Benutzeranleitung / Produktwartung DCS-6111 des Produzenten D-Link
Zur Seite of 85
.
2 D-Link DCS-6111 User Manual Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 System Requirements ....................................
3 D-Link DCS-6111 User Manual Table of Contents Networking Basics .................................................... 80 Check your IP address .......................................... 80 Statically Assign an IP address .............................
4 D-Link DCS-6111 User Manual Section 1 - Product Overview System Requirements • Windows ® XP or Windows Vista ® • At least 256MB of memory (512MB recommended) • An available Ethernet connection • Internet Explorer 6.x or higher • VGA card resolution: 800 x 600 or above • CPU: 1.
5 D-Link DCS-6111 User Manual Section 1 - Product Overview Introduction The DCS-6111 is a xed dome network camera for indoor, ofce or home use, and designed to target the middle- market.
6 D-Link DCS-6111 User Manual Section 1 - Product Overview • Powerful Sur veillance - The DCS-6111 uses the WDR VGA Progressive CMOS technology that delivers exceptional picture quality. The Wide Dynamic Range capability achieves high resolution, more detailed images in high contrast lighting conditions (for example, strong backlight).
7 D-Link DCS-6111 User Manual Section 1 - Product Overview • Supported Protocols - The DCS-6111 supports IPv6, the latest version of the Internet Protocol and a wide variety of protocols such as RTSP, FTP, SMTP, NTP, HTTP and HTTPS. In addition, UPnP DDNS and LLT D proto col s are supp orte d for Win dows Vista users .
8 D-Link DCS-6111 User Manual Section 1 - Product Overview Hardware Over view Connections DC Power Connector The DC power connector is located on the side panel of the DCS-6111.
9 D-Link DCS-6111 User Manual Section 1 - Product Overview Hardware Over view LEDs Status LED Blinking Red: indicates power is being supplied to the camera. Solid Green: indicates that a connection has been established via Ethernet port. Blinking Green: indicates trafc movement in the camera.
10 D-Link DCS-6111 User Manual Section 2 - Installation Hardware Installation WhenMountingtoaCeiling Find a suitable place to install the camera using the alignment stencil. Place the camera at the desired operating location and insert the screws through the two holes located at the base of the camera.
11 D-Link DCS-6111 User Manual Section 2 - Installation NetworkDeployment General Connection (without PoE) Connect the network camera to a switch via an Ethernet cable.
12 D-Link DCS-6111 User Manual Section 2 - Installation T urn on the computer and insert the D-Link DCS-6111 Autorun CD into the CD-ROM drive . The fol lowin g st ep- by-st ep inst ructi ons displayed are shown when using Window s Vista ® operating system.
13 D-Link DCS-6111 User Manual Section 2 - Installation Click I Agree to accept the License Agreement. Click I Agree Click the Br owse b ut ton if yo u wo uld lik e t o c han ge th e de st in ati on of installation. Otherwise, click Install to continue.
14 D-Link DCS-6111 User Manual Section 2 - Installation To start the installation click Install. Note: The installation may take sev eral minutes to complete . Click Finish Click Finis h to complete installation and the D-Link Installation Wizard window will pop up for camera conguration.
15 D-Link DCS-6111 User Manual Section 3 - Conguration Click Manual Setup ConguringY ourCamerawiththeInstallationWizard If the D-Link Installation Wizard window does not pop up after completion of software installation, click on the icon that was created in your Windows Start Menu.
16 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Enter a password, and conrm the password for your admin acccount and click Next . Note: The default administrator username is admin and the password is left blank. The password can also be changed after installation.
17 D-Link DCS-6111 User Manual Section 3 - Conguration The PPPoE Setting s c r e e n d i s p l a y s . E n t e r t h e u s e r n a m e a n d p a s s w o r d p r o v i d e d b y y o u r I S P t o c o n n e c t t o t h e I n t e r n e t b y P P P o E .
18 D-Link DCS-6111 User Manual Section 3 - Conguration Check the Get IP by DHCP Ser ver automatically box to obtain a new IP address every time the camera starts up. Click Next to continue. Select UPnP Port For warding if your router supports this function.
19 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next A window will pop up asking you if you want to access the DCS-6111 via mobile phone.
20 D-Link DCS-6111 User Manual Section 3 - Conguration Click Apply to apply the settings listed in the window to the device. The application may take a few minutes to process. Click Apply A w in dow wil l po p up to co nr m th at th e app lic ati on wa s su cc ess ful ly congured.
21 D-Link DCS-6111 User Manual Section 3 - Conguration Double-click DCS-6111 in the Installation Wizard window to launch the camera’s web conguration page. Note: Please see the user manual f or more inf ormation. Enter admin as the defa ult user nam e and leave the pas swo rd blank by default.
22 D-Link DCS-6111 User Manual Section 3 - Conguration This section shows your camera’s live video. You can congure your settings using the buttons in the window. For more information on using the web conguration, please refer to the user manual.
23 D-Link DCS-6111 User Manual Section 3 - Conguration AdjustingtheLens Based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures: AdjustingtheViewingAngle Loosen the pan screw and turn the lens module left and right until the desired position is achieved.
24 D-Link DCS-6111 User Manual Section 3 - Conguration AttachingtheEnclosure Once the lens is properly adjusted, rearrange the light shield so that it will not obstruct the lens during surveillance. Place the dome enclosure over the network camera so that the LED sticker on the dome enclos ure is properl y aligned with the camera ’s LED.
25 D-Link DCS-6111 User Manual Section 3 - Conguration W eb-basedCongurationUtility To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of your Network Camera (http://192.168.0.120) Note: In the example, this addr ess is 192.
26 D-Link DCS-6111 User Manual Section 3 - Conguration LiveVideo As seen by Mozilla Firefox and Netscape users, Quick Time player is invoked to stream the live video.
27 D-Link DCS-6111 User Manual Section 3 - Conguration UsingR TSPPlayers Quick Time Player Real Player VLC media player mpegable Player pvPlayer 1. Launch a RTSP player. 2. Choose File > Open URL. 3. Type the URL command in the text box and then click OK.
28 D-Link DCS-6111 User Manual Section 3 - Conguration Using3GPPMobilePhones To view streaming media using mobile phones, make sure the Network Camera is setup on the Internet. To utilize this feature, please check the Network Settings for your camera.
29 D-Link DCS-6111 User Manual Section 3 - Conguration Camera Logout: Logout the camera server and close the browser. Client Settings: Click this button to access the Client Settings. Snapshot: Capture a still picture of a video. This section shows your camera’s live video.
30 D-Link DCS-6111 User Manual Section 3 - Conguration 1/2 Digital Zoom - Refer to the previous page for more information. 3/4 Start/Stop Recording - Click (#3) to start recording. Video clips will be recorded in MP4 format to your computer. Press the button again (#4) to stop recording.
31 D-Link DCS-6111 User Manual Section 3 - Conguration Snapshot This page shows a snapshot image of a live video taken from DCS-6111 network camera.
32 D-Link DCS-6111 User Manual Section 3 - Conguration Stream Options: Media Options: Protocol Options: UDP Protocol: UDP Unicast: UDP Multicast TCP: HTTP Protocol: Record Options: Select which video stream prole to use. Th er e are 3 sele ctab le Medi a Opt ions for you r str eam prole.
33 D-Link DCS-6111 User Manual Section 3 - Conguration Setup Wizard To quickly congure your network camera, click In ter net Connection Setup Wizard . Otherwise, click Manual Internet Connection Setup to manua lly cong ure you r network camera.
34 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next Select PPPoE if the camera is directly connected to the Internet through a DSL modem and your ISP (Internet Service Provider) requires you to use PPPoE for the Internet connection.
35 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next If you hav e se le ct ed PPP oE , en te r yo ur use rn am e an d password. Click Next to continue. Select Static IP if you r Inte rnet Ser vi ce Pro vi der has pr ov id ed you wit h con nec ti on sett ing s, or you wi sh to set a static address within your home network.
36 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next Click Next With a Dynamic DNS account, the camera automatically updates your IP address. To enable DDNS , enter your host information. Click Next to continue. Enter a name for your camera and click Next t o continue.
37 D-Link DCS-6111 User Manual Section 3 - Conguration Click Apply Once you have selected Dynamic , PPPoE , or Static , you will see a summary of your camera’s settings.
38 D-Link DCS-6111 User Manual Section 3 - Conguration MotionDetectionSetupWizard This wizard will guide you through a step-by-step process to congure your new D-Link Camera’s motion detection functions. Click Next to begin the process.
39 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Select the recording time and date for your camera. Click Next to continue. Note: Recording camera footage will take up space on your hard drive. I t is recommended that you have sufficient disk space for Alway s function.
40 D-Link DCS-6111 User Manual Section 3 - Conguration Click Apply You have completed the Motion Detection Wizard. Click Apply to activate and save your settings.
41 D-Link DCS-6111 User Manual Section 3 - Conguration LAN Settings: DHCP: Static IP Client: IP Address: Subnet Mask: Default Gateway: Primary DNS: Secondary DNS: Enable UPnP Presentation: Settings for your local area network.
42 D-Link DCS-6111 User Manual Section 3 - Conguration Enabling UPnP port forwarding allows the Network Camera to open a secondary HTTP port on the router. You have to add the secondary HTTP port number behind the Network Camera’s public address in order to access the Network Camera from the Internet.
43 D-Link DCS-6111 User Manual Section 3 - Conguration Enter the IPv6 router address. Enter the IPv6 DNS address. Enable this setting if your ISP (DSL service) is using PPPoE. You may already have both Username and Password given by your ISP, or you may check with your ISP.
44 D-Link DCS-6111 User Manual Section 3 - Conguration Access name for stream2: HTTPS Port: FTP Port: RTSP Streaming: Authentication: Access name for stream1: Access name for stream2: The default name is video2.mjpg. Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming source.
45 D-Link DCS-6111 User Manual Section 3 - Conguration The accessibility of the RTSP streaming for the three authentication modes are listed in the following table.
46 D-Link DCS-6111 User Manual Section 3 - Conguration The port number that you use for RSTP streaming, the default port number is 554. RTP (Real Time Protocol) Port is used to streaming audio and video while RTCP (Real Time Control Protocol) port is used to monitor QoS of RTP stream.
47 D-Link DCS-6111 User Manual Section 3 - Conguration For example, if some content is associated with group 239.1.1.1, the source will send data packets destined to 239.1.1.1. Receivers for that content will inform the network that they are interested in receiving data packets sent to the group 239.
48 D-Link DCS-6111 User Manual Section 3 - Conguration Enable DDNS: Server Name: Host Name: Username: Password: Status: Click to enable the DDNS function. Select your Dynamic DNS provider from the drop down menu. Enter the host name of the DDNS server.
49 D-Link DCS-6111 User Manual Section 3 - Conguration Color: Power Line Frequency: Video Orientation: AGC: Exposure Level: Select either a Color or B/W (black and white, monochrome) video display. Select either 50 or 60Hz. Flip will vertically rotate the video.
50 D-Link DCS-6111 User Manual Section 3 - Conguration Enable WDR (Wide Dynamic Range): Switch to B/W (Night Mode): White Balance: Maximum Exposure Time: Brightness: Saturation: Contrast: Overlay Title and Time Stamp on Video: Privacy Mask: Select to enable the WDR function.
51 D-Link DCS-6111 User Manual Section 3 - Conguration Mode: Frame Size: Maximum frame rate: Video quality: Mute: Select either JPEG or MPEG4 . I n J P E G mode, the video frames are independent. Ho wev er , MP EG4 con sum es muc h les s ne two rk bandwidth than JPEG.
52 D-Link DCS-6111 User Manual Section 3 - Conguration Set the microphone input gain at either 0dB or 20dB. Note: The higher the decibel number , the louder the sound.
53 D-Link DCS-6111 User Manual Section 3 - Conguration Enable motion detection: Window name: Sensitivity: Percentage: New: Save: Check this option to turn on the motion detection feature. Create your own name for the monitored area/ window. It will show at the top of the motion window.
54 D-Link DCS-6111 User Manual Section 3 - Conguration 1. Click New to add a new motion detection window. 2. Enter a name in the Window Name eld. 3. Dene the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage slide bar.
55 D-Link DCS-6111 User Manual Section 3 - Conguration How does motion detection work? There are two parameters for setting the motion detection: Sensitivity and Percentage . In the illustration above, frame A and frame B are two sequential images.
56 D-Link DCS-6111 User Manual Section 3 - Conguration Current Server Time: Time Zone: Enable Daylight Saving: Daylight Saving Dates: Automatic Time Conguration: NTP Server: Update Interval: Set the date and time manually: Copy Your Computer’s Time Settings: Displays current time.
57 D-Link DCS-6111 User Manual Section 3 - Conguration EventSetup There are four sections in Event Setup page. • Event • Server • Media • Recording 1. To add a new item - event, server or media, click Add . A pop-up will appear and update the elds accordingly.
58 D-Link DCS-6111 User Manual Section 3 - Conguration Application A typical application is that when motion is detected, the DCS-6111 Network Camera sends images to a FTP server or via e-mail as notications.
59 D-Link DCS-6111 User Manual Section 3 - Conguration Server Name: Email: FTP: HTTP: Network Storage: Unique name of your server. Se le ct this to ena ble and app ly your ema il acco unt setting for your camera. Select this to access a granted folder on the external FTP server.
60 D-Link DCS-6111 User Manual Section 3 - Conguration Media Name: Snapshot: Source: Send pre-event image(s) [0~7]: Send post-event image(s) [0~7]: File name prex: Add date and time sufx to .
61 D-Link DCS-6111 User Manual Section 3 - Conguration Send post-event image (s) [0~7) Specify to capture the number of images after a trigger is activated.
62 D-Link DCS-6111 User Manual Section 3 - Conguration Maximum duration Specify the maximal recording duration in seconds. You can set up to ten seconds.
63 D-Link DCS-6111 User Manual Section 3 - Conguration Event name: Enable this event: Priority: Delay: Trigger: Video motion detection: Periodic: Digital input: System boot: Time: Trigger D/O: Enter a name for the event. Select to activate this event.
64 D-Link DCS-6111 User Manual Section 3 - Conguration Recording entry name: Enable this recording: Priority: Source: Recording schedule: Recording settings: Destination: Total cycling recording size Size of each le for recording: File Name Prex: The unique name of the entry.
65 D-Link DCS-6111 User Manual Section 3 - Conguration DI and DO: Digital input trigger condition: Digital output: Settings for both Digital input signal and digital output signal can be congured here. Please select High or Low for digital input trigger condition.
66 D-Link DCS-6111 User Manual Section 3 - Conguration ICR - IR-Cut Removable(ICR) lter is a switch mechanical design of two different sensor lters.
67 D-Link DCS-6111 User Manual Section 3 - Conguration Enable HTTPS secure connection: HTTP & HTTPS: HTTPS only: Select to enable a secure HTTPS connection. Select to enable the HTTP and HTTPS serv ice s. By default, this option is enabled. Select this to automatically redirect an HTTP connection to HTTPS .
68 D-Link DCS-6111 User Manual Section 3 - Conguration Method 3. Create certicate request and install: To upload a signed-certificate, ensure to create a certicate request. After creating the request, click Browse to upload the certicate le which has been signed by the third party.
69 D-Link DCS-6111 User Manual Section 3 - Conguration Allow list: Delete allow list: Deny list: Delete deny list: Always allow the IP address to access this device: The list of IP addresses that have the access rights to the camera. Remove the customized setting from the Allow List.
70 D-Link DCS-6111 User Manual Section 3 - Conguration For example: When the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range of denied list is set from 1.1.1.0 to 170.255.255.255, Only users’ IP located between 171.0.0.
71 D-Link DCS-6111 User Manual Section 3 - Conguration Maintenance DeviceManagement Admin password setup: Add user account: Username: Password: Privilege: Manage user: Authentication: Camera Name: Modify the password for the administrator’s account.
72 D-Link DCS-6111 User Manual Section 3 - Conguration Turn off the LED indicator: Restore: Reboot: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Click the Restore button to reset the camera back to its fact ory def aul t setti ngs .
73 D-Link DCS-6111 User Manual Section 3 - Conguration Current rmware version: Current rmware date: File Path: Upload: It will be automatically determined and displayed by the system. It will be automatically determined and displayed by the system.
74 D-Link DCS-6111 User Manual Section 3 - Conguration Status DeviceInfo This page displays all the details information about your device and network connection.
75 D-Link DCS-6111 User Manual Section 3 - Conguration Enable remote log: Log server settings: IP Address: Port: Save: Current Log: Click to enable this feature so that the camera can send camera log files to a remote server. Congure the settings for the log server.
76 D-Link DCS-6111 User Manual Section 3 - Conguration Help.
77 D-Link DCS-6111 User Manual Section 4 - Frequently Asked Questions FrequentlyAskedQuestions WDRD&NFixedDomeNetworkCameraFeatures 1. What is a WDR D&N Fixed Dome Network Camera? The WDR D&N Fixed Dome Network Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network.
78 D-Link DCS-6111 User Manual Section 5 - Fixed Dome Day & Night Network Camera With WDR Sensor Installation WDRD&NFixedDomeNetworkCameraInstallation 1. Can the Network Camera be used outdoors? The WDR D&N Fixed Dome Network Camera is not weatherproof.
79 D-Link DCS-6111 User Manual Section 5 - Fixed Dome Day & Night Network Camera With WDR Sensor Installation 8. I connected the Network Camera directly to a computer with a cross-over Ethernet ca.
80 D-Link DCS-6111 User Manual Appendix A - Networking Basics Networking Basics CheckyourIPaddress After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically.
81 D-Link DCS-6111 User Manual Appendix A - Networking Basics StaticallyAssignanIPaddress If you are not using a DHCP capable gateway/access point, or you need to assign a static IP addres.
Appendix B - Reset and Restore 82 D-Link DCS-6111 User Manual Reset and Restore Restoring the factory defaults will result in the loss of any previous settings and will require running the Installation Wizard to return the DCS-6111 to a normal state.
83 D-Link DCS-6111 User Manual Appendix B - External I/O Port ExternalI/OPort DI/DO Diagram Pin 1~4 are used to connect with digital input and digital output devices. Refer to the following illustration for connection method. The DCS-6111 provides a general I/O terminal block with one digital input and one relay switch for device control.
84 D-Link DCS-6111 User Manual Appendix C - Technical Specications T echnicalSpecications NETWORK PROTOCOL SUPPORT + IPv4, IPv6, TCP/IP, RTSP/ RTP/ RTCP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DHC.
85 D-Link DCS-6111 User Manual Appendix C - Technical Specications * HTTPS streaming will reduce the video frame rate automatically. + Real Player 10.5 NETWORK INTERFACE + IEEE 802.3/802.3u 10/100BASE-TX Ethernet port + Supports half/full-duplex operations + Supports 802.
Ein wichtiger Punkt beim Kauf des Geräts D-Link DCS-6111 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie D-Link DCS-6111 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für D-Link DCS-6111 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von D-Link DCS-6111 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über D-Link DCS-6111 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon D-Link DCS-6111 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von D-Link DCS-6111 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit D-Link DCS-6111. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei D-Link DCS-6111 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
