Benutzeranleitung / Produktwartung DSC-6620 des Produzenten D-Link
Zur Seite of 143
.
2 DCS-6620 User’ s Manual D-Link Systems, Inc. T able of Contents Contents of P ackage ....................................................................................... 3 Minimum System Requirements ............................................
3 DCS-6620 User’ s Manual D-Link Systems, Inc. Package Contents D-Link SECURICAM DCS-6620 PTZ Inter net Camera Remote Control 12V A C P ower Adapter A/V Cables Categor y 5 Ether .
4 DCS-6620 User’ s Manual D-Link Systems, Inc. Introduction The D-Link SECURIC AM Netw or k DCS- 6620 PTZ (P an, Til t, and Zoo m) Inte r net Camer a is a full f eat ured surve illan ce syste m that.
5 DCS-6620 User’ s Manual D-Link Systems, Inc. Features & Benefits A/V Output The SECURICAM Networ k DCS-6620 comes with an A/V output allowing you to connect to your TV f or local viewing. The DCS-6620 can also be connected directly to your VCR to record activities.
6 DCS-6620 User’ s Manual D-Link Systems, Inc. Connections Connections Ethernet 10/100 RJ45 socket The DCS-6620 bac k panel f eatures an RJ-45 connector f or connections to 10Base-T Ethernet cabling or 100Base-TX F ast Ether net cabling.
7 DCS-6620 User’ s Manual D-Link Systems, Inc. Connections Located on the bottom panel of the DCS-6620 , the sock et is used to connect the camera stand to the PTZ Inter net Camera b y attaching the scre w head on the camera stand to the PTZ Internet Camera.
8 DCS-6620 User’ s Manual D-Link Systems, Inc. Connections Included with the DCS-6620 is an infrared remote control. Y ou hav e the option of controlling the camera via the P an/Tilt/Zoom Controls using the IP sur veillance software, Internet Explorer , or via the infrared remote.
9 DCS-6620 User’ s Manual D-Link Systems, Inc. Hardware Installation Hardware Installation Connect an Ethernet cable Connect an Ether net cab le to the network cable connector located on the DCS-6620’ s bac k panel and attach it to the network.
10 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Installation Wizard After you hav e successfully completed the hardware installation of the DCS-6620 PTZ Inter net Camera, it is necessar y to install software to configure and operate the camera.
11 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Click Install Wizard Please wait while the InstallShield Wizard prepares to install.
12 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard The InstallShield will install in the follo wing f older . T o install into a diff erent f older , clic k Bro wse and select another f older . Click Next Select the Program f older that Setup will add program icons to .
13 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Installation is now complete . IMPORT ANT : A hardware reset of the PTZ Internet Camera ma y be required if the Installation Wizard cannot find the camera.
14 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard The Installation Wizard will now show a MA C address for the DCS-6620 and an IP address . This IP address ma y not be correct at this step in the installation until you see “Y es” under the assigned column.
15 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Screen Installation Wizard Screen The follo wing options are av ailable on the Installation Wizard screen by clicking on the corresponding tab: Search: Click to search f or any av ailable cameras to connect to the network.
16 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Screen Network Settings: He re use rs ca n co nfi gu re th e Ne tw ork Settings for the camera. Enter the IP ad dre ss , Sub ne t ma sk, Def au lt rou ter IP , Pr imar y DNS, and Secondar y DNS.
17 DCS-6620 User’ s Manual D-Link Systems, Inc. Installation Wizard Screen Reset to Default About Exit Click the Exit tab to e xit the Installation Wizard screen. Click About to displa y the current version and date of the Installation Wizard. Click the Reset to Def ault tab to reset the camera’ s settings to factory defaults .
18 DCS-6620 User’ s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Enabling UPnP for Windows ® XP UPnP TM is shor t f or Univ ersal Plug and Pla y , which is a networking architecture that provides comp atib ilit y among net worki ng equip ment , softw are, and peripher als .
19 DCS-6620 User’ s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Click Add/Remove Windows Components The f ollowing screen will appear: Select Networking Services Click Details Sel.
20 DCS-6620 User’ s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Please wait while Setup configures the components. Click Next Click Finish.
21 DCS-6620 User’ s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Click My Network Places T o view your DCS-6620 PTZ Inter net Camera in an Internet browser , go to y our Desktop and click My Network Places .
22 DCS-6620 User’ s Manual D-Link Systems, Inc. Installing IP surveillance Software Click Next Real-time Monitoring Video and A udio Recording to hard disk High quality video High compression ratio .
23 DCS-6620 User’ s Manual D-Link Systems, Inc. Installing IP surveillance Software Please read the Software Licensing Agreement and click yes if you wish to accept the agreement. Click “No” to exit the installation. Enter your name and compan y inf ormation and then click “Ne xt”.
24 DCS-6620 User’ s Manual D-Link Systems, Inc. Installing IP surveillance Software Click Next Select the destinat ion director y . Click Next Select the program f older the software will be installed into .
25 DCS-6620 User’ s Manual D-Link Systems, Inc. Installing IP surveillance Software The installation is complete. Click Finish Click Next.
26 DCS-6620 User’ s Manual D-Link Systems, Inc. T esting the DCS-6620 The window in the center of your browser is the camera image window . Y ou should now see a video image and hear the audio ov er y our computer speak ers from the DCS-6620 . If you are having prob lems please consult the FAQ section of this man ual (page 126).
27 DCS-6620 User’ s Manual D-Link Systems, Inc. Security When the PTZ Inter net Camera is used f or the first time, it is highly recommended that the Administrator set the Administrator Password to constrain user access to the PTZ Inter net Camera since the Def ault settings are Null String (no pass word).
28 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router D-Link ’ s DCS-6620 is a versat ile and cost eff ectiv e PTZ Internet Came ra off ering both video and audio monitor ing. It can also ser v e as a pow erful sur veillance system in secur ity applications.
29 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router View the PTZ Internet Camera using your Internet Explorer Web browser Viewing the Video on the browser to test the connection Click on the Configuration b utton on the left side of the display .
30 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router Router Set-Up and Installation The f ollowing steps generally apply to any router that y ou hav e on your network. The D-Link DI-624 is used as an e xample to clarify the configurat ion process.
31 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router Determine Y our Router’ s IP Address (W AN) Note: Because a dynamic W AN IP can change from time to time depending on y our ISP , you may want to obtain a Static IP address from your ISP .
32 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router Important: Some ISPs bloc k access to por t 80. Be sure to check with y our ISP so that you can open the appropriate por ts accordingly . Some ISPs bloc k traffic on commonly used por ts to conser v e bandwidth.
33 DCS-6620 User’ s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620 with a Router Viewing Y our Camera After all settings hav e been entered correctly , a PC user inside or outside your network will hav e access to the camera through the Internet Explorer Web browser .
34 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Open your Inter net Explorer Web browser and enter the IP address for your PTZ Inter net Camera. An example address is 192.168.0.120, b ut your address ma y differ .
35 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Home Page Screen The image from the DCS-6620 should be visib le from the Home page on you r computer monitor . T o the r ight of the image are controls that allow you to pan and tilt the camera.
36 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Home Page Screen (continued) The image from the DCS-6620 should be visible from the Home page on your computer monitor . Click on the Client Settings b utton to change settings related to the connection.
37 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Home > Client Settings Click the Home tab to return to the DCS-6620 Home page. Protocol Options Th e UD P P ro to col sh o ul d b e c ho sen f or mos t us er s.
38 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Home > Configuration Click on the Configur ation button on the Home page: There are 5 tabs across the top of the Configuration screen. F rom each tab , diff erent elements of the DCS-6620 can be configured.
39 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced > Network Reset IP Address at next boot Once the DCS-6620 is configured, this bo x should be unchec ked at all times.
40 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced > Network (continued) The e-mail address of recipients f or the secondar y ser v er . The retur n e-mail address to use if the snapshot or system log e-mail f ails to send.
41 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced > Network (continued) Granted user name on the bac kup FTP ser v er . Granted pass word on the backup FTP server . Granted f older on the backup FTP ser v er .
42 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Click the DDNS & UPnP b utton from the Configuration screen to access DDNS & UPnP settings.
43 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Enable DDNS: Click to enab le the DDNS function. Provider: Select your Dynamic DNS pro vider from the pull down men u. Host name: Enter the host name of the DDNS ser v er .
44 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Click the Video b utton from the Configuration screen to access video settings that aff ect how the video image appears.
45 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced > Video (continued) Key frame interval: Video quality control: V er tically rotate the video.
46 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Click the Audio/Video button from the Configuration screen to access video settings that aff ect how the video image appears .
47 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Recommendations for setting video for the best performance: “Best performance” means the image refresh rate should be the fast est possib le and the video quality should be the best possible at the lowest network bandwidth possib le.
48 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Recording settings to compromise between real-time and clear images If y ou hav e a broadband network, set Fix quality to Good image quality , or higher , instead of setting the Bit rate .
49 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Y ou may press to fine-tune the image and see what eff ect the setting will hav e on the image. When the image is acceptable, press to store the image settings, or to recall the or iginal settings.
50 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced > Motion Detection Click the Motion Detection b utton from the Configurat.
51 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced >Motion Detection (continued) Click to add a new window . A maximum of three motion windows can be opened simultaneously . Use your mouse to drag the window frame to resize or the title bar to mov e.
52 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > Advanced >Camera Control Click the Camera Control button from the Configuration screen to access settings that aff ect how the DCS-6620 PTZ Inter net Camera can pan and mo v e to preset locations.
53 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Click Apply to mak e changes eff ectiv e Configuration > Advanced >Camera Control (continued) Current Position: Enter a name f or the position at which you would like to preset the DCS-6620 .
54 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > T ools > Admin Click on the T ools tab to access 4 utility screens f or controlling and administer ing the DCS-6620 . The default screen in T ools is the Admin screen.
55 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser This option allows a user to connect to a camera with view -only privileges. User name is “ demo ”. No pass word is required. This is useful for demonstrations and keeps guests separate from users with accounts.
56 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > T ools > System (continued) Adjust the date and time according to what is entered by the administrator . Notice the f or mat in the related field while typing.
57 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > T ools > Applications Click on the Applications b utton to access the Applications settings from the T ools menu.
58 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > T ools > Applications (continued) Select the weekdays that should perf or m the follo wing operations: Sets the time to stop the operations .
59 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Any upload action specified in the options abov e will use the method chosen here. The captured snapshot named “video .jpg” will be attached in the e-mail with subject “P er iodic snapshots.
60 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Configuration > T ools > Default Click on the Default b utton to access the factory setting restoration and camera calibration options from the T ools menu.
61 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser The De vice Inf o screen lists the f ollowing impor tant settings that are currently set f or the DCS-6620.
62 DCS-6620 User’ s Manual D-Link Systems, Inc. Using the DCS-6620 with an Internet Browser Click on the Help tab to access descriptions of the par ticular function y ou need help with. The help screen is organized in the order of the tabs and then each men u item under that tab .
63 DCS-6620 User’ s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection Administrators can combine options on the application page to perf or m many useful security tasks. There are two trigger sources a vailab le: from an e xternal sensor or with b uilt-in motion detection.
64 DCS-6620 User’ s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection 1 2 123.123.123.1 3 John Smith 4 5 Snapshot 6 Ne xt, click the Network button under the Advanced tab to set the FTP ser ver settings f or the DCS-6620 .
65 DCS-6620 User’ s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection 1st FTP password: Specify the pass word to access the external FTP ser v er (e x. 12345). 1st FTP remote folder: Specify the destination folder in the e xternal FTP ser ver (e x.
66 DCS-6620 User’ s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection Ne xt, click the Applications button under the T ools tab to set the application settings for the DCS-6620 .
67 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Using IP sur veillance Software Installing the IP sur veillance Software Bef ore you begin installing this application software , the hardware system requirements must be check ed first.
68 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software The “License Agreement” window below will appear . Please read the f ollowing license agreement carefully . Click “Y es” to accept this agreement and proceed with the installation.
69 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Ne xt, the “User information” window below will appear . This window will prompt y ou to enter the user name and company name. Enter your user name and compan y name and then clic k “Ne xt” to continue.
70 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Select the installation director y f or this application software and click “Ne xt”, which is shown in the figure below .
71 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software After checking all the setup information in the window shown below , click “Ne xt” to star t the installation of the application software . Click Next Click Finish Click “Finish”, in the window shown below , to finish installation.
72 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Launcher Launcher is a controller program that allo ws users to in vok e Monitor or Playbac k quickly . System T ray Icon The Launcher icon reflects current state of IP sur veillance.
73 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software When Launcher is lock ed, the unloc k window will appear , prompting f or the user pass word in order to unlock. The input area of the dialog will be gra yed (disabled) f or 60 seconds after 3 consecutive f ailures.
74 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Exit Exi ts Laun che r . If user s cho ose this opt ion , Lau nch er will sho w a me ssa ge bo x pr omp tin g to confir m if users really want to exit, and warn users that exiting Launcher will also close Monitor and Pla yback.
75 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program Features of the Monitor T ool T raditional Sur veillance Features: Real-time monitoring Recording P an .
76 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Application Layout and Functionalities This section demonstrates a global view of the monitor tool, shown below . The components of the monitor tool will be introduced in detail in the f ollowing sections .
77 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Layout area Y ou can chan ge the moni toring la yo ut in this area. There are six kind s of la y outs : 1, 4, 6, 9, 13, or 16 video displa y frames in the video area.
78 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software The Admin Privilege In the monitor tool system, the admin pr ivilege has the right to access the DCS-6620 PTZ Inter net Camera through this application software and change the local settings as well.
79 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software The Layout of the Configuration This section discusses the local settings for the connection and the functional configuration of each camera.
80 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Insert – T o inser t a remote PTZ Inter net Camera to the camera list. Clic k the “Inser t” button, an “Inser t New Channel” dialog will popup , as shown below .
81 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Delet e – Remov es the select ed PTZ Internet Came ra from the camera list. Highl ight the camera that you w ant to delete from the list and clic k on the “Delete” b utton.
82 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Alert Settings: Specific aler t actions can be performed by setting the options in this windo w . Enable motion detect This will trigger an aler t sound that has been specified in the section titled “Global Settings Aler t Sound.
83 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Changing the Camera Order in the List Y ou can apply “drag and drop” in the grid area of the camera list to change the sequence of the connected Inter net Cameras, which is shown below .
84 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Global Settings After completing the connection f or each remote PTZ Internet Camer a, w e need to configure some glob al settings for all the came ras . These includ e the video databas e directory , the usage of the Hard disk, and options f or video displa y .
85 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Directory Settings: Snapshot directory The directory for storing the snapshot in *.bmp f or mat from video channels of the monitor tool and the pla yback tool, which is sho wn on page 84.
86 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Modulation Mode Y ou must select the input signal f or mat (NTSC or P AL) f or displaying the original resolution of video stream from DCS-6620 . If you are not sure which f or mat to select, then lea ve the input signal f or mat at it’ s default (NTSC).
87 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Backup Settings: Using Backup Settings in the global settings window , you can backup recorded data from selected cameras to a specified location.
88 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software This section depicts, in detail, ho w to manipulate the monitor tool. Using the Monitor Program Connection of the DCS-6.
89 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) If you do not want to monitor one video, y ou can drag and drop the video (in the video area) to the trashcan in the common control area of the monitor program.
90 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Step 2: Press and hold the left mouse b utton, and then mo v e the cursor to a display window in the video area, which is shown belo w .
91 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Video shown Empty video bo x Removing video from a display window Step 1: Mo ve the mouse cursor to the displa y windo w that contains the video channel y ou wish to remov e.
92 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Pre ss and hold th e left mouse button here . Mo v e the mouse cursor here, and then release the left mouse button.
93 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software When you choose the one-camera la yout or f our-camera la y out, the “P age up” and “Page down” buttons will be shown in the left-bottom cor ner of the video area.
94 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Back Back to pre vious la yout. Monitor Program (continued) Input/Output Control T ools Digital Input/ Digital Output Aler t Message P an/Tilt control T o view an individual camera from the multi-camera la yout, double-clic k on the desired displa y window .
95 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software IP sur veillance includes pan/tilt control, DI/DO (Digital Input / Digital Output) control, and an aler t message receiver . Each of these are described in detail below .
96 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Alert Message If you hav e chec ked the bo x for “Enab le Motion Detect” or “Enable Digital Input” on “Camer a Configurations > Aler t Settings“ screen, the aler t message will show in the window shown abov e.
97 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software About Miscellaneous Functions Full Screen Quit Minimize Stop Aler t Sound Configuration Menu This section will descr ibe some other miscellaneous functions of the icons shown abov e.
98 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Full Screen With this function, you can enlarge the selected video channel to a full-screen displa y . Press the “ESC” ke y on the ke yboard or doub le-click the mouse on the screen to retur n to a regular displa y .
99 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Record By clicking on this button, you can record video of the selected channel manually . Printer Click on the printer icon to print the current image to your def ault pr inter .
100 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling F r iendly graphic user interf ace for schedule editing Fle xible schedule scheme suitab le for all applica.
101 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software P ar t 1 P ar t 2 P ar t 3 P ar t 4 Scheduling (continued) The scheduler will not be accessible until at least one camera has been added to the camera list. Go to the configuration menu and clic k on “Scheduler” to launch the scheduler .
102 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Video channel IP address Location Scheduling (continued) The la yout of the scheduler is roughly divided into 4 parts: Part 1 The first par t of the scheduler is the video channel selection area.
103 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) In this area you will select the video channel that you want to set a schedule for . Each video ch ann el wil l di sp la y a na me , IP ad dre ss , and loc ati on .
104 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Hour Time-Line In the figure below , the Hour time-line is display ed.
105 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Apply and Erase Buttons After you hav e selected the time period with “Begin time” and “E.
106 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Digital Input In the figure above , there are f our conditions for the digital input. Check the condition that y ou would lik e to record while the condition triggers.
107 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) The Schedule Scheme operations There are six related buttons. “Load…”, “Undo”, “Clear”, “Sav e”, “Sav e as…” and “Close” f or handling the schedule schemes.
108 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software The pla yback progr am is a v er y powerful, conv enient, and easy wa y to browse the recorded video . It has one display mode (nor mal display mode) and two pla yback methods (full range and time per iod).
109 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Logging In Bef ore y ou star t the pla yback program, it is necessar y for you to log in to the application software . The figure below shows the login dialog. For security concer ns, only the admin account can log in to this program.
110 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Pla yback method Displa y adjustment tool When y ou successfully log in to the playbac k .
111 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Histogram Area The histog ram is an inter activ e contro l.
112 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Lock Windows Settings Minimize Exit Pull Bar The pull bar is a fast, fle xible control for seeking data in the selected time per iod. It represents the total length of time in that period.
113 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Database location The most impor tant item in the settings dialog is the database location setting. Y ou must set it to the director y that contains the sur v eillance database to make the program to w ork proper ly .
114 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Normal (Single Frame) Mode While in the nor mal (single frame) display mode, yo u can change the video currently displa yed by: (1) Changing the database path f or retrieving another one in the settings dialog of “System Control” tool.
115 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Histogram Area Dark Region Inv er ted region The histogram area in the nor mal displa y (single fra me) mode only shows the e vents’ occurred time and the percentage of motion detection with red bars.
116 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Location selector P er iod selector Pla yback method selector Aler t area selector Location Selector The location selector is a control that lets y ou select the camera you want to see (ref er to the figure abov e).
117 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Playback Method Selector Full Range If you select this method, the database will be displa y ed from the beginning to the end of this location.
118 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Play Th e sup po r ted “Pl a y” b utto n is an int el lig en t pla y us er -in te rf ace . Th e fun ct ion al ity of thi s bu tton can v ary to fit diff erent circum stan ces .
119 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Display Adjustment T ool When you mov e the mouse cursor to the displa ying area, the displa y adjustment toolbo x will appear .
120 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Full Screen When y ou click on the “Full Screen” b utton, the video sequence will be enlarged to the whole scree n instantl y . Y ou can doubl e clic k on an y place or the “ESC” ke y to return back to the normal screen.
121 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Zoom Out Playback Program (continued) Lock Window Each time you click on the “Zoom Out” button in the searching ra.
122 DCS-6620 User’ s Manual D-Link Systems, Inc. Using IP surveillance Software Settings Playback Program (continued) The settings dialog will pop up when you clic k the “Settings” b utton. F or more info r mation about setting this program, please ref er to the section titled “Settings .
123 DCS-6620 User’ s Manual D-Link Systems, Inc. Schedule Video Recording with Motion Detection Schedule Video Recording with Motion Detection Ne xt, run the IP sur veillance program. Click on the Configurations b utton and select Scheduler . Check “Enable motion detection.
124 DCS-6620 User’ s Manual D-Link Systems, Inc. Schedule Video Recording with Motion Detection In the Primary Schedule you can choose either Once (for one time recording) or Ever y Day (f or sched uled recor ding).
125 DCS-6620 User’ s Manual D-Link Systems, Inc. Schedule Video Recording with Motion Detection Click the Save button when finished. Y ou hav e now set a schedule to record video when motion detection is triggered. If you would like to sav e this configuration, click Save As to sav e this configuration to a f older in your hard driv e.
126 DCS-6620 User’ s Manual D-Link Systems, Inc. Frequently Asked Questions PTZ Internet Camera Features Q: What is a PTZ Internet Camera? A: The PTZ Inter net Camera is a stand-alone system connecting directly to an Ether net or F ast Ether net network.
127 DCS-6620 User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Q: Can the PTZ Internet Camera be setup as a PC-cam on a computer? A: No , the PTZ Inter net Camera is used only on an Ether net or F ast Ether net network. The D-Link DSB-C110, DSB-C310, can be used as a PC Camera (W ebcam).
128 DCS-6620 User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Q: Noisy images occur . How can I solve the problem? A: The video images might be noisy if the PTZ Inter net Camera is used in a very low light environment. T o solve this issue y ou need more lighting.
129 DCS-6620 User’ s Manual D-Link Systems, Inc. How to Ping Y our IP Address How to PING Y our IP Address The PING (P ac ket Inter net Groper) command can deter mine whether a specific IP address is accessible by sending a pack et to the specific address and waiting for a reply .
130 DCS-6620 User’ s Manual D-Link Systems, Inc. Reset and Restore There is a button hidden in the pinhole beside the Ether net sock et. It is used to reset the system or restore the factory def ault settings. Sometimes resetting the DCS-6620 will retur n the system back to a nor mal state.
131 DCS-6620 User’ s Manual D-Link Systems, Inc. External I/O Port External I/O Port 1 DI+ INPUT (Max. 50mA, 12VDC) 2 DI- INPUT (Initial state of DI is low) 3 SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) 4 SW_NOPEN OUTPUT (Max.
132 DCS-6620 User’ s Manual D-Link Systems, Inc. External I/O Port The above diagram shows a typical wiring configuration f or a normally closed PIR motion sensor . Please ref er to your specific motion sensor for the power supply connection to the de vice since this will be critical to the success of your installation.
133 DCS-6620 User’ s Manual D-Link Systems, Inc. External I/O Port Click the Network button under the Advanced tab to set the SMTP or FTP ser ver settings for the DCS-6620 . In this window , enter the settings for the SMTP or FTP ser v er to which recorded snapshots will be sent.
134 DCS-6620 User’ s Manual D-Link Systems, Inc. External I/O Port Configuring Y our Camera for External T rigger Based Recording (continued) Ne xt, clic k the Applicat ions butt on under the T ools tab to set the application settings f or the DCS-6620 .
135 DCS-6620 User’ s Manual D-Link Systems, Inc. T echnical Specifications Remote management Configuration and system log can be accessed via Web bro wser , using Inter net Explorer 5.
136 DCS-6620 User’ s Manual D-Link Systems, Inc. T echnical Specifications LED indicator 2 Status indicators: 1) P ow er , 2) POST , connection, and hear tbeat Camera specification 1/4 inch color CCD sensor A GC/A WB Electronic shutter : 1/60 ~ 1/15000 second Fix ed f ocus glass lens, F2.
137 DCS-6620 User’ s Manual D-Link Systems, Inc. Contacting T echnical Support Contacting T echnical Support T echni cal Support Y ou can find software updates and user documentation on the D-Link w ebsite.
138 DCS-6620 User’ s Manual D-Link Systems, Inc. Time Zone T able T ime Zone T able GMT stands f or Greenwich Mean Time, which is the global time that all time z ones are measured from.
139 DCS-6620 User’ s Manual D-Link Systems, Inc. Time Zone T able.
140 DCS-6620 User’ s Manual D-Link Systems, Inc. Warranty W arranty.
141 DCS-6620 User’ s Manual D-Link Systems, Inc. Warranty.
142 DCS-6620 User’ s Manual D-Link Systems, Inc. Warranty.
143 DCS-6620 User’ s Manual D-Link Systems, Inc. Registration 05/03/05 Registration.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DSC-6620 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DSC-6620 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DSC-6620 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DSC-6620 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DSC-6620 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DSC-6620 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DSC-6620 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DSC-6620. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DSC-6620 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
