Benutzeranleitung / Produktwartung 486.24504 des Produzenten Craftsman
Zur Seite of 28
Operators Manual CRAFI".SHAN+ I H.P. SOFT TOP SYSTEM AND CART Model No. 486.24504 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions.
WARRANTY ............................................................... 2 SAFETY RULES ........................................................ 3 ACCESSORIES AND ATTACHMENTS ................... 5 FULL SIZE HARDWARE CHART .............................
Any power equipment can cause injury if operated improperly or if the user doesnot understand howto operate the equipment. Exercise caution at all times, when using power equipment. • Read and follow all instructions in this manual before attempting to assemble or operate this equipment.
TO AVOID SERIOUS INJURY • Read Owner's Manual and all safety labels on machine before starting and using machine. • Do Not remove top cover or attempt to empty contents of cart while engine is running. • Do Not stand behind cart in exhaust discharge area while engine is running.
These accessories were available when the unit was purchased. They are also available at most Sears retail outlets and service centers. Most Sears stores can order repair parts for you when you provide the model numbers of your tractor and Vac System.
A jT jU I I SHOWN FULL SIZE N J W J X Y I BB _J J CC NOT SHOWN FULL SIZE DD EE J 6.
ATTENTION! Keep contents of each hardware package separate for easier assembly. Ref. Qty. Description CONTENTS OF LARGE VAC HARDWARE PACKAGE A 3 Bolt, Hex 3/8" x 3" B 2 Shoulder Bolt C 1 Hex.
jl 3 _18 19 6 J 10 J 11 22 _ 29 25 J 31 j21 33 CARTON CONTENTS Ref. Qty. Description 1 1 Cover 2 2 Top Connecting Tube 3 2 Support Tube, R.H. 4 2 Support Tube, L.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel andengine oil recommendations. TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver (1) Pliers (1) 3/8" Wrench (2) 7/16" Wrenches (2) 1/2" Wrenches (2) 9/16" Wrenches (1) 3/4" Wrench - (2) if hitch plate in fig.
• Pull the cartbody halves together. • Tightenthe four truss head bolts. Tightenthe six hex bolts in the sides of the cart. Tightenthe three hex bolts in the bottom of the cart, keeping the bottom aligned.
Assemble a spacer tube ontoeach end of the axle as shown in figure 7. Assemble a 1"flatwasher, a wheel (valve stem facing out), andanother 1"flatwasher onto the axle as shown in figure 7. Secure the wheel witha 1/8" x 1-1/2" cotter pin, spreading the ends so thata hub cap wilt fit over the pin.
Assemble the reduced ends of the R.H. support tubes into the ends of the L.H. support tubes. Fasten the tubes together using two 1/4" x 1"curved head bolts, inserted from the top,andtwo 1/4" (SEMS) hex nuts. See figure 11. 1/4" x 1" CURVED HEAD BOLT "_ I / 1/4" HEX NUT (SEMS) SUPPORT TUBE L.
• Assemble a plastic wheel to each engine mount bracket using a 3/8" shoulder bolt and 3/8" hex lock nut. See Figure 14. 3/8"SHOULDER FIGURE 14 Attach the vac tongue to your tractor's draw bar for easier mounting of the engine base assembly.
• Place the hose hanger rod assembly down into the hose hanger bracket on the impeller housing assem- bly. See figure 18. • Loop the 25" tarp strap under the hose.
ASSEMBLING THE #62468 DECK ADAPTER TO THE MOWER DECK NOTE: Not all of the parts in the deck adapter hardware package will be used for any one particular fit up. • Remove the mower discharge deflector from your mower deck. Save the deflector and hardware for remounting deflector.
• Assemble the adapter bracket to the deck using two 5/16" x 1" hex bolts, 5/16" flat washers and 5/16" hex lock nuts. See figure 25. NOTE: It may be necessary to use extra 5/16" flat washers to shim under the bracket next to the deck surface.
FOR 1990 AND NEWER MURRAY TRACTORS WITH A 46" DECK Tape 46" template onto deck adapter. Mark and then cut out adapter. Fasten the angle bracket and the mounting bracket to the mower deck as shown in figure 34. Use two 5/16" x 3/4" carriage bolts, 5/16" flat washers and 5/16" lock nuts.
KNOW YOUR VAC SYSTEM Read this owner's manual and safety rules before operating your Vac System. Compare the illustration below with your Vac System to familiarize yourself with the various controls and their locations.
HOW TO START YOUR VAC SYSTEM _, ARNING: Never start or run the engine without all covers being properly attached to the blower housing and cart. • Check oil and gas in Vac engine. • Attach spark plug wire to spark plug. • Move choke lever on engine to CHOKE position.
CUSTOMER RESPONSIBILITIES • Read and follow the maintenance schedule and the maintenance procedures listed in this section. MAINTENANCE SCHEDULE _e_&_ _,o_ e Fill in dates as you ,_ e_-_e_ complete regular service.
• Clean the engine and the entire unit thoroughly. • Refer to engine manual for correct engine storage instructions. • If storing in an unventilated or metal storage shed, coat metal parts withlight oil or silicone to prevent rust. • Store unit in a clean, dry area.
REPAIR PARTS FOR MODEL 486.24504 CART BODY 11 8 10 8 5 9 i 13 17 27 19 16 12 32 / 12 / 23 24 --_ REF. NO. ) ) i PART NO. 24096 62457 23487 24497 24984 43594 43093 43601 48637 43014 43866 46978 1509-69 HA20186 43814 23490 46980 QTY. REF. PART DESCRIPTION NO.
REPAIR PARTS FOR MODEL 486.24504 VAC SYSTEM IMPELLER HOUSING ASSEMBLY REF NO. PART QTY. DESCRIPTION NO. 1 629-0241A 1 Harness, Wire 2 24634 1 Housing Ass'y.
REPAIR pARTS FOR MODEL 486.24504 VAC SYSTEM j_ f J 23 45 22 j 18 ADAPTER #62466 8_ 27 12_ 32 13 / J 27 13 12 / 4O J S 27 37 39 9 19 19 14 16 24.
REPAIR PARTS FOR MODEL 486.24504 VAC SYSTEM REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3O 31 32 PART NO. 734-0973 24957 24956 43182 43063 43085 738-0373 430.
26.
O e= 'o e- e= o O • -, e= ;'_== _ o_ == _.=o 0 ._.._o .E_o_ ,0.,., ,m =1 ,,,c ,- e- _o, _ _ "r-E5 _ _ 0 _o-_ | CAUTION: Do not operate your tractor and Vac System on a slope in excess of 10 degrees. Be sure of your tractor's towing and braking capabilities before operating on a slope.
Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anyt,me, day or n,ght (1-800-469-4663) www.
Ein wichtiger Punkt beim Kauf des Geräts Craftsman 486.24504 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Craftsman 486.24504 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Craftsman 486.24504 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Craftsman 486.24504 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Craftsman 486.24504 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Craftsman 486.24504 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Craftsman 486.24504 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Craftsman 486.24504. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Craftsman 486.24504 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
