Benutzeranleitung / Produktwartung Contractor Series des Produzenten DeVillbiss Air Power Company
Zur Seite of 24
Nailer/Stapler Operation Manual MG-NS2X4A 7/16/99 This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. PLEASE READ THIS MANUAL. DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 Specifications MODEL NO.
PAGE 2 Page Tool Specifications ................................................................ Front Cover Table of Contents ................................................................................... 2 Limited Warranty .....................
PAGE 3 All merchandise manufactured by DeVilbiss Air Power Company/ExCell Manufacturing is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user).
PAGE 4 HAZARD TO LOOK FOR Compressed Gas Excessive Operating Pressure Unsuitable Cleaning Solvents WHAT COULD HAPPEN Oxygen will react with oil in tool caus- ing an explosion. Flammable gases will ignite from sparking and cause the tool to explode, resulting in serious injury or death.
PAGE 5 Risk of head injury. WHAT COULD HAPPEN Metal fragments, fasteners, or other material could be projected against head or into eyes resulting in serious injury or property damage. Contin- ued exposure to an operating tool can result in permanent hearing dam- age.
PAGE 6 Risk from flying objects. WHAT COULD HAPPEN Fasteners could ricochet or be propelled causing serious injury or property damage. When working along edges or next to voids in work surface, the co.
PAGE 7 Do not store the tool in cold weather. Frost or ice can form on the operating valves or mechanisms and the tool may not operate correctly. In cold weather operation (near or below freezing), DO NOT USE a permanent antifreeze such as ethylene glycol for a cold weather lubricant.
PAGE 8 Always connect the Female Quick Cou- pler to the air hose. Never connect the Female Quick Coupler to the tool. Never carry the tool by the hose or pull the hose to move the tool or a com- pressor. Keep hoses away from heat, oil, and sharp edges.
PAGE 9 NAILER FEMALE QUICK COUPLER MALE QUICK CONNECTOR OILER FILTER RECOMMENDED HOOK-UP The following illustration shows the proper hook-up which will help prolong the life of the Tool.
PAGE 10 OPERATING A CONTACT TRIP TOOL: 1. Requires finger to be off the trigger and the nose of the Tool to be placed on the work surface. 2. The contact trip safety mechanism is then depressed against the work surface and the trigger pulled to drive a fastener.
PAGE 11 Handle the tool carefully. Respect the tool as a working implement and always as- sume the tool contains fasteners: a. Never use the tool as a toy and engage in horseplay. b. Never aim or point the tool at any- one. The tool may contain fasteners.
PAGE 12 4. Push release button (if equipped) and slide feeder shoe forward. Protect your eyes and ears. Wear Z87 safety glasses with side shields. Wear hearing protection. Employers and users are responsible for ensuring the user or anyone near the tool uses the prescribed safety equipment.
PAGE 13 Disconnect tool from air compressor before adjusting, clearing jams, servicing, relocating and during non-operation. FASTENER JAMMED IN FASTENER DISCHARGE AREA: 1. Disconnect tool from air hose. 2. NF2502X4, NB1252X4, NB2002X4, NBSNC2X4 Release the magazine latch to open the magazine.
PAGE 14 FASTENER JAM INSIDE MAGAZINE : 1. Disconnect tool from air hose. 2. NF2502X4, NB1252X4, NB2002X4, NBSNC2X4 Release the magazine latch to open the magazine. Feeder Magazine Latch SNC1002x4 Pull feeder shoe back into "locked" position.
PAGE 15 PROBLEM Air leaking at trigger valve area. Air leaking through the exhaust deflector. Tool fails to drive fastener. Tool runs slow or has loss of power. SOLUTION Seals must be replaced & operation of Contact trip must be checked. On the NBSNC2x4 contact *AWSC for correct part.
PAGE 16 SOLUTION Replace feed pawl. Contact an *AWSC Replace feed pawl spring. Fasteners recommended for tool must be used. Replace with undamaged fasteners. Set platform to correct height. Adjust air pressur e to the correct PSI for that particular model nailer/stapler .
PAGE 17 NF2502X4 1/4" NPT INLET PLUG (AC100) FINISH NAIL FASTENERS 6 & 7MM COMBINATION CRESCENT WRENCH 3 4 5mm ALLEN WRENCHES FINISH NAILER LUBRICATING OIL SAFETY GLASSES 1 1 / 2 ” 1 ” 1 .
PAGE 18 SNC1002X4 NARROW CROWN STAPLE FASTENER 1/4" NPT INLET PLUG (AC100) LUBRICATING OIL NARROW CROWN STAPLER 3 & 4 ALLEN WRENCHES SAFETY GLASSES Tool 2X4 Part Number Description Qty per Bo.
PAGE 19 NB2002X4 LUBRICATING OIL 1/4" NPT INLET Plug (AC100) BRAD NAILER BRAD NAIL FASTENERS 4 3 ALLEN WRENCHES 5/8" SAFETY GLASSES Tool 2X4 Part Number Description Qty per Box Steel Driver .
PAGE 20 NB1252X4 LUBRICATING OIL 1/4" NPT INLET PLUG (AC100) BRAD NAIL FASTENERS BRAD NAILER 4MM 3MM ALLEN WRENCHES SAFETY GLASSES Tool 2X4 Part Number Description Qty per Box Steel Driver Series.
PAGE 21 NBSNC2X4 2X4 SIGNATURE SAFETY GLASSES LUBRICATING OIL 4MM 3MM ALLEN WRENCHES COMBINATION BRAD NAILER/ NARROW CROWN STAPLER NARROW CROWN STAPLE & BRAD NAIL FASTENERS 1/2" 3/4" 1&q.
PAGE 22 REP AIR KITS A V AILABLE K-0521 T op Repair Kit K-0522 Bottom Repair Kit NF2502X4 K-1664 Driver Blade Kit K-0523 T rigger Repair Kit SNC1002X4 and NB1252X4 K-0525 T op Repair Kit K-0526 Bottom.
PAGE 23 REP AIR KITS A V AILABLE K-0517 T op Repair Kit K-0518 Bottom Repair Kit NB2002X4 K-1850 Driver Blade Kit K-0519 T rigger Repair Kit NBSNC2X4 B340-06 T op Repair Kit B232-23 Bottom Repair Kit .
Nailer/Stapler Operation Manual Call our T oll Free Number 1-800-888-2468, Ext 2, then 1, to obtain the location of the nearest Authorized Service Center for ordering r epair parts and for warranty repairs.
Ein wichtiger Punkt beim Kauf des Geräts DeVillbiss Air Power Company Contractor Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie DeVillbiss Air Power Company Contractor Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für DeVillbiss Air Power Company Contractor Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von DeVillbiss Air Power Company Contractor Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über DeVillbiss Air Power Company Contractor Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon DeVillbiss Air Power Company Contractor Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von DeVillbiss Air Power Company Contractor Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit DeVillbiss Air Power Company Contractor Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei DeVillbiss Air Power Company Contractor Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
