Benutzeranleitung / Produktwartung LCD 32 des Produzenten Daitsu
Zur Seite of 40
LCD Display & TV Operating Instructions.
LCD TV A Wide Array of Screen Settings Y ou can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the lighting or the outside weather conditions). Y ou can switch among the Sport, Movie, Music and Normal options , or you can configure the screen settings yourself.
3 ENGLISH Important Safety Instructions The unit should not be placed in a built-in installation such as a book-case, limited space rack unless proper ventilation is provided. - This may cause fire by overheating or damage the unit by falling. Do not use the unit near water , oil or inflammables.
4 Important Safety Instructions Do not use or store inflammable substances near the unit - This may cause an explosion or fire. Place the antenna away from the electric wire, not to touch even though it falls down by wind. - This may cause an electric shock.
5 ENGLISH ENGLISH T able of Contents Important Safety Instructions ........................................ 3 Unpacking your TV .............................................. 6 Viewing the Control Panels (Front V iew) .................................
6 Unpacking your TV Accessories Remote Control & Batteries (AAA x 2) Please make sure the following items are included with your TV set. If any items are missing, contact your dealer .
7 ENGLISH V iewing the Control Panels Front View Right Side Indicator Red Green Status Stand-by Power on Power Indicator Status 1 2 3 4 5 V olume adjustment Channel selection Input TV/A V selection ME.
8 V iewing the Control Panels Front View Bottom Side Indicator Red Green Status Stand-by Power on Power Indicator Status 1 2 3 4 6 5 MENU selection Input TV/A V selection Channel selection V olume adj.
9 ENGLISH Rear View Headphone Jack A V2 VIDEO Input A V2 AUDIO Input A V2 S-VIDEO Input 1 2 3 4 Right Side 1 3 2 4 V iewing the Control Panels Bottom Side 7 8 6 5 1 2 3 4 9 10 11 Power Inlet with Swit.
10 Remote Control Power On/Off Button Numeric Buttons One/ T wo-Digit Channel Selection Favorite Channel Selection (See page 24) Picture Still (See page 26) Sleep T imer (See page 21) Picture Mode Sel.
11 ENGLISH Inserting Batteries in the Remote Control Connecting an Antenna or Cable Y ou must insert or replace the batteries in the remote control when you purchase the TV or when you find that the remote control is no longer operating correctly .
12 Connecting to the RCA or S-V ideo Input ( Side A V2 ) Connecting to the SCART Input (A) For RCA Input 1. Connect the RCA cable to the input jacks (video+ audio L/R of side A V2) on the TV and output jacks on the external equipment such as a VCR, camcorder and some video game devices.
13 ENGLISH Connecting to a DVD or DTV Set-T op Box INPUT (RCA or DVI) 1. Connect the video cables to the Y , Pb, Pr input jacks (COMPONENT1 or 2) on the TV and the Y , Pb, Pr output jacks on the DVD or DTV Set-T op Box.
14 Connecting the Headphones Y ou can connect a set of headphones to your TV if you wish to watch a program without disturbing the other people. 1. Plug a set of headphones into the 3.5mm mini-jack socket on the right side of your TV . Y ou can be heard the sound through the headphones.
PREVIOUS EXIT ADJUST SELECT 15 ENGLISH Connecting the Power Cord and Switching the TV On / Off 1 Make sure all the necessary connections have been made. 2 Press the POWER ( ) button to switch the TV on. 3 Select the favorite source by pressing the SOURCE ( ) button one or more times.
16 Storing Channels in Memory Press the MENU ( ) button. Press the ( ¥ ) button to select CHANNEL group and press the OK button. Press the ( ) button to select COLOUR SYSTEM . Then press the OK or ( ) button. The sub-menu of the COLOUR SYSTEM function appears.
PREVIOUS EXIT ADJUST SELECT 17 ENGLISH Storing Channels in Memory Press the ( ) button to select EDIT / MANUAL . then press the OK or ( ) button. The EDIT menu appears. Follow the description for the function you want to use, press the a button to complete the settings.
18 Storing Channels in Memory CHANNEL PREVIOUS EXIT ADJUST SELECT COLOUR SYSTEM AUTO PROGRAM EDIT / MANUAL F AVOURITE SETTING CHILD LOCK SET ID NO. 0000 PREVIOUS EXIT ADJUST SELECT Press the MENU ( ) button. Press the ( ¥ ) button to select CHANNEL group and press the OK button.
19 ENGLISH Customizing the Picture Press the MENU ( ) button. Press the ( ¥ ) button to select PICTURE group and press the OK button. Press the ( ) button to select PICTURE MODE then press the OK or ( ) button. ■ Y ou can select one of three PICTURE MODE s to adjust the picture settings automatically .
Press the MENU ( ) button. Press the ( ¥ ) button to select SOUND group and press the OK button. Press the ( ) button to select STEREO / I . II then press the OK or ( ) button. Adjust the STEREO / I . II with ( ¥ ) or ( ) button you wished.
21 ENGLISH TIME PREVIOUS EXIT ADJUST SELECT TIME ON TIME OFF TIME SLEEP TIMER ON TIME VOL. ON TIME CH 00 : AM 00 OFF 00 : AM 00 OFF 12 : AM 30 00 00 TIME PREVIOUS EXIT ADJUST SELECT TIME ON TIME OFF TIME SLEEP TIMER ON TIME VOL.
22 3D SOUND function Press the ( ) button to select one of 3D SOUND modes. When you listen to stereo sound, please select ON or OFF mode. Y ou can enjoy sound similar to the experience at the theatre. ON : Select the ON mode, when you listen to the mono sound.
Press the MENU ( ) button. Press the ( ¥ ) button to select SET UP group and press the OK button. Press the ( ) button to select PC SET UP then press the OK or ( ) button. A Sub-menu of the PC SET UP function appears. Press the ( ) button to select AUTO ADJUST and press the OK button.
PC SET UP 24 This function does not work in DVI-Digital mode. Press the MENU ( ) button. Press the ( ¥ ) button to select SET UP group and press the OK button. Press the ( ) button to select PC SET UP then press the OK or ( ) button. A Sub-menu of the PC SET UP function appears.
25 ENGLISH Display the Picture in Picture ( PIP ) Press the PIP ( ) button. There are 2 modes of PIP window : SMALL , LARGE Whenever you press this button, PIP window mode will be changed.
26 Display the Picture in Picture ( PIP ) Changing the PIP Size Press the ( ) button on the remote control. ■ The PIP will change among 2 dif ferent sizes whenever you press this button. 1 Swapping the Main & Sub-Picture Press the ( ) button on the remote control.
27 Changing the Picture Size ENGLISH Setup your Auto Aspect SET UP PREVIOUS EXIT ADJUST SELECT PIP LANGUAGE 4 : 3 AUTO ASPECT DIGIT AL VNR APPEARANCE BLUE BACK PC SET UP OFF OFF ON PREVIOUS EXIT ADJUST SELECT 4 : 3 AUT O ASPECT PREVIOUS EXIT ADJUST SELECT P ANORAMIC REGULAR 14 : 9 ZOOM Press the MENU ( ) button.
Noise & OSD Setting T eletext Functions 28 The T eletext page of most TV channels provide information such as TV programme times, News bulletins, Weather forecasts, T ravel information, or Sports results. Functions of the teletext Part Display Contents A Selected page number .
Displaying the T eletext Information 29 ENGLISH Select the channel providing the teletext service using the ( ) or ( ) button. Press the TEXT ( ) button to activate the teletext mode. The contents of page 250 are displayed. T o display the index page, press the INDEX ( ) button.
30 Connecting to the PC (DVI) T urn the PC on. Press the PC or ( ) button on the remote control to select the PC. Set up the PC software. (See page 31) Adjust the screen in PC Mode.
31 ENGLISH Setting the PC Software First, click on Settings on the Windows Start menu and click on " Control Panel ". Double click on the Display icon. Click on the Settings tab on the display dialog-box. Adjust the resolution up to 1366 x 768 pixels.
Standard Display Mode 32 If the signal from the system equals the standard signal mode, the screen will adjust automatically . If the signal from the system does not equal the standard signal, adjust the display mode as shown below referring to your video card instructions.
ENGLISH Pin Configuration 33 Pin Signal Assignment Pin Signal Assignment 1 T .M.D.S Data2- 2 T .M.D.S Data2+ 3 T .M.D.S Data2/4 Shield 4 T .M.D.S Data4- 5 T .M.D.S Data4+ 6 DDC Clock 7 DDC Data 8 No Connect 9 T .M.D.S Data1- 10 T .M.D.S Data1+ 1 1 T .
34 T roubleshooting No picture or sound. Screen is black. Picture is OK but there is no sound. Poor sound quality . No image on a specific channel. Image is not stable and may appear to vibrate , horizontal bars appear . No color on a specific channel (a black & white image).
35 ENGLISH T roubleshooting For Monitor "No signal" message "Out of range" message Picture rolls down vertically . A shadowed area appears on the screen. The image is too large or too small. Horizontal or vertical bars appear on the screen.
☛ ☛ Design and specifications are subject to change without notice. Size Display Size Pixel Pitch Pixel Number T ype Brightness Contrast Ratio Viewing Angle Colour System Sound System Video System Y / Pb / Pr Video Input Audio Input RGB Input Display Colour Max.
37 ENGLISH Specifications ☛ ☛ Design and specifications are subject to change without notice. Size Display Size Pixel Pitch Pixel Number T ype Brightness Contrast Ratio Viewing Angle Colour System Sound System Video System Y / Pb / Pr Video Input Audio Input RGB Input Display Colour Max.
38 Memo.
39 ENGLISH Memo.
P/N :.
Ein wichtiger Punkt beim Kauf des Geräts Daitsu LCD 32 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Daitsu LCD 32 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Daitsu LCD 32 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Daitsu LCD 32 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Daitsu LCD 32 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Daitsu LCD 32 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Daitsu LCD 32 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Daitsu LCD 32. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Daitsu LCD 32 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
