Benutzeranleitung / Produktwartung DWL-2600AP des Produzenten D-Link
Zur Seite of 128
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 March 2012.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 2 March 2012 T able of Contents Section 1 - About This Document .........................................................................................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 3 March 2012 Controlling Access by MAC Authentication ...................................................................................................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 4 March 2012 Viewing the Last Proposed Set of Changes ................................................................................................ 109 Conguring Advanced Settings .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 5 March 2012 List of Figures Figure 1 - Administrator UI Online Help ....................................................................................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 6 March 2012 Figure 60 - Congure Client QoS DiffServ Class Map Settings ..............................................................................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 7 March 2012 List of T ables T able 1 - T ypographical Conventions ......................................................................................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 8 March 2012 T able 60 - Session Management ............................................................................................ ................
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 9 March 2012 Section 1 - About This Document Section 1 - About This Document This guide describes setup, conguration, administration and maintenance for the D-Link DWL-x600AP Unied Access Point (UAP) on a wireless network.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 10 March 2012 Section 1 - About This Document Symbol Example Description Curly Braces {} {Choice1 | Choice2} Indicates that you must select a parameter from the list of choices.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 1 March 2012 Section 2 - Getting Started Section 2 - Getting Started The D-Link DWL-x600AP unied access point (UAP) provides continuous, high-speed access between wireless devices and Ethernet devices.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 12 March 2012 Section 2 - Getting Started Required Software or Component Description Wireless Connecti.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 13 March 2012 Section 2 - Getting Started Dynamic and Static IP Addressing on the AP When you power on the access point, the built-in DHCP client searches for a DHCP server on the network in order to obtain an IP Address and other network information.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 14 March 2012 Section 2 - Getting Started •) T o use a direct-cable connection, connect one end of a.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 15 March 2012 Section 2 - Getting Started Figure 3 - Provide Basic Settings 5.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 16 March 2012 Section 2 - Getting Started Basic Settings From the Basic Settings page, you can view various information about the UAP , including IP and MAC address information, and congure the administrator password for the UAP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 17 March 2012 Section 2 - Getting Started Field Description System Contact Enter the name, e-mail address, or phone number of the person to contact regarding issues related to the AP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 18 March 2012 Section 2 - Getting Started Figure 4 - Command Line Interface (CLI) Connection Conguring the Ethernet Settings The default Ethernet settings, which include DHCP and VLAN information, might not work for all networks.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 19 March 2012 Section 2 - Getting Started Action Commands Use DHCP as the connection type set manageme.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 20 March 2012 Section 2 - Getting Started Using the CLI to Congure 802.1X Authentication Information The following table shows the commands used to congure the 802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 21 March 2012 Section 2 - Getting Started Conguring Security on the Wireless Access Point Y ou congure secure wireless client access by conguring security for each virtual access point (V AP) that you enable.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 22 March 2012 Section 3 - Viewing Access Point Status Section 3 - V iewing Access Point Status This section describes the information you can view from the tabs under the Status heading on the Administration Web UI.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 23 March 2012 Section 3 - Viewing Access Point Status Modify Wireless Settings page. For information about conguring these settings, see “Wireless Settings” on page 37 and “Modifying Radio Settings” on page 40.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 24 March 2012 Section 3 - Viewing Access Point Status Field Description Persistence Choose Enabled to save system logs to non-volatile memory so that the logs are not erased when the AP reboots.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 25 March 2012 Section 3 - Viewing Access Point Status Note: T o apply your changes, click Apply . Changing some settings might cause the AP to stop and restart system processes.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 26 March 2012 Section 3 - Viewing Access Point Status Field Description T otal Drop Packets Indicates total number of packets sent (in T ransmit table) or received (in Received table) by this AP that were dropped.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 27 March 2012 Section 3 - Viewing Access Point Status A TSPEC is a trafc specication that is sent from a QoS-capable wireless client to an AP requesting a certain amount of network access for the trafc stream (TS) it represents.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 28 March 2012 Section 3 - Viewing Access Point Status Field Description From Station Shows the number of packets and bytes received from the wireless client and the number of packets and bytes that were dropped after being received.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 29 March 2012 Section 3 - Viewing Access Point Status Field Description AP Detection for Radio T o allow the AP radios to perform neighbor AP detection and collect information about neighbor APs, click Enabled .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 30 March 2012 Section 3 - Viewing Access Point Status Field Description Known AP List Action An AP can.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 31 March 2012 Section 3 - Viewing Access Point Status appear in the Known AP List. V iewing Managed AP DHCP Information The UAP can learn about D-Link Unied Wireless Switches on the network through DHCP responses to its initial DHCP request.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 32 March 2012 Section 3 - Viewing Access Point Status Field Description AP and V AP Status Interface Indicates the name of the Radio or V AP interface.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 33 March 2012 Section 3 - Viewing Access Point Status Field Description TSPEC Statistics Summary for V oice ACM Indicates the total number of accepted and the total number of rejected voice T rafc Streams.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 34 March 2012 Section 3 - Viewing Access Point Status Field Description Multicast Frames T ransmitted Count of successfully transmitted MSDU frames where the multicast bit is set in the destination MAC address.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 35 March 2012 Section 4 - Managing the Access Point Section 4 - Managing the Access Point This section.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 36 March 2012 Section 4 - Managing the Access Point Field Description Hostname Enter a hostname for the AP . The hostname appears in the CLI prompt. •) The hostname has the following requirements: •) The length must be between 1 – 63 characters.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 37 March 2012 Section 4 - Managing the Access Point Wireless Settings Wireless settings describe aspects of the local area network (LAN) related specically to the radio device in the access point (802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 38 March 2012 Section 4 - Managing the Access Point Field Description Mode The Mode denes the Physical Layer (PHY) standard the radio uses. Note: The modes available depend on the country code setting and the radio selected.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 39 March 2012 Section 4 - Managing the Access Point Field Description AeroScout™ Engine Protocol Support AeroScout Engine support provides location-based services for wireless networks.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 40 March 2012 Section 4 - Managing the Access Point information. The DWS-4000 Series switch does not communicate with the AE. AeroScout tags operate only in 802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 41 March 2012 Section 4 - Managing the Access Point Field Description Mode The Mode denes the Physical Layer (PHY) standard the radio uses. Note: The modes available depend on the country code setting and the radio selected.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 42 March 2012 Section 4 - Managing the Access Point Field Description Short Guard Interval Supported This eld is available only if the selected radio mode includes 802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 43 March 2012 Section 4 - Managing the Access Point Field Description RTS Threshold Specify a Request to Send (RTS) Threshold value between 0 and 2347.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 44 March 2012 Section 4 - Managing the Access Point Field Description TSPEC V oice ACM Limit Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless medium using a voice AC to gain access.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 45 March 2012 Section 4 - Managing the Access Point Figure 19 - Scheduler Conguration Field Description Global Scheduler Mode A global switch to enable or disable the scheduler feature.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 46 March 2012 Section 4 - Managing the Access Point Figure 20 - Scheduler Conguration (Modify Rule) Click Apply to save the new conguration settings.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 47 March 2012 Section 4 - Managing the Access Point Field Description Radio Scheduler Prole Operational Status 1 or 2 From the menu, select the Scheduler prole to associate with Radio 1 or Radio 2.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 48 March 2012 Section 4 - Managing the Access Point Figure 22 - Modify Virtual Access Point Settings The following table describes the elds and conguration options on the VA P page.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 49 March 2012 Section 4 - Managing the Access Point Field Description Radio Select the radio to congure. V APs are congured independently on each radio.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 50 March 2012 Section 4 - Managing the Access Point Field Description Redirect Mode Enable the HTTP redirect feature to redirect wireless clients to a custom W eb page.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 51 March 2012 Section 4 - Managing the Access Point Field Description Key T ype Select the key type by clicking one of the radio buttons: •) ASCII •) Hex WEP Keys Y ou can specify up to four WEP keys.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 52 March 2012 Section 4 - Managing the Access Point called EAP Encapsulation Over LANs (EAPOL). IEEE 802.1X provides dynamically-generated keys that are periodically refreshed.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 53 March 2012 Section 4 - Managing the Access Point Field Description Enable RADIUS Accounting Select this option to track and measure the resources a particular user has consumed such as system time, amount of data transmitted and received, and so on.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 54 March 2012 Section 4 - Managing the Access Point Field Description Cipher Suites Select the cipher suite you want to use: •) TKIP •) CCMP (AES) •) TKIP and CCMP (AES) Both TKIP and AES clients can associate with the AP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 55 March 2012 Section 4 - Managing the Access Point Field Description Enable pre- authentication If for WP A V ersions you select only WP A2 or both WP A and WP A2, you can enable pre- authentication for WP A2 clients.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 56 March 2012 Section 4 - Managing the Access Point Field Description Session Key Refresh Rate Enter a value to set the interval at which the AP will refresh session (unicast) keys for each client associated to the V AP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 57 March 2012 Section 4 - Managing the Access Point Figure 27 - Congure WDS Bridges Before you con.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 58 March 2012 Section 4 - Managing the Access Point If you select None as your preferred WDS encryption option, you will not be asked to ll in any more elds on the WDS page.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 59 March 2012 Section 4 - Managing the Access Point Controlling Access by MAC Authentication A Media Access Control (MAC) address is a hardware address that uniquely identies each node of a network.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 60 March 2012 Section 4 - Managing the Access Point Field Description Filter T o set the MAC Address Filter , select one of the following options: •) Allow only stations in the list .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 61 March 2012 Section 4 - Managing the Access Point Field Description Load Balancing Enable or disable load balancing: T o enable load balancing on this AP , click Enable .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 62 March 2012 Section 4 - Managing the Access Point Conguring Managed Access Point Settings T o add.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 63 March 2012 Section 4 - Managing the Access Point Conguring 802.1X Authentication On networks that use IEEE 802.1X, port-based network access control, a supplicant (client) cannot gain access to the network until the 802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 64 March 2012 Section 4 - Managing the Access Point Creating a Management Access Control List (ACL) Y .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 65 March 2012 Section 5 - Conguring Access Point Services Section 5 - Conguring Access Point Ser.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 66 March 2012 Section 5 - Conguring Access Point Services Field Description Generate HTTP SSL Certicate Select this option to generate a new SSL certicate for the secure Web server .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 67 March 2012 Section 5 - Conguring Access Point Services Figure 34 - SNMP Conguration Field Description SNMP Enabled/ Disabled Y ou can specify the SNMP administrative mode on your network.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 68 March 2012 Section 5 - Conguring Access Point Services Field Description Hostname, address or su.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 69 March 2012 Section 5 - Conguring Access Point Services Field Description SSH Status Choose to either enable or disable SSH access to the AP CLI: •) T o permit remote access to the AP by using SSH, click Enabled .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 70 March 2012 Section 5 - Conguring Access Point Services Figure 37 - Modify QoS Queue Parameters Field Description EDCA T emplate Possible options are: Default , Optimized for V oice, and Custom .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 71 March 2012 Section 5 - Conguring Access Point Services Field Description Max. Burst Length The Max. Burst Length is an AP EDCA parameter and only applies to trafc owing from the AP to the client station.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 72 March 2012 Section 5 - Conguring Access Point Services Note: After you congure the QoS settings, you must click Apply to apply the changes and to save the settings.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 73 March 2012 Section 5 - Conguring Access Point Services Field Description Non Urgent Severity Congures the severity level for log messages that are considered to be non-urgent.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 74 March 2012 Section 5 - Conguring Access Point Services T o set the system time either manually o.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 75 March 2012 Section 6 - Conguring SNMPv3 Section 6 - Conguring SNMPv3 This section describes h.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 76 March 2012 Section 6 - Conguring SNMPv3 Note: After you congure the SNMPv3 Views settings, you must click Apply to apply the changes and to save the settings.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 77 March 2012 Section 6 - Conguring SNMPv3 Field Description Read Views Select the read access to management objects (MIBs) for the group: •) view-all — The group is allowed to view and read all MIBs.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 78 March 2012 Section 6 - Conguring SNMPv3 Note: After you congure the SNMPv3 Users settings, you must click Apply to apply the changes and to save the settings.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 79 March 2012 Section 7 - Maintaining the Access Point Section 7 - Maintaining the Access Point This section describes how to maintain the UAP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 80 March 2012 Section 7 - Maintaining the Access Point Figure 46 - Conrmation Prompt 3.) T o proceed with the download, select OK . A dialog box opens allowing you to view or save the le.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 81 March 2012 Section 7 - Maintaining the Access Point 2.) Use the Browse button to select the le to restore. 3.) Click the Restore button. A File Upload or Choose File dialog box displays.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 82 March 2012 Section 7 - Maintaining the Access Point Figure 50 - Manage Firmware (TFTP) 2.) Enter a name (1 to 63 characters) for the image le in the Image Filename eld, including the path to the directory that contains the image to upload.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 83 March 2012 Section 7 - Maintaining the Access Point 5.) T o verify that the rmware upgrade completed successfully , check the rmware version shown on the Upgrade page (or the Basic Settings page).
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 84 March 2012 Section 7 - Maintaining the Access Point Figure 53 - Packet Capture Status The following table describes information the packet capture status elds display .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 85 March 2012 Section 7 - Maintaining the Access Point Upon activation, the packet capture proceeds until one of the following occurs: •) The capture time reaches congured duration.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 86 March 2012 Section 7 - Maintaining the Access Point T o capture packets on the Ethernet interface of the AP and V AP0 on radio 1 using IP port 58000, start two Wireshark sessions and specify the following interfaces: rpcap://192.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 87 March 2012 Section 7 - Maintaining the Access Point Field Description Remote Capture Port Specify the remote port to use as the destination for packet captures.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 88 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Section 8 - Conguring Client Quality of Service (QoS) This section describes how to congure QoS settings that affect trafc from the wireless clients to the AP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 89 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description Client QoS Mode Enable or disable QoS operation on the V AP selected in the V AP menu.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 90 March 2012 Section 8 - Conguring Client Quality of Service (QoS) MAC ACLs MAC ACLs are Layer 2 ACLs.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 91 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description ACL T ype Sel.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 92 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description Source Port Select this eld to include a source port in the match condition for the rule.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 93 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description IP Precedence Select this option and enter a value to use the packet’s IP Precedence value in the IP header as match criteria.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 94 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description Source Port Select this option to include a source port in the match condition for the rule.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 95 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description EtherT ype Select the EtherT ype eld to compare the match criteria against the value in the header of an Ethernet frame.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 96 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Dening DiffServ T o use Diff.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 97 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description Class Map Name Select name of the class to congure. Use the elds in the Match Criteria Conguration area to match packets to a class.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 98 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description IP DSCP T o use IP DSCP as a match criteria, select the check box and select a DSCP value keyword or enter a DSCP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 99 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description EtherT ype Select the EtherT ype eld to compare the match criteria against the value in the header of an Ethernet frame.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 100 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Creating a DiffServ Policy Map Use the Policy Map page to create DiffServ policies and to associate a collection of classes with one or more policy statements.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 101 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description Drop Select Drop to specify that all packets for the associated trafc stream are to be dropped if the class map criteria is met.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 102 March 2012 Section 8 - Conguring Client Quality of Service (QoS) Field Description ACL T ype Up.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 103 March 2012 Section 8 - Conguring Client Quality of Service (QoS) RADIUS Attribute ID Description T ype/Range V endor-Specic (26), L VL7-Wireless-Client- ACL-Up 6132,121 Access list identier to be applied to 802.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 104 March 2012 Section 9 - Clustering Multiple APs Section 9 - Clustering Multiple APs The UAP supports AP clusters.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 105 March 2012 Section 9 - Clustering Multiple APs Figure 64 - Manage Access Points In The Cluster (Active) If clustering is currently disabled on the AP , the Start Clustering button is visible.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 106 March 2012 Section 9 - Clustering Multiple APs Removing an Access Point from the Cluster T o remove an access point from the cluster , do the following.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 107 March 2012 Section 9 - Clustering Multiple APs A session in this context is the period of time in which a user on a client device (station) with a unique MAC address maintains a connection with the wireless network.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 108 March 2012 Section 9 - Clustering Multiple APs Conguring and V iewing Channel Management Settings When Channel Management is enabled, the UAP automatically assigns radio channels used by clustered access points.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 109 March 2012 Section 9 - Clustering Multiple APs V iewing Current Channel Assignments and Setting Locks The Current Channel Assignments section shows a list of all access points in the cluster by IP Address.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 10 March 2012 Section 9 - Clustering Multiple APs Field Description Change channels if interference is reduced by at least Specify the minimum percentage of interference reduction a proposed plan must achieve in order to be applied.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 1 1 March 2012 Section 9 - Clustering Multiple APs Figure 67 - View Neighboring Access Points The following table describes details about the Wireless Neighborhood information.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 12 March 2012 Section 9 - Clustering Multiple APs V iewing Details for a Cluster Member T o view details on a cluster member AP , click on the IP address of a cluster member at the top of the page.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 13 March 2012 Appendix A - Default AP Settings Appendix A - Default AP Settings When you rst power on a UAP , it has the default settings shown in the following table.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 14 March 2012 Appendix A - Default AP Settings Feature Default VLAN ID 1 Network Name (SSID) dlink1 through dlink16 Broadcast SSID Allow Security Mode None (plain text) MAC Authentication T ype None RADIUS IP Address 10.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 15 March 2012 Appendix B - Conguration Examples Appendix B - Conguration Examples This appendix contains examples of how to congure selected features available on the UAP .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 16 March 2012 Appendix B - Conguration Examples set vap vap1 vlan-id 2 Note: The previous command sets the VLAN ID to 2 for V AP 1 on both radios.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 17 March 2012 Appendix B - Conguration Examples Radio Conguration from the W eb Interface 1.) Log onto the AP and navigate to the Manage > Radio page.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 18 March 2012 Appendix B - Conguration Examples Radio Conguration Using SNMP 1.) Load the DLINK-WLAN-ACCESS-POINT -X600-MIB module. 2.) From the MIB tree, navigate to the objects in the apRadio table (apRadioBss > apRadioT able).
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 1 19 March 2012 Appendix B - Conguration Examples WDS Conguration from the CLI 1.) Connect to the MyAP1 by using T elnet, SSH, or a serial connection.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 120 March 2012 Appendix B - Conguration Examples 5.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 121 March 2012 Appendix B - Conguration Examples Conguring Client QoS This example shows how to .
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 122 March 2012 Appendix B - Conguration Examples •) Wild Card Mask : 0.0.0.255 •) Source Port : Select the option •) Select From List (Source Port) : www 7.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 123 March 2012 Appendix B - Conguration Examples 1.) Log onto the AP and navigate to the Client QoS > Class Map page. Figure 78 - Conguring QoS by Using the Web Interface (Class Map Name) 2.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 124 March 2012 Appendix B - Conguration Examples Figure 81 - Congure Client QoS DiffServ Policy Map Settings (Rule) 10.) For the class_voip Class Map , select the Mark IP Dscp option, and then select ef from the Select From List menu.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 125 March 2012 Appendix B - Conguration Examples 4.) Add another rule to acl1 that allows all trafc from the host with an IP address of 192.168.1.23.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 126 March 2012 Appendix B - Conguration Examples •) Use 1.3.6.1.4.1.171.10.128.1.1.26.10.3.1.16.1.4.97.99.108.49.2 to set apQosAclRuleCommit to a value of 1 (true), which saves the rule.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 127 March 2012 Appendix C - Statements Appendix C - Statements Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules.
Unied Access Point Administrator ’s Guide Unied Access Point Administrator’s Guide Page 128 March 2012 Appendix C - Statements NCC Statement: 經型式認證合格之低功率射頻電機，.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DWL-2600AP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DWL-2600AP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DWL-2600AP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DWL-2600AP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DWL-2600AP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DWL-2600AP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DWL-2600AP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DWL-2600AP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DWL-2600AP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
