Benutzeranleitung / Produktwartung Z01G des Produzenten Dell
Zur Seite of 36
Alienware Graphics Amplifier User’s Guide Regulatory Model: Z01G Regulatory Type: Z01G001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents Before Working Inside Your Alienware Graphics Amplifier........................................................................................ 5 Before You Begin ...............................................................................
Troubleshooting........................................................................ 35 Getting Help and Contacting Alienware............................... 36 Self-Help Resources ....................................................................
Before Working Inside Your Alienware Graphics Amplifier CAUTION: To avoid damaging the components and cards, handle them by their edges and avoid touching pins and contacts. NOTE: The images in this document may differ from your device depending on the configuration you ordered.
CAUTION: Only a certified service technician is authorized to remove the device cover and access any of the components inside the device. See the safety instructions for complete information about safety precautions, working inside your device, and protecting against electrostatic discharge.
After Working Inside Your Alienware Graphics Amplifier CAUTION: Leaving stray or loose screws inside your device may severely damage your device. 1 Replace all screws and make sure that no stray screws remain inside your device. 2 Connect any external devices, peripherals, and cables you removed before working on your device.
Views This chapter lists out the features available on your Alienware Graphics Amplifier. Front View 1 AlienHead/Docking status light 2 Service Tag/Regulatory labels 8.
Back View 1 Release latch 2 Power port 3 Power-supply diagnostic button 4 Power-supply status light 5 USB 3.0 ports (4) 6 External graphics port 7 Graphics-card slot 9.
Graphics Cable 1 Release clips (2) 2 Undock button 3 Docking status light 4 Graphics cable 10.
Specifications Dimensions and Weight Width 138 mm (5.43 in) Height 150 mm (5.90 in) Depth 375 mm (14.76 in) Ports and Connectors External: USB USB 3.0 ports (4) Video One external graphics port Intern.
Device Environment Feature Specification Altitude: Operating –15.20 m to 3048 m (–50 ft to 10,000 ft) Storage –15.20 m to 10,668 m (–50 ft to 35,000 ft) Airborne contaminant level G1 as defined by ISA-S71.
Using the Alienware Graphics Amplifier This section will provide procedures on how to install and uninstall the Graphics card. WARNING: Disconnect all cables before working inside your device. CAUTION: Handle the components with care. Hold the graphics card at its edges.
Installing the Graphics Card NOTE: The graphics card is sold separately. 1 Slide the release latch to release the cover. 1 release latch 2 cover 14.
2 Lift the cover and open it as far as possible. 1 cover 3 Remove the screws that secure the graphics card fillers to the chassis. NOTE: Remove only one filler if you are installing a single width graphics card.
4 Lift the graphics card fillers away from the chassis. 1 screws (2) 2 graphics card fillers (2) 16.
5 Disconnect the power cables from the slots on the device. 1 power cables (2) 2 slots (2) 6 Align the connector on the graphics card with the slot on the system board and press down the card until it locks into position.
7 Replace the screws that secure the graphics card to the chassis. 1 screws (2) 2 graphics card 18.
8 Connect the power cables to the power-cable connectors on the graphics card. NOTE: The location of the power-cable connectors may be different on your graphics card.
9 Close the cover and press down until it locks into position. 1 cover 20.
Removing the Graphics Card 1 Slide the release latch to release the cover. 1 release latch 2 cover 21.
2 Lift the cover and open it as far as possible. 1 cover 22.
3 Press the tabs and disconnect the power cables from the graphics card. 1 power cables (2) 2 tabs (2) 4 Remove the screws that secure the graphics card to the chassis. 5 Press the release latch to release the graphics card from the slot on the system board.
6 Lift the graphics card away from the chassis. 1 release latch 2 screws (2) 3 graphics card 7 Slide the graphics card fillers into the slots on the graphics card.
9 Connect the power cables to the slots on the device. 1 screws (2) 2 graphics card fillers 25.
10 Close the cover and press down until it locks into position. 1 cover 26.
Setting Up Your Alienware Graphics Amplifier 1 Install the graphics card. See “ Installing the Graphics Card ”. 2 Connect the power cable to the power port on the Alienware graphics amplifier.
3 NOTE: It is recommended to shut down the computer and connect the Graphics cable from the Alienware Graphics Amplifier to your computer and then powering on the computer to dock with the graphics amplifier. Press the release clips and connect one end of the graphics cable to the external graphics port on the Alienware graphics amplifier.
4 NOTE: Shut down your computer before you connect the graphics cable. Press the release clips and connect the other end of the graphics cable to the external graphics port on your computer. The light on the graphics cable turns on indicating the Alienware Graphics Amplifier is connected and ready to use.
2 Connect the graphics cable from the Alienware Graphics Amplifier to the external graphics port on your computer. NOTE: For the location of the external graphics port, see the documentation that shipped with your computer.
Disconnecting Alienware Graphics Amplifier CAUTION: Do not disconnect the graphics cable until the computer has shut down and the light on the graphics cable has turned off. 1 Save and close all open files and exit all open applications. 2 Shut down your computer.
Alternate Methods to Disconnect Alienware Graphics Amplifier CAUTION: Do not disconnect the graphics cable until the computer has shut down and the light on the graphics cable has turned off. Using Keyboard Shortcut 1 Save and close all open files and exit all open applications.
Undock Button Settings This section will provide procedure on how to set the computer’s behavior when the undock button on the graphics cable is pressed. 1 Launch AlienAdrenaline . Windows 8.1 : a) On the Start screen, browse to Apps and click the Alienware Command Center tile.
Installing the Alienware Graphics Amplifier Software NOTE: Alienware Graphics Amplifier software is already installed on your computer. It is a standalone application and not a part of Alienware Command Center.
Troubleshooting Issue Solution Graphics card is not detected Download and install the latest driver for the video card installed in the Alienware Graphics Amplifier. For more information, see the document that came with the video card you purchased. NOTE: The graphics card is sold separately.
Getting Help and Contacting Alienware Self-Help Resources You can get information and help on Alienware products and services using these online self-help resources: Self-Help Information Self-Help Options Accessing Windows Help Windows 8.1 — Open the Search charm, type Help and Support in the search box and press Enter .
Ein wichtiger Punkt beim Kauf des Geräts Dell Z01G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell Z01G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell Z01G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell Z01G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell Z01G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell Z01G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell Z01G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell Z01G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell Z01G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
