Benutzeranleitung / Produktwartung 7.6 des Produzenten Dell
Zur Seite of 84
www .dell.com | support.dell.com Dell™ OpenManage™ Client Instrumentation V ersion 7.6 User’ s Guide.
Notes and Notices NOTE: A NOTE indicates important information that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential da mage to hardware or loss of data and tells you how to avoid the problem. ____________________ Information in this document is subject to change without notice.
Contents 3 Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 7 CIM Overview . . . . . . . . . . . . . . . . . . . . . . . 7 WMI Overview . . . . . . . . . . . . . . . . . . . . . . . 8 Data Sources Used by OMCI . . . . . . . . . .
4 Contents 2 Installing Dell™ OpenManage™ Client Instrumentation . . . . . . . . . . . . . . 17 User Account Contr ol in Windows Vista . . . . . . . . 18 Local Installation . . . . . . . . . . . . . . . . . . . . . 19 Installing the Client . . . .
Contents 5 4A l e r t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Overview . . . . . . . . . . . . . . . . . . . . . . . . . 31 ASF Alerting . . . . . . . . . . . . . . . . . . . . . . . 32 WMI Alerting . . . . . . . . . . . . . . . .
6 Contents Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.
Introduction 7 Introduction The Dell™ OpenManage™ Client Instru mentation (OMCI) software enables remote management application programs to access client system information, monitor the client system status, or chang e the state of the cl ient system; such as shutting it down remotely .
8 Introduction • The CIM data model abstracts and de scribes all elements in a network environment. The CIM schema provides the actual data model descriptions and arranges the network into a series of managed objects, all interrelated and broadly classified.
Introduction 9 OMCI uses a variety of data sources resident on the client system which includes: • Microsoft W in32 WMI providers •S M B I O S • Device drivers • Operating system registry • .
10 Introduction F or example, a management console in the WMI application layer r equests the available free space on the client sy stem hard drive. The WMI application layer makes the r equest over the netwo rk to the CIMOM (in the Dell WMI provider layer) on the client system.
Introduction 11 Features The following are k ey features of OMCI: • CIM 2.6 Schema Support • Dell LegacySelect 2.0 Support • Remote Boot Device Select • WMI Security • Event Reporting • Remote Shutdown • Remote W ake-Up Configurability • WfM V ersion 2.
12 Introduction A network administrator can change the settings of these components either through the computer's system setup or by using a WMI management application. NOTICE: Changing LegacySelect attributes such as Integrated Drive Electronics (IDE) Controller may cause a computer sy stem to become unusable.
Introduction 13 processes that may be running. If the temperature incr eases too quickly and OMCI does not poll the system in ti me, it will not generate a shutdown message and the system will not shut down cleanly . OMCI also contains a start delay for the polling intervals.
14 Introduction • Additional Display Device Information: Earlier OMCI releases provided limited display device informati on. OMCI 7.6 also provides the manufacture date in <yyyy W eek ww > format; y-year , w-week number (for example, 2008 W eek 16) and the po ssible sleep states of the monitor .
Introduction 15 Other Dell Documents Y ou Might Need In addition to this User's Guide , you can find the following guides either on the Dell Support website or on the Systems Management T ools an.
16 Introduction.
Installing Dell™ OpenManag e™ Client Instrumentation 17 Installing Dell™ OpenManage™ Client Instrumentation Dell OpenManage Client Instrumentation (OMCI) can be installed locally using the OMCI installation wizard, or r emotely through a silent or administrative installation.
18 Installing Dell™ OpenManage™ Client Instrumentation NOTE: Y ou cannot upgrade from OMCI 6. x to OMCI 7.6 using the OMCI 7.6 installer if the target sy stem has OMCI 6. x on it. Ensure that you uninstall OMCI 6. x before installing OMCI 7.6. OMCI version 7.
Installing Dell™ OpenMana ge™ Client Instrumentation 19 or to click Cancel when performing functions that may entail a security risk. W ith U AC, you can run most applicatio ns, components and processes with a limited privilege, but have elevation po tential for specific administrative tasks and application functions.
20 Installing Dell™ OpenManage™ Client Instrumentation 5 When the InstallShield Wizard window displays the Welcome message, click Next . The InstallShield Wizard window displays the message Setup Type .
Installing Dell™ OpenMana ge™ Client Instrumentation 21 Silent Installation Installing the Client in the Silent Mode In the silent mode (no dialog box es appear), you can perform complete and custom installations. NOTE: When typing commands, enter spaces exactly as shown in the examples in this section.
22 Installing Dell™ OpenManage™ Client Instrumentation Upgrading the Client in Silent Mode T o upgrade from one version of OMCI 7. x to a later version of OMCI 7. x , ex ecute the following command: setup.exe /s /v"/qn REINSTALLMODE=voums REINSTALL= ALL" A reboot might be r equired for the u pgrade.
Installing Dell™ OpenMana ge™ Client Instrumentation 23 Administrative Installation T o create a server image of OMCI on your network using an administrative installation, perform the following steps: 1 Using the OMCI installation pack age, run the following command: setup.
24 Installing Dell™ OpenManage™ Client Instrumentation.
Windows Management Instrumentation 25 Windows Management Instrumentation WMI Overview Microsoft ® Wi n d o w s ® Management Instrumentation (WMI) is Microsoft’s implementation of the W eb-Based Ente rprise Management (WBEM) effort. It is implemented on Microsoft W indows platforms.
26 Windows Management Instrumentation or limited, can be granted to users on per -namespace basis. There is no implementation of class or property - level security . By default, users that are members of the administrators group have full local and remote access to WMI.
Windows Management Instrumentation 27 T o retrieve these Dell attributes, edit the sms_def.mof file available on the SMS server in the smsinboxesclifiles.srchinv directory . Add the following lines to the end of the sms_def.mof file : [SMS_Report(TRUE), SMS_Group_Name("Dell Summary"), ResID(7000),ResDLL("dellwmi.
28 Windows Management Instrumentation instance of __Insta nceProviderRegistration { Provider = $Q; SupportsGet = TRUE; SupportsPut = TRUE; SupportsDelete = TRUE; SupportsEnumeration = TRUE; QuerySuppo.
Windows Management Instrumentation 29 The following text files contain sample scripts. T o e xecute any of the scripts, save the script with a .vbs extension. At the command prompt, type cscript.exe //nologo <script name> and the appropriate parameters.
30 Windows Management Instrumentation.
Alerts 31 Alerts Overview Alerts are generated when a system’s state of inter est changes. There are two basic types of alerting: local alerting to the current computer user and r emote alerting to a management applic ation. Dell™ OpenManage™ Client Instrumentation (OMCI) handle s both types of alerting.
32 Alerts The system network interface card (N IC) and basic input/output system (BIOS) support ASF 2.0. If the BIOS allows for any ASF 2.0 configuration, then the BIOS settings are e xposed through the Microsoft ® W indows ® Management Instrumentation (WMI) by OMCI.
Alerts 33 Y ou are also provided with an option to r eceive either a single alert or a limited number of alerts of the occurrence of an event, of a given type. Y ou can mask out specific events and can generate single alert mes sages for on ly th ose e vents .
34 Alerts The following properties in the Dell_Configuration class allows you to control the notices sent to the NT event log and to the local display based on the severity of the event: • GlobalNTE.
Alerts 35 The lowest WMI severity level that OMCI sends is W ARNING_DEGR ADED and the highest is CRITICAL. The severities of OMCI 7. x events are listed in T able 4-1. OMCI sends local alerting and remote alerting for al l the listed events. . T able 4-1.
36 Alerts DiskCapacity (105) One of the hard drives is running out of free space. In OMCI 7.0, only one user -defined threshold is used. The threshold is expr essed as an absolute value in megabytes (MB). The default value is 50 MB. An event is generated when available free space on one of the hard drives falls below this threshold.
Alerts 37 1 The event is specific to OMCI 7.0. 2 The event is specific to OM CI 7.1 and later versions. MemorySizeIncreased (103) The memory size has been increased. 2 W ARNING_DEGR ADED 3 MemorySizeDecreased (104) The memory size has been decreased. 2 W ARNING_DEGR ADED 3 NumberOfDisksDecreased (102) A hard d rive has been rem ove d.
38 Alerts.
Component Descriptions 39 Component Descriptions T able 5-1 lists the Dell™ instrumentation components, their functions, their default installation locations, and other relevant information. NOTICE: Changing or deleting comp onent files may cause Dell ™ OpenManage ™ Client Instrumentation (OMCI) to bec ome un usabl e.
40 Component Descriptions SMBIOS %P rogramFiles%DellOpen Manage Clientdsmbios.dll Component that retrieves data from the system management basic input/output system (SMBIOS) data tables and reads and writes Dell system data into the BIOS through system management interrupts (SMIs) and the CMOS.
Component Descriptions 41 PC Card %P rogramFiles%DellOpen Manage Clientdpccard.dll Data-provider DLL that gives information about th e PC Car ds (removable I/O car ds such as a modem, local area network [LAN], syn chro nous RAM [SRAM], or flash memory card) pr esent in a system.
42 Component Descriptions Indication Consumer %P rogramFiles%DellOpen Manage ClientIndiCons.dll DLL that subscribes to the CIMOM for indications of interest. It is supplied by the indication provider when events are detected. The providers send indications to the CIMOM, and the CIMOM forwards them to their subscribers.
Component Descriptions 43 DSMBIOS Data Routing Fi l e %P rogramFiles%DellOpen Manage Clientdsmbios_data.htm HTML file that contains configuration information for dsmbios.dll . IAP Data Routing F ile %P rogramFiles%DellOpen Manage Clientiap_routing_data.
44 Component Descriptions 1 The component is specific to OMCI 7.0. 2 The component is specifi c to OMCI 7.1 and later . Dell Instantiation MOF 2 %P rogramFiles%DellOpen Manage ClientMofsDellOMCI_Inst ant.mof MOF file that provides the default values to the instances of the Cost of Ownership (COO) classes defined in DellOMCI.
T roubleshooting 45 T roubleshooting W akeup on LAN If W akeup on LAN does not function on a client computer system, perform the following checks: • Use either Dell™ OpenManage™ IT Assistant or system setup on the client system to verify that W akeup on LAN is enabled.
46 T roubleshooting • If both the server and the client system are in a domain, perform the following steps: – V erify that the domain administrator account has administrator privileges for both systems. – If you are using IT Assistant on the server system, run the IT Assistant ConfigServices utility ( configservices.
T roubleshooting 47 – Create an account on the client system with the same user name and password as an administrator acco unt on the system running your WMI management application. – If you are using IT Assistant, run the IT Assistant ConfigServices utility ( configservices.
48 T roubleshooting –S e t t h e Local Security setting to Classic - local users authenticate as themselves for Network access: Sharing and security model for local accounts in the Local Security P olicy . – In case of W indows Vista ® , disable U AC on the system.
Sample Scripts and BIOS Settings 49 Sample Scripts and BIOS Settings WMI Sample Scripts Clear Chassis Intrusion Status Below is a sample VBScript that will cl ear the chassis intrusion status of a system. This script can be run locall y or remotely using the name of the system.
50 Sample Scripts and BIOS Settings '*** Declare variables Dim strNameSpace Dim strComputerName Dim strClassName Dim strKeyValue Dim objInstance Dim strPropName Dim strPropValue '*** Check that the right e xecutable was used to run '***the script and that all parameters were passed.
Sample Scripts and BIOS Settings 51 '*** Set the value of ChassisIntrusionStatus to'5' '***("Clear") '***Set the new value for the property and save the instance objInstance.Properties_.Item (strPropName).Value = 5 objInstance.
52 Sample Scripts and BIOS Settings '*** Purpose: To disable the desktop message box for '***all alerts on a Dell OMCI client. '***Usage: cscript.
Sample Scripts and BIOS Settings 53 '*** Initialize variables strNameSpace = "root/Dellomci" strComputerName = WScript.Arguments(0) strClassName = "Dell _IndicationStaticValues&quo.
54 Sample Scripts and BIOS Settings strMessage = "incorrect syn tax. You should run: " & vbCRLF & _ "cscript.exe /nologo SampleDisableAlertMessag es.vbs <systemname>" WScript.Echo strMessage End Sub Remote Sy stem Shutdown Below is a sample VBScript that will shut down a Dell™ OMCI client rem ot el y .
Sample Scripts and BIOS Settings 55 '*** Check that the right executable was used to run the script '*** and that all pa rameters were passed If (LCase(Right(WScrip t.FullName, 11)) = "wscript.exe" ) Or _ (Wscript.Arguments.Count < 1) Then Call Usage() WScript.
56 Sample Scripts and BIOS Settings '*** Sub used to display the correct usage of the script Sub Usage() Dim strMessage strMessage = "incorrect syn tax. You should run: " & vbCRLF & _ "cscript.exe //nolo go SampleShutdown.vbs <systemname>" WScript.
Sample Scripts and BIOS Settings 57 Dim objInstance Dim ObjOutParam Dim strMethod '*** Check that the right executable was used to run the script '*** and that all pa rameters were passed If (LCase(Right(WScrip t.FullName, 11)) = "wscript.
58 Sample Scripts and BIOS Settings WScript.Echo "Method failed." End If '*** Sub used to display the correct usage of the script Sub Usage() Dim strMessage strMessage = "incorrect syn tax. You should run: " & vbCRLF & _ "cscript.
Sample Scripts and BIOS Settings 59 '*** Declare variables Dim strNameSpace Dim strComputerName Dim strClassName Dim strPropValue Dim objInstance Dim ObjOutParam Dim strMethod Dim objMethod Dim o.
60 Sample Scripts and BIOS Settings '*** Set the In parameter of the method to the URL of BIOS header file Set objInParam = objMethod.inParameters .SpawnInstance_() objInParam.sUrl = W Script.Arguments(1) '*** Execute the method Set ObjOutParam = objCla ss.
Sample Scripts and BIOS Settings 61 Enabling PXE Boot on the Next Reboot Below is a sample VBScript that will force a Dell OMCI client to boot to PXE on next r eboot. '*************************** ************************* '*** Name: SampleForcePXE.
62 Sample Scripts and BIOS Settings (Wscript.Arguments.Count < 1) Then Call Usage() WScript.Quit End If '*** Initialize variables strNameSpace = "root/Dellomci" strComputerName = WScript.
Sample Scripts and BIOS Settings 63 '*** Sub used to display the correct usage of the script Sub Usage() Dim strMessage strMessage = "incorrect synt ax. You should run: " & vbCRLF & _ "cscript.exe //nolog o SampleForcePXE.vbs <systemname>" WScript.
64 Sample Scripts and BIOS Settings Dim strComputerName Dim strClassName Dim strKeyValue Dim objInstance Dim strPropName Dim strPropValue '*** Check that the right e xecutable was used to run the script '*** and that all para meters were passed If (LCase(Right(WScript.
Sample Scripts and BIOS Settings 65 '*** Set the new value for the property and save the instance objInstance.Properties_.Item(strPropName).Val ue = 6 objInstance.Put_ '*** If any errors occurr ed, let the user know If Err.Number <> 0 Then WScript.
66 Sample Scripts and BIOS Settings disclaims any '*** liability in connection therewith. Dell provides no technical '*** support with regard to such scripting. For more information on WMI '*** scripting, refer to applicable Microsoft documentation.
Sample Scripts and BIOS Settings 67 WHERE " & _ strKeyName & "=" & Chr( 34) & strComputerName & Chr(34) '*** Retrieve instances of Dell_Configuration class (there should only '*** be 1 instance).
68 Sample Scripts and BIOS Settings Sub Usage() Dim strMessage strMessage = "incorrect syn tax. You should run: " & vbCRLF & _ "cscript.
Sample Scripts and BIOS Settings 69 Dim strPropName Dim strPwd '*** Check that the right executable was used to run the script '*** and that all pa rameters were passed If (LCase(Right(WScrip t.FullName, 11)) <> "cscript.exe" ) Or _ (Wscript.
70 Sample Scripts and BIOS Settings '*** If any errors occur red, let the user know If Err.Number <> 0 Then WScript.Echo "Setting the BIOS password failed." End If '*** Sub used to display the correct usage of the script Sub Usage() Dim strMessage strMessage = "Incorrect syn tax.
Sample Scripts and BIOS Settings 71 • CellularRadio • ChassisIntrusion • ChassisIntrusionStatus • ClearSystemEventLog* • Cool and Quiet* • CPU Virtualization* •D A S H O n * • Embedded.
72 Sample Scripts and BIOS Settings • Microphone* • ModuleBayDevice* • MonitorT oggling* • MultiCore NOTE: On some Dell sy stems, the MultiCore property in the Dell_SMBIOSSettings class display s Enabled or Disabled even if the inst alled processor does not support multi-core technology .
Sample Scripts and BIOS Settings 73 • P rimaryVideo • RadioT ransmission • Safe USB* •S A T A D I P M * • SecondaryP arallelA T AMaster • SecondaryP arallelA T ASlave • SerialA T AChanne.
74 Sample Scripts and BIOS Settings • USBFlashDriveEmulation* • USBF rontP anelP orts • USBP orts • USBP ort00*, USBP ort01*, USBP ort02*, USBP ort03*, USBP ort04*, USBP ort05*, USBP ort06*, U.
Glossary 75 Glossary The following list defines or identifies technical terms, a b bre vi at io n s, a nd acronyms used in this guide. ASF Abbreviation for Alert Standard Form at—Defines remote control and alerting interfaces for operating system absent environments.
76 Glossary CLI Abbreviation for command line interface. A CLI displays a prompt, the user types a command on the keyboard and terminate s the command (usually with the Enter key), and the system executes the command, providing textual output.
Glossary 77 DLL Abbreviation for Dynamic Link Library which is Microsoft's implementation of the shared library concept in the Micros oft Windows operating systems. These libraries usually have the file extension DLL, OCX (for libraries containing ActiveX controls), or DRV (for legacy syst em drivers).
78 Glossary firmware Software (programs or data) that has been written onto read-only memory (ROM). Firmware can boot and operate a device. Each controller contains firmware that helps provide th e controller's functionality.
Glossary 79 SMART Acronym for Self - Monitoring, Analysis, and Reporting Technology, which is a monitoring system for system hard disks to detect and report on various indicators of reliability, in the hope of anticipating failures.
80 Glossary to diagnose and upgrade a remote system while the user of that system continues working on other tasks. It also allows software up grades in the background or during scheduled hours.
Index 81 Index A alerts, 31 events polled, 3 5 local, 3 2 r e m o t e , 31-32 ASF , 31 alerting, 3 2 C CIM, 7 cim_iap_data.htm, 4 2 cim_win32_data.htm, 4 2 overview , 7 schema, 8 CIMOM, 8, 25 COM, 25 Computer management console, 26 D Data, 8 data provider , 9 data router , 9 DCOM, 12, 45 ddisks.
82 Index J JScript, 28 L language, specifying, 19, 21 LegacySelect, 11 M MOF , 8 O OMCI, 7, 9 architecture, 9 B I O S t o k e n s , 14, 70 data sources, 8 features, 1 1 omci.
Index 83 WMI, 7-8, 25, 34, 49 alerting, 3 2 application layer , 9 control, 2 6 overview , 8 provider , 9 rep os it or y , 2 5 sample script examples, 4 9 scripts, 2 8 security , 2 5 severity levels, 3.
84 Index.
Ein wichtiger Punkt beim Kauf des Geräts Dell 7.6 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell 7.6 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell 7.6 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell 7.6 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell 7.6 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell 7.6 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell 7.6 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell 7.6. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell 7.6 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
