Benutzeranleitung / Produktwartung DOP-A/AE/AS des Produzenten Delta Electronics
Zur Seite of 137
20080122 Series HMI Connection Manual Series HMI Connection Manual ASIA AMERICA EUROPE Delta Electronics, Inc. T aoyuan1 31-1, Xingbang Road, Guishan Industrial Zone, T aoyuan County 33370, T aiwan, R.O.C. TEL: 886-3-362-6301 / F AX: 886-3-362-7267 Delta Electronics (Jiang Su) Ltd.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-1 1.1 Pin Definition of Serial Communication DOP-A Series COM1 Mode PIN RS-232 1 N.C 2 RXD 3 TXD 4 N.C 5 GND 6 N.C 7 RTS 8 CTS 9 N.C COM2 Mode 1 Mode 2 Mode 3 PIN RS-232 RS-422 RS-485 1 N.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-2 Revision January, 2008, Doc. Name: 2007PDD23000007 DOP-AE Series COM1 Mode PIN RS-232 1 N.C 2 RXD 3 TXD 4 N.C 5 GND 6 N.C 7 RTS 8 CTS 9 N.C COM2/COM3 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 PIN RS-232 RS-422 RS-485 RS-232 x2 RS-422 x2 RS-485 x2 1 N.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-3 DOP AS Series COM1/COM3 Mode 1 Mode 2 PIN RS-232 RS-232 x2 1 N.C N.C 2 RXD RXD 3 TXD TXD 4 N.C N.C COM 1 5 GND GND 6 N.C N.C 7 RTS TXD 8 CTS RXD COM 3 9 N.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-4 Revision January, 2008, Doc. Name: 2007PDD23000007 1.2 Cable for Download Download via COM Port RS-232 DOP series HMI 9 pin D-SUB m.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-5 1.3 Supported Controllers and Devices Please refer to the following table for su pported co ntrollers and devices provided by DOP series HMI.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-6 Revision January, 2008, Doc. Name: 2007PDD23000007 Brand Controller Name / Series Name FX / FX2N FX3U A Series/J71UC24 Mitsubishi A2A/A.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-7 Delta (Servo/AC Drive/PLC/Temperature) Controller Back to Table A. HMI factory setting Baud rate: ASCII: 9600, 7, None, 2. RTU: 9600, 8.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-8 Revision January, 2008, Doc. Name: 2007PDD23000007 Read/Wri te Range Register Type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-9 2) PLC Word Device X and Y are in octal format. Other PLC Word Device M, S, T, C, D and HC are in decimal format. 3) Servo Digital Input and Servo Di gital Output are only for Servo.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-10 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinouts ) Delt a Servo RS-232 DOP Series 9 pin D-SUB male.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-11 Delt a AC dri ve RS-485 DOP Series 9 pin D-SUB male (RS-485) Controller RJ-11 cable.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-12 Revision January, 2008, Doc. Name: 2007PDD23000007 Delta DVP PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, Even, 1. Controller station number: 1. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-13 C. Connections (Connector Pinout s) RS-232 Connection DOP Series 9 pin D-SUB male (.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-14 Revision January, 2008, Doc. Name: 2007PDD23000007 AllenBradley MicroLogix PLC Back to Table A. HMI factory setting Baud rate: 19200, 8, None, 1. PLC station number: 1. Control area/status area: B3:0/B3:10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-15 Cont acts Read/Wri te Range Bit No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-16 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 Connection DOP Series 9 pin D-SUB male (.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-17 AllenBradley SLC5 PLC Back to Table A. HMI factory setting Baud rate: 19200, 8, None, 1. PLC station number: 1. Control area/status area: B3:0/B3:10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-18 Revision January, 2008, Doc. Name: 2007PDD23000007 Read/Wri te Range Word No. Bit No. Low Byte High Byte Register Type Format Element No. Slot or File No. Counter Accum ulator Value Cf:n.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-19 Read/Wri te Range Word No. Bit No. Low Byte High Byte Contact Type Format Element No. Bits Slot or File No. Timer Accumul ator Value Tf:n.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-20 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP series 9 pin D-SUB male (RS-232) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-21 Cimon PLC (Loader Protocol) Back to Table A. HMI factory setting Baud rate: 38400, 8, None, 1, RS-232. PLC station number: 1. Control area/status area: D00000 / D0 0010.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-22 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP series 9 pin D-SUB male (RS-232) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-23 Copley Servo (Stepnet Protoc ol) Back to Table A. HMI factory setting Baud rate: 9600, 8, None, 1. PLC station number: 0. Control area/status area: None.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-24 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP series 9 pin D-SUB male (RS-232) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-25 Danfoss VLT 2800 (FC Protocol ) Back to Table A. HMI factory setting Baud rate: 9600, 8, Even, 1, RS-485. PLC station number: 1. Control area/status area: None / None.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-26 Revision January, 2008, Doc. Name: 2007PDD23000007 Cont acts Read/Wri te Range Word No. Bit No. Low Byte High Byte Contact Type Format Element No. Bits Index No. Parameter Pn:I.b n: 0 ~ 999 b: 0 ~ 31 I: 0 ~ 31 ¾ Bit No : Low byte stores Bit address.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-27 St a t u s Wo r d Bit Bit = 0 Bit = 1 15 Timer OK Above limit 14 Torque OK Above li.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-28 Revision January, 2008, Doc. Name: 2007PDD23000007 Emerson EC20 Series PLC Back to Table A. HMI factory setting Baud rate: 19200, 8, Even, 1 (RS-232). PLC station number: 0. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-29 3) Please note that not all of the addresses c an be written when reading SM and SD device. We recommend the user not to set all of the addresses as write addre ss except when setting parameters.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-30 Revision January, 2008, Doc. Name: 2007PDD23000007 Facon FB Series PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, Even, 1. Controller Station number: 1. Control area/status area: R0 / R10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-31 C. Connections (Connector Pinout s) RS-232 DOP Series 9 pin D-SUB male (RS-232) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-32 Revision January, 2008, Doc. Name: 2007PDD23000007 Festo PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, None, 1. Controller Station number: 0. (no PLC station number in protocol) Control area/status area: R0 / R10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-33 C. Connections NOTE 1) Communication port of PL C: COM port 2) It needs to use the dedicated cable for FESTO controll ers Æ Cable for transferring TTL to RS-232 and it is 6 pin RJ-12 connector at PLC side.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-34 Revision January, 2008, Doc. Name: 2007PDD23000007 GE Fanuc 90 Series SNP PLC Back to Table A. HMI factory settings Baud rate: 19200, 8, ODD, 1. Controller Station number: 0. (no PLC station number in proto col, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-35 Cont acts Read/Wri te range Contact Type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-36 Revision January, 2008, Doc. Name: 2007PDD23000007 Hitachi EH Series PLC Back to Table A. HMI factory settings Baud rate: 19200, 7, EVEN, 1. Controller station number: 0. Control area/status area: WR0 / WR10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-37 NOTE 1) Communication Settings: y In Hitachi EH series PLC, only port 1 can be us ed for communication through procedure 2. Th e user can select pro cedure type via DIP switch and specific Special Internal Input (WR).
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-38 Revision January, 2008, Doc. Name: 2007PDD23000007 slot 0: X48 slot 1: Y32 slot 2: empty16 Analog Type slot 3: X4W slot 4: Y4W 3) Communication Protocol: External I/O (X, Y, WX, WY) y Address rules:[r][u][s][n/b].
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-39 HUST CNC Controller Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 2. Controller station number: 0. Control area/status area: W0 / W10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-40 Revision January, 2008, Doc. Name: 2007PDD23000007 Jetter Nano Series PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, EVEN, 1 (RS-232). Controller station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-41 if the read/write address format is set to Rn , only Bit 0 ~ 23 are valid for Rn registers. (Notice: As the Jetter controller is a 24-bit form at controller, the valid setting range is 24 Bits.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-42 Revision January, 2008, Doc. Name: 2007PDD23000007 Jetter JC Series PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, EVEN, 1 (RS-232). Controller station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-43 C. Connections (Connector Pinout s) RS-232 DOP Series 9 pin D-SUB male (RS-232) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-44 Revision January, 2008, Doc. Name: 2007PDD23000007 Keyence KV/KZ Series Back to Table A. HMI factory settings Baud rate: 9600, 8, EVEN, 1 (RS-232). Controller station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-45 NOTE When using the protocol format of KV series and conn ec ting to KZ-80T PLC, some errors occur. Please refer to the following description: 1) Readable Timer address is not continu ous.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-46 Revision January, 2008, Doc. Name: 2007PDD23000007 NOTE 1) Communication Cable: The pins of SD and RD of KZ-80T and KV Series are reverse.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-47 Koyo SU/DL Series Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1 (RS-232). Controller station number: 1. Control area/status area: V1400 / V1410.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-48 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-49 Koyo K-Seq uence Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1 (RS-232). Controller station number: 1. Control area/status area: R1400 / R14 20.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-50 Revision January, 2008, Doc. Name: 2007PDD23000007 Read/Wri te Range Contact type Format Word No. Bit No. Counter Sta tus Cnnn N/A nnn: 0 ~ 377 (octal) Spec. Relay 1 SPnnn N/A nnn: 0 ~ 777 (o ctal) C.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-51 The corresponding registers of CCM 2 and K-Sequence A ddress Corresponding Relation.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-52 Revision January, 2008, Doc. Name: 2007PDD23000007 Lenze LECOM-A/B Protocol Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1 (Baud rate: 1200/2400/4800/9600/19200). Controller station number: 1 (1~99).
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-53 Read/Wri te Range Word No. Bit No. LowByte HighByte Register Type Format subcode Data Length CDn n: 1 ~ 10000 N/A N/A DoubleWord Parameter withou t subcode CDn.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-54 Revision January, 2008, Doc. Name: 2007PDD23000007 Only VH type parameter can provide Bit read/write function (it is convenient for the user to re ad/write Bit No. of parameters). CBn.b, CWn (CWn.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-55 y 00 indicates the global broadcastin g number (1~99). y 10, 20, 30, 40, 50, 60, 70, 80, 90 are local broadcasting numbe r. The affected ranges are: 11~19, 21~29, 31~39, 41~49, 51~59, 61~69, 71~79, 81~89 and 91~99 respectively.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-56 Revision January, 2008, Doc. Name: 2007PDD23000007 If the read/write address format is set to CDn, read/wri te value is the whole Double Word of CDn (1 address). iii) When using character device (e.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-57 LG Master K120S/200S Back to Table A. HMI factory settings Baud rate: 38400, 8, None, 1. (RS-232) Controller station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-58 Revision January, 2008, Doc. Name: 2007PDD23000007 RS-232 DOP 9 pin D-SUB male (RS-232) Controller 9 pin D-SUB mal e (RS-232 for LG K1.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-59 LG Glofa GM6 CNET Back to Table A. HMI factory settings Baud rate: 19200, 8, None, 1. (RS-232) Controller station number: 0. Control area/status area: %MW0 / %MW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-60 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 via CPU Port DOP 9 pin D-SUB male (RS-23.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-61 LG Master-K CNET Back to Table A. HMI factory settings Baud rate: 38400, 8, None, 1. (RS-422) Controller station number: 0. Control area/status area: DW0 / DW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-62 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-422 via G6L-CUEC CNET communication module D.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-63 LG XGT CNET Back to Table A. HMI factory settings Baud rate: 9600, 8, None, 1. Controller station number: 0. Control area/status area: DW0 / DW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-64 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-422 via XGL-CH2A CNET communication module (.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-65 LIYAN LYPLC EX Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller station number: 0. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-66 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-67 M2i Master Back to Table A. HMI factory settings Baud rate: 38400, 8, None, 1. Controller station number: 1. Control area/status area: SB0 / SB10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-68 Revision January, 2008, Doc. Name: 2007PDD23000007 M2i S lave Back to Table A. HMI factory settings Baud rate: 38400, 8, None, 1. Controller station number: 1 (no fun ction) Control area/status area: SB0 / SB10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-69 Matsushita FP PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1. Controller station number: 238. Control area/status area: DT0 / DT10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-70 Revision January, 2008, Doc. Name: 2007PDD23000007 ¾ Increase the range of read / write add re ss (for FP2SH / FP10SH controllers).
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-71 Mirle FAMA SC Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller station number: 0. Control area/status area: 40100 / 40200.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-72 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi FX/FX2N PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller Station number: 0. (no PLC station number in proto col, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-73 Cont acts Read/Wri te Range Contact type Fo rmat Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-74 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi FX3U PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller Station number: 0. (no PLC station number in proto col, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-75 C. Connections (Connector Pinout s) RS-422 DOP Series 9 pin D-SUB male (RS-422) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-76 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi A Series AJ71UC24 Communication Module Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1. Controller Station number: 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-77 Cont acts Read/Wri te Range Contact type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-78 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi A2A/A2AS/A2USH A1SH/A3N/A 2ASH (CPU-S1) CPU Port Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1. Controller Station number: 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-79 6) Max. read/write registers & relays for communi cation once 128 Words (256 bytes) Registers 64 Words (128 bytes) Rel ays B. Definition of controller Read/ Write address Registers Read/Wri te Range Register Type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-80 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-422 DOP Series 9 pin D-SUB male (RS-422) Con.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-81 Mitsubishi Q Series CPU Port Back to Table A. HMI factory settings Baud rate: 19200, 8, ODD, 1. Controller Station number: 0. (no PLC station number in proto col, therefore, only 1(HMI) to 1 (PLC) communication is allo wed.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-82 Revision January, 2008, Doc. Name: 2007PDD23000007 Read/Wri te Range Register Type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-83 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-84 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi Q Series Computer Link Back to Table A. HMI factory settings Baud rate: 19200, 8, None, 1. Controller Station number: 0. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-85 Read/Wri te Range Contact type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-86 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi FX Series PLC via Computer Link Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller Station number: 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-87 Read/Wri te Range Contact type Format Word No. Bit No. Input Relay Xn N/A n: 0-377(octal) Output Rela y Yn N /A n: 0-377(oc tal) Timer Flag Tn N/A n: 0-255 Counter F lag Cn N/A n: 0-255 C.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-88 Revision January, 2008, Doc. Name: 2007PDD23000007 Mitsubishi J2s Series Servo Back to Table A. HMI factory settings Baud rate: 9600, 8, Even, 1 (RS-232). Controller Station number: 0. Control area/status area: None / None.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-89 Read/Wri te Range Contact type Format Wor d No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-90 Revision January, 2008, Doc. Name: 2007PDD23000007 MKS BY125 Low Cost Synchroc ontroller Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller Station number: 11 (NOTE 1) .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-91 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-92 Revision January, 2008, Doc. Name: 2007PDD23000007 (C15, C16, C17). If the data length is out of this r ange, i.e. occupy other ad dresses except C0~C17, an error may occur. 6) The effective addresses of Cn are not consecutive (5 blocks: C0~1 7, C40~41, C45~C48, C50, C90~C92).
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-93 MKS CT150 Back to Table A. HMI factory settings Baud rate: 9600, 7, E, 1. (RS-232) Controller Station number: 11. Control area/status area: None / None.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-94 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-95 MKS MC700/720 Motion Con troller Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. Controller Station number: 11 (NOTE 1) .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-96 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 DOP 9 pin D-SUB male (RS-232) Controller.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-97 3) Only one data (1 Word/ 1 Double Word / 1 Bit) can be read and written for each communi cation.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-98 Revision January, 2008, Doc. Name: 2007PDD23000007 Modbus(Master) --- 984 RTU / ASCII mode Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. (ASCII) 9600, 8, EVEN, 1. (RTU) Controller station number: 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-99 Modbus Hexadecimal Address (Maste r) --- RTU / ASCII mode Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. (ASCII) 9600, 8, EVEN, 1.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-100 Revision January, 2008, Doc. Name: 2007PDD23000007 Cont acts Read/Wri te Range Contact type Format Word No. Bit No. Discrete Outp uts RWB-n N/A n: 0 ~ FFFF Discrete Inputs RB-n N/A n: 0 ~ FFFF ¾ RWB- : can Read and Writ e.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-101 Modbus nW (Master) --- RTU / ASCII mode Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. (ASCII) 9600, 8, EVEN, 1. (RTU) Controller station number: 1.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-102 Revision January, 2008, Doc. Name: 2007PDD23000007 Modbus (Slave) --- RTU / ASCII mode Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 1. (ASCII) 9600, 8, EVEN, 1. (RTU) Controller station number: 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-103 CrossReference T able (Inter Memory of Delta HMI and Modbus Referen ce Address) In.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-104 Revision January, 2008, Doc. Name: 2007PDD23000007 Inter Memory of Delta HMI Modbus Reference Address Supporting Modbus Function Address of Fu nction $M200.1 0 1026 0 1H, 05H, 0FH 0401H .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-105 Modicon TSX Micro (Uni-Tel w ay) Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1. Controller station number: 2. Control area/status area: %MW0 / %MW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-106 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 It needs to use specific cable of Modicon Uni-Telway.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-107 Modicon TSX Micro (Modbus RTU) Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 1. Controller station number: 2. Control area/status area: %MW0 / %MW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-108 Revision January, 2008, Doc. Name: 2007PDD23000007 Modicon TWIDO Back to Table Its function is the same as Modbus (Master) --- 984 RTU .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-109 Moeller PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, NONE, 1(RS-232). Controller Station number: 2. Control area/status area: MW0/MW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-110 Revision January, 2008, Doc. Name: 2007PDD23000007 NOTE 1) Communication Setting The read and write range o f register Marker (Device M W) of PS4 Series must be set via PC software or PLC program before connecting to HMI; otherwise, the communi cation error may occur.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-111 NIKKI DENSO NCS-FI/FS Series Back to Table A. HMI factory settings Baud rate: 9600, 8, ODD, 2. Controller station number: 1. (v alid station numb er: 0 ~ 99) Control area/status area: None.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-112 Revision January, 2008, Doc. Name: 2007PDD23000007 For example, if setting the starting address as RW900 and the data size is Double Word, the read/write value will be a Double Word which contains RW9 00(low word) and RW901(hig h word).
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-113 C. Connections (Connector Pinout s) RS-422 DOP 9 pin D-SUB male (RS-422) Controlle.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-114 Revision January, 2008, Doc. Name: 2007PDD23000007 Omron C Series PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 2. Controller station number: 0. Control area/status area: DM0 / DM10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-115 DOP 9 pin D-SUB male (RS-432) Controller 25 pin D-SUB male (RS-432) Controller 25 .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-116 Revision January, 2008, Doc. Name: 2007PDD23000007 Omron CJ1/CS1 Series PLC Back to Table A. HMI factory settings Baud rate: 9600, 7, EVEN, 2. (RS-232) Controller station number: 0. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-117 ¾ CJ1M Models: An: A0-A477 is “read only”.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-118 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 CJ1M CPU module DOP Series 9 pin D-SUB .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-119 Omron TPM1A PLC Back to Table Its function is the same as Omron C Series PLC .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-120 Revision January, 2008, Doc. Name: 2007PDD23000007 Siemens S7 200 PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, EVEN, 1. Controller station number: 2. Control area/status area: VW0 / VW10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-121 Read/Wri te Range Contact type Format Word No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-122 Revision January, 2008, Doc. Name: 2007PDD23000007 Siemens S7 300 PLC (with PC Adapter) Back to Table A. HMI factory settings Baud rate: 38400, 8, ODD, 1. (RS-232). Controller station number: 2.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-123 Read/Wri te Range Register Type Format Wor d No. Bit No. Output Image QW n n: 0 ~ 65534 N/A Output Image QD n n: 0 ~ 65532 N/A Internal Bits MWn n: 0 ~ 65534 N/A Internal Bits MDn n: 0 ~ 65532 N/A Data Area DBm.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-124 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 HMI connects to PC Adaptor DOP 9 pin D-.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-125 Siemens S7 300 PLC (without PC Adaptor ) Back to Table A. HMI factory settings Baud rate: 19200, 8, EVEN, 1. (RS-485). Controller station number: 2.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-126 Revision January, 2008, Doc. Name: 2007PDD23000007 How many COM ports are connected to S7 300 PLC, how may ite ms can be set.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-127 B. Definition of controller Read/ Write address Register Read/Wri te Range Register Type Format Wor d No.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-128 Revision January, 2008, Doc. Name: 2007PDD23000007 NOTE 2) Low Byte of Bit No. 3) High Byte of Bit No. 4) For all timers, counters and contacts when performing “Multiple Duplicate” functio n: y If it exceeds 65535 when i ncreasing, it will be regarded as 0.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-129 Taian TP02 PLC Back to Table A. HMI factory settings Baud rate: 19200, 7, None, 1. Controller station number: 1. Control area/status area: V1 / V10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-130 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-422 DOP 9 pin D-SUB male (RS-422) Controlle.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-131 Vigor M Series Back to Table A. HMI factory settings Baud rate: 19200, 7, EVEN, 1. Controller station number: 0. Control area/status area: D0 / D10.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-132 Revision January, 2008, Doc. Name: 2007PDD23000007 C. Connections (Connector Pinout s) RS-232 (PROGRAMME R PORT) DOP 9 pin D-SUB male.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-133 VIPA PLC Back to Table Its function is the same as Siemens S7 300 PLC ( w ith PC Adaptor) .
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-134 Revision January, 2008, Doc. Name: 2007PDD23000007 YOKOGAWA ACE PLC Back to Table A. HMI factory settings Baud rate: 9600, 8, EVEN, 1. (ASCII code) Controller station number: 1. CPU NO.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series Revision January, 2008, Doc. Name: 2007PDD23000007 1-135 ¾ WORD_DEVICE_I / WORD_DEVICE_E / WORD_DEVI CE_L / WORD_DEVICE_M: Address must be 1 or the multiple of 16+1. ¾ WORD_DEVICE_X / WORD_DEVICE_Y / WORD_DEVI CE_L / WORD_DEVICE_W: Valid address is inconsecutive.
Delta DOP Series HMI Co nnection Manual | DOP-A/AE/AS Series 1-136 Revision January, 2008, Doc. Name: 2007PDD23000007 This page int entionally left blank.
Ein wichtiger Punkt beim Kauf des Geräts Delta Electronics DOP-A/AE/AS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Delta Electronics DOP-A/AE/AS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Delta Electronics DOP-A/AE/AS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Delta Electronics DOP-A/AE/AS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Delta Electronics DOP-A/AE/AS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Delta Electronics DOP-A/AE/AS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Delta Electronics DOP-A/AE/AS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Delta Electronics DOP-A/AE/AS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Delta Electronics DOP-A/AE/AS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
