Benutzeranleitung / Produktwartung 5002 des Produzenten Dell
Zur Seite of 68
www .dell.com | support.dell.com Installing and Configuring the Dell™ Internal Wireless Card Model 5002.
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make b etter use of your computer . NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION ind icates a potential for property damage, personal injury , or death.
Contents 1 Contents This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn . . . . . . . . . . . . . . . . . . 4 About Notes and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the Dell Internal Wireless Adapt er Hardware .
2 Contents Appendix D. Additional functions . . . . . . . . . . . . 3 4 Printer properties settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Firmware upgrade (HTTP) . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3 Appendix H. Wireless Specifications . . . . . . . . . . 5 5 Appendix I. Regulatory statement . . . . . . . . . . . . . 5 6 FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 EU Compliance .
4 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn About Notes and Cautions NOTE: A NOTE indicates important information that helps you make b etter use of your computer .
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 5 Installing the Dell Inte rnal Wireless Adapter Hardware 1 Ensure that the printer is turned off and the pow er cord is unplugged from the power source. CAUTION: Failure to unplug the printer could cause damage to the printer .
6 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 2 Slide the control board cover towar ds th e back of the printer to open it.
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 7 4 Align and insert the Dell Internal W i reless Adapter into the connector on the control board. P ush it into the connector until it is firm and secure. 5 Replace the control board cover .
8 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn Configuring the Dell Internal Wireless Adapter Before installing the printer ’s driver on your computer , you must configure the appropriate network para me ters of the print er .
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 9 Install Dell W ireless Adapter Po w e r u p p r i n t e r Configur e Dell Internal W ireless Adapter (3 methods) Method 1.
10 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn Method 1: The Dell Internal W ireless Adapter can be configured at the printer's operat or panel. This method only supports open network systems, WEP network security and WP A network security .
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 11 Or , • Custom : Allows users to enter a SSID and set the security mode and key manually .
12 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn c Pre s s Scroll ( or ) to highlight Network Settings and press Select () . d The printer Configuration P age is printed. F or Dell 2335dn MFP : a On the main menu of the operator panel, scroll to Setup using Scroll ( o r ) a n d p r e s s Select () .
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 13 d The printer Configuration P age is printed. F or Dell 2335dn MFP : a On the main menu of the operator panel, scroll to Setup using Scroll ( o r ) a n d p r e s s Select () .
14 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 4 P ress the up/d own arrows to select Wir ele ss . 5 P ress the up/d own arrows to select WPS Settings . 6 Select WPS mode you want. F or Connect via PBC mode : a Pre s s Connect via PBC on the touch screen.
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 15 9 Once you have configured the printer , you may want to prin t a Configuration P age to confirm your settings. a Pre s s Setup Machine Setup from the home screen. b P ress the Next ( ) button.
16 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn Or , • T emporari ly connect one end of the supplied Ethernet cable to the printer and the other to your wireless enabled computer . Y ou may need to change your PC network IP settings to communicate with the printer .
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 17 Using the printer's Embedded Web Server to configure the Dell Internal Wireless Adapter 1 Launch your inter net browser window and type in the IP address of the printer in the address bar .
18 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 4 After you have set your network settings, click the Apply button at the bottom of the page to co nfirm and apply your wir eless settings and remove Ethernet cable to start Wir eless Network connection.
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 19 F or Dell 2355dn MFP : a Pre s s Setup Machine Setup from the home screen. b P ress the Next ( ) button. c P ress the up/down arrows to select Rep or ts . d P ress the up/down arrows to select Network Settings .
20 This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn Appendix: If you are using a direct computer to printer connection and are unsure as to how to change your computer’ s IP addre ss, please follow the instructions below.
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn 21 9 P roceed to "Using the printer's Embedded W eb Server to configure the Dell Internal W ireless Adapter" on page 17 to complete configuring Dell Internal W ireless Adapter .
Appendix A. SetIP Address Utility 22 Appendix A. SetIP Address Utility This program is for the network IP setti ng using the MAC address which is the hardwar e ser ial number of the network printer card or interface. Especially , it is for the network administrator to set several network IP s at the same time.
23 Appendix B. Management protocols Appendix B. Management protocols Before using your network printer/MFP , y ou may need to check or configure some parameters using management protocols.
24 Appendix B. Management protocols SNMP Simple Network Management Protocol (SNMP), which is part of the T CP/IP protocol suite, is an applicat ion layer pr otocol that facilitates the ex change of management information between netw ork devices.
Appendix B. Management protocols 25 SLP Service Location Protocol (SLP) is an In ternet standar d network protocol that provides a framework to allow networ king ap plications to discover the existe n.
26 Appendix B. Management protocols Using SLP Once SLP is enabled, the network prin t server works as a Servi ce Agent and the User Agent, for example, EWS, sear ches for the network print server by SLP Protocol.
Appendix B. Management protocols 27 WINS Before Dynamic DNS was defined, DN S could only be updated manually when DHCP servers automatically provide d (or r emoved ) IP addresses.
28 Appendix B. Management protocols The WINS server will update the printer's NetBIOS name in its database. Users can use the printer na me instead of its IP address.
Appendix B. Management protocols 29 • Embedded W eb Service (EWS) : Select P rinter Ser ver Settings Pri n t Server Settings UPnP(SSDP) . – Aut o IP E na b l ed : Y ou can enable or disable A uto IP . When this option is selected, the network print serve r cannot find the con trol point and receive an IP addr ess from the cont rol point.
Appendix C. Printing protocols 30 Appendix C. Printing protocols Before set ting the network printing ports , you must install the printer driver with the local port (LPT ) on the system . Refer to your printer/MFP user ’s guide. Standard TCP/IP port Y ou can print your documents to your ne twork printer by creating a Standar d TCP/IP por t.
Appendix C. Printing protocols 31 6 Enter the IP address or DNS name of your network printer and click Next . F or the port name, a default name wi ll be enter ed by W indows. Y ou can change it to a more user -friendly name. 7 F ollow the instructions on the sc reen to complete installation.
32 Appendix C. Printing protocols 4 Make sur e that the appropriate Standard TCP/IP port is selecte d and click Configure P ort . 5 Select LPR from the Protocol section. 6 Enter the print queue name and click OK . 7 Click OK to close the properties window .
Appendix C. Printing protocols 33 nonce value, the HT TP method, and the requested URI. In this way , the password is never sent in the cl ear to avoid the most serious flaws of Basic authentication. • User Name, P assword : The user name and password can include A to Z, a to z, 0 to 9, and ot her symbols !#$%&()+-.
Appendix D. Additional functions 34 Appendix D. Additional functions The following are additional function s you can use through EWS (Embedded We b S e r v i c e ) . Printer properties settings Y ou can check and modify printer and do cument properties f or an installed printer .
Appendix D. Additional functions 35 3 Configure an IP filter . • IP F iltering Enable : Y ou can enable or disabl e IP filtering. • IP Address 1 ~ IP Address 10 : Y ou can enter filtered IP addresses. Users having the IP addresses se t he re ar e able to access the network print server .
Appendix E. Netware environment 36 Appendix E. Netware environment This wireless network interface card is compatible with Novell NetW are networks in versions 3.x, 4.x, 5.x, and 6.x. Y ou can print to the network printer from any NetW are client that is atta ched to the network.
Appendix E. Netware environment 37 workstation for printing . Configuration for NetW are printing involves creation of printer s, print queues, an d print servers, and the associations between them on the NetW are fil e server .
38 Appendix E. Netware environment • IPX/SPX mode configurat ion : Configure IPX/SPX mode for your NetW are system. – Bindery configuration : Y ou can set up the b indery server . • Bindery Setup : Use this option if you have alr ead y configured one or more bindery servers (file servers running NetW are 3.
Appendix E. Netware environment 39 Printing in NetW are T o print to your network printer on a NetW are workstation, you need to add a print queue. NOTE: T o use bindery emulation, you must log on to a Bindery server as an administrator . In the NDS mode, log on to target text of the NDS tree where you have administrator privileges.
Appendix F . EtherT alk environment 40 Appendix F. EtherT alk environment EtherT alk is AppleT alk used in an Ethern et network. This protocol is widely used in Macintosh network environmen ts. Microsoft W i ndows system also supports this protocol. Like TCP/IP , EtherT alk also provides packet transmissio n and routing functionality .
Appendix F . EtherT alk environment 41 • Pr i n t e r T y p e : shows the printer type. • Zone : shows the available printer zone list. Y ou must select one. • P age Description Language : shows the EtherT alk protocol. 3 Click Submit . Configuring the printer NOTE: The following instructions are for Mac OS 10.
42 Appendix F . EtherT alk environment F or MA C OS 10.6, if Auto Select does not work properly , select Select P rinter Software... and your printer name in Pr i n t U s i n g . 8 Click Add . The printer appears in the Pr i n t e r L i s t as the default printer (in boldface).
Appendix F . EtherT alk environment 43 F or MA C OS 10.5~10.6, ente r the queue name in the Queue field. 7 F or MA C OS 10.3, if Auto Select do es not work properly , select Dell in Pr i n t e r M o d e l and your printer nam e in Model Name . F or MA C OS 10.
44 Appendix F . EtherT alk environment F or MAC OS 10.5~10. 6, press the “ + ” icon then a disp lay window will pop up. 4 F or MA C OS 10.3, select the Ren de zv ou s tab. F or MA C OS 10.4, click Default Browser and find the Bonjour . F or MAC OS 10.
45 Appendix G. Wireless network environment Appendix G. Wireless network environment Overview The W ireless Network P rinter Card supp orts the IEEE 802.
46 Appendix G. Wireless network environment • Infrastructure mode : In Infrastructure mode, wireless devices or workstations communicate with each other through an access p oint (AP). The access point acts like a h ub, providing connectivity for wir ele ss computers.
Appendix G. Wireless network environment 47 Channels There ar e several channels specified in the 802.11b/g standard for wireless communications. The number of available channels authorized for us e may be restricted based on your location (ge nerally regulatory domain).
48 Appendix G. Wireless network environment each key valu e is 10 hexadecimal digi ts (0-9 and A-F) or 5 alphanumeric characters. In 128-bit mode, each key value is 26 he xadecimal digits or 13 alphanumeric characters . Contact your network adminis trator for this configuration.
Appendix G. Wireless network environment 49 • PEAP (P rotected Extensible Authentication P rotocol) : PEAP uses digital certificates for network server authen tication and a password for client authentication.
50 Appendix G. Wireless network environment Network Status This section displays information on the curr ent wireless connection. This window appears when you select Wir e le ss in EWS. The option items may differ due to the printer models. • Link Status : indicates whether or not the WL AN interface is connected to other wireless devices.
Appendix G. Wireless network environment 51 • Fr e q u e n c y M o d e : Choose a frequency mode. The dell print server supports 802.11b and 802.11g fr equency modes. – 802.11b/g (2.4GHz) mode : Data is sent u sing IEEE802.11g standard communications in the 2.
52 Appendix G. Wireless network environment higher priority on a R ADIUS server . A vailable authentications are NONE, EAP -MD5, EAP MSCHAPv2 in 802.1x Authentication on Static WEB sec urity . • Encryption : This option will be change d due to the option you have selected in the A uthentication field.
Appendix G. Wireless network environment 53 • User P asswor d : 802.1x EAP authentication methods, such as EAP -MD5, EAP -MSCAHPv2, E AP - T TLS, and PEAP , requir e an EAP user password as an account passwor d. A user passwor d is necessary , if 802.
54 Appendix G. Wireless network environment 5 In the Certificate Snap-in dialogue box, select Computer Account and click Next Fi n i s h Close OK . 6 Select the certificate you wan t to change to a file. 7 When making a root certificate, select one of the certificates in the trusted root certificate authority folder .
55 Appendix H. Wireless Specifications Appendix H. Wireless Specifications Items Specifications Supported networks • W indows 2000, XP 64 bit (Home & P ro), XP 32 bit (Home & P ro), Server 2.
Appendix I. Regulatory statement 56 Appendix I. Regulatory statement FCC Compliance FCC Statement This device complies with P art 15 of the FCC R ules.
Appendix I. Regulatory statement 57 IMPOR T ANT NOTE: In the event that these conditions cannot be met (for example certain laptop configuratio ns or co-location with another transmitter), then the FCC authorizatio n is no longer considered valid and the FCC ID cannot be used on the final product.
58 Appendix I. Regulatory statement The user ’ s manual for end users must include the following information in a prominent location "IMPOR T ANT NOTE: T o comply with FCC RF exposur e complian.
Appendix I. Regulatory statement 59 2 A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to sati sfy the RF exposur e requir ements of the Council recomm endation 1999/519/EC of 12 July 1999.
60 Appendix I. Regulatory statement Conformity Assessment of the Pr oducts integrating the DELL5002 The following is a supplementary explan ation of conformity assessments for final products integrating the radio modules such as the DELL500 2, that have passed conform ity assessments in accordance with th e R&T TE Dir ective.
Appendix I. Regulatory statement 61 Conformity assessment pro cedures for final products exempte d from R&TTE Directive Article 3.2 In every case, the manufactur er of a fina l product must follow the procedures for conformity assessment of the fina l product with t he requirements of R&TTE Directive Article 3.
Appendix J. OpenSSL License 62 Appendix J. OpenSSL License Copyright (c) 1998-2001 The OpenSSL P roject. All rights reserved. Redistribution and us e in source an d binary forms , with or without modi.
Appendix J. OpenSSL License 63 This product includes cryptographic software written by Eric Y oung (eay@cryptsoft.com). This product in cludes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Y o ung (eay@cryptsoft.
64 Appendix J. OpenSSL License THIS SOFTW A RE IS PRO VIDED B Y ERIC Y OUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED W A RR ANTIES, INCLUDING, BUT NOT LIMITED TO , THE IMPLIED W ARR ANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE ARE DISCLA IMED.
Index 65 Index B Bonjour 43 BOOT P 23 C Certificates client certificate 5 3 making files 5 3 root certificate 5 3 Channels 51 Client certificate installing 5 3 D DDNS 26 DHCP 23 E EtherT alk Bonjour 4.
66 Index R Resetting 11, 50, 51 Root c ertificat e installing 5 3 S SLP 25 SNMP 24 Standard T CP/IP port 30 T TCP /IP in Macintosh 4 2 management protocol BOOTP 2 3 DDNS 2 6 DHCP 23 HTTP 2 3 SLP 2 5 S.
Ein wichtiger Punkt beim Kauf des Geräts Dell 5002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell 5002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell 5002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell 5002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell 5002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell 5002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell 5002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell 5002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell 5002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
