Benutzeranleitung / Produktwartung DAC-200 des Produzenten Daewoo
Zur Seite of 36
Owner’s Manual DAC-100 / DAC-200 /DAC-300 ENGLISH Digital-to-Analog Converter Box Digital-to-Analog Converter Box • Electronic Program Guide • Parental Control / Caption / T ext • English / Spanish / French support • Auto Clock Setting DA1S-GN1DAA-AN¿ 2007.
1 PRODUCT INFORMA TION I MPORT ANT S AFETY I NSTRUCTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
2 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3 PRODUCT INFORMA TION Important Safeguards ................................ 1 Contents ................................................... 3 Read Carefully Before Using ..................... 4 Identification of Controls .......................... 5 Remote Control .
Please read carefully before using this unit. Placement and handling • The picture and sound of a nearby TV, VCR, or radio may be distorted. In this case, position the unit away from the TV, VCR, or radio. • Do not use volatile liquids, such as insecticide spray, near the unit.
5 PRODUCT INFORMA TION Front Panel I DENTIFICA TION OF C ONTROLS Rear Panel Remote sensor Power indicator Connection to Antenna Connection to TV Power Adaptor Connect to wall outlet.
6 R EMOTE C ONTROL MUTE PR E -CH 1 2 3 4 5 6 7 8 9 - 0 P OW E R E N TE R E XI T ME N U V O L E P G I N F O CH- L I S T A U D I O C A P T I O N A S P E C T CH POWER : Switches the receiver on or off.
7 PRODUCT INFORMA TION Digital-to-Analog Converter Box Remocon Code Table R EMOTE C ONTROL Format : M50560 NO CUSTOM DA TA Function 1 E8H 00H 0 2 E8H 01H 1 3 E8H 02H 2 4 E8H 03H 3 5 E8H 04H 4 6 E8H 05.
8 V arious methods of connecting your TV Method 1 Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV. Plug this cable into the “ RF IN ” jack on the rear panel of the Converter Box. Connect the “ RF OUT ” jack on the Converter Box to the “ RF IN ” jack on the TV with another RF cable.
9 INST ALLA TION SETUP M ENU O VERVIEW Move Prev. CHANNEL √ OPTION √ LOCK √ Channel Scan Channel Add Channel Edit Manual Scan T ypical Menu Operation In this menu system, there are several ways to customize the menu settings provided.
10 Automatically finds all channels available through the ‘RF IN’ source. The unit stores all the active channels found, on the channel list. Inactive or weak channels may not appear on the list. In that case, add missing channels manually with the Manual Scan menu.
11 SETUP Automatically adds new channels available through the antenna input (RF IN) except memorized channels already in the channel list. 1 Press [MENU] to display the on-screen menu. 2 Select the SETUP menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level.
12 This feature manually adds or deletes channels. 1 Press [MENU] to display the on-screen menu. 2 Select the SETUP menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level. 3 Select the “Manual Scan” using [ …† ] then press [ENTER] or [ √ ] .
13 SETUP Enables the user to set up the clock information. Normally, your clock is set using signals transmitted by DTV stations. Choosing your time zone sets the current time automatically. 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level.
14 Selects the screen format. To view a picture with a wide (16:9) aspect ratio, you can choose Set By Program, Letter Box, Cropped, or Squeezed. 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level.
15 SETUP Select a language for the menus to appear in. 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level. 3 Select the Language option using [ …† ]. 4 Press [ √ ] or [ENTER] to move to the third level.
16 O PTION M ENU F EATURES Digital channels sometimes provide multiple audio tracks, often in a different language. You can set a default audio language with the Audio Language menu. 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level.
17 SETUP 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level. 3 Select the Caption Select option using [ …† ]. 4 Press [ √ ] or [ENTER] to move to the third level.
18 DCC (DTV Captions) Selects a default Caption language. Off DTV Caption is not displayed. Custom Set DTV Captions by user Standard Set DTV Captions by program Notes • DTV Caption (Standard EIA /CEA 708) will appear only if provided by the broadcaster.
19 SETUP 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level. 3 Select the DCC V iew option using [ …† ]. 4 Press [ √ ] or [ENTER] to move to the third level.
20 Edge Type Selects the edge type for captions. None: The text has no edge. Uniform: The text has a uniform edge. Raised: The text is raised. Depressed: The text is depressed. Left Shadow: The text has a left-shadow edge. Right Shadow: The text has a right-shadow edge.
21 SETUP Use this option to change the Converter Box’s output channel. The default is channel 4. 1 Press [MENU] to display the on-screen menu. 2 Select the OPTION menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level. 3 Select the Output Channel option using [ …† ].
22 Allows you to set up specific channels and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the LOCK menus. If the Lock System is set to Off, the Channel and Program Ratings are not functional.
23 SETUP Blocks any channel that you do not want to view or that you do not want your children to watch. If you tune in a blocked channel, a black screen with a pop-up box will appear. Block Ch can override Channel Edit menu settings (see page 20). 1 Press [MENU] to display the on-screen menu.
24 Prevents children from watching certain children’s TV programs according to the ratings limit set. This rating applies only to TV programs for children. Unless you block TV programs intended for mature audiences in the TV Rating – General menu, your children could view those programs.
25 SETUP 7 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing. Blocks TV programs that you or your family may not wish to watch, based on the rating scheme set. 1 Press [MENU] to display the on-screen menu.
26 Most parents would find this program suitable for all ages. Although this rating does not signify a program designed specifically for children, most parents may let younger children watch this program unattended. It contains little or no violence, no strong language and little or no sexual dialogue or situations.
27 SETUP Blocks movies according to the movie ratings restrictions so children cannot view certain movies. You can set the ratings to block out all the movies with ratings above a specified level. Keep in mind that the movie ratings apply only to movies shown on TV, not TV programs such as soap operas.
28 content will initially require at least a PG-13 rating. In effect, the PG-13 cautions parents with more stringency than usual to give special attention to this film before they allow their 12-year olds and younger to see it. PG-13 places larger responsibilities on parents for their children’s movie viewing.
29 SETUP You can block TV program with downloadable region rating table. 1 Press [MENU] to display the on-screen menu. 2 Select the LOCK menu using [ …† ] then press [ENTER] or [ √ ] to move to the second level.
30 The Channel Banner appears whenever you tune to a new channel or press the [ENTER] button on the Remote Control while viewing a program. 1 Press [ENTER] while watching a program. The Channel Banner appears on the TV screen (Channel number, audio, station name, and current time).
31 BASIC OPERA TION Program Infor mation Display The Program Information Display appears if you press the [INFO] button on the Remote Control while viewing a program. 1 Press [INFO] while watching a program. Program Information appears on the TV screen.
32 The Program and Station Guide contains schedule and program information for all channels. They also provide local over-the-air channels information including conventional digital channels. Use the Program and Station Guide to find programs easily and conveniently and to view schedule and descriptive program information for the channels.
33 BASIC OPERA TION N ORMAL O PERA TION You can select channels as described below. Number and – (dash) buttons (on the Remote Control) Use Number (0-9) and – (dash) buttons to select a channel directly.
34 T elevision System Fully A TSC Compliant Channel Coverage T errestrial : 2 ~ 69 A TSC RF input RF IN (1) RF Output 3 / 4 Channel V ideo Output 480i Composite Audio Output Analog Audio (L/ R) Dimension (DAC-100) 180 x 150 x 30 (mm 3 ) W eight (DAC-100) ~290 g Power Requirements AC 120V , 60Hz Power Consumption In standby : 1.
Model : DAC-100/DAC-200/DAC-300 The CSA US mark indicates that a product meets applicable U.S.standards, including those from ANSI, ASME, ASSE, ASTM, NSF, CSA America and UL.
Ein wichtiger Punkt beim Kauf des Geräts Daewoo DAC-200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Daewoo DAC-200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Daewoo DAC-200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Daewoo DAC-200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Daewoo DAC-200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Daewoo DAC-200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Daewoo DAC-200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Daewoo DAC-200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Daewoo DAC-200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
