Benutzeranleitung / Produktwartung GCD-R542B des Produzenten Creative
Zur Seite of 70
CD ROM Upgrade 4X CD-ROM Drives User Guide On-line V ersion.
User ’ s Guide Infor mati on in this docume nt is subject to change w it hou t notice and does no t represen t a commit ment on the part of Cre ative T echnol ogy Ltd. The sof tware d escribed in this doc ument is fur nished under a licens e agree ment an d may be used or copie d only in accor dance with the terms of the li cense agree ment.
ii Regulatory Information The follo wing secti ons consi st th e notice fo r th e USA and Ca nada. Notice for the USA FCC Part 15: This equipment has been tested an d found to compl y with the limits for a Class B digital devi c e, pursua nt to Part 15 of the FCC Rules.
iii Safety Information CAUTION: This CD-ROM is intend ed to be instal led by the user in a CSA/TUV/UL cert ified /list ed IBM A T or compatible personal computers in the manufac turer ’ s de fined oper ator access ar ea.
ix Introduction This Us er’ s Gui de provides you with information to install and operate your CD-ROM drive. It als o provides you with information to install and use QuickCD, an ap plicati on that allows you to play audio CDs in DOS an d W ind ow s.
x Making a Copy of Y our Diskettes If you have not made a copy of the original di skettes, you s hould do so before inst alling the soft ware in your system.
xi Appendix B , “Resolving Hardware Con flicts” The base I/O addr ess or I RQ line of the I DE CD-ROM interface card might co nflict with the I/ O addr ess or IRQ lin e of other devices. R ead this append ix on how to resolve these conf licts by chan ging your card’ s jumpers.
x i i T ext Conventions The following tex t elements are used to help y ou distinguish dif ferent types of i nformation presented in t his guide : Key Combinations In this guide, the following conventions are used to help you identify different k ey stroke com binations: T able i: T ext co nven tions used in this guide.
xiii Icons In this guide, icons are used to highlight areas of text that require yo ur attention. T able iii:Icons u sed in this guide. Icon Use Informat ion or instruct ions that must not be t aken light ly an d shou ld be no ted . Cautions or warnings that you must pay attentio n to.
Know ing Y o ur CD - ROM Dr i v e 1-1 1 Knowing Y our CD-ROM Drive Y our CD-ROM drive is just like a CD player . It allows you to play audio CDs, sk ip and stop a track, an d eject the CD using software application (s ee Chapter 3, “Using QuickCD”).
K n ow i ng Y o u r C D - R O M D r i v e 1-2 The Drive’ s Front Panel This section des cribes the vario us controls on y our drive’ s front panel as shown i n Figu re 1-1. Stereo Phone Jack The Stereo Phone Jack allows you to conn ect a pair of earphone s to the drive.
Know ing Y o ur CD - ROM Dr i v e 1-3 Play/Ski p Button The Play/Skip bu tton allows you to play audio CDs when the CD-ROM dri ve is connected to your syst em’ s pow er supply . If your disc tray is ejected and loaded with a audio C D, pressing this button closes the tray and plays the audio CD.
K n ow i ng Y o u r C D - R O M D r i v e 1-4 W h en p l aci n g t h e d i sc o n to t h e tra y , h o l d t h e d i s c b y t h e i nn er a n d outer edges with the di sc label faci ng up as shown in Fi gure 1-2. The disc tray can be locked using the LOCKCD.
Know ing Y o ur CD - ROM Dr i v e 1-5 Please refrain from us ing excessive for ce to open the tray as this may damage your dri ve . The Drive’ s Rear Panel This section provides you with information on the connector s an d jumpers f ound on yo ur drive’ s back pane l as shown in Fi gure 1-5.
K n ow i ng Y o u r C D - R O M D r i v e 1-6 CD Audio Connector The CD Audio Co nnector allows y ou to direct audio outpu t from your CD-ROM drive to yo ur audio card when it is connected using a C D audio cable. Master/Slave Jumper The Master /Slav e Jumpe r (see Figure 1-6) all ows you t o set yo ur driv e as the Master or Slave drive.
Setting Up Y our C D-ROM Drive 2-1 2 Setting Up Y our CD-ROM Drive This chapter provides you with instructions to set u p your CD-ROM drive. Thes e instructions work: ❑ If you h ave purchased your CD-ROM dr ive as a stand- alone product or in a multim edia upgrade kit .
S e t t i n g Up Y ou r C D - R OM Dr i v e 2-2 If you have purchased th e drive with an IDE CD-ROM interface car d, get the interface card read y (see Figure 2-2). If you have an audio card i nstalled in y our system, get a CD audio cable ready (see Figure 2-3).
Setting Up Y our C D-ROM Drive 2-3 Inserting Y our Drive into Y our System T o insert yo ur drive into your system: 1. Switch of f your system and all peripheral devices. 2. T ouch a meta l plate on yo ur system to ground yours elf and dischar ge any static electricity .
S e t t i n g Up Y ou r C D - R OM Dr i v e 2-4 4. Locate a 5¼" drive b ay for your CD-ROM drive. 5. V acate a drive bay . If a disk drive is positio ned above your vacant drive bay , loosen the scr ews of your disk drive and slide i t out by two to three inches.
Setting Up Y our C D-ROM Drive 2-5 6. Insert your CD-ROM drive into the vacant d rive bay as shown in Figure 2- 6. Do not slide the drive completely in to the vacant drive bay . Leave some space at the rear so that it is eas ier for you to connect cables t o your drive.
S e t t i n g Up Y ou r C D - R OM Dr i v e 2-6 2. Connect the p ower cable to the CD-ROM drive as shown in Figure 2- 7. 3. Connect the d ata cable to the CD-ROM drive as shown in Figure 2-8 . Make su re you align t he colored wi re on the cable to Pin 1 of the IDE CD-ROM Data Connector .
Setting Up Y our C D-ROM Drive 2-7 4. If yo u are connecting your drive to an aud io card, connect the CD audio cable to the CD- ROM drive as shown in F igure 2-9. Connecting Cables to Y our Card After connecting the cables to the CD-ROM’ s rear panel, you need to connect these cables to your audio or IDE CD-ROM interface card.
S e t t i n g Up Y ou r C D - R OM Dr i v e 2-8 Connecting Cables to Y our Audio Card T o connect the CD audio and data cables to your audio card (which has an IDE CD-ROM interface): 1. Connect the d ata cable to your aud io card as shown in Figure 2- 10.
Setting Up Y our C D-ROM Drive 2-9 3. Slide the drives back into p lace and fasten them to your system as shown in Figure 2-1 2. 4. Switch on your syst em.
S e t t i ng U p Y o u r C D - R O M D r i v e 2-10 T o install the interface card: 1. Locate a vacant 16 -bit slot in your system (see Figure 2 -13). 2. Remov e the metal plate fro m the slot you have chosen and pu t the screw aside (s ee Figure 2-14).
Setting Up Y our CD-ROM D riv e 2 -1 1 3. Align the IDE CD -ROM interface card’ s gold-stripped connector with the expansion slot and gently lower it into the slot (see F igure 2-15). 4. Secure the interface card to the expansion s lot with the screw you remov ed from th e metal plate (s ee Figure 2-16) .
S e t t i ng U p Y o u r C D - R O M D r i v e 2-12 T o connect the drive to the interface card : 1. Connect the data cable to your IDE CD-ROM interface card as shown in Figu re 2-17 . Make s ure you a lign th e color ed wire on the cable to Pin 1 of the IDE CD-ROM Data Connector .
Setting Up Y our CD-ROM Driv e 2 -13 3. If yo u do not hav e an audio card i nstalled in y our system, connect a headpho ne or powered speakers to the Stereo Phon e Jack on y our drive’ s front panel. Set the vol ume controls of your dri ve and powered sp eakers to minim um before powering on (or resetting) the system.
S e t t i ng U p Y o u r C D - R O M D r i v e 2-14 Figure 2-20: Connect ing dat a cab le to your hard disk..
Setting Up Y our CD-ROM Driv e 2 -15 3. Connect the d ata cable to your har d disk controller card as shown in Fig ure 2-21. Make sure you align the colored wire on the cable t o Pin 1 of your Hard Di sk Data Co nnector . Y our h ard disk con troller card may dif fer from the on e shown i n Figure 2-2 1.
S e t t i ng U p Y o u r C D - R O M D r i v e 2-16 4. If you have an audio card ins talled in your system, connect the audio cable to the CD Audio Connecto r on the audio card a s shown i n CD Figur e 2-22.
Setting Up Y our CD-ROM Driv e 2 -17 6. Slide the drives back into p lace and fasten them to your system as shown in Figure 2-2 3. 7. Switch on your syst em.
S e t t i ng U p Y o u r C D - R O M D r i v e 2-18 The installation program creates a directory to store the accompan ying software. The pr ogram adds the followin g statements to your AUTOEXEC.BA T and CONFIG.SYS files respectively: AUTOEXEC.B A T : C: path MSCDEX /D:MSCD001 /M:8 /V CONFIG.
Setting Up Y our CD-ROM Driv e 2 -19 TESTCD does the following: ❑ Checks that the drive is pro perly set u p. If you see a MSCDEX er ror message, check that SBIDE.SYS is properly installed (see the section “Changing the Driver Settings” in Chapter 4).
Using QuickCD 3-1 3 Using QuickCD QuickCD allows yo u to play au dio CDs in DOS and W i ndows. Like your CD player , QuickCD is easy and fun to op erate.
U s i n g Q u i c k C D 3-2 3. At t h e DOS pr o mpt, t y pe QCD and press <Enter>. The QuickCD screen s imilar to Figure 3 -1 appears. If you h ave more than on e drive, this program all ows you to specify the desired drive at the DOS prompt. For example, to play the au dio disc from your F d rive, type QCD /D:F and press <Ente r>.
Using QuickCD 3-3 Next T rack button Plays the next track. If it is the end of the CD, the first track is played. Previous T rack bu tton Plays the previo us track. If it is the start o f the CD, the last track is played. Fast Forward button Forwards the curr ent track by 16 second s.
U s i n g Q u i c k C D 3-4 Quitting DOS QuickCD T o q uit DOS Qu ickCD, do one of the following: ❑ Press <Esc>. ❑ Click on the Title box. Running W indows QuickCD Before you can use W indo ws QuickCD, you need to ❑ Set it up in W indows ❑ Install the MCICDA.
Using QuickCD 3-5 3. Select Program Item and choose OK. The Prog ram Item Proper ties dialo g box simil ar to Figure 3 -3 appears. 4. T ype in th e descripti on as show n in Fig ure 3-3. 5. Choo se OK. The QuickCD icon appears in the Accessories group window .
U s i n g Q u i c k C D 3-6 2. Double-click the Drivers icon in the Control Panel group window . The Drivers dialo g box similar to Figure 3 -5 appears.
Using QuickCD 3-7 6. Choo se OK. 7. Restart W ind ows for the changes to take effect. Starting W indows QuickCD After you set up W indows Q uickCD, yo u can run the p rogram from your Accessor ies group window . T o run W indows QuickCD: 1. Double -click the QuickCD icon i n your Acces sories group window .
U s i n g Q u i c k C D 3-8 Play bu tton Plays the track shown in th e Display box. Stop button Stops the track. Pause button Pauses or resumes the track. Previous T rack bu tton Plays the previous track. If it is the start o f the CD, the last track is played.
Using QuickCD 3-9 Press <T ab> to choose a button . Press <Enter> to start the selected operation. Move the Slider thumb with the left or right arrow key to forward or rewind the current track.
U s i ng Q u i c k C D 3-10 Play Plays the current track. Stop Stops the track. Pause P auses or resumes the track. Skip Selects the next track and plays it. If it is the end of the CD, the first track is played. Always on T op Displays QuickCD on top of the active wind ow .
Using QuickCD 3-1 1 ❑ Minimize on play Minimizes QuickCD to an icon when playing audio CD. ❑ Stop pl ayback on exit Stops an audio CD wh en you exit QuickCD. 3. Choo se OK. Quitting W indows QuickCD T o quit W ind ows QuickC D, do one of the followi ng: ❑ Choose the On/Of f button.
Doing More with Y our CD-ROM Drive 4-1 4 Doing More with Y our CD-ROM Drive This chapter comprises several sections to help you get mo re out of your CD-ROM dr ive.
D o i ng M o r e w i t h Y o u r C D - R O M D r i v e 4-2 mechanism created by Micr osoft to read large files, and it gives your PC the capability to communicate with y our CD-RO M driv e. The presence of thes e two drivers are reflected b y the following statements in t he CONFIG.
Doing More with Y our CD-ROM Drive 4-3 The descriptions of the parameters are as follows: Parameter Description path Specifies the directory where the driver is stored. /D: device Specifies the nam e of the CD-ROM d rive. This must b e identical to the device name specified by the MSCDEX statement in the AUT OEXEC.
D o i ng M o r e w i t h Y o u r C D - R O M D r i v e 4-4 MSCDEX.EXE Settings The syntax of the MSCDEX.EXE statement in AUTOEXEC.BA T is: C: path MSCD EX /D: devi ce /M: xx [/L: drive ] [/ E] /V [ ] in the abo ve statement refers to an y optional parameters.
Doing More with Y our CD-ROM Drive 4-5 Running CDSETUP After yo u have inst alled your sof tware, yo u can run CDSETU P to change the ba se I/O address and IRQ line of you r IDE interface. T o change the base I/O ad dress and I RQ line of your car d, you need to chang e the jumper setting on y our audio or IDE CD-ROM interface card.
D o i ng M o r e w i t h Y o u r C D - R O M D r i v e 4-6 d1 , d2 , d3 , and d4 refer to the drives you want to lock. For example, to lock the disc trays for drives D, E, and F , type LOCKCD D: E: F: and press <Ent er>. Once you have lock ed the tray , it can only be ejected if you run UNLOCKCD.
Doing More with Y our CD-ROM Drive 4-7 Enabling and Disabling Jumpers A jumper exists in two states: enabled or disabl ed. A jumper is enabled when a plastic hood called a jumper block is placed ov er the jump e r ’ s two pi ns as sh own in Fi gure 4- 1.
D o i ng M o r e w i t h Y o u r C D - R O M D r i v e 4-8 2. Set yo ur drive by placing th e jumper blocks on the desi red jumper as shown in F igure 4-3. The jumper l abeled CS i s reserved and should not be used. Figure 4-3: The availab le ID Jump er settings.
Doing More with Y our CD-ROM Drive 4-9 Connecting the Drives After you hav e set your d rive as the Master or Slave drive, y ou can connect it to your existing dr ive using a daisy-chain cable as shown in Figure 4 -4.
T echni cal Dat a A-1 A T echnical Data This appen dix provides you with the tech nical specifications of your driv e. Physical Dimensions Height 41.5 mm W idth 146.
T e c h n i c a l D a ta A-2 Power Supply 5 V olts ± 5% 12 V o lts ± 10% Current Drain 0.35 Amp ( Max.) ± 5 V olts 0.8 Amp (Max .) ± 12 V olts T ypical Audio Performance Frequenc y Respons e 20 Hz t o 20 kHz ± 3 dB Signal to Noise Rat io 85 dB T otal Harmo nic Disto rtion (at 1 kHz) 0.
Resolving H a r dware Conflicts B -1 B Resolving Hardware Conflicts This appendix provides you with information on the hardware settings of the I DE CD-ROM interface card. It shows you how to chan ge the Base I/O address an d IRQ line if conflicts occur between the IDE CD-ROM interface card and other devices.
Re s o l v i ng H a r d w a r e C o n fl i c t s B-2 Changing Base I/O Address If I/O address con flicts occur between the I DE CD-ROM interface card and other devices, you need to chang e the base I/O addres s of the IDE CD-ROM interface card or th at of the conflicting device.
Resolving H a r dware Conflicts B -3 3. Place the jumper block on the interface card to select the desired base I/O addres s as sho wn in Figure B -1 . A jump er block is a removable plas tic hood that fits over a pair of pins. 4. Run CDSETUP or the installation program to update th e setting in your CONFIG.
Re s o l v i ng H a r d w a r e C o n fl i c t s B-4 Changing IRQ Line Four IRQ Lines are available fo r your IDE CD -ROM interface card: 10, 1 1 (fact ory defau lt s ett ing), 12 and 15. Ref e r to T able B -2 f or t he standard IRQ line assigned to the different IDE port.
Resolving H a r dware Conflicts B -5 T o change the IRQ line, enab le the jumpers corr esponding to the setti ngs shown in Figur e B-2 . T o ensure that your changes to the IDE CD-ROM interface settings are ef fected, make corr esponding changes to the hardware device driver settings.
T r oublesho oting C-1 C T roubleshooting This appendix hel ps you trou bleshoot so me common pro blems yo u might face. Problems with CD-ROM D rive Probl em No sound from speakers. Causes 1. Audio cable is not conn ected properly or the volume is not adjusted to an audible level.
T r ou b l e sho o t i ng C-2 Problem Interface car d or CD-ROM drive is not ready . Caus es 1. The power or data cable is no t connected. 2. MSCDEX.EXE or SBIDE.SYS is not lo aded. 3. Some BIOS that include po wer management features use IRQ 1 2 or 15.
T r oublesho oting C-3 Probl em I do not know how to specify the settings for the MSCDEX dr iver when I have two or more CD-ROM drives us ing dif ferent device drivers in my system. For example, I have a Creative IDE and another C D-ROM drive connected to my system.
Glossary D-1 D Glossary CD-ROM/XA CD-ROM Extended Architecture. An ext ende d CD-R OM for mat de velo ped by Philips, Sony , and Microsoft that allows computer data, compressed audio data, and video/picture data to share a single track. DA T Digital Audio T ap e.
G l o s s a ry D-2 T rack A logical region of a disc. Each track can contain soun d, animation, video, or othe r computer data..
T echn ical S upport E-1 E T echnical Support W e are committed to gi ving you the best prod uct as well as the best technical support. When you contact us , please have the following information: ❑ Hardware configuration in formation such as the bas e I/O address, IRQ, or DMA ch annel used.
T e c h n i c al Su p port E-2 Inside Europe CREA TIVE LABS (IRELAND) L TD. T echnical Support Ballyc ooli n B usines s Park Blancha rdstown Dublin 15 Ireland Ireland T el : +353 1 820 7555 Fax : +353.
T echn ical S upport E-3 FaxBack is a facility that allows you to obtain product and technical information through facsimile services. In Europe, use the foll owing number : +353 1 8 20 3667 Througho ut the rest of Europ e, please direct all faxes to Ireland.
T e c h n i c al Su p port E-4 If you are alrea dy a member of Compuserve All you need to do to access the forum is: ❑ At the Compuserve pro mpt, Ty p e Go Blaster and pres s <Ent er>. If you are not a member of Compuserve (valid only in U.S.A.
Ein wichtiger Punkt beim Kauf des Geräts Creative GCD-R542B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Creative GCD-R542B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Creative GCD-R542B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Creative GCD-R542B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Creative GCD-R542B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Creative GCD-R542B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Creative GCD-R542B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Creative GCD-R542B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Creative GCD-R542B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
