Benutzeranleitung / Produktwartung DIR-628 des Produzenten D-Link
Zur Seite of 112
.
2 D-Link DIR-628 User Manual D-Link reser v es the right to revise this pub lication and to mak e changes in the content hereof without ob ligation to notify any person or organization of such re visions or changes.
3 D-Link DIR-628 User Manual T able of Contents Preface .......................................................................... 2 Manual Re visions .................................................... 2 T rademarks .................................
4 D-Link DIR-628 User Manual T able of Contents Adv anced Wireless Settings ............................ 54 R TS Threshold ............................................. 54 DTIM Inter v al ................................................ 54 WMM Function .
5 D-Link DIR-628 User Manual Section 1 - Product Overview Product Over view Note: Using a power supply with a different voltage rating than the one included with the DIR-628 will cause damage and void the warranty for this product.
6 D-Link DIR-628 User Manual Section 1 - Product Overview Network Requirements • An Ether net-based Cab le or DSL modem • IEEE 802.11n-draft or 802.
7 D-Link DIR-628 User Manual Section 1 - Product Overview Introduction T O T AL PERFORMANCE Combines award winning router f eatures and IEEE 802.11a and Dr aft 802.
8 D-Link DIR-628 User Manual Section 1 - Product Overview Features • Faster Wireless Networking - The DIR-628 provides up to 300Mbps* wireless connection with other 802.11n wireless clients . This capability allows users to par ticipate in real-time activities online , such as video streaming, online gaming, and real-time audio .
9 D-Link DIR-628 User Manual Section 1 - Product Overview Hardware Over view Connections USB Connect a USB 1.1 or 2.0 flash drive to configure the wireless settings using WCN. Reset Pressing the Reset button restores the router to its original factory def ault settings.
10 D-Link DIR-628 User Manual Section 1 - Product Overview Hardware Over view LEDs Internet LED A solid light indicates connection on the Inter net por t. This LED blinks during data transmission. P ower LED A solid light indicates a proper connection to the pow er supply .
11 D-Link DIR-628 User Manual Section 2 - Installation Before you Begin Installation This section will walk you through the installation process . Placement of the router is v er y impor tant. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage .
12 D-Link DIR-628 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your networ k using a wireless connection from vir tually anywhere within the operating range of y our wireless network.
13 D-Link DIR-628 User Manual Section 2 - Installation If y ou are connecting the router to a cable/DSL/satellite modem, please f ollow the steps belo w: 1. Place the router in an open and centr al location. Do not plug the po wer adapter into the router .
14 D-Link DIR-628 User Manual Section 2 - Installation If y ou are connecting the D-Link router to another router to use as a wireless access point and/or s witch, you will hav e to do the f ollowing .
15 D-Link DIR-628 User Manual Section 2 - Installation 6. Disconnect the Ethernet cable from the router and reconnect y our computer to y our network. 7. Connect an Ether net cable in one of the LAN por ts of the router and connect it to y our other router .
16 D-Link DIR-628 User Manual Section 2 - Installation Getting Started The DIR-628 includes a Quick Router Setup Wizard CD . F ollow the simple steps below to run the Setup Wizard to guide y ou quickly through the installation process . Inser t the Quick Router Setup Wizar d CD in the CD-ROM drive .
17 D-Link DIR-628 User Manual Section 3 - Configuration Configuration This section will show you how to configure your ne w D-Link wireless router using the web-based configuration utility .
18 D-Link DIR-628 User Manual Section 3 - Configuration Setup Wizard Y ou may clic k Setup Wizard to quic kly configure your router . If y ou want to enter y our settings without r unning the wizard, clic k Manual Configuration and skip to page 22.
19 D-Link DIR-628 User Manual Section 3 - Configuration Clic k Next to contin ue. Create a ne w pass word and then clic k Next to continue . Select your time zone from the drop-do wn menu and then click Ne xt to continue . Select the type of Inter net connection y ou use and then click Next to continue .
20 D-Link DIR-628 User Manual Section 3 - Configuration If you selected Dynamic, you ma y need to enter the MA C address of the co mp ute r th at w as la st co nn ect ed di re ct ly to y our mo de m. If y ou ar e cur re ntl y using that computer , clic k Clone Y our PC’ s MA C Address and then click Next to contin ue.
21 D-Link DIR-628 User Manual Section 3 - Configuration If y ou selected L2TP , enter your L2TP user name and passw ord. Click Next to continue . If you selected Static , enter y our network settings supplied b y your Inter net provider . Clic k Next to contin ue.
22 D-Link DIR-628 User Manual Section 3 - Configuration Se lec t Dy na mi c IP (D HC P) to ob ta in IP Ad dre ss inf or mation automatically from your ISP . Select this option if your ISP does not giv e you any IP numbers to use . This option is commonly used f or Cable modem services.
23 D-Link DIR-628 User Manual Section 3 - Configuration Select PPP oE (Username/Pass word) from the drop-do wn menu. This is a free secur ity option that provides Anti-Phishing and auto correction of URL typos . Check Enable Adv anced DNS Service if you wish to use this free security option.
24 D-Link DIR-628 User Manual Section 3 - Configuration Enter the Primar y and Secondar y DNS Ser v er Addresses (Static PPP oE only). Maximum T ransmission Unit - you may need to change the MTU f or optimal performance with your specific ISP . 1492 is the def ault MTU .
25 D-Link DIR-628 User Manual Section 3 - Configuration This is a free secur ity option that provides Anti-Phishing and auto correction of URL typos . Chec k Enable Adv anced DNS Service if you wish to use this free security option. Select Static if your ISP assigned you the IP address, subnet mask, gatew a y , and DNS ser ver addresses.
26 D-Link DIR-628 User Manual Section 3 - Configuration The DNS ser v er inf or mation will be supplied b y y our ISP (Inter net Ser vice Pro vider .) Maximum T ransmission Unit - y ou ma y need to change the MTU f or optimal perf or mance with your specific ISP .
27 D-Link DIR-628 User Manual Section 3 - Configuration This is a free secur ity option that provides Anti-Phishing and auto correction of URL typos. Chec k Enable Adv anced DNS Service if you wish to use this free security option. Select Static if your ISP assigned you the IP address, subnet mask, gatew ay , and DNS ser ver addresses.
28 D-Link DIR-628 User Manual Section 3 - Configuration MTU: Clone MAC Address: Maximum T ransmission Unit - you ma y need to change the MTU f or optimal perf or mance with y our specific ISP . 1400 is the def ault MTU . The def ault MAC Address is set to the Inter net por t’ s ph ysical interf ace MAC address on the Broadband Router .
29 D-Link DIR-628 User Manual Section 3 - Configuration This is a free secur ity option that provides Anti-Phishing an d au to cor re ct io n of URL ty pos . Che c k En ab le Ad v an ced DNS Service if you wish to use this free security option. Enter the IP address assigned by y our ISP .
30 D-Link DIR-628 User Manual Section 3 - Configuration Wireless Settings If y ou want to configure the wireless settings on your router using the wizard, click Wireless Network Setup Wizar d and ref er to page 75. Clic k Ad d Wireless Device with WPS if y ou want to add a wireless de vice using Wi-Fi Protected Setup (WPS) and ref er to page 77.
31 D-Link DIR-628 User Manual Section 3 - Configuration Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Clic k Add New to create your o wn time schedule to enable the wireless function.
32 D-Link DIR-628 User Manual Section 3 - Configuration The A uto Channel Scan setting can be selected to allow the DIR-628 to choose the channel with the least amount of interf erence. Indicates the channel setting f or the DIR-628. By def ault the channel is set to 6.
33 D-Link DIR-628 User Manual Section 3 - Configuration This section will allow y ou to change the local network settings of the router and to configure the DHCP settings. Network Settings Enter the IP address of the router . The default IP address is 192.
34 D-Link DIR-628 User Manual Section 3 - Configuration Check this box to enable the DHCP ser v er on your router . Uncheck to disab le this function.
35 D-Link DIR-628 User Manual Section 3 - Configuration This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates . This setting has no eff ect if the ‘Learn NetBIOS information from W AN’ is activ ated.
36 D-Link DIR-628 User Manual Section 3 - Configuration DHCP Reser vation If y ou want a computer or de vice to alwa ys hav e the same IP address assigned, y ou can create a DHCP reser v ation. The router will assign the IP address only to that computer or de vice.
37 D-Link DIR-628 User Manual Section 3 - Configuration Reserve: Note: The Rev oke option will not disconnect a PC with a current network session from the networ k; y ou would need to use MA C Address Filter to do that. Re vok e will only free up a DHCP Address f or the very ne xt requester .
38 D-Link DIR-628 User Manual Section 3 - Configuration USB Settings Use this section to configure your USB por t. There are two configurations to choose from: Networ k USB and WCN Configuration.
39 D-Link DIR-628 User Manual Section 3 - Configuration The DIR-628 can be configured as a vir tual server so that remote users accessing W eb or FTP ser vices via the pub lic IP address can be automatically redirected to local ser v ers in the LAN (Local Area Network).
40 D-Link DIR-628 User Manual Section 3 - Configuration This will allow y ou to open a single por t. If you would lik e to open a range of por ts, ref er to the ne xt page. Enter a name f or the rule or select an application from the drop-down menu. Select an application and click << to populate the fields .
41 D-Link DIR-628 User Manual Section 3 - Configuration This will allow y ou to open a single por t or a range of por ts. Port For warding En ter a nam e f or the rule or sel ec t an appl ic ati on fro m the dro p-d ow n men u. Se lect an appl icat ion and click << to populate the fields .
42 D-Link DIR-628 User Manual Section 3 - Configuration Enter a name for the r ule. Y ou may select a pre-defined application from the drop-down menu and clic k << . This is the por t used to trigger the application. It can be either a single por t or a range of por ts.
43 D-Link DIR-628 User Manual Section 3 - Configuration QoS Engine Check to enab le T raffic Shaping. This option is enabled b y default when the T raffic Shaping option is enabled. This option will allow y our router to automatically determine the uplink speed of your Internet connection.
44 D-Link DIR-628 User Manual Section 3 - Configuration When Connection T ype is set to automatic, the automatically detected connection type is displa yed here . This option is disabled by def ault. Enable this option f or better perf or mance and e xper ience with online games and other interactiv e applications, such as V oIP .
45 D-Link DIR-628 User Manual Section 3 - Configuration Network Filters Select T urn MA C Filtering Off , allow MA C addresses listed below , or d e ny M AC ad dr ess es list ed belo w from the drop -do wn menu. Enter the MAC address you would lik e to filter .
46 D-Link DIR-628 User Manual Section 3 - Configuration Access Control Click the Add P olicy button to star t the Access Control Wizard. Add Policy: The Access Contr ol sect ion allo ws you to cont rol access in and out of yo ur netw ork.
47 D-Link DIR-628 User Manual Section 3 - Configuration Enter a name f or the policy and then click Next to continue . Access Control Wizard (continued) Select a schedule (I.E. Alwa ys) from the drop-down menu and then click Ne xt to continue. Enter the follo wing inf or mation and then click N e x t t o continue .
48 D-Link DIR-628 User Manual Section 3 - Configuration Select the filtering method and then click Next to contin ue. Access Control Wizard (continued) Enter the rule: Enable - Chec k to enab le the r ule . Name - Enter a name f or y our r ule . Dest IP Start - Enter the star ting IP address.
49 D-Link DIR-628 User Manual Section 3 - Configuration W ebsite Filters Add Website Filtering Rule: Website URL/ Domain: Select Allow or Den y . Enter the ke ywords or URLs that y ou want to allow or b lock.
50 D-Link DIR-628 User Manual Section 3 - Configuration Enter a name f or the inbound filter rule. Select Allow or Den y . Check to enab le r ule . Enter the star ting IP address. Enter 0.0.0.0 if you do not w ant to specify an IP range. Enter the ending IP address .
51 D-Link DIR-628 User Manual Section 3 - Configuration Firewall Settings A fire wall protects your network from the outside world. The D-Link DIR-628 off ers a firew all type functionality . The SPI f eature helps pre vent cyber attac ks. Sometimes you ma y want a computer exposed to the outside world f or cer tain types of applications.
52 D-Link DIR-628 User Manual Section 3 - Configuration Application Level Gateway Configuration Here you can enab le or disab le ALG’ s. Some protocols and applications require special handling of the IP pa yload to mak e them work with network address translation (NA T).
53 D-Link DIR-628 User Manual Section 3 - Configuration Enter the IP address of pack ets that will take this route. Enter the netmask of the route, please note that the octets must match your destination IP address. Enter your next hop gate wa y to be tak en if this route is used.
54 D-Link DIR-628 User Manual Section 3 - Configuration Set the transmit po wer of the antennas . Beacons are pac kets sent by an Access P oint to synchronize a wireless network. Specify a value . 100 is the def ault setting and is recommended. This v alue should remain at its def ault setting of 2432.
55 D-Link DIR-628 User Manual Section 3 - Configuration Enable the Wi-Fi Protected Setup f eature. Locking the wireless security settings pre vents the settings from being changed by the Wi-Fi Protected Setup f eature of the router . Devices can still be added to the netw ork using Wi-Fi Protected Setup .
56 D-Link DIR-628 User Manual Section 3 - Configuration Thi s Wiz ard hel ps y ou add wirele ss de vices to the wire less network. The wiza rd will either displa y the wireless network settin gs to guide you through manual configur ation, prompt you to enter the PIN for the de vice, or ask you to press the configuration button on the de vice.
57 D-Link DIR-628 User Manual Section 3 - Configuration Select A ut o to add a wireless client using WPS (Wi-Fi Pro tecte d Set up). Once you sele ct A uto and clic k Con nect , y ou will ha v e a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection.
58 D-Link DIR-628 User Manual Section 3 - Configuration T o use the Universal Plug and Pla y (UPnP ™ ) f eature check the Enabled UPnP b o x. U PN P pro vide s com pati bil ity with netw orki ng equ ipm ent , software and peripherals . Unchecking the bo x will not allo w the DIR-628 to respond to pings .
59 D-Link DIR-628 User Manual Section 3 - Configuration Click to enab le the Securespot ser vices. Enable Securespot Services: Securespot ™ Please view the Securespot user guide on the D-Link CD f or more inf or mation.
60 D-Link DIR-628 User Manual Section 3 - Configuration Enter a new passw ord f or the Administrator Login Name. The administrator can mak e changes to the settings. Enter the new pass word for the User login. If y ou login as the User , you can only see the settings, but cannot change them.
61 D-Link DIR-628 User Manual Section 3 - Configuration Remote Admin Port: Inbound Filter: The por t number used to access the DIR-628. Example: http://x.x.x.x:8080 where x.x.x.x is the Inter net IP address of the DIR-628 and 8080 is the por t used for the W eb Management interf ace.
62 D-Link DIR-628 User Manual Section 3 - Configuration T ime Settings Select the Time Zone from the drop-down menu. T o select Da ylight Saving time manually , select enabled or disab led, and enter a star t date and an end date f or da ylight sa ving time.
63 D-Link DIR-628 User Manual Section 3 - Configuration SysLog The Broadband Router k eeps a running log of e v ents and activities occurring on the Router . Y ou ma y send these logs to a SysLog ser v er on y our network. Enable Logging to SysLog Server: SysLog Server IP Address: Check this box to send the router logs to a SysLog Ser v er .
64 D-Link DIR-628 User Manual Section 3 - Configuration Email Settings The Email f eature can be used to send the system log files, router aler t messages, and firmware update notification to y our email address.
65 D-Link DIR-628 User Manual Section 3 - Configuration On Schedule: Schedule: Selecting this option will send the logs via email according to schedule. This option is enabled when On Schedule is selected. Y ou can select a schedule from the list of defined schedules.
66 D-Link DIR-628 User Manual Section 3 - Configuration Use this option to sav e the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Sav e button. Y ou will then see a file dialog, where y ou can select a location and file name f or the settings.
67 D-Link DIR-628 User Manual Section 3 - Configuration Cl ic k on Ch ec k Onl in e No w f or Lat est Fi rm wa re V e r si on to find o ut if the re is a n upd at ed firmw are ; if so , download the new fir mware to your hard drive .
68 D-Link DIR-628 User Manual Section 3 - Configuration Dynamic Domain Name System is a method of k eeping a domain name linke d to a changing IP Address. Check the bo x to enable DDNS . Choose your DDNS provider from the drop down men u. Enter the Host Name that you registered with your DDNS service provider .
69 D-Link DIR-628 User Manual Section 3 - Configuration The Ping T est is used to send Ping pack ets to test if a computer is on the Inter net. Enter the IP Address that you wish to Ping, and click Ping . The results of your ping attempts will be displa yed here .
70 D-Link DIR-628 User Manual Section 3 - Configuration Enter a name f or your ne w schedule. Select a day , a range of da ys, or All Week to include e v er y da y . Check All Day - 24hrs or enter a star t and end time f or your schedule . Click Save to sav e y our schedule .
71 D-Link DIR-628 User Manual Section 3 - Configuration This page displa ys the current inf or mation f or the DIR-628. It will display the LAN, W AN (Inter net), and Wireless inf or mation. If your Inter net connection is set up f or a Dynamic IP address then a Release button and a Renew button will be displa yed.
72 D-Link DIR-628 User Manual Section 3 - Configuration Log What to View: View Levels: Apply Log Settings: Refresh: Clear: Email Now: Save Log: Y ou can select the types of messages that y ou want to displa y from the log . Firewa ll & Secu rity , System , and Router Status messages can be selected.
73 D-Link DIR-628 User Manual Section 3 - Configuration Stats T he sc re en b e lo w d is pl a ys th e T r af fic St at i st ic s . H e re y ou ca n v ie w th e a mo u nt of pa c k et s th a t pa ss t hr ou gh t h e DI R- 6 28 on both the W AN and the LAN por ts.
74 D-Link DIR-628 User Manual Section 3 - Configuration Internet Sessions The Inter net Sessions page displa ys full details of activ e Inter net sessions through y our router . An Inter net session is a con v ersation betw een a program or application on a LAN-side computer and a program or application on a W AN-side computer .
75 D-Link DIR-628 User Manual Section 3 - Configuration Dir: Priority: Time Out: The direction of initiation of the conv ersation: Out - Initiated from LAN to W AN. In - Initiated from W AN to LAN. The pref erence given to outbound pack ets of this conv ersation by the QoS Engine logic.
76 D-Link DIR-628 User Manual Section 3 - Configuration The wireless client tab le will assist y ou in your wireles network setup and wireless device connection.
77 D-Link DIR-628 User Manual Section 3 - Configuration Giv e your netw or k a name. Y ou ma y use up to 32 characters . Next, choose to automatically assign a network ke y or to hav e one manually assign.
78 D-Link DIR-628 User Manual Section 3 - Configuration Support.
79 D-Link DIR-628 User Manual Section 4 - Security Wireless Security This section will sho w y ou the diff erent le v els of secur ity you can use to protect your data from intr uders.
80 D-Link DIR-628 User Manual Section 4 - Security Wireless Network Setup Wizard T o run the secur ity wizard, click on Setup at the top and then clic k Wireless Network Setup Wizard . T ype your desired wireless netw ork name (SSID). A utomatically: Select this option to automatically generate the router’ s networ k k ey and clic k Next .
81 D-Link DIR-628 User Manual Section 4 - Security If you selected A utomatically , the summar y window will displa y your settings. Wr ite down the security ke y and enter this on your wireless clients. Click Save to sav e your settings. If y ou selected Manuall y , the f ollowing screen will appear .
82 D-Link DIR-628 User Manual Section 4 - Security F rom the Basic > Wizar d screen, clic k Add Wireless Device with WPS . Add Wireless Device with WPS Wizard PIN: Select this option to use PIN method. In order to use this method y ou must know the wireless client’ s 8 digit PIN and clic k Connect .
83 D-Link DIR-628 User Manual Section 4 - Security Configure WP A-Personal (PSK) It is recommende d to enabl e encr yption on your wireless router bef ore yo ur wireless netw ork ada pters . Please estab lish wireless connectivity bef ore enabling encr yption.
84 D-Link DIR-628 User Manual Section 4 - Security It is recommende d to enabl e encr yption on your wireless router bef ore yo ur wireless netw ork ada pters . Please estab lish wireless connectivity bef ore enabling encr yption. Y our wireless signal ma y degr ade when enab ling encr yption due to the added ov erhead.
85 D-Link DIR-628 User Manual Section 4 - Security 8. Ne xt to RADIUS Ser ver P or t , enter the por t you are using with y our RADIUS ser v er . 1812 is the default por t.
86 D-Link DIR-628 User Manual Section 4 - Security Connect to a Wireless Network Using Windows Vista ® Windows Vista ® users may use the built-in wireless utility . If you are using another company’ s utility or Windows ® 2000, please ref er to the user manual of y our wireless adapter f or help with connecting to a wireless network.
87 D-Link DIR-628 User Manual Section 4 - Security Configure Wireless Security It is recommended to enab le wireless secur ity (WP A/WP A2) on y our wireless router or access point before configuring y our wireless adapter . If you are joining an e xisting network, y ou will need to know the secur ity k ey or passphrase being used.
88 D-Link DIR-628 User Manual Section 4 - Security 3. Enter the same secur ity ke y or passphrase that is on your router and clic k Connect . It ma y take 20-30 seconds to connect to the wireless network. If the connection f ails, please v er ify that the secur ity settings are correct.
89 D-Link DIR-628 User Manual Section 4 - Security Connect Using WCN 2.0 in Windows Vista ® The router suppor ts Wi-Fi protection, ref erred to as WCN 2.0 in Windows Vista ® . The f ollowing instructions f or setting this up depends on whether y ou are using Windows Vista ® to configure the router or third par ty software .
90 D-Link DIR-628 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users ma y use the built-in wireless utility (Zero Configuration Utility). The f ollowing instructions are for Ser vice P ac k 2 users.
91 D-Link DIR-628 User Manual Section 5 - Connecting to a Wireless Network Configure WP A-PSK It is recomme nded to enab le encr yptio n on your wireles s router or acces s point bef ore config uring y our wireless adapter . If y ou are joining an e xisting network, you will need to kno w the passphrase being used.
92 D-Link DIR-628 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection bo x will appear . Enter the WP A-PSK passphrase and clic k Connect . It ma y take 20-30 seconds to connect to the wireless network. If the connection f ails, please v er ify that the WP A-PSK settings are correct.
93 D-Link DIR-628 User Manual Section 6 - T roubleshooting T roubleshooting This chapter provides solutions to prob lems that can occur during the installation and operation of the DIR-628. Read the f ollowing descr iptions if y ou are having problems .
94 D-Link DIR-628 User Manual Section 6 - T roubleshooting • Configure y our Inter net settings: • Go to Star t > Settings > Control P anel . Doub le-clic k the Internet Options Icon. F rom the Security tab , clic k the button to restore the settings to their def aults.
95 D-Link DIR-628 User Manual Section 6 - T roubleshooting 3. Wh y can’t I connect to cer tain sites or send and receive emails when connecting thr ough m y router? If you are ha ving a prob lem sen.
96 D-Link DIR-628 User Manual Section 6 - T roubleshooting Y ou should star t at 1472 and work your wa y down b y 10 each time. Once y ou get a reply , go up by 2 until y ou get a fragmented pack et. T ake that v alue and add 28 to the value to account f or the v ar ious TCP/IP headers .
97 D-Link DIR-628 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
98 D-Link DIR-628 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another wa y of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly , so you ha v e the freedom to connect computers anywhere in your home or office network.
99 D-Link DIR-628 User Manual Appendix A - Wireless Basics Wireless P ersonal Area Netw ork (WP AN) Bluetooth is the industr y standard wireless technology used f or WP AN.
100 D-Link DIR-628 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding e v er ywhere not just at home or office. P eople like the freedom of mobility and it’ s becoming so popular that more and more pub lic f acilities now pro vide wireless access to attr act people.
101 D-Link DIR-628 User Manual Appendix A - Wireless Basics Security Don’t let y ou ne xt-door neighbors or intruders connect to yo ur wireles s netwo r k. Secure you r wireless network by tur ning on the WP A or WEP secur ity f eature on the router .
102 D-Link DIR-628 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After y ou install y our ne w D-Link adapter , b y def ault, the TCP/IP settings should be set to obtain an IP address from a DHCP ser v er (i.e. wireless router) automatically .
103 D-Link DIR-628 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gate wa y/router , or you need to assign a static IP address, please f.
104 D-Link DIR-628 User Manual Appendix C - T echnical Specifications T echnical Specifications Standards • IEEE 802.11n (draft) • IEEE 802.11g • IEEE 802.11a • IEEE 802.3 • IEEE 802.3u Security • WP A-P ersonal • WP A2-P ersonal • WP A-Enter prise • WP A2-Enter prise Frequency Range • 2.
105 D-Link DIR-628 User Manual Appendix D - Contacting T echnical Support Contacting T echnical Support Canadian customers can contact D-Link technical suppor t through our web site or b y phone. Bef ore you contact technical suppor t, please hav e the f ollowing ready: • Model number of the product (e .
106 D-Link DIR-628 User Manual Appendix E - Warranty W arranty Subject to the ter ms and conditions set f or th herein, D-Link Canada, Inc. (“D-Link”) provides this Limited W arranty: • Only to .
107 D-Link DIR-628 User Manual Appendix E - Warranty conf or ms to D-Link’ s functional specifications f or the Softw are or to refund the por tion of the actual purchase price paid that is attr ibutab le to the Software.
108 D-Link DIR-628 User Manual Appendix E - Warranty sent COD will be rejected b y D-Link. Products shall be fully insured by the customer and shipped to D-Link Canada, Inc., 2525 Meado wv ale Boule vard , Mi ssissauga, Ont ario , Canada L5N 5S2. D-Link will not be held responsi ble f or any pac kages that are lost in transit to D-Link.
109 D-Link DIR-628 User Manual Appendix E - Warranty Limitation of Liability: T O THE MAXI MUM EXTENT PERMI TTE D BY LA W , D -LIN K IS NO T LIAB LE UND ER ANY CONTR A CT , NEG LIGE NCE , STRIC T LIAB.
110 D-Link DIR-628 User Manual Appendix E - Warranty FCC Statement: This equipment has been tested and found to comply with the limits f or a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interf erence in a residential installation.
111 D-Link DIR-628 User Manual Appendix E - Warranty IC statement Operation is subject to the f ollowing two conditions: 1) This de vice ma y not cause interf erence and 2) This de vice must accept an y interf erence, including interf erence that may cause undesired oper ation of the de vice.
112 D-Link DIR-628 User Manual Appendix F - Registration V ersion 1.4 A ugust 24, 2009 Product registration is entirely v oluntar y and f ailure to complete or retur n this f or m will not diminish your warr anty rights.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DIR-628 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DIR-628 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DIR-628 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DIR-628 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DIR-628 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DIR-628 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DIR-628 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DIR-628. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DIR-628 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
