructure connection.
Edit Parameters B-9 Netw ork P arameters User modifiab le parameters are limited to the choice of MA C Address: • F actory MA C Address : This is the def ault MA C address which is guaranteed to be unique .
Edit Parameters B-10 • Data Retries : This parameter defines the n umber of times a pac k et will be re-sent if the initial transmission is unsuccessful.
Edit Parameters B-11 Ad v anced (Infrastructure) The f ollowing parameters are contained in both the Infr a- structure and Ad Hoc Modes: • Antenna Mode • Specified Access P oint • R TS Threshol.
Edit Parameters B-12 • Left Antenna Only (J2) : Choose this option if the antenna y ou are using is connected to the left hand antenna por t and you are not using the standard Snap-On antenna. This tells the PC Card not to attempt to communicate using the right hand antenna por t since no antenna is connected to it.
Edit Parameters B-13 R TS Retry Limit This parameter controls the n umber of times the PC Card will re-send the R TS pac ket if it does not receiv e a CTS from the pre viously sent R TS pac k et.
Edit Parameters B-14 Beacon P eriod This parameter specifies the dur ation between beacon pac k ets that are used b y IEEE 802.11 systems to synchronize the “hops” (change to another frequency). The beacon pac k et contains timing inf or mation and hop patter n inf or mation that is broadcast ov er the airwa v es.
Appendix C C-1 T ested T o Comply With FCC Standards FOR HOME OR OFFICE USE Appendix C Manufacturer s Federal Communication Commission Dec laration of Conf ormity Statement Models: PC4500, PC4800 Manufacturer: Aironet Wireless Communications, Inc. 3875 Embassy P arkwa y Akron, OH 44333-8357 330-664-7900 This de vice complies with P ar t 15 r ules.
Appendix C C-2 Depar tment of Comm unications—Canada Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interf erence - Causing Equipment Regulations . Cet appareil numerique de la classe B respecte les e xigences du Reglement sur le material broilleur du Canada.
Appendix C C-3 Eur opean T elecommunication Standar ds Institute Statement of Compliance Inf ormation to User This equipment has been tested and f ound to comply with the European T elecommunications Standard ETS 300.328. This standard cov ers Wideband Data T ransmission Systems referred in CEPT recommendation T/R 10.
Appendix C C-4 Declaration of Conformity Aironet Model Number: PC4500 Radio CE T ype Certificate Number: Radio T ype Approval Examiniation Number: BCL/EC/98-0309/B CPC/ARLAN/DK/9815 Application of Cou.
Appendix C C-5 Declaration of Conformity Aironet Model Number: PC4800 Radio CE T ype Certificate Number: Radio T ype Approval Examiniation Number: Application of Council Directive: Application of Coun.
Appendix C C-6.
Appendix D D-1 Appendix D T ec hnical Suppor t Comm unications Use the f ollowing inf or mation to contact the Aironet T echnical Suppor t group: T elephone - (330) 664-7903 F ax - (330) 664-7990 e-mail - techsupp@aironet.
Ein wichtiger Punkt beim Kauf des Geräts Aironet Lan Adapter (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aironet Lan Adapter noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aironet Lan Adapter - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aironet Lan Adapter reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aironet Lan Adapter erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aironet Lan Adapter besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aironet Lan Adapter verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aironet Lan Adapter. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aironet Lan Adapter gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
