Benutzeranleitung / Produktwartung DFE-690TXD des Produzenten D-Link
Zur Seite of 57
DFE - 690TXD Cardbus PC card User ’s Manual Rev. 01 (July, 2001).
CONTENTS Introduction ................................................................ 1 General Desc ription ................................................................... 1 Contents of Package ................................................. 3 About Fast Ethernet .
ii Checking the TCP/IP Address ................................................... 37 Checking the Connect ion by Pinging ......................................... 39 D - Link Offices Worldwide ......................................... 41 Specifications .
1 Introduction Thank you for choosing D - Link DFE - 690TXD, the value leader among Ethernet/Fast Ethernet adapters for notebook PCs. This chapter provides a general description of DFE - 690TXD features, wit h a summary of features at the end of the chapter.
2 The D - Link DFE - 690TXD automatically detects the parameters of its Ethernet environment , and automatically negotiates and determines its own speed and duplex settings as required for maximum performance within the environment.
3 Contents of Package A One DFE - 690TXD Cardbus PC Card B Driver CD C User ’ s Manual in CD - ROM D Quick Install Guide E One case holder for the DFE - 690TXD DFE - 690TXD Cardbus PC Card.
4 About Fast Ethernet Fast Ethernet is a network te chnology specified by IEEE Standard 802.3u. It extends the traditional 10Mbps (10 megabit/sec) Ethernet technology to achieve 100Mbps (100 megabit/sec) transmission and reception.
5 About Autonegotiation The basic idea of auto - negotiation can be understood by reflecting for a moment on the familiar process of making a dialup connection between two modems. You have probably heard some exchanges between your local modem and a modem at the other end of a telephone line.
6 concept, but much briefe r. The two devices involved in the autonegotiation will be your DFE - 690TXD and the switch or hub through which it is connected into the LAN.
7 supporting device. Once the auto - negotiation is completed, the line is ready, and it will p rovide an optimal data channel between the DFE - 690TXD and the supporting device. The line will remain ready without further auto - negotiation action until the link is broken.
8 LED Indicators The direct port features 2 LED indicators: 100 Indicator: indicates that data transmittal rate is at a fast 100 Mbps. 10 Indicator: indicates that data transmittal rate is at 10 Mbps.
9 Summary of Features Features of Model DFE - 690TXD Cardbus PC Card: • 100Mbps and 10Mbps data rates in compliance with IEEE 802.3 • Ethernet standards 100Base - TX and 10Base - T • PCMCIA PC Card Standard Ver.
10 LAN Manager Windows 95 Windows 95 OSR2 Windows 98 Windows 98 SE Windows ME Windows 2000 Windows XP Pers onal NetWare NetWare ODI Client 3.X, 4.X NetWare 4.
11 Troubleshooting Confirming the Connection (LED Indicator) When the notebook computer is powered “ON, ” and the DFE - 690TXD is inserted into an open slot connector, please check the following items if your LED light is not “ON.
12 Troubleshooting the Hardware Installation If you experience any problems with the hardware installation, first ascertain that all network cable connections are firm, that the proper grade of cable is used for the network connection, and that the cable makeup is correct (straight –– without un - needed crossovers in the connector wiring).
13 Properties ” dialog box. 3. Double - Click “Network Adapters ” if you do not see any items branching out. You should see “D - Link DFE - 690TXD Cardbus PC Card ” branching out after double - clicking “Networ k Adapters.
14 “Uplink ” port. The “Uplink” port is only used when connecting your hub to another hub or switch. Diagnostics and Checking Communications Included on the CD - ROM is a “DFE - 690TXD PCMCIA Adapter Driver Program.
15 Pinging your DFE - 690TXD Card Follow these steps to Ping a device: Ping is the acronym for Packet Internet Groper (PING), a utility to determine if a specific IP a ddress is accessible. It works by sending a packet to the specified address and waiting for a reply.
16 Type in following: ping:xxx.xxx.xx.xx, where xxx.xxx.xx.xx i s the IP address to be pinged (i.e. 192.152.81.85). In this case, computer A is pinging its own IP address.
17 Net working Basics You may have had some ideas about how to use your new network prior to i nstalling this product - sharing files, printing from a computer on the network, or accessing the Internet on multiple computers with one connection. This section will help you get started on those ideas or even give you some new ones.
18 Computer Identification If you had previously given your Windows 98 computers names or if you are using Windows 98, you may need to verify that each computer has a unique name and common workgr oup name. A. On your Desktop, right - click the icon "Network Places" and select "Properties" from the context menu.
19 C. Type a unique, identifying name for this particular computer in the "Computer name:" box. This will be the name that other computers on your network will use to communicate with this computer. Each computer ’ s name must be unique on a particular network or confusion will result.
20 Sharin g Files With your computers connected together on a network, you may now open and save files on another computer. You will be able to specify particular folders or disk drives to "share" and even password protect them. The steps below will enable you to share specific files and folders with other computers on your network.
21 D. Click to place a check mark next to "I want to be able to give others access to my files." E. Click "OK" o n the "File and Print Sharing" dialog box. F. Click "OK" on the "Network" dialog box. G.
22 J. Right - click on the disk drive or folder icon and select "Sharing.".
23 K. Select "Share As:" to set the parameters for sharing this particular disk drive or folder. L. The "Share Name:" box is used to identify the disk drive or folder you are sharing to other computers on the network. You can give it any name you wish.
24 O. "Passwords:" allow you to apply a level of security to your shared disk drives and folders. Another computer (user) will be required to enter the password you designate here before accessing the disk drive or folder.
25 Sharing Printers "Sharing" a printer connected to one computer with other computers on your network can be very convenient - allowing you to print from any computer on the network. The steps below will enable you to print with other computers on your network.
26 B. Click the "File and Print Sharing" button. C. Click to place a check mark next to "I want to be able to allow others to print to my printer(s)." D. Click "OK" on the "File and Print Sharing" dialog box. E.
27 Go to START>SETTINGS>PRINTERS Right click on the printer you want to share with others on the network and select "Sharing." G . Click "Share As:" and provide a "Share Name:" to identify the printer to other computers on the network.
28 I. Double click the "Add Printer" icon. J. The "Add Printer Wizard" will appear. Click "Next." K. Choose "Network printer" and click "Next." L. Now you will identify the location of the Network Printer.
29 How to Install TCP/IP Go to START > SETTINGS> CONTROL PANEL Double click on “Network.”.
30 Select “D - Link DFE - 690TXD Cardbus PC Card.” Click on “Add.” Select “Protocol.” Click “Add.”.
31 Select “M icrosoft.” Scroll down and select “TCP/IP.” Click “OK.” Now the “TCP/IP for D - Link DFE - 690TXD Cardbus PC Card ” is available. The TCP/IP Installation is complete. Configuring a Dynamic IP Address When the drivers are installed, the default setting is set to obtain an IP dynamically through a DHCP server.
32 Double Click on “Network” Highlight “TCP/IP. ” Click on “Properties.”.
33 NOTE: If TCP/I P is not present, see the previous section: “How to Install TCP/IP” When the TCP/IP window opens, choose the “IP Address ” tab. Select “Obtain an IP Address Automatically.” Click “OK.” When the network properties window comes back up, Click “OK.
34 Win dows will ask you to reboot. Click “Yes.” You have completed the configuration of the Dynamic IP Address. Configuring a Static IP Address Go to START > SETTINGS > CONTROL PANEL Double Click on “Network.
35 Highlight “TCP/IP.” Scroll down if you can not see it. Click on “Properties.”.
36 NOTE: If TCP/IP is not present, please see: “How to Install TCP/IP.” When the “TCP/IP Properties ” window opens, choose the “IP Address ” tab. Select “Specify an IP address.” Enter an IP address into the empty field. Suggested IP Range 192.
37 Checking the TCP/IP Address Go to START > RUN Type "winipcfg" in the "Open" box. Click “OK.”.
38 Click "OK." The IP Configuration screen will be displayed. The IP address will be displayed in the IP Address box. Click on "More Info" to display additional IP information.
39 Checking the Connection by Pinging Go to START > RUN Type "command" in the "Open" box. Click "OK" to get to a DOS prompt.
40 Type "ping 192.168.0.1," which is the IP address of the Gateway in this case, and hit the "Enter" key. A successful ping will show four replies.
41 D - Link Offices Worldwide AUSTRALIA D - LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61 - 2 - 9417 - 7100 FAX: 61 - 2 - 9417 - 1077 TOLL FREE: 1800 - 177 - 100 (Australia), 0800 - 900900 (New Zealand) URL: www.
42 JAPAN D - LINK JAPAN 10F, 8 - 8 - 15 Nishi - Gotanda, Shinagawa - ku, Tokyo 141 Japa n TEL: 81 - 3 - 5434 - 9678 FAX: 81 - 3 - 5434 - 9868 URL: www.
43 Specifications Standards : • IEEE 802.3 10Base - T Ethernet • IEEE 802.3u 100Base - TX Fast Ethernet • ANSI/IEEE 802.3 NWay Auto - Negotiation • PCMCIA 2.
44 Diagnostic LEDs: • 10M Link/Activity • 100M Link Activity N etwork Data Transfer Rate: • Ethernet: 10Mbps (Half - duplex) • Ethernet: 20 Mbps (Full - duplex) • Fast Ethernet: 100Mbps (Hal.
45 • NDIS 2.0 for Microsoft LAN Manager for DOS • NDIS 2.0 for Microsoft Network Client 3.0 for Workgroup 3.11 • Packet Driver for NCSA • Packet Driver for WinSock • Novell Netware DOS ODI Driver • Novell Netware Server v3.12 • Novell Netware Server v4.
46 Contacting Technical Support D - Link provides free technical support for customers within the United States. U.S. customers can contact D - Link technical support through our web site, by e - mail, or by phone. United States technical support is available Monday through Friday from 6:00 a.
47 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
48 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
49 Limited Warranty D - Link Systems, Inc. ( “D - LINK ”) provides this limited warranty for its pro duct only to the person or entity who originally purchased the product from D - Link or its authorized reseller or distributor.
50 or if D - Link determines in its sole discretion that it is not practical to repair or replace t he defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D - Link upon return to D - Link of the defective Hardware.
51 nonconformance in sufficient detail to allow D - Link to confirm the same. The original product owner must obtain a Return Mat erial Authorization (RMA) number from the Authorized D - Link Service .
52 Limitation of Liability: TO THE M AXIMUM EXTENT PERMITTED BY LAW, D - LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF T.
53 Registration Register by mail or online at http://www.dlink.com/sales/reg/ Print, type or use block letters. Your name: Mr./Ms _____________________________________________________________________________ Organization: _____________________________ ___________________ Dept.
54.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DFE-690TXD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DFE-690TXD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DFE-690TXD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DFE-690TXD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DFE-690TXD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DFE-690TXD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DFE-690TXD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DFE-690TXD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DFE-690TXD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
